Separation of Mono-/Divalent Ions via Controlled Dynamic Adsorption/Desorption at Polythiophene Coated Carbon Surface with Flow-Electrode Capacitive Deionization.

Capacitive deionization for selective separation of ions is rarely reported since it relies on the electrostatic attraction of oppositely charged ions with no capability to distinguish ions of different valent states. Using molecular dynamic simulation, a screening process identified a hybrid material known as AC/PTh, which consists of activated carbon with a thin layer of polythiophene (PTh) coating. By utilizing AC/PTh as electrode material implementing the short-circuit cycle (SCC) mode in flow-electrode capacitive deionization (FCDI), selective separation of mono-/divalent ions can be realized via precise control of dynamic adsorption and desorption of mono-/divalent ions at a particular surface. Specifically, AC/PTh shows strong interaction with divalent ions but weak interaction with monovalent ions, the distribution of divalent ions can be enriched in the electric double layer after a couple of adsorption-desorption cycles. At Cu2+/Na+ molar ratio of 1:40, selectivity toward divalent ions can reach up to 110.3 in FCDI SCC mode at 1.0 V. This work presents a promising strategy for separating ions of different valence states in a continuously operated FCDI device.

Inonotus obliquus aqueous extract inhibits intestinal inflammation and insulin metabolism defects in Drosophila.

In biomedical research, the fruit fly (Drosophila melanogaster) is among the most effective and flexible model organisms. Through the use of the Drosophila model, molecular mechanisms of human diseases can be investigated and candidate pharmaceuticals can be screened. White rot fungus Inonotus obliquus is a member of the family Hymenochaetaceae. Due to its multifaceted pharmacological effects, this fungus has been the subject of scientific investigation. Nevertheless, the precise mechanisms by which Inonotus obliquus treats diseases remain unclear. In this study, we prepared an aqueous extract derived from Inonotus obliquus and demonstrated that it effectively prevented the negative impacts of inflammatory agents on flies, including overproliferation and overdifferentiation of intestinal progenitor cells and decreased survival rate. Furthermore, elevated reactive oxygen species levels and cell death were alleviated by Inonotus obliquus aqueous extract, suggesting that this extract inhibited intestinal inflammation. Additionally, Inonotus obliquus aqueous extract had an impact on the insulin pathway, as it alleviated growth defects in flies that were fed a high-sugar diet and in chico mutants. In addition, we determined the composition of Inonotus obliquus aqueous extract and conducted a network pharmacology analysis in order to identify prospective key compounds and targets. In brief, Inonotus obliquus aqueous extract exhibited considerable potential as a therapeutic intervention for human diseases. Our research has established a foundational framework that supports the potential clinical implementation of Inonotus obliquus.

Solar Driven Gas Phase Advanced Oxidation Processes for Methane Removal - Challenges and Perspectives.

Methane (CH4 ) is a potent greenhouse gas and the second highest contributor to global warming. CH4 emissions are still growing at an alarmingly high pace. To limit global warming to 1.5 °C, one of the most effective strategies is to reduce rapidly the CH4 emissions by developing large-scale methane removal methods. The purpose of this perspective paper is threefold. (1) To highlight the technology gap dealing with low concentration CH4 (at many emission sources and in the atmosphere). (2) To analyze the challenges and prospects of solar-driven gas phase advanced oxidation processes for CH4 removal. And (3) to propose some ideas, which may help to develop solar-driven gas phase advanced oxidation processes and make them deployable at a climate significant scale.

Regulating Surface Wettability and Charge Density of Porous Carbon Particles by In Situ Growth of Polyaniline for Constructing an Efficient Electrical Percolation Network in Flow-Electrode Capacitive Deionization.

Both electrical conductivity and surface wettability are required for the selection of active carbon materials in flow-electrode capacitive deionization, while a trade-off exists between these two properties. In this work, a hybrid material with a thin layer of polyaniline (PANI) coating on activated carbon (AC/PANI) was successfully developed to retain excellent electrical conductivity and acquire good surface wettability. By adjusting the dosage of initiator, AC/PANI composites with different loading fractions of PANI were obtained. The electrochemical testing demonstrated that the AC/PANI composites have higher specific capacitance and lower ion diffusion resistance compared to pure AC, resulting in better desalinization performance. Specifically, with a feed concentration of 1600 mg/L, excellent adsorption capacity and high charge efficiency can be simultaneously achieved at 13.51 mg/g and 92.21%, respectively. Benefiting from the formation of a continuous electrical percolation network and reduced solid/liquid interfacial transport resistance, a 39% enhancement of average salt adsorption rate (from 0.54 to 0.75 µmol/min/cm2) was obtained.

The combined use of 2D scout and 3D axial CT images to accurately determine the catheter tips for high-dose-rate brachytherapy plans.

PURPOSE: To develop a method combining CT scout images with axial images to improve the localization accuracy of catheter tips in high-dose-rate (HDR) brachytherapy treatments. MATERIALS AND METHODS: CT scout images were utilized along with conventionally reconstructed axial images to aid the localization of catheter tips used during HDR treatment planning. A method was developed to take advantage of the finer image resolution of the scout images to more precisely identify the tip coordinates. The accuracies of this method were compared with the conventional method based on the axial CT images alone, for various slice thicknesses, in a computed tomography dose index (CTDI) head phantom. A clinical case which involved multiple interstitial catheters was also selected for the evaluation of this method. Locations of the catheter tips were reconstructed with the conventional CT-based method and this newly developed method, respectively. Location coordinates obtained via both methods were quantitatively compared. RESULTS: Combination of the scout and axial CT images improved the accuracy of identification and reconstruction of catheter tips along the longitudinal direction (i.e., head-to-foot direction, more or less parallel to the catheter tracks), compared to relying on the axial CT images alone. The degree of improvement was dependent on CT slice thickness. For the clinical patient case, the coordinate differences of the reconstructed catheter tips were 2.6 mm ± 0.9 mm in the head-to-foot direction, 0.4 mm ± 0.2 mm in the left-to-right direction, and 0.6 mm ± 0.2 mm in the anterior-to-posterior direction, respectively. CONCLUSION: Combining CT scout and axial images demonstrates the ability to provide a more accurate identification and reconstruction of the interstitial catheter tips for HDR brachytherapy treatment, especially in the longitudinal direction. The method developed in this work has the potential to be implemented clinically together with automatic segmentation in modern brachytherapy treatment planning systems, in order to improve the reconstruction accuracy of HDR catheters.

SQM-LRU: A Harmony Dual-Queue Management Algorithm to Control Non-Responsive LTF Flow and Achieve Service Differentiation.

The increase in network applications diversity and different service quality requirements lead to service differentiation, making it more important than ever. In Wide Area Network (WAN), the non-responsive Long-Term Fast (LTF) flows are the main contributors to network congestion. Therefore, detecting and suppressing non-responsive LTF flows represent one of the key points for providing data transmission with controllable delay and service differentiation. However, the existing single-queue management algorithms are designed to serve only a small number of applications with similar requirements (low latency, high throughput, etc.). The lack of mechanisms to distinguish different traffic makes it difficult to implement differentiated services. This paper proposes an active queue management scheme, namely, SQM-LRU, which realizes service differentiation based on Shadow Queue (SQ) and improved Least-Recently-Used (LRU) strategy. The algorithm consists of three essential components: First, the flow detection module is based on the SQ and improved LRU. This module is used to detect non-responsive LTF flows. Second, different flows will be put into corresponding high or low priority sub-queues depending on the flow detection results. Third, the dual-queue adopts CoDel and RED, respectively, to manage packets. SQM-LRU intends to satisfy the stringent delay requirements of responsive flow while maximizing the throughput of non-responsive LTF flow. Our simulation results show that SQM-LRU outperforms traditional solutions with significant improvement in flow detection and reduces the delay, jitter, and Flow Completion Time (FCT) of responsive flow. As a result, it reduced the FCT by up to 50% and attained 95% of the link utilization. Additionally, the low overhead and the operations incur O(1) cost per packet, making it practical for the real network.

Doubly Covariance Matrix Reconstruction Based Blind Beamforming for Coherent Signals.

This paper proposes a beamforming method in the presence of coherent multipath arrivals at the array. The proposed method avoids the prior knowledge or estimation of the directions of arrival (DOAs) of the direct path signal and the multipath signals. The interferences are divided into two groups based on their powers and the interference-plus-noise covariance matrix (INCM) is reconstructed through the doubly covariance matrix reconstruction concept. The composite steering vector (CSV) that accounts for the direct path signal and multipath signals is estimated as the principal eigenvector of the sample covariance matrix with interferences and noise removed. The optimal weight vector is finally computed using the INCM and the CSV. The proposed method involves no spatial smoothing and avoids reduction in the degree of freedom. Simulation results demonstrate the improved performance of the proposed method.

3D-GIoU: 3D Generalized Intersection over Union for Object Detection in Point Cloud.

Three-dimensional (3D) object detection is an important research in 3D computer vision with significant applications in many fields, such as automatic driving, robotics, and human-computer interaction. However, the low precision is an urgent problem in the field of 3D object detection. To solve it, we present a framework for 3D object detection in point cloud. To be specific, a designed Backbone Network is used to make fusion of low-level features and high-level features, which makes full use of various information advantages. Moreover, the two-dimensional (2D) Generalized Intersection over Union is extended to 3D use as part of the loss function in our framework. Empirical experiments of Car, Cyclist, and Pedestrian detection have been conducted respectively on the KITTI benchmark. Experimental results with average precision (AP) have shown the effectiveness of the proposed network.

Golay Complementary Waveforms in Reed-Müller Sequences for Radar Detection of Nonzero Doppler Targets.

Golay complementary waveforms can, in theory, yield radar returns of high range resolution with essentially zero sidelobes. In practice, when deployed conventionally, while high signal-to-noise ratios can be achieved for static target detection, significant range sidelobes are generated by target returns of nonzero Doppler causing unreliable detection. We consider signal processing techniques using Golay complementary waveforms to improve radar detection performance in scenarios involving multiple nonzero Doppler targets. A signal processing procedure based on an existing, so called, Binomial Design algorithm that alters the transmission order of Golay complementary waveforms and weights the returns is proposed in an attempt to achieve an enhanced illumination performance. The procedure applies one of three proposed waveform transmission ordering algorithms, followed by a pointwise nonlinear processor combining the outputs of the Binomial Design algorithm and one of the ordering algorithms. The computational complexity of the Binomial Design algorithm and the three ordering algorithms are compared, and a statistical analysis of the performance of the pointwise nonlinear processing is given. Estimation of the areas in the Delay-Doppler map occupied by significant range sidelobes for given targets are also discussed. Numerical simulations for the comparison of the performances of the Binomial Design algorithm and the three ordering algorithms are presented for both fixed and randomized target locations. The simulation results demonstrate that the proposed signal processing procedure has a better detection performance in terms of lower sidelobes and higher Doppler resolution in the presence of multiple nonzero Doppler targets compared to existing methods.

Lignin from Hardwood and Softwood Biomass as a Lubricating Additive to Ethylene Glycol.

Ethylene glycol (EG)-based lubricant was prepared with dissolved organosolv lignin from birch wood (BL) and softwood (SL) biomass. The effects of different lignin types on the rheological, thermal, and tribological properties of the lignin/EG lubricants were comprehensively investigated by various characterization techniques. Dissolving organosolv lignin in EG results in outstanding lubricating properties. Specifically, the wear volume of the disc by EG-44BL is only 8.9% of that lubricated by pure EG. The enhanced anti-wear property of the EG/lignin system could be attributed to the formation of a robust lubrication film and the strong adhesion of the lubricant on the contacting metal surface due to the presence of a dense hydrogen bonding (H-bonding) network. The lubricating performance of EG-BL outperforms EG-SL, which could be attributed to the denser H-bonding sites in BL and its broader molecular weight distribution. The disc wear loss of EG-44BL is only 45.7% of that lubricated by EG-44SL. Overall, H-bonding is the major contributor to the different tribological properties of BL and SL in EG-based lubricants.

Molecular insight into the Mullins effect: irreversible disentanglement of polymer chains revealed by molecular dynamics simulations.

The debate regarding the possible molecular origins of the Mullins effect has been ongoing since its discovery. Molecular dynamics (MD) simulations were carried out to elucidate the underlying mechanism of the Mullins effect. For the first time, the key characteristics associated with the Mullins effect, including (a) the majority of stress softening occurring in the first stretch, (b) continuous softening with stress increase, (c) a permanent set, and (d) recovery with heat treatment, are captured by molecular modeling. It is discovered that the irreversible disentanglement of polymer chains is physically sufficient to interpret these key characteristics, providing molecular evidence for this long-controversial issue. Our results also reveal that filled polymers exhibit three distinct regimes, i.e., the polymer matrix, the interface, and the filler. When subjected to external strain, the polymer matrix suffers from excess deformation, indicating strong heterogeneity within the filled polymer, which offers molecular insight for the formulation of physics-based constitutive relations for filled polymers.

Range Sidelobe Suppression Using Complementary Sets in Distributed Multistatic Radar Networks.

We propose an alternative waveform scheme built on mutually-orthogonal complementary sets for a distributed multistatic radar. Our analysis and simulation show a reduced frequency band requirement for signal separation between antennas with centralized signal processing using the same carrier frequency. While the scheme can tolerate fluctuations of carrier frequencies and phases, range sidelobes arise when carrier frequencies between antennas are significantly different.

Pore size dependent molecular adsorption of cationic dye in biomass derived hierarchically porous carbon.

Hierarchically porous carbon adsorbents were successfully fabricated from different biomass resources (softwood, hardwood, bamboo and cotton) by a facile two-step process, i.e. carbonization in nitrogen and thermal oxidation in air. Without involving any toxic/corrosive chemicals, large surface area of up to 890 m2/g was achieved, which is comparable to commercial activated carbon. The porous carbons with various surface area and pore size were used as adsorbents to investigate the pore size dependent adsorption phenomenon. Based on the density functional theory, effective (E-SSA) and ineffective surface area (InE-SSA) was calculated considering the geometry of used probing adsorbate. It was demonstrated that the adsorption capacity strongly depends on E-SSA instead of total surface area. Moreover, a regression model was developed to quantify the adsorption capacities contributed from E-SSA and InE-SSA, respectively. The applicability of this model has been verified by satisfactory prediction results on porous carbons prepared in this work as well as commercial activated carbon. Revealing the pore size dependent adsorption behavior in these biomass derived porous carbon adsorbents will help to design more effective materials (either from biomass or other carbon resources) targeting to specific adsorption applications.

A pH-responsive supramolecular polymer gel as an enteric elastomer for use in gastric devices.

Devices resident in the stomach-used for a variety of clinical applications including nutritional modulation for bariatrics, ingestible electronics for diagnosis and monitoring, and gastric-retentive dosage forms for prolonged drug delivery-typically incorporate elastic polymers to compress the devices during delivery through the oesophagus and other narrow orifices in the digestive system. However, in the event of accidental device fracture or migration, the non-degradable nature of these materials risks intestinal obstruction. Here, we show that an elastic, pH-responsive supramolecular gel remains stable and elastic in the acidic environment of the stomach but can be dissolved in the neutral-pH environment of the small and large intestines. In a large animal model, prototype devices with these materials as the key component demonstrated prolonged gastric retention and safe passage. These enteric elastomers should increase the safety profile for a wide range of gastric-retentive devices.

Molecular Transformation, Diffusion, and Assembling into Three-Dimensional Freestanding Tube Arrays via a Triphasic Reaction.

Converting nitrobenzene to freestanding polyaniline tube arrays has been successfully carried out in a "water-oil-water" triphasic reaction system, where catalytic reduction of nitrobenzene to aniline and aniline polymerization reactions were synergistically integrated. With optimized control over molecular diffusion and reaction at separate solid/liquid and liquid/liquid interfaces, polyaniline nanostructures could be synthesized with different morphologies. The paired molecular diffusion and reaction rate is revealed as the dominating factor that determines the feasibility of the reaction system to produce a patterned array structure. Slow molecular diffusion leads to a better ordered three-dimensional (3D) assembling structure. This work demonstrates a new approach to control 3D assembling structures with integrated control on diffusion and reaction across multiple liquid/liquid interfaces.

Longer rest intervals do not attenuate the superior effects of accumulated exercise on arterial stiffness.

PURPOSE: To examine and compare the acute effects of moderate-intensity continuous and accumulated exercise in three bouts with different intervals on arterial stiffness. METHOD: Nineteen healthy young males (mean age = 24.7 years) were randomized to no-exercise control (CON), continuous exercise (CE, 30-min cycling), accumulated exercise with 10-min intervals (AE10, 3 × 10-min cycling, 10-min interval), and accumulated exercise with 60-min intervals (AE60, 3 × 10-min cycling, 60-min interval) trial in balanced self-control crossover design. The intensity in all the exercise trials was set at 50% heart rate reserve. Cardio-ankle vascular index (CAVI), an index of arterial stiffness, was measured at baseline (BL), immediately after (0 min) and 60 min after the completion of the exercise. RESULTS: CAVI remained stable (6.8 ± 0.1, 6.8 ± 0.2, 6.9 ± 0.1 at BL, 0 and 60 min, respectively) in CON trial. Immediately after exercise, CAVI in CE, AE10 and AE60 trials all decreased significantly to similar degree compared to CON trial (P < 0.05 for CE, AE10 and AE60 vs. CON). Though CAVI in CE trial returned to baseline level after 60 min of recovery, CAVI in both AE10 and AE60 trials remained significantly low compared to CON trial (P < 0.01 for AE10 and AE60 vs. CON). CONCLUSION: When the total duration and relative intensity were matched, the effects of accumulated exercise in three bouts were superior to continuous exercise. Elongation of intervals between bouts did not attenuate the superior effects of accumulated exercise on arterial stiffness. TRIAL REGISTRATION: ChiCTR-OTRCC-14005229.

Isolation, Identification, and Carbonate Mineralization Characteristics of a Newly Carbonic Anhydrase-Producing Strain.

Carbonic anhydrase-producing microorganisms can rely on their metabolism for carbon sequestration and carbonate precipitation, which is a relatively effective mode among the known microbially induced carbonate precipitation (MICP) methods. A newly carbonic anhydrase-producing strain was isolated from soil samples. 16S rDNA gene sequencing showed this strain had 99.18% sequence identity to Chryseobacterium gambrini. Various culture parameters (temperature, pH, rotational speed, inoculum size, and metal ions) were optimized for optimal microbial growth and CA activities. Optimal culture conditions were as follows: temperature of 30 °C, pH 6-7, rotational speed 150 rpm, and inoculum size 1%. It was observed that Co2+ and Mn2+ can improve CA activity with optimal concentrations of 0.02 mM and 0.01 mM, respectively. Furthermore, the introduction of CO2 for 15 min daily leads to a 36% increase in the final production of biotic CaCO3, reaching 2.884 g/L. Characterization of the mineralization precipitates was conducted to reveal the mechanism of the carbonic anhydrase-producing bacterium. Lastly, an analysis of the crystalline species and content of the biogenic CaCO3 was performed to lay the groundwork for future crystalline adjustments and to offer technical support for the application of the calcium method.

Facing the solid waste of cotton straw and plastic mulch film mixture in China: Centralized or decentralized pyrolysis facility?

The widespread use of plastic mulch film (PMF) has led to significant environmental pollution, with PMF residues dispersed and mixed with straw and soil, posing challenges for recycling. Here, we proposed the mobile pyrolysis facility for the cotton straw and mulch film mixture (CMM) to mitigate the collection, storage, and transportation costs, while the application of co-pyrolysis technology for CMM conversion could improve the added value of products. Additionally, centralized combustion power generation and centralized pyrolysis systems were also established to evaluate and compare their sustainability from economic and environmental perspectives. Results showed that mobile pyrolysis has better economic performance than the centralized scenarios, due to its high internal rate of return (31 %) and significant net present value (29.21 M USD). Meanwhile, the mobile pyrolysis facility achieved a GWP of -1.298 kgCO2-eq/kg, reducing emissions by 70.79 % and 38.82 % compared to the two centralized scenarios. In conclusion, mobile pyrolysis technology provides a promising solution for PMF residue recycling because of its economically competitive approach with a lower carbon footprint.

Orostachys malacophylla (pall.) fisch extracts alleviate intestinal inflammation in Drosophila.

ETHNOPHARMACOLOGICAL RELEVANCE: Orostachys malacophylla (Pall.) Fisch (O. malacophylla) is a succulent herbaceous plant that is the Orostachys genus of Crassulaceae family. O. malacophylla has been widely used as a traditional Chinese medicine with antioxidant, anti-inflammatory, anti-febrile, antidote, anti-Toxoplasma gondii properties. However, the biological function of alleviating intestinal inflammation and key bioactive compounds were still unknown. AIM OF THE STUDY: We used a Drosophila model to study the protective effects and bioactive compounds of O. malacophylla water extract (OMWE) and butanol extract (OMBE) on intestinal inflammation. MATERIALS AND METHODS: Drosophila intestinal inflammation was induced by oral invasion of dextran sodium sulfate (DSS) or Erwinia carotovora carotovora 15 (Ecc15). We revealed the protective effects of two extracts by determining intestinal reactive oxygen species (ROS) and antimicrobial peptide (AMP) levels and intestinal integrity, and using network pharmacology analysis to identify bioactive compounds. RESULTS: We demonstrated that both OMWE and OMBE could ameliorate the detrimental effects of DSS, including a decreased survival rate, elevated ROS levels, increased cell death, excessive proliferation of ISCs, acid-base imbalance, and disruption of intestinal integrity. Moreover, the overabundance of lipid droplets (LDs) and AMPs by Ecc15 infection is mitigated by these extracts, thereby enhancing the flies' resistance to adverse stimuli. In addition, we used widely targeted metabolomics and network pharmacology analysis to identify bioactive compounds associated with IBD healing that are present in OMWE and OMBE. CONCLUSIONS: In summary, our research indicates that OMWE and OMBE significantly mitigate intestinal inflammation and have the potential to be effective therapeutic agents for IBD in humans.

Adipocyte Progenitor Pools Composition and Cellular Niches Affect Adipogenesis Divergence in Porcine Subcutaneous and Intramuscular Fat.

Intramuscular fat (IMF) contributed positively to pork quality, whereas subcutaneous fat (SCF) was often considered to be a detrimental factor impacting growth and carcass traits. Reducing SCF while maintaining optimal IMF levels requires a thorough understanding of the adipogenic differences between these two adipose depots. Our study explored the differences in adipogenesis between porcine IMF and SCF, and the results showed that subcutaneous adipocytes (SCAs) demonstrate a greater potential for adipogenic differentiation, both in vivo and in vitro. Lipidomic and transcriptomic analyses suggested that intramuscular adipocytes (IMAs) are more inclined to biosynthesize unsaturated fatty acids. Furthermore, single-cell RNA sequencing (scRNA-seq) was employed to dissect the intrinsic and microenvironmental discrepancies in adipogenesis between porcine IMF and SCF. Comparative analysis indicated that SCF was enriched with preadipocytes, exhibiting an enhanced adipogenic potential, while IMF was characterized by a higher abundance of stem cells. Furthermore, coculture analyses of porcine intramuscular adipogenic cells and myogenetic cells indicated that the niche of IMAs inhibited its adipogenic differentiation. Cell communication analysis identified 160 ligand-receptor pairs and channels between adipogenic and myogenetic cells in IMF. Collectively, our study elucidated two intrinsic and microenvironmental novel mechanisms underpinning the divergence in adipogenesis between porcine SCF and IMF.