RESUMEN
The widespread existence of liquid crystal monomers (LCMs) in various environmental matrices has been demonstrated, yet studies on the toxicological effects of LCMs are considerably scarce and are urgently needed to be conducted to assess the adverse impacts on ecology and human health. Here, we conducted a bacteriological study on two representative human commensal bacteria, Escherichia coli (E. coli) and Staphylococcus epidermidis (S. epidermidis), to investigate the effect of LCMs at human-relevant dosage and maximum environmental concentration on growth, metabolome, enzymatic activity, and mRNA expression. Microbial growth results exhibited that the highest inhibition ratio of LCMs on S. epidermidis reached 33.6% in our set concentration range, while the corresponding data on E. coli was only 14.3%. Additionally, LCMs showed more dose-dependent toxicity to S. epidermidis rather than E. coli. A novel in vivo solid-phase microextraction (SPME) fiber was applied to capture the in vivo metabolites of microorganisms. In vivo metabolomic analyses revealed that dysregulated fatty acid metabolism-related products of both bacteria accounted for >50% of the total number of differential substances, and the results also showed the species-specific and concentration-dependent metabolic dysregulation in LCM-exposed bacteria. The determination of enzymatic activity and mRNA relative expression levels related to oxidative stress confirmed our speculation that the adverse effects were related to the oxidative metabolism of fatty acids. This study complements the gaps in toxicity data for LCMs against bacteria and provides a new and important insight regarding metabolic dysregulation induced by environmental LCMs in human commensal bacteria.
RESUMEN
The photoluminescent (PL) properties of lanthanide metal-organic frameworks (Ln-MOFs) are intrinsically subtle to water molecules, which remains the major challenge that severely limits their applications as fluorescent probes in aqueous samples. Herein novel composite fluorescent probes were prepared by growing Ln-MOFs (Tb-MOF, Eu-MOF, and Tb/Eu-MOF) on carboxylated porous graphene oxide (PGO-COOH). The 3D thorny composites presented significantly longer fluorescent lifetimes and higher quantum yields than that of the bare Ln-MOFs and exhibited long-term PL stabilities in aqueous samples up to 15 days. The stable and improved PL properties demonstrated that the highly hybrid composite structures protected the MOF components from the adverse effects of water. Furthermore, the unexpected antenna effect of the PGO-COOH substrate on Ln3+ was supposed to be another reason for the improved PL properties. The composites present ultralow detection limits as low as 5.6 nM for 2,4-dinitrotoluene and 2.3 nM for dipicolinic acid as turn-off and ratiometric fluorescent probes, respectively, which was attributed to the incoporation of PGO-COOH that dramatically enahnced inner filter effects and effectively protected the energy transfer process in the MOF components from the interference of the surrounding water. This work presents an effective strategy for creating ultrasensitive and stable fluorescent probes based on Ln-MOFs for applications in aqueous samples.
RESUMEN
Magnetic molecularly imprinted polymers (MMIPs) have superior advantages in sample pretreatment because of their high selectivity for target analytes and the fast and easy isolation from samples. To meet the demand of both good magnetic property and good extraction performance, MMIPs with various structures, from traditional core-shell structures to novel composite structures with a larger specific surface area and more accessible binding sites, are fabricated by different preparation technologies. Moreover, as the molecularly imprinted polymer (MIP) layers determine the affinity, selectivity, and saturated adsorption amount of MMIPs, the development and innovation of the MIP layer are attracting attention and are reviewed here. Many studies that used MMIPs as sorbents in dispersive solid-phase extraction of complex samples, including environmental, food, and biofluid samples, are summarized. Graphical abstract The application of magnetic molecularly imprinted polymers (MIPs) in the sample preparation procedure improves the analytical performances for complex samples. MITs molecular imprinting technologies.
RESUMEN
In recent years, bile acids (BAs), the important component of bile, were found closely related to the occurrence and development of diseases, therefore, determination of BAs in bile samples is of great significance. However, biological matrix complexity and low concentrations of BAs were still challenging for BA detection in small amount of bile samples. In this work, a core-shell NH2-MIL101@mSiO2 was designed to improve the capture ability of BAs in biological samples, as well as possess good biocompatibility. Subsequently, solid-phase microextraction (SPME) probe of the NH2-MIL101@mSiO2 was coupled with HPLC-MS/MS to establish the analysis method for detecting eight BAs in bile samples. The established method received extraction efficiencies of (30-2143)-fold higher than those of the commercial probes and low limit of detection (LOD ≤ 0.21 ng mL-1). The miniaturization of SPME sampling devices, as well as the low LOD of this work, endowed this method advantage of low consumption of bile samples (30 µL). Based on the proposed method, eight BAs in bile samples of pancreatic cancer patients and cholelithiasis patients were detected successfully. A distinct difference was found in the concentrations of four targeted BAs in bile samples from pancreatic cancer patients and cholelithiasis patients. This work provided a method for quantification of eight BAs in small volume human bile samples, and it could open up a perspective regarding the relationship between BA metabolism and the occurrence of diseases.
Asunto(s)
Colelitiasis , Estructuras Metalorgánicas , Neoplasias Pancreáticas , Humanos , Ácidos y Sales Biliares , Espectrometría de Masas en Tándem/métodos , Microextracción en Fase Sólida , BilisRESUMEN
Perfluorinated alkyl substances (PFASs) were ubiquitously in the surface and groundwater. It is crucial and urgent to develop a rapid and ultrasensitive analysis method for the quantification of trace-level PFASs. Herein, a highly hydrophobic sorbent by capping phenylsilane groups on the surfaces of NH2-UiO-66(Zr) nanocrystals was used for efficient solid-phase microextraction (SPME) of PFASs in water samples. It was found that the superficially capped nanocrystals (NH2-UiO-66(Zr)-hp) exhibited both faster extraction kinetics and higher enrichment capacity than the non-capped nanocrystals. The extraction of eleven kinds of PFASs by NH2-UiO-66(Zr)-hp fiber reached equilibrium in 20 min. The enrichment factors of the NH2-UiO-66(Zr)-hp fiber ranged from 6.5 to 48, with a preference for long-chain PFASs over short-chain PFASs. It was proposed that superficial capping eliminated competitive moisture adsorption on the surfaces of the non-capped nanocrystals, thus facilitating the adsorption of PFASs through hydrophobic interaction. By using this new sorbent, the limits of detection of the SPME method as low as 0.035 to 0.616 ng·L-1 were achieved for the target PFASs. The recoveries of PFASs in the environmental water samples were 80.9%-120%. This study presents a new strategy for developing an efficient sorbent for PFASs by surface hydrophobic modification.
Asunto(s)
Estructuras Metalorgánicas , Ácidos Ftálicos , Contaminantes Químicos del Agua , Estructuras Metalorgánicas/química , Microextracción en Fase Sólida/métodos , Contaminantes Químicos del Agua/análisisRESUMEN
The design and synthesis of novel high-performance solid phase microextraction (SPME) coatings towards organic pollutants with diverse chemical properties is still a challenge in sample preparation. Herein, a stable chitosan cross-linked graphene oxide (GOCS) aerogel was reported as a novel coating for solid phase microextraction. The interpenetrated meso- and macropores ensured the large surface area and high accessibility of the functional groups across the aerogel, resulting in high extraction performance towards target hydrophobic pollutants. The extraction capacities of the GOCS-coated SPME fiber towards analytes (e.g. polycyclic aromatic hydrocarbons, organophosphorus pesticides, organochlorine pesticides, pyrethroids, and polychlorinated biphenyls) were about 0.5-13 times as high as those obtained by the commercial fibers (30 µm polydimethylsiloxane (PDMS), 65 µm polydimethylsiloxane/divinylbenzene (PDMS/DVB)), which was attributed to the hydrophobic, π-π, halogen bond and hydrogen bond interactions between the coating and the analytes. Under the optimized extraction conditions, superior analytical performances for PAHs were achieved with a wide linearity (0.5-1000 ng L-1), high enhancement factors (311-3740), and the low limits of detection (0.03-1.28 ng L-1). Finally, the GOCS-coated SPME fiber was successfully applied to the determination of PAHs in real water samples with good recoveries (91.6%-110%).
Asunto(s)
Quitosano , Contaminantes Ambientales , Plaguicidas , Grafito , Compuestos Organofosforados , Microextracción en Fase SólidaRESUMEN
The extraction performance of solid-phase microextraction (SPME) fiber is significantly influenced by coating materials and fabricating process. It is urgently needed for fabricating robust SPME fiber with facile preparation methods. Herein, a novel polyimide (PI) @ covalent organic framework (COF) synthesized by 1,3,5-Tris (4-aminophenyl) benzene (TPB) and 2,5-dimethoxyterephthalaldehyde (DMTP) fiber, named PI@TPB-DMTP fiber, was successfully fabricated with facile method at room temperature. Firstly, a COF crystals TPB-DMTP was in situ grown on stainless steel fiber, where the COF crystals was synthesized by the Schiff-base reaction between TPB and DMTP. Subsequently, the COF coating was covered with an ultrathin layer of PI through a simple dip-coating method to improve the fiber stability. By coupled PI@TPB-DMTP SPME fiber with gas chromatography-negative chemical ion-mass spectrometry (GC-NCI-MS), a sensitive analytical method was established for the determination of ultratrace polybrominated diphenyl ethers (PBDEs) in water sample. To achieve the best efficiency and sensitivity for the analysis of PBDEs, six potential influencing factors in extraction step and desorption step were optimized. Under optimized conditions, the established method showed high enhancement factors of 1470-3555, wide linear range of 0.05-100 ng L-1, low detection limits of 0.0083-0.0190 ng L-1, good repeatability for intra-day in the range of 3.71%-7.62% and inter-day in the range of 5.12%-8.81%, good reproducibility in the range of 6.83%-9.21%. The satisfactory recovery was ranged from 79.2% to 117.3% in determining real water samples. The excellent experimental performance was mainly attributed to the large specific surface area of TPB-DMTP, as well as the high permeability of porous PI film. The results demonstrated that the COF-based fiber showed great potential for analysis of PBDEs in complex environmental samples.
Asunto(s)
Estructuras Metalorgánicas , Contaminantes Químicos del Agua , Éteres Difenilos Halogenados/análisis , Reproducibilidad de los Resultados , Microextracción en Fase Sólida , Temperatura , Contaminantes Químicos del Agua/análisisRESUMEN
The secretion disorder of sex hormones is the source that leads to the occurrence of many diseases such as polycystic ovarian syndrome (PCOS), hyperandrogenism and so on. There exist physiological changes in human body when slight fluctuations in concentrations of sex hormones happen. Therefore, it's of great significance for accurate detection of sex hormones in human body. In this work, TpPa-1 COF solid-phase microextraction (SPME) fiber was prepared using high-efficient in-situ synthesis strategy and coupled with HPLC-MS/MS to detect three sex hormones, including Progesterone (P), testosterone (T) and dehydroepiandrosterone (DHEA) in human serum. The thickness of the coating reached 7 µm within 2 h. Under the optimal conditions, the established method presented low limit of detections (LODs, ≤ 0.75 ng/mL), wide linear ranges (0.100-100 ng mL-1) and good reproducibility, and three sex hormones (T, P, DHEA) were successfully detected and quantified in human serum. In conclusion, the established SPME method presented high-efficient fiber preparation and good analytical performances of sex hormone detection, therefore was in great potential for application in clinical.
Asunto(s)
Microextracción en Fase Sólida , Espectrometría de Masas en Tándem , Cromatografía Líquida de Alta Presión , Hormonas Esteroides Gonadales , Humanos , Reproducibilidad de los ResultadosRESUMEN
Excess bilirubin in the body will lead to serious health problems; however, its efficient removal remains a challenge in the clinical field because the available sorbent materials still suffer from serious performance issues, performance declining in a high-content albumin environment. Herein, we prepared a novel polydopamine (PDA) decorated ordered mesoporous carbon (OMC) material for the efficient removal of bilirubin in albumin-rich conditions. OMC was used as the supporting material due to its high specific surface area and its good affinity to hydrophobic analytes. PDA was then decorated on the OMC material through a facile self-assembly process to form a surface-imprinted layer. The obtained PDA-coated OMC material (OMC@PDA) exhibited excellent adsorption performance towards bilirubin in albumin-free conditions, in which its theoretical maximum adsorption amount was calculated to be 513.54 mg g-1. The imprinted PDA layer, for which the association constant towards bilirubin reached 4.51 × 104 M-1, endowed OMC@PDA with a competitive affinity compared to albumin. Therefore the materials showed good adsorption capacity and efficiency even in an albumin-rich environment (the adsorption equilibrated at 122.7 mg g-1 in 30 min). In addition, the good biocompatibility of OMC@PDA was demonstrated by hemolysis assay and protein fouling evaluation, which indicated the feasibility of applying this material in clinical situations.
Asunto(s)
Bilirrubina/aislamiento & purificación , Indoles/farmacología , Polímeros/farmacología , Adsorción , Bilirrubina/sangre , Carbono/química , Humanos , PorosidadRESUMEN
Herein, an intriguing strategy is presented for preparing monolithic metal-organic framework (MOF) coatings through compactly filling up the interparticle spaces in the stacked architectures of nanocrystals. The monolithic coatings exhibited remarkably enhanced performance (double to triple compared to the MOF powders) for analyte extraction, due to the increased volumetric BET areas.
RESUMEN
Although bile acids (BAs) have been suggested as important biomarkers for endocrine diseases, the identification and quantification of different BAs are still challenges due to their enormous species and wide range concentrations. Herein, a copolymer probe based on ß-cyclodextrin (ß-CD) is fabricated through a simple in-mold photopolymerization for the selective extraction of BAs. Through the unique stereochemical affinity between BAs and the cavity of ß-CD, the custom probe shows superior enriching capacities to series BAs. Moreover, the outstanding extraction ability is proved to be consistent in various interfering conditions, including pH changing and the addition of complex matrix. Further comparison shows that the stereostructure of the nucleus of BAs plays a vital role during the formation of the ß-CD/BA complex, indicating the potential for efficient extraction of other BAs, including their structural analogues or some unknown ones. The developed probe is used for solid phase microextraction, and the limits of detection are lower than 0.075 ng mL-1 by coupling to high performance liquid chromatography-tandem mass analysis. The results in this study highlight the potential for effective improvement of immediate detection and profiling of BAs in real samples, which will make a tremendous impact in the analytical field or clinical diagnosis.