Logic-in-memory based on an atomically thin semiconductor.

The growing importance of applications based on machine learning is driving the need to develop dedicated, energy-efficient electronic hardware. Compared with von Neumann architectures, which have separate processing and storage units, brain-inspired in-memory computing uses the same basic device structure for logic operations and data storage1-3, thus promising to reduce the energy cost of data-centred computing substantially4. Although there is ample research focused on exploring new device architectures, the engineering of material platforms suitable for such device designs remains a challenge. Two-dimensional materials5,6 such as semiconducting molybdenum disulphide, MoS2, could be promising candidates for such platforms thanks to their exceptional electrical and mechanical properties7-9. Here we report our exploration of large-area MoS2 as an active channel material for developing logic-in-memory devices and circuits based on floating-gate field-effect transistors (FGFETs). The conductance of our FGFETs can be precisely and continuously tuned, allowing us to use them as building blocks for reconfigurable logic circuits in which logic operations can be directly performed using the memory elements. After demonstrating a programmable NOR gate, we show that this design can be simply extended to implement more complex programmable logic and a functionally complete set of operations. Our findings highlight the potential of atomically thin semiconductors for the development of next-generation low-power electronics.

Reliable Low-Current and Multilevel Memristive Electrochemical Neuromorphic Devices with Semi-Metal Sb Filament.

Memristors are used in artificial neural networks owing to their exceptional integration capabilities and scalability. However, traditional memristors are hampered by limited resistance states and randomness, which curtails their application. The migration of metal ions critically influences the number of conductance states and the linearity of weight updates. Semi-metal filaments can provide subquantum conductance changes to the memristors due to the smaller single-atom conductance, such as Sb (≈0.01 G0 = 7.69 × 10-7 S). Here, a memristor featuring an active electrode composed of semi-metal Sb is introduced for the first time. This memristor demonstrates precise conductance control, a large on/off ratio, consistent switching, and prolonged retention exceeding 105 s. Density functional theory (DFT) calculations and characterization methods reveal the formation of Sb filaments during a set process. The interaction between Sb and O within the dielectric layer facilitates the Sb filaments' ability to preserve their morphology in the absence of electric fields.

Polyarene Oxides with Tunable Quinone Units for Photocatalytic CO2 Reduction: A Simple Strategy toward Effective and Selective Catalysts.

The photocatalytic transformation of carbon dioxide (CO2) into valuable chemicals is a challenging process that requires effective and selective catalysts. However, most polymer-based photocatalysts with electron donor-acceptor (D-A) structures are synthesized with a fixed D-A ratio by using expensive monomers. Herein, we report a simple strategy to prepare polyarene oxides (PAOs) with quinone structural units via oxidation treatment of polyarene (PA). The resultant PAOs show tunable D-A structures and electronic band positions depending on the degree of oxidation, which can catalyze the photoreduction of CO2 with water under visible light irradiation, generating CO as the sole carbonaceous product without H2 generation. Especially, the PAO with an oxygen content of 17.6% afforded the highest CO production rate of 161.9 µmol g-1 h-1. It is verified that the redox transformation between quinone and phenolic hydroxyl in PAOs achieves CO2 photoreduction coupled with water oxidation. This study provides a facile way to access conjugated polymers with a tunable D-A structure and demonstrates that the resultant PAOs are promising photocatalysts for CO2 reduction.

Effect of silencing SSB1 gene on the expression of NBS1 in irradiated rat submandibular gland cells.

The salivary gland (SGS) is a kind of organ vulnerable to ionizing radiation. Radiotherapy is an important treatment for head and neck tumors, but in the process of radiotherapy, tumor cells will be injured by radiation to a certain extent. Infrared-induced DNA double-strand break (IR-DSBs) is one of the most serious DNA damage. DNA repair proteins such as Nymegan rupture syndrome protein 1 (NBS1) play a key role in the identification and repair of DNA damage. but the interaction between SSB1 and NBS1 has not been elucidated. In this study, we irradiated rat submandibular gland (SMG) cells, which were either infected with a rAdE5-SSB1-1p2-shRNA recombinant adenovirus to silence SSB or a control virus, to explore the effect of IR on the expression NBS1 in the absence of SSB. Our results showed that the SSB1 mRNA transcripts and protein expression of SSB1 and NBS1 initially increased and decreased later with increased doses. The relative expression reached the highest levels when the SMG cells were irradiated with 2Gy of IR. Silencing the SSB1 gene suppressed the expression of both SSB1 and NBS1 regardless of irradiation. The expression of NBS1 decreased when the SSB1 gene was silenced. We concluded that IR affected the expression of both SSB1 and NBS1 and there is a synergistic effect on IR-induced NBS1 suppression and DSBs repair in SMG cells. These observations shed light on further investigation and elucidation of IR-caused DNA repair mechanisms.

Ionic-Liquid-Catalyzed Approaches under Metal-Free Conditions.

ConspectusMetal-free catalysis is a promising protocol to access chemicals without metal contamination. Ionic liquids (ILs) that are entirely composed of organic cations and inorganic/organic anions have emerged as promising alternatives to molecular solvents and metal catalysts due to their unique properties such as structural tunability, the coexistence of multiple interactions among ions (e.g., electrostatic interaction, hydrogen bonding, van de Waals forces, acid/base interactions, hydrophilic/hydrophobic interactions, etc.), unique affinity for a wide range of chemicals, good chemical and thermal stability, and quite low volatility. ILs have shown potential applications in various chemical processes.In this Account, we systematically described our most recent work on IL-catalyzed approaches under metal-free conditions. The first section presents the IL-catalyzed strategies toward the transformation of CO2 to value-added chemicals, focusing on the CO2-reactive IL-catalyzed CO2 transformation to various heterocycles and the IL-catalyzed reductive transformation of CO2 to chemicals. In these approaches, we designed task-specific ILs that are able to chemically capture and activate CO2 via forming anion-based carbonate/carbamate or cation-based carboxylate/carbamate intermediates, thus further accomplishing its transformation to a series of heterocycles including quinazoline-2,4(1H,3H)-diones, cyclic carbonates, 2-oxazolidinones, oxazolones, and benzimidazolones under metal-free conditions. For the IL-catalyzed approaches to reducing CO2 with hydrosilanes to chemicals, we employed ILs capable of activating the Si-H bond in hydrosilanes and the N-H bond in amine substrates via H-bonding, thus achieving the reductive transformation of CO2 to formamides, benzimidazoles, and benzothiazoles via cooperative catalysis. The second section describes our finding on the IL-catalyzed hydration of the C≡C bond in propargylic alcohols. Azolate anion-based ILs that can chemically capture CO2 via the formation of carbamates could serve as robust nucleophiles to attack the C≡C bond in propargylic alcohols and then efficiently catalyze the hydration of propargylic alcohols to produce α-hydroxy ketones with the assistance of atmospheric CO2 gas under metal-free conditions. The third section unveils the cooperative catalysis strategy of hydrogen bond donors and acceptors of ILs for chemical reactions. In the hydrogen-bonding catalysis protocols, cations of the ILs act as H-bond donors and anions, as acceptors, forming H-bonds with the reactant molecules, respectively, in opposite ways, which can cooperatively catalyze the ring-closing C-O/C-O bond metathesis reactions of aliphatic diethers to O-heterocycles, the dehydrative etherification of alcohols to ethers, and direct oxidative esterification of alcohols to esters. We believe that these IL-catalyzed metal-free processes and strategies display promising practical applications, and their commercialization would bring great benefits to the production of the as-afforded value-added chemicals.

Mechanics-based design of lithium-ion batteries: a perspective.

From the overall framework of battery development, the battery structures have not received enough attention compared to the chemical components in batteries. The mechanical-electrochemical coupling behavior is a starting point for investigation on battery structures and the subsequent battery design. This perspective systematically reviews the efforts on the mechanics-based design for lithium-ion batteries (LIBs). Two typical types of mechanics-based LIB designs, namely the design at the preparation stage and that at the cycling stage, have been discussed, respectively. The former systemizes the structure design of multiscale battery components from the particle level to the cell level. The latter focuses on the external mechanics-related control, including external pressures and charge-discharge protocols, of in-service LIBs. Moreover, the general problems currently being faced in the mechanics-based LIB design are summarized, followed by the outlook of possible solutions.

Resection of inferior vena cava, abdominal aorta, bilateral common iliac arteries, and bilateral partial external iliac arteries with artificial vessel replacement during radical endometrial cancer surgery: a case report.

BACKGROUND: Endometrial carcinoma (EC) is a common malignant tumor of the female reproductive system, often accompanied by lymph node metastasis. Artificial vascular implantation is a common surgical treatment for mediastinal tumors and abdominal aortic aneurysms but is rarely used in gynecological surgery. CASE PRESENTATION: A 54-year-old female patient was first admitted to the hospital in January 2018 due to "irregular vaginal bleeding over 3 months". CT showed a mass in the uterine cavity, and several swollen lymph nodes in the retroperitoneum and pelvic cavity. The initial diagnosis was an endometrial malignant tumor. We performed radical endometrial cancer surgery with parallel resection of inferior vena cava, abdominal aorta, bilateral common iliac arteries, bilateral external iliac arteries, and artificial vessel replacement, which was successful, with good postoperative recovery and no lesion progression at 3 years postoperative follow-up. CONCLUSION: This is an early case of gynecological clinical use of prostheses. Through multidisciplinary cooperation, the surgical resection rate of patients with EC in radical surgery was improved without serious fatal complications and achieved a high long-term postoperative survival rate.

Risk of primary osteoporosis score (RPOPs): an algorithm model for primary osteoporosis risk assessment in grass-roots hospital.

BACKGROUND: This study aimed to develop and validate a lasso regression algorithm model which was established by correlation factors of bone mineral density (BMD) and could be accurately predicted a high-risk population of primary osteoporosis (POP). It provides a rapid, economical and acceptable early screening method for osteoporosis in grass-roots hospitals. METHODS: We collected 120 subjects from primary osteoporosis screening population in Zhejiang Quhua Hospital between May 2021 and November 2021 who were divided into three groups (normal, osteopenia and osteoporosis) according to the BMD T-score. The levels of three micro-RNAs in the plasma of these people were detected and assessed by qRT-PCR. At the same time, the levels of ß-CTX and t-P1NP in serum of the three groups were determined. Based on the cluster random sampling method, 84 subjects (84/120, 70%) were selected as the training set and the rest were the test set. Lasso regression was used to screen characteristic variables and establish an algorithm model to evaluate the population at high risk of POP which was evaluated and tested in an independent test cohort. The feature variable screening process was used 10-fold cross validation to find the optimal lambda. RESULTS: The osteoporosis risk score was established in the training set: Risk of primary osteoporosis score (RPOPs) = -0.1497785 + 2.52Age - 0.19miR21 + 0.35miR182 + 0.17ß-CTx. The sensitivity, precision and accuracy of RPOPs in an independent test cohort were 79.17%, 82.61% and 75%, respectively. The AUC in the test set was 0.80. Some risk factors have a significant impact on the abnormal bone mass of the subjects. These risk factors were female (p = 0.00013), older than 55 (p < 2.2e-16) and BMI < 24 (p = 0.0091) who should pay more attention to their bone health. CONCLUSION: In this study, we successfully constructed and validated an early screening model of osteoporosis that is able to recognize people at high risk for developing osteoporosis and remind them to take preventive measures. But it is necessary to conduct further external and prospective validation research in large sample size for RPOPs prediction models.

Novel melamine-based porous organic polymers: synthesis, characterizations, morphology modifications, and their applications in lithium-sulfur batteries.

Lithium-sulfur (Li-S) batteries have been considered to be one of the most promising energy storage devices in the next generation. However, the insulating properties of sulfur and the shuttle effect of soluble lithium polysulfides (LiPSs) seriously hinder the practical application of Li-S batteries. In this paper, a novel porous organic polymer (HUT3) was prepared based on the polycondensation between melamine and 1,4-phenylene diisocyanate. The micro morphology of HUT3 was improved byin situgrowth on different mass fractions of rGO (5%, 10%, 15%), and the obtained HUT3-rGO composites were employed as sulfur carriers in Li-S batteries with promoted the sulfur loading ratio and lithium-ion mobility. Attributed to the synergistic effect of the chemisorption of polar groups and the physical constraints of HUT3 structure, HUT3-rGO/S electrodes exhibits excellent capacity and cyclability performance. For instance, HUT3-10rGO/S electrode exhibits a high initial specific capacity of 950 mAh g-1at 0.2 C and retains a high capacity of 707 mAh g-1after 500 cycles at 1 C. This work emphasizes the importance of the rational design of the chemical structure and opens up a simple way for the development of cathode materials suitable for high-performance Li-S batteries.

Advanced Lithium Metal-Carbon Nanotube Composite Anode for High-Performance Lithium-Oxygen Batteries.

The low Coulombic efficiency and hazardous dendrite growth hinder the adoption of lithium anode in high-energy density batteries. Herein, we report a lithium metal-carbon nanotube (Li-CNT) composite as an alternative to the long-term untamed lithium electrode to address the critical issues associated with the lithium anode in Li-O2 batteries, where the lithium metal is impregnated in a porous carbon nanotube microsphere matrix (CNTm) and surface-passivated with a self-assembled monolayer of octadecylphosphonic acid as a tailor-designed solid electrolyte interphase (SEI). The high specific surface area of the Li-CNT composite reduces the local current density and thus suppresses the lithium dendrite formation upon cycling. Moreover, the tailor-designed SEI effectively separates the Li-CNT composite from the electrolyte solution and prevents the latter's further decomposition. When the Li-CNT composite anode is coupled with another CNTm-based O2 cathode, the reversibility and cycle life of the resultant Li-O2 batteries are drastically elevated.

Hydrogen-Bonding Catalyzed Ring-Closing C-O/C-O Metathesis of Aliphatic Ethers over Ionic Liquid under Metal-Free Conditions.

O-heterocycles have wide applications, and their efficient and green synthesis is very interesting. Herein, we report hydrogen-bonding catalyzed ring-closing metathesis of aliphatic ethers to O-heterocycles over ionic liquid (IL) catalyst under metal- and solvent-free conditions. The IL 1-butylsulfonate-3-methylimidazolium trifluoromethanesulfonate ([SO3 H-BMIm][OTf]) is discovered to show outstanding performance, better than the reported catalysts. An interface effect plays an important role in mediating the reaction rate due to the immiscibility between the products and the IL catalyst, and the products can be spontaneously separated. NMR analysis and DFT calculation suggest that a pair of cation and anion of [SO3 H-BMIm][OTf] could form three strong H-bonds with an ether molecule, which catalyze the ether transformation via a cyclic oxonium intermediate. A series of O-heterocycles including tetrahydrofurans, tetrahydropyrans, morpholines and dioxane can be obtained from their corresponding ethers in excellent yields (e.g., >99 %). This work opens an efficient and metal-free way to produce O-heterocycles from aliphatic ethers.

Eosin†Y-Functionalized Conjugated Organic Polymers for Visible-Light-Driven CO2 Reduction with H2 O to CO with High Efficiency.

Visible-light-driven photoreduction of CO2 to energy-rich chemicals in the presence of H2 O without any sacrifice reagent is of significance, but challenging. Herein, Eosin Y-functionalized porous polymers (PEosinY-N, N=1-3), with high surface areas up to 610 m2 g-1 , are reported. They exhibit high activity for the photocatalytic reduction of CO2 to CO in the presence of gaseous H2 O, without any photosensitizer or sacrifice reagent, and under visible-light irradiation. Especially, PEosinY-1 derived from coupling of Eosin Y with 1,4-diethynylbenzene shows the best performance for the CO2 photoreduction, affording CO as the sole carbonaceous product with a production rate of 33 µmol g-1 h-1 and a selectivity of 92 %. This work provides new insight for designing and fabricating photocatalytically active polymers with high efficiency for solar-energy conversion.

Ultra-Broadband Flexible Photodetector Based on Topological Crystalline Insulator SnTe with High Responsivity.

Topological crystalline insulators (TCIs) are predicted to be a promising candidate material for ultra-broadband photodetectors ranging from ultraviolet (UV) to terahertz (THz) due to its gapless surface state and narrow bulk bandgap. However, the low responsivity of TCIs-based photodetectors limits their further applications. In this regard, a high-performance photodetector based on SnTe, a recently developed TCI, working in a broadband wavelength range from deep UV to mid-IR with high responsivity is reported. By taking advantage of the strong light absorption and small bandgap of SnTe, photodetectors based on the as-grown SnTe crystalline nanoflakes as well as specific short channel length achieve a high responsivity (71.11 A W-1 at 254 nm, 49.03 A W-1 at 635 nm, 10.91 A W-1 at 1550 nm, and 4.17 A W-1 at 4650 nm) and an ultra-broad spectral response (254-4650 nm) simultaneously. Moreover, for the first time, a durable flexible SnTe photodetector fabricated directly on a polyethylene terephthalate film is demonstrated. These results prove the great potential of TCIs as a promising material for integrated and flexible optoelectronic devices.

Ligand-displacement-based two-photon fluorogenic probe for visualizing mercapto biomolecules in live cells, Drosophila brains and zebrafish.

Investigating the change in expression level of mercapto biomolecules (GSH/Cys/Hcy) necessitates a rapid detection method for a series of physiological and pathological processes. Herein, we present a ligand-displacement-based two-photon fluorogenic probe based on an Fe(iii) complex, TPFeS, which is a GSH/Cys/Hcy rapid detection fluorogenic probe for in vitro analysis and live cell/tissue/in vivo imaging. The "in situ" probe is non-fluorescent and was prepared from a 1 : 2 ratio of Fe(iii) and TPS, a novel two-photon (TP) fluorophore with excellent one-photon (OP) and TP properties under physiological conditions, as a fluorescent ligand. This probe shows a rapid and remarkable fluorescence restoration (OFF-ON) property due to the ligand-displacement reaction of mercapto biomolecules in a recyclable manner in vitro. A significant two-photon action cross-section, good selectivity for biothiols, low cytotoxicity, and insensitivity to pH over the biologically relevant pH range allowed the direct visualization of mercapto biomolecules at different levels between normal/drug-treated live cells, as well as in Drosophila brain tissues/zebrafish based on the use of two-photon fluorescence microscopy.

Reductive Coupling of CO2 , Primary Amine, and Aldehyde at Room Temperature: A Versatile Approach to Unsymmetrically N,N-Disubstituted Formamides.

We present a simple, metal-free, and versatile route to synthesize unsymmetrically N,N-disubstituted formamides (NNFAs) from CO2 , primary amine, and aldehyde promoted by an ionic liquid (1-butyl-3-methylimidazolium chloride) at room temperature. This approach features wide scopes of amines and aldehydes, and various unsymmetrical NNFAs could be obtained in good to excellent yields. The ionic liquid can be reused for at least five runs without obvious activity loss.

An Efficient and General Method for Formylation of Aryl Bromides with CO2 and Poly(methylhydrosiloxane).

The formylation of aryl halides with CO2 to generate aryl aldehydes is challenging. Herein, we report a novel synthesis of aryl aldehydes by formylation of aryl bromides with CO2 and a waste silane, poly(methylhydrosiloxane) (PMHS). It has been discovered that a simple combination of 1,3-bis(diphenyphosphino)propane (DPPP)-chelated Pd catalyst, Pd(DPPP)Cl2 , with 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) is able to effectively catalyze the reaction, leading to aryl aldehydes in moderate to excellent yields, and without any by-products in most cases. Moreover, this route could be extended to the formylation of aryl iodides with high efficiency. This approach is simple, less costly, and environmentally friendly, and also widens the applications of CO2 to form value-added chemicals by the construction of new C-C bonds.

Hierarchically Mesoporous o-Hydroxyazobenzene Polymers: Synthesis and Their Applications in CO2 Capture and Conversion.

The synthesis of hierarchically mesoporous polymers with multiple functionalities is challenging. Herein we reported a template-free strategy for synthesis of phenolic azo-polymers with hierarchical porous structures based on diazo-coupling reaction in aqueous solution under mild conditions. The resultant polymers have surface areas up to 593 m(2) g(-1) with the mesopore ratio of >80 %, and a good ability to complex with metal ions, such as Cu(2+) , Zn(2+) ,Ni(2+) , achieving a metal loading up to 26.24 wt %. Moreover, the polymers complexed with Zn showed excellent performance for catalyzing the reaction of CO2 with epoxide, affording a TOF of 2570 h(-1) in the presence of tetrabutyl ammonium bromide (7.2 mol %). The polymer complexed with Cu could catalyze the oxidation of alcohol with high efficiency.

Detection of a superconducting phase in a two-atom layer of hexagonal Ga film grown on semiconducting GaN(0001).

The recent observation of the superconducting state at atomic scale has motivated the pursuit of exotic condensed phases in two-dimensional (2D) systems. Here we report on a superconducting phase in two-monolayer crystalline Ga films epitaxially grown on wide-band-gap semiconductor GaN(0001). This phase exhibits a hexagonal structure and only 0.552 nm in thickness, nevertheless, brings about a superconducting transition temperature Tc as high as 5.4 K, confirmed by in situ scanning tunneling spectroscopy and ex situ electrical magnetotransport and magnetization measurements. The anisotropy of critical magnetic field and Berezinski-Kosterlitz-Thouless-like transition are observed, typical for the 2D superconductivity. Our results demonstrate a novel platform for exploring atomic-scale 2D superconductors, with great potential for understanding the interface superconductivity.

Hydrogen-bonding-mediated synthesis of atomically thin TiO2 films with exposed (001) facets and applications in fast lithium insertion/extraction.

Ultrathin two-dimensional (2D) crystalline materials show high specific surface area (SA) of high energy (HE) facets, imparting a significant improvement in their performances. Herein we report a novel route to synthesize TiO2 nanofilms (NFs) with atomic thickness (<2.0 nm) through a solvothermal reaction mediated by the hydrogen-bonding networks constructed by hydroquinone (HQ). The resultant TiO2 NFs have nearly 100 % exposed (001) facets and give an extremely high SA up to 487 m(2) g(-1) . The synergistic effect of HQ and choline chloride plays a vital role in the formation of TiO2 NFs and in the exposure of HE (001) facets. Because of its ultrathin feature and exposed (001) facet, the N2 -annealled TiO2 NFs showed fast kinetics of lithium insertion/extraction, demonstrating foreseeable applications in the energy storage.

Crossover from 3D to 2D quantum transport in Bi2Se3/In2Se3 superlattices.

The topological insulator/normal insulator (TI/NI) superlattices (SLs) with multiple Dirac channels are predicted to offer great opportunity to design novel materials and investigate new quantum phenomena. Here, we report first transport studies on the SLs composed of TI Bi2Se3 layers sandwiched by NI In2Se3 layers artificially grown by molecular beam epitaxy (MBE). The transport properties of two kinds of SL samples show convincing evidence that the transport dimensionality changes from three-dimensional (3D) to two-dimensional (2D) when decreasing the thickness of building block Bi2Se3 layers, corresponding to the crossover from coherent TI transport to separated TI channels. Our findings provide the possibility to realizing "3D surface states" in TI/NI SLs.