Synergistic Control of Trimethoprim and the Antimicrobial Resistome in Electrogenic Microbial Communities.

Synergistic control of the risks posed by emerging antimicrobials and antibiotic resistance genes (ARGs) is crucial for ensuring ecological safety. Although electrogenic respiration can enhance the biodegradation of several antimicrobials and reduce ARGs accumulation, the association mechanisms of antimicrobial biodegradation (trimethoprim, TMP) with the fate of the antimicrobial resistome remain unclear. Here, the biotransformation pathway of TMP, microbial associations, and functional gene profiles (e.g., degradation, antimicrobial resistance, and electron transfer) were analyzed. The results showed that the microbial electrogenic respiration significantly enhanced the biodegradation of TMP, especially with a cosubstrate sodium acetate supply. Electroactive bacteria enriched in the electrode biofilm positively correlated with potential TMP degraders dominated in the planktonic communities. These cross-niche microbial associations may contribute to the accelerated catabolism of TMP and extracellular electron transfer. Importantly, the evolution and dissemination of overall ARGs and mobile genetic elements (MGEs) were significantly weakened due to the enhanced cometabolic biodegradation of TMP. This study provides a promising strategy for the synergistic control of the water ecological risks of antimicrobials and their resistome, while also highlighting new insights into the association of antimicrobial biodegradation with the evolution of the resistome in an electrically integrated biological process.

Tannic Acid Modulation of Substrate Utilization, Microbial Community, and Metabolic Traits in Sludge Anaerobic Fermentation for Volatile Fatty Acid Promotion.

Anaerobic fermentation is a crucial route to realize effective waste activated sludge (WAS) resource recovery and utilization, while the overall efficiency is commonly restrained by undesirable disruptors (i.e., chemical dewatering agents). This work unveiled the unexpectedly positive effects of biodewatering tannic acid (TA) on the volatile fatty acids (VFAs) biosynthesis during WAS anaerobic fermentation. The total VFAs yield was remarkably increased by 15.6 folds with enriched acetate and butyrate in TA-occurred systems. TA was capable to disintegrate extracellular polymeric substances to promote the overall organics release. However, TA further modulated the soluble proteins structure by hydrogen bonding and hydrophobic interactions, resulting in the decrease of proteins bioavailability and consequential alteration of metabolic substrate feature. These changes reshaped the microbial community and stimulated adaptive regulatory systems in hydrolytic-acidogenic bacteria. The keystone species for carbohydrate metabolism (i.e., Solobacterium and Erysipelotrichaceae) were preferentially enriched. Also, the typical quorum sensing (i.e., enhancing substrate transport) and two-component systems (i.e., sustaining high metabolic activity) were activated to promote the microbial networks connectivity and ecological cooperative behaviors in response to TA stress. Additionally, the metabolic functions responsible for carbohydrate hydrolysis, transmembrane transport, and intracellular metabolism as well as VFA biosynthesis showed increased relative abundance, which maintained high microbial activities for VFAs biosynthesis. This study underscored the advantages of biodewatering TA for WAS treatment in the context of resource recovery and deciphered the interactive mechanisms.

NiRu-Mo2Ti2C3O2 as an efficient catalyst for alkaline hydrogen evolution reactions: the role of bimetallic site interactions in promoting Volmer-step kinetics.

The Volmer step in alkaline hydrogen evolution reactions (HERs), which supplies H* to the following steps by cleaving H-O-H bonds, is considered the rate-determining step of the overall reaction. The Volmer step involves water dissociation and adsorbed hydroxyl (*OH) desorption; Ru-based catalysts display a compelling water dissociation process in an alkaline HER. Unfortunately, the strong affinity of Ru for *OH blocks the active sites, resulting in unsatisfactory performance during HER processes. Hence, this study investigates a series of key descriptors (ΔG*H2O, ΔG*H-OH, ΔG*H, and ΔG*OH) of TM (Fe, Co, Ni, Ru, Rh, Pd, Os, Ir, or Pt)-Ru/Mo2Ti2C3O2 to systematically explore the effects of bimetallic site interactions on the kinetics of the Volmer step. The results indicate that bimetallic catalysts effectively reduced the strong adsorption of *OH on Ru sites; especially, the NiRu diatomic state shows the highest electron-donating ability, which promoted the smooth migration of *OH from Ru sites to Ni sites. Therefore, Ru, Ni and MXenes are suitable to serve as water adsorption and dissociation sites, *OH desorption sites, and H2 release sites, respectively. Ultimately, NiRu/Mo2Ti2C3O2 promotes Volmer kinetics and has the potential to improve alkaline HERs. This work provides theoretical support for the construction of synergistic MXene-based diatomic catalysts and their wide application in the field of alkaline HERs.

Distinct roles of biochar and pyrite substrates in enhancing nutrient and heavy metals removal in intermittent-aerated constructed wetlands: Performances and mechanism.

Constructed wetlands have been widely employed as a cost-effective and environmentally friendly alternative for treating primary and secondary sewage effluents. In this study, biochar and pyrite were utilized as electron donor substrates in intermittent-aerated vertical flow constructed wetlands to strengthen the nutrient and heavy metals removal simultaneously, and the response of nutrient reduction and microbial community to heavy metals stress was also explored. The results indicated that biochar addition exhibited a better nitrogen removal, while pyrite addition greatly promoted the phosphorus removal. Moreover, the high removal efficiencies of Cu2+, Pb2+ and Cd2+ (above 90%) except for Zn2+ were obtained in each system. However, the exposure of heavy metals decreased phosphorus removal while had little effect on nitrogen removal. The influent load and intermittent aeration implementation led to a significant shift in microbial community structures, but microbial biodiversity and abundance decreased under the exposure of heavy metals. Particularly, Thiobacillus and Ferritrophicum, associated with sulfur autotrophic denitrification and iron autotrophic denitrification, were more abundant in pyrite-based wetland systems.

Advancing the treatment of low carbon-to-nitrogen ratio municipal wastewater using a novel microaerobic sludge bed approach: Insights into enhanced performance and functional microbial community.

Microaerobic sludge bed systems could align with low-energy, reasonable carbon-nitrogen (C/N) ratio, and synchronous removal objectives during wastewater treatment. However, its ability to treat municipal wastewater (MW) with varying low C/N ratio, low NH4+ concentration, along with managing sludge bulking and loss are still unclear. Against this backdrop, this study investigated the performance of an Upflow Microaerobic Sludge Bed Reactor (UMSR) treating MW characterized by varying low C/N ratios and low NH4+ concentrations. The study also thoroughly examined associated sludge bulking and loss, pollutant removal efficiencies, sludge settleability, microbial community structures, functional gene variations, and metabolic pathways. Findings revealed that the effluent NH4+-N concentration gradually decreased to 0 mg/L with a decrease in the C/N ratio, whereas the effluent COD was unaffected by the influent, maintaining a concentration below 50 mg/L. Notably, TN removal efficiency reached 90% when C/N ratio was 3. The decrease in the C/N ratio (C/N ratio was 1) increased microbial community diversity, with abundances of AOB, AnAOB, aerobic denitrifying bacteria, and anaerobic digestion bacteria reaching 8.34%, 0.96%, 5.07%, and 9.01%, respectively. Microorganisms' metabolic pathways significantly shifted, showing increased carbohydrate and cofactor/vitamin metabolism and decreased amino acid metabolism and xenobiotic biodegradation. This study not only provides a solution for the effluent of different pre-capture carbon processes but also demonstrates the UMSR's capability in managing low C/N ratio municipal wastewater and emphasizes the critical role of microbial community adjustments and functional gene variations in enhancing nitrogen removal efficiency.

Deep insights into the roles and microbial ecological mechanisms behind waste activated sludge digestion triggered by persulfate oxidation activated through multiple modes.

Persulfate oxidation (PS) is widely employed as a promising alternative for waste activated sludge pretreatment due to the capability of generating free radicals. The product differences and microbiological mechanisms by which PS activation triggers WAS digestion through multiple modes need to be further investigated. This study comprehensively investigated the effects of persulfate oxidation activated through multiple modes, i.e., ferrous, zero-valent iron (ZVI), ultraviolet (UV) and heat, on the performance of sludge digestion. Results showed that PS_ZVI significantly accelerated the methane production rate to 12.02 mL/g VSS. By contrast, PS_Heat promoted the sludge acidification and gained the maximum short-chain fatty acids (SCFAs) yield (277.11 ± 7.81 mg COD/g VSS), which was 3.41-fold compared to that in PS_ZVI. Moreover, ferrous and ZVI activated PS achieved the oriented conversion of acetate, the proportions of which took 73% and 78%, respectively. MiSeq sequencing results revealed that PS_Heat and PS_UV evidently enriched anaerobic fermentation bacteria (AFB) (i.e., Macellibacteroides and Clostridium XlVa). However, PS_Ferrous and PS_ZVI facilitated the enrichment of Woesearchaeota and methanogens. Furthermore, molecular ecological network and mantel test revealed the intrinsic interactions among the multiple functional microbes and environmental variables. The homo-acetogens and sulfate-reducing bacterial had potential cooperative and symbiotic relationships with AFB, while the nitrate-reducing bacteria displayed distinguishing ecological niches. Suitable activation modes for PS pretreatments resulted in an upregulation of genes expression responsible for digestion. This study established a scientific foundation for the application of sulfate radical-based oxidation on energy or high value-added chemicals recovery from waste residues.

Biochar derived from alkali-treated sludge residue regulates anaerobic digestion: Enhancement performance and potential mechanisms.

Biochar produced from bio-wastes has been widely used to promote the performance of anaerobic digestion. Waste activated sludge (WAS) is considered as a kind of popular precursor for biochar preparation, but the abundant resources in WAS were neglected previously. In this study, the roles of biochar prepared from raw, pretreated, and fermented sludge on anaerobic digestion were investigated. That is, parts of carbon sources and nutrients like polysaccharides, proteins, and phosphorus were firstly recovered after sludge pretreatment or fermentation, and then the sludge residuals were used as raw material to prepare biochar. The methane yield improved by 22.1% with adding the biochar (AK-BC) prepared by sludge residual obtained from alkaline pretreatment. Mechanism study suggested that the characteristics of AK-BC like specific surface area and defect levels were updated. Then, the conversion performance of intermediate metabolites and electro-activities of extracellular polymeric substances were up-regulated. As a result, the activity of electron transfer was increased with the presence of AK-BC, with increase ratio of 21.4%. In addition, the electroactive microorganisms like Anaerolineaceae and Methanosaeta were enriched with the presence of AK-BC, and the potential direct interspecies electron transfer was possibly established. Moreover, both aceticlastic and CO2-reducing methanogenesis pathways were improved by up-regulating related enzymes. Therefore, the proposed strategy can not only obtain preferred biochar but also recover abundant resources like carbon source, nutrients, and bioenergy.

Efficient phosphate and hydrogen recovery from sludge fermentation liquid by sacrificial iron anode in electro-fermentation system.

Electro-fermentation (EF) has been extensively studied for recovering hydrogen and phosphorus from waste activated sludge (WAS), while was limited for the further application due to the low hydrogen yield and phosphorus recovery efficiency. This study proposed an efficient strategy for hydrogen and vivianite recovery from the simulated sludge fermentation liquid by sacrificial iron anode in EF. The optimum hydrogen productivity and the utilization efficiency of short chain fatty acids (SCFAs) reached 45.2 mmol/g COD and 77.6% at 5 d in pH 8. Phosphate removal efficiency achieved at 90.8% at 2 d and the high crystallinity and weight percentage of vivianite (84.8%) was obtained. The functional microbes, i.e., anaerobic fermentative bacteria, electrochemical active bacteria, homo-acetogens and iron-reducing bacteria were highly enriched and the inherent interaction between the microbial consortia and environmental variables was thoroughly explored. This work may provide a theoretical basis for energy/resource recovery from WAS in the further implementation.

Layered double hydroxides for phosphorus recovery from lipid-rich waste anaerobic fermentation liquor.

This study aimed to extract orthophosphate (ortho-P) from lipid-rich waste AF liquor (AFL) by Mg/Al layered double hydroxides (Mg/Al LDHs) adsorption, evaluate the influence of carbonate and investigate adsorption mechanisms. The carbonate influence experiment using synthetic P-rich wastewater indicated that low carbonate level was favorable for P extraction by LDHs. And then, real AFL rich in volatile fatty acids (VFAs), carbonate and ortho-P was applied as adsorbate to explore the Mg/Al LDHs adsorption performance. Experimental results indicated that 4 g/L Mg/Al LDHs could extract 88.3% of ortho-P from the AFL with low carbonate level (4829.83 mg CaCO3/L), and the adsorption quantity was 62.99 mg P/g LDHs, however, negligible VFAs were extracted. Kinetics and mechanisms analysis indicated that adsorption of P onto Mg/Al LDHs was a rapid physiochemical process, including ion exchange and surface adsorption. Finally, the nutrients release test confirmed the slow-release property of intercalated P.

Tailored short-chain fatty acids conversion from waste activated sludge fermentation via persulfate oxidation and C3-C5 io-SRB metabolizers.

Boosting acetate production from waste activated sludge (WAS) fermentation is often hindered by the inefficient solubilization in the hydrolysis step and the high hydrogen pressure ( [Formula: see text] ) during the acidogenesis of C3-C5 short-chain fatty acid (SCFAs), i.e., propionate (HPr), butyrate (HBu) and valerate (HVa). Therefore, this study employed persulfate (PS) oxidation and C3-C5 incomplete-oxidative sulfate reducing bacteria (io-SRB) metabolizers to tailor SCFAs conversion from WAS fermentation. The decomposition efficiency, performance of SCFAs production was investigated. Results showed that the PS significantly promoted WAS decomposition, with a dissolution rate of 39.4%, which is 26.0% higher than the un-treated test. Furthermore, SCFAs yields were increased to 462.7 ± 42 mg COD/g VSS in PS-HBu-SRB, which was 7.4 and 2.2 times higher than that of un-treated and sole PS tests, respectively. In particular, the sum of acetate and HPr reached the peak value of 85%, indicating that HBu-SRB mediation promoted the biotransformation of HBu and macromolecular organics by reducing the [Formula: see text] restriction. Meanwhile, sulfate radical (SO4∙-)-based oxidation (SR-AOPs) was effective in the decomposition of WAS, the oxidative product, i.e., sulfate served the necessary electron acceptor for the metabolism of io-SRB. Further analysis of Mantel test revealed the cluster of the functional genus and their interaction with environmental variables. Additionally, molecular ecological network analysis explored the potential synergistic and competitive relationships between critical genera. Additionally, the potential synergistic and competitive relationships between critical genera was explored by molecular ecological network analysis. This study provides new insights into the integration of SR-AOPs with microbial mediation in accelerating SCFAs production from WAS fermentation.

Contribution identification of hydrolyzed products of potassium ferrate on promoting short-chain fatty acids production from waste activated sludge.

Potassium ferrate (K2FeO4) has been extensively employed to promote short-chain fatty acids (SCFAs) production from anaerobic fermentation of waste activated sludge (WAS) because of its potent oxidizing property and formation of alkaline hydrolyzed products (potassium hydroxide, KOH and ferric hydroxide, Fe(OH)3). However, whether K2FeO4 actually works as dual functions of both an oxidizing agent and an alkalinity enhancer during the anaerobic fermentation process remains uncertain. This study aims to identify the contributions of hydrolyzed products of K2FeO4 on SCFAs production. The results showed that K2FeO4 did not execute dual functions of oxidization and alkalinity in promoting SCFAs production. The accumulation of SCFAs using K2FeO4 treatment (183 mg COD/g volatile suspended solids, VSS) was less than that using either KOH (192 mg COD/g VSS) or KOH & Fe(OH)3 (210 mg COD/g VSS). The mechanism analysis indicated that the synergistic effects caused by oxidization and alkalinity properties of K2FeO4 did not happen on solubilization, hydrolysis, and acidogenesis stages, and the inhibition effect caused by K2FeO4 on methanogenesis stage at the initial phase was more severe than that of its hydrolyzed products. It was also noted that the inhibition effects of K2FeO4 and its hydrolyzed products on the methanogenesis stage could be relieved during a longer sludge retention time, and the final methane yields using KOH or KOH & Fe(OH)3 treatment were higher than that using K2FeO4, further confirming that dual functions of K2FeO4 were not obtained. Therefore, K2FeO4 may not be an alternative strategy for enhancing the production of SCFAs from WAS compared to its alkaline hydrolyzed products. Regarding the strong oxidization property of K2FeO4, more attention could be turned to the fates of refractory organics in the anaerobic fermentation of WAS.

Natural zeolite enhances anaerobic digestion of waste activated sludge: Insights into the performance and the role of biofilm.

Anaerobic digestion is widely employed for the treatment of waste activated sludge (WAS) due to its advantages like simultaneous energy recovery and sludge stabilization, promoting carbon-neutral operation of wastewater treatment plants. Natural zeolite, a low-cost and eco-friendly additive, has the potential to improve methane production from anaerobic digestion. This study investigated the effects of natural zeolite on anaerobic digestion when the substrate was WAS. It was found that methane production potential in response to natural zeolite was dosage-dependent. The optimal dosage was 0.1 g zeolite/g volatile suspended solids (VSS), with a methane yield of 181.89 ± 6.75 mL/g VSS, which increased by 20.1% compared to that of the control. Although the methane yields with other dosages of natural zeolite were higher than that of control, they were lesser than that with 0.1 g zeolite/g VSS. Natural zeolite affected transfer and conversion of proteins much more than polysaccharides in liquid phase and extracellular polymeric substances. In anaerobic digestion, natural zeolite had with little effects on WAS solubilization, while it improved hydrolysis, acidification, and methanogenesis. The dosages of natural zeolite did have significant effects on bacterial communities in biofilm rather than suspension, while the archaeal communities in biofilm and suspension were all greatly related to natural zeolite dosages. The developed biofilms promoted richness and functionality of microbial communities. The syntrophic metabolism relationships between methanogens and bacteria were improved, which was proved by selective enrichment of Methanosarcina, Syntrophomonas, and Petrimonas. The findings of this work provided some new solutions for promoting methane production from WAS, and the roles of natural zeolite in anaerobic digestion.

Distribution characteristics, risk assessment, and relevance with surrounding soil of heavy metals in coking solid wastes from coking plants in Shanxi, China.

Heavy metal concentrations represent important pollution evaluation indices, and it is necessary to assess the potential environmental and health risks from heavy metals associated with coking wastes from coking plants. In this study, coking sludge (CS), tar residue (TR), coke powder (CP), and sulfur paste (SP) from three coking plants (Plant A, Plant B, and Plant C) in central, western, and southern Shanxi Province and from soils surrounding Plant A were selected as the research objects, and the distributions of Cu, Ni, Pb, Zn, Mn, Cd, and Cr were determined. The results showed that Cd in the four solid wastes far exceeded the soil background value by a factor of 16~195, and the contents of Pb in TR (three plants) and CS (Plant C) exceeded the soil background values 19.70-, 23.57-, 14.46-, and 12.56-fold, respectively. Similarly, the concentrations of Cu, Ni, Pb, Zn, and Cd in soils were higher than the background values by factors of 31.18, 8.35, 34.79, 29.48, and 3.43, respectively. In addition, the Cu, Ni, Pb, and Cr in the four solid wastes and soils mainly existed in the residual state. As depth increased, the overall Ni, Pb, Mn, and Cd concentrations in soils increased. The high ecological risks associated with the four solid wastes were mainly due to the enrichment of Cd. Workers in coking plants face certain Cr health risks. This study provides theoretical support for the coking industry with respect to the treatment, disposal, and management of solid wastes.

Ammonia-nitrogen removal from water with gC3N4-rGO-TiO2 Z-scheme system via photocatalytic nitrification-denitrification process.

Photocatalytic removal of NH3-N is expected to be an alternative to the biological method that accompanied with high energy consumption and secondary pollution. However, NH3-N is always oxidized into nitrate and nitrite during the photocatalytic processes, which also need to be removed from the water. Herein, the g-C3N4/rGO/TiO2 Z-scheme photocatalytic system was prepared and used for the NH3-N removal. The results showed the rate constant of NH3-N conversion on it was 0.705 h-1, 1.7 times as high as that on g-C3N4/TiO2, and most of the NH3-N were converted into gaseous products. And the experiment result indicated NH3-N and NO3- in water could enhance the removal of each other. According to the results, the main reaction mechanism is speculated as: ·OH radicals and ·O2- radicals were generated on TiO2 and oxidized the NH3-N into NO3-, and the latter was reduced into non-toxic N2 on the conduction band of g-C3N4. Finally, NH3-N removal performance for actual coking wastewater was investigated, and the stability of the photocatalyst was tested. This work provides some theoretical basis for the two-step degradation of pollutants by Z-scheme photocatalytic system.

Mechanism, electrochemistry and biotoxicity analysis of the biodegradation of sulfadiazine on Nickel(â ¡)/Manganese(â ¡)-modified graphite felt bioanode.

Sulfadiazine (SDZ) is one of the most representative sulfonamides antibiotics, and its biodegradation has become a research hotspot in recent years. The present study innovatively adopted a microbial fuel cells with a Nickel (Ⅱ) and Manganese (Ⅱ)-decorated graphite felt bioanode (Ni(Ⅱ)/Mn (Ⅱ)-MFCs) to remove SDZ. The results demonstrated that the Ni(Ⅱ)/Mn (Ⅱ)-MFCs exhibited improved electrochemical performance, with a higher power density (742.98 ± 58.33 mW/m2) compared to the control MFCs (678.34 ± 52.87 mW/m2), an overall lower anode potential, and a larger double layer area (cyclic voltammetry). After 5 months of operation, approximately 97.95% of 30 mg/L SDZ was degraded within 120 h, which was 11.46% higher than that of the control MFCs. Moreover, SDZ and its byproducts could be better mineralized in the Ni(Ⅱ)/Mn (Ⅱ)-MFCs than the control, and the biotoxicity of SDZ towards Escherichia coli and Vibro qinghaiensis sp. Q67 could be greatly decreased after treatment with the modified MFCs. Based on the metabolites, we hypothesized that the chemical reactions hydroxylation, ammoxidation, SO2-extrusion, sulfur-reduction, etc. played a significant role in SDZ biodegradation. A microbial community analysis revealed that Dechloromonas (2.37%), Denitratisoma (5.32%) and Lentimicrobium (26.35%) were the dominant functional microbes in the Ni(Ⅱ)/Mn (Ⅱ)-MFCs. This study may provide insights and a theoretical basis for the biodegradation of sulfonamides and thus may facilitate further investigations and relevant findings.

Unveiling the bioelectrocatalyzing behaviors and microbial ecological mechanisms behind caproate production without exogenous electron donor.

Bioelectrochemical systems were proposed as a promising approach for the efficient valorization of biomass into 6-8 carbon atom medium-chain fatty acids (MCFAs), the precursors for high value-added chemicals or renewable energy, via acetyl-CoA-mediated chain elongation (CE). To achieve CE processes, exogenous electron donors (EDs), e.g., ethanol or lactic acid, were normally prerequisites. This research built a microbial electrolysis cell (MEC) for MCFAs biosynthesis from acetate without exogenous EDs addition. A wide range of applied voltages (0.6-1.2 V) was first employed to investigate the bioelectrocatalyzing response. The results show that caproate and butyrate were the main products formed from acetate under different applied voltages. Maximum caproate concentration (501 ± 12 mg COD/L) was reached at 0.8 V on day 3. Under this applied voltage, hydrogen partial pressure stabilized at about 0.1 bar, beneficial for MCFA production. Electron and carbon balances revealed that the electron-accepting capacity achieved 32% at 0.8 V, showing the highest interspecies electron transfer efficiency. Most of the carbon was recovered in the form of caproate (carbon loss was 9%). MiSeq sequencing revealed Rhodobacter and Clostridium_sensu_stricto playing the crucial role in the biosynthesis of caproate, while Acetobacterium, Acetoanaerobium, and Acetobacter represented the main ED contributors. Four available flora, i.e., homo-acetogen, anaerobic fermentation bacteria, electrode active bacteria, and nitrate-reducing bacteria, interacted and promoted caproate synthesis by molecular ecological network analysis.

Elucidating the microbial ecological mechanisms on the electro-fermentation of caproate production from acetate via ethanol-driven chain elongation.

Electro-fermentation (EF) is an attractive way to implement the chain elongation (CE) process, by controlling the fermentation environment and reducing the dosage of external electron donors (EDs). However, besides the coexistence performance of external EDs and electrode, applications of EF technology on the fermentation broth containing both EDs and electron acceptors during CE process, are all still limited. The current study investigated the contribution of EF to caproate production, under different acetate: ethanol ratios (RA/E). The effect of multiple EDs, both from ethanol and the bio-cathode, on caproate production, was also assessed. A proof-of-concept, based on experimental data, was presented for the EF-mediated ethanol-driven CE process. Experimental results showed that ethanol, together with the additional electron donors from the bio-cathode, was beneficial for the stable caproate production. The caproate concentration increased with the decrease of RA/E, while the bio-cathode further contributed to 10.7%-26.1 % increase of caproate concentration. Meanwhile, the hydrogen partial pressure tended to 0.10 ± 0.01 bar in all controlled EF reactors, thus favoring caproate production. This was attributed to the increased availability EDs, i.e., hydrogen and ethanol, generated by the electrode and electrochemically active bacteria (EAB), which might create multiple additional pathways to achieve caproate production. Molecular ecological networks analysis of the key microbiomes further revealed underlying cooperative relationships, beneficial to the chain elongation process. The genus Clostridium_sensu_stricto, as the dominant microbial community, was positively related to acetogens, EAB and fermenters.

Study on the preparation and feasibility of a novel adding-type biological slow-release carbon source.

The development of slow-release carbon sources is an effective biological treatment to remove nutrients from wastewater with low carbon-to-nitrogen ratio (C/N). Most filling-type slow-release carbon could not fulfil the needs of current wastewater treatment plants (WWTPs) process. And most adding-type slow-release carbon sources were prepared using some expensive chemical materials. In this study, combining the advantages of the aforementioned types, a novel adding-type wastepaper-flora (AT-WF) slow-release carbon source was proposed, aiming to realise wastepaper recycling in WWTPs. The screening and identification of the mixed flora, AT-WF carbon source release behaviour, and denitrification performance were investigated. The results showed that through the proposed screening method, a considerable proportion of cellulose-degradation-related genera was enriched, and the cellulose degradation ability and ratio of readily available carbon sources of flora T4, S4 and S5 were effectively strengthened. AT-WF had significant carbon release ability and stability, with an average total organic carbon (TOC) release of 8.82 ± 2.36 mg/g. Kinetic analysis showed that the entire carbon release process was more consistent with the first-order equation. Piecewise fitting with the Ritger-Peppas equation exhibited that the rapid-release (RR) stage was skeleton dissolution and the slow-release (SR) stage was Fick diffusion. Denitrification efficiency can achieve a high average removal efficiency of 94.17%, which could theoretically contribute 11.2% more to the total inorganic nitrogen (TIN) removal. Thus, this study indicated that AT-WF could be utilised as an alternative carbon source in WWTPs.

Analysis of energy recovery and microbial community in an amalgamated CSTR-UASBs reactor for a three-stage anaerobic fermentation process of cornstalks.

In this study, a continuous stirred-tank reactor (CSTR) coupled with up-flow anaerobic sludge beds (UASBs) reactor was successfully developed for enhancing methane production and carbon recovery rate from cornstalks. Acetic acid production was higher in regions A than in B and C. The methane percentage achieved at 75.98% of total gas and methane production of cornstalks was up to 520.07 mL/g, during the stable operation period. The carbon of recovery rate, represented substrates converted to methane gas, reached 69.32% in stable stage. Microbial community structure analysis revealed that Paludibacter, Prevotella/Clostridium sensu stricto, and Caldisericum were the dominant bacteria for the degradation of cellulose, lignin, and other refractory macromolecules in regions A, B, and C, respectively. Methanobacterium and Methanolinea were the two major genera, accounting for methanogenesis generation.

Role of polyurethane-modified layered double hydroxides on SCFAs extraction from waste activated sludge fermentation liquid for elevating denitrification: Kinetics and mechanism.

Extraction of short-chain fatty acids (SCFAs) from fermentation liquid of waste activated sludge (WAS) is the key bottleneck hindering its application as electron donor in denitrification. This study explores the feasibility of polyether-type polyurethane (PU)-modified layered double hydroxides (LDHs, prepared using eggshell waste as calcium source) in SCFAs adsorbing from WAS fermentation liquid (SFL). The adsorption parameters were first optimized by adsorption tests using artificial fermentation liquid (AFL). Then, adsorption kinetics, thermodynamic and isotherms were explored to further understand the adsorption mechanism. It revealed that SCFAs absorption by PU-LDHs from SFL was an endothermic and spontaneous process with positive enthalphy (ΔH◦) values and negative Gibbs free energy (ΔG◦) values. In addition, the maximum adsorption capacity of 208.0 mg SCFAs/g PU-LDHs was obtained from the Langmuir isotherm. Noting that both soluble carbohydrates and soluble proteins were simultaneously extracted, with efficiencies of 30.9%, 6.2%, respectively, compared with 62.9% SCFAs. The reuse tests confirmed that the prepared PU-LDHs can be used at least three times with high adsorptive capacity. With PU-LDHs-loaded SFL as external carbon source in the biodenitrification process, a denitrification rate of 0.014 mg NO3--N/mg mixed liquid suspended solids (MLSS)·d was recorded. This study provided a sound basis for the preparation of cost-effective biodenitrification carbon source from SFL by a novel adsorbent.