Reconstructed covalent organic frameworks.

Covalent organic frameworks (COFs) are distinguished from other organic polymers by their crystallinity1-3, but it remains challenging to obtain robust, highly crystalline COFs because the framework-forming reactions are poorly reversible4,5. More reversible chemistry can improve crystallinity6-9, but this typically yields COFs with poor physicochemical stability and limited application scope5. Here we report a general and scalable protocol to prepare robust, highly crystalline imine COFs, based on an unexpected framework reconstruction. In contrast to standard approaches in which monomers are initially randomly aligned, our method involves the pre-organization of monomers using a reversible and removable covalent tether, followed by confined polymerization. This reconstruction route produces reconstructed COFs with greatly enhanced crystallinity and much higher porosity by means of a simple vacuum-free synthetic procedure. The increased crystallinity in the reconstructed COFs improves charge carrier transport, leading to sacrificial photocatalytic hydrogen evolution rates of up to 27.98 mmol h-1 g-1. This nanoconfinement-assisted reconstruction strategy is a step towards programming function in organic materials through atomistic structural control.

Constructing Photocatalytic Covalent Organic Frameworks with Aliphatic Linkers.

Photocatalytic covalent organic frameworks (COFs) are typically constructed with rigid aromatic linkers for crystallinity and extended π-conjugation. However, the essential hydrophobicity of the aromatic backbone can limit their performances in water-based photocatalytic reactions. Here, we for the first time report the synthesis of hydrophilic COFs with aliphatic linkers [tartaric acid dihydrazide (TAH) and butanedioic acid dihydrazide] that can function as efficient photocatalysts for H2O2 and H2 evolution. In these hydrophilic aliphatic linkers, the specific multiple hydrogen bonding networks not only enhance crystallization but also ensure an ideal compatibility of crystallinity, hydrophilicity, and light harvesting. The resulting aliphatic linker COFs adopt an unusual ABC stacking, giving rise to approximately 0.6 nm nanopores with an improved interaction with water guests. Remarkably, both aliphatic linker-based COFs show strong visible light absorption, along with a narrow optical band gap of ∼1.9 eV. The H2O2 evolution rate for TAH-COF reaches up to 6003 µmol h-1 g-1, in the absence of sacrificial agents, surpassing the performance of all previously reported COF-based photocatalysts. Theoretical calculations reveal that the TAH linker can enhance the indirect two-electron oxygen reduction reaction for H2O2 production by improving the O2 adsorption and stabilizing the *OOH intermediate. This study opens a new avenue for constructing semiconducting COFs using nonaromatic linkers.

Palladium-Catalyzed Enantioselective Multicomponent Cross-Coupling of Trisubstituted Olefins.

The development of a catalytic method for stereogenic carbon center formation holds immense significance in organic synthesis. Transition-metal-catalyzed cross-coupling reaction has been regarded as a straightforward and efficient tool for stereoselectively forging C-C bond. Nevertheless, the creation of acyclic all-carbon quaternary-containing vicinal stereocenters remains notoriously challenging within the domain of cross-coupling chemistry despite their prominence in various bioactive small molecules. Herein, we describe a palladium-catalyzed asymmetric multicomponent cross-coupling of trisubstituted alkene with aryl diazonium salts and arylboronic acids to realize the formation of tertiary-quaternary carbon centers with high regio-, distereo-, and enantioselectivity. Specifically, the precise manipulation of the stereoconfiguration of trisubstituted alkenes enables the divergent stereoselective cross-coupling reaction, thus allowing for the facile construction of all four enantiomers. Harnessing the ligand-swap strategy involving a chiral bisoxazoline and an achiral fumarate individually accelerates the enantioselective migratory insertion and reductive elimination step in the cross-coupling process, as supported by density functional theory (DFT) calculations, thus obviating the requirement for a neighboring directing group within the internal olefin skeleton.

Photo-Triggered Fluorescence Polyelectrolyte Nanoassemblies: Manipulate and Boost Singlet Oxygen in Photodynamic Therapy.

Photodynamic therapy (PDT) is a clinically approved therapeutic modality that has shown great potential for cancer treatment. However, there exist two major problems hindering PDT applications: the nonspecific phototoxicity requiring patients to stay in dark post-PDT, and the limited photodynamic efficiency. Herein, we report a photo-triggered porphyrin polyelectrolyte nanoassembling (photo-triggered PPN) strategy, in which porphyrin photosensitizer and photoswitchable energy accepter are assembled into polyelectrolyte micelles by a combined force of charge interaction and metal-ligand coordination. The polyelectrolyte-based PPN exhibits good biocompatibility, and bestows a unique "confining isolated" inner microenvironment for fully overcoming the π-π stacking of porphyrins with significant photodynamic efficiency (123-fold enhancement). Due to the high Förster resonance energy transfer (FRET) (91.5%) between porphyrin and photoswitch in closed-form, we could use light as a specific trigger to modulate photoswitch between closed- and open-form, and manipulate the 1O2 generation in three stages: pre-PDT (quenching 1O2 generation), during PDT (activating 1O2 generation), and post-PDT (silencing 1O2 generation). This de novo strategy has for the first time realized remotely manipulating and boosting 1O2 generation in PDT, well resolving the critical and general challenges of limited photodynamic efficiency and side effects from nonspecific phototoxicity.

Formamidinium Lead Iodide-Based Inverted Perovskite Solar Cells with Efficiency over 25 % Enabled by An Amphiphilic Molecular Hole-Transporter.

Formamidinium lead iodide (FAPbI3) represents an optimal absorber material in perovskite solar cells (PSCs), while the application of FAPbI3 in inverted-structured PSCs has yet to be successful, mainly owing to its inferior film-forming on hydrophobic or defective hole-transporting substrates. Herein, we report a substantial improvement of FAPbI3-based inverted PSCs, which is realized by a multifunctional amphiphilic molecular hole-transporter, (2-(4-(10H-phenothiazin-10-yl)phenyl)-1-cyanovinyl)phosphonic acid (PTZ-CPA). The phenothiazine (PTZ) based PTZ-CPA, carrying a cyanovinyl phosphonic acid (CPA) group, forms a superwetting hole-selective underlayer that enables facile deposition of high-quality FAPbI3 thin films. Compared to a previously established carbazole-based hole-selective material (2-(3,6-dimethoxy-9H-carbazol-9-yl)ethyl)phosphonic acid (MeO-2PACz), the crystallinity of FAPbI3 is enhanced and the electronic defects are passivated by the PTZ-CPA more effectively, resulting in remarkable increases in photoluminescence quantum yield (four-fold) and Shockley-Read-Hall lifetime (eight-fold). Moreover, the PTZ-CPA shows a larger molecular dipole moment and improved energy level alignment with FAPbI3, benefiting the interfacial hole-collection. Consequently, FAPbI3-based inverted PSCs achieve an unprecedented efficiency of 25.35 % under simulated air mass 1.5 (AM1.5) sunlight. The PTZ-CPA based device shows commendable long-term stability, maintaining over 90 % of its initial efficiency after continuous operation at 40 °C for 2000 hours.

Liquid Crystal Assembly for Ultra-dissymmetric Circularly Polarized Luminescence and Beyond.

Circularly polarized luminescence (CPL) is attracting much interest because it can carry extensive optical information. CPL shows left- or right-handedness and can be regarded as part of high-level visual perception to supply an extra dimension of information with regard to regular light. A key to meeting the needs for practical applications is to develop the emerging field of ultra-dissymmetric CPL. Chiral liquid crystal (LC) assemblies─otherwise referred to as cholesteric liquid crystals (CLCs)─are essentially organized helical superstructures with a highly ordered one-dimensional orientation, and distinctly superior to regular helical supramolecules. CLCs can achieve a perfect equilibrium of molecular short-range interaction and long-range orientational order, enabling molecule-scale chirality on a helical pitch and observable scale. LC assembly could be an ideal strategy for amplifying chirality, making it accessible to ultra-dissymmetric CPL. Herein, we focused on some basic but important issues regarding CPL: (i) How can CPL be created from chiral dyes? (ii) Is the chirality of luminescent dyes an essential factor for the generation of CPL? That is, can all chiral dyes emit CPL and vice versa? (iii) How can CPL be transferred within intermolecular systems, and what principles of CPL transmission should be followed? Given these queries and our work, in this Perspective we discuss the generation, transmission, and modulation of CPL with chiral LC assembly, aiming to design and build up novel chiroptical materials. Recent applications of CPL-active LC microstructures in three-dimensional displays, circularly polarized lasers, and asymmetric catalysis are also discussed.

Serum-Based Detection of Liver Pathology Using a Fluorogenic Alkaline Phosphatase Probe.

Development of "ultrahigh contrast" fluorogenic probes for trapping alkaline phosphatase (ALP) activities in human serum is highly desirable for clinical auxiliary diagnosis for hepatobiliary diseases. However, the intrinsic dilemma of incomplete ionization of intramolecular charge transfer (ICT)-based ALP fluorophores and autofluorescence interference of serum result in low sensitivity and accuracy. Given that unique halogen effects could lead to a drastic decrease in the pKa value and a significant enhancement in the fluorescence quantum yield, herein we report an enzyme-activatable near-infrared probe based on a difluoro-substituted dicyanomethylene-4H-chromenep for achieving fluorescent quantification of human serum ALP. Rational design strategy is demonstrated by altering the substituted halogen groups to well regulate the pKa for meeting the physiological precondition. Owing to the complete ionization at pH 7.4 with tremendous fluorescence enhancement, the difluoro-substituted DCM-2F-HP manifests a linear relationship between the emission intensity and ALP concentration in both solution and serum samples. Along with measuring 77 human serum samples, the DCM-2F-HP based fluorescence method not only exhibits significant correlations with clinical colorimetry, but also distinguishes ALP patients from healthy volunteers, as well as assessing the progress of liver disease, thus providing a potential toolbox for quantitatively detecting ALP and warning the stage of hepatopathy.

Sterically Hindered Diarylethenes with a Benzobis(thiadiazole) Bridge: Enantiospecific Transformation and Reversible Photosuperstructures.

ConspectusPhotochromic diarylethenes featuring reversible regulation by external light irradiation have attracted increasing attention in versatile applications such as logic gates, supramolecular systems, liquid crystals, and super-resolution imaging because of their outstanding bistability and fatigue resistance. However, for typical diarylethene systems, there always exist three typical unsolved issues. The first is how to modulate the bistability between the open and closed forms from the viewpoint of ethene bridge aromaticity. The second is how to decrease and avoid the photoinactive parallel conformer in order to achieve a high quantum yield, since the open form possesses the photoactive antiparallel (ap) conformation and the photoinactive parallel (p) conformation. Because of the typical rapid rotation of the flexible side aryl groups, the two conformers cannot be separated efficiently, thereby resulting in a relatively low photocyclization quantum yield. The third is how to fulfill the enantiospecific transformation with reversibility to photomodulate the chirality. Stereochemically, the ap conformer with C2 symmetry can be further subdivided into a pair of enantiomers with P and M helicity originating from the central hexatriene moiety. Similarly, the rapid rotation can also lead to the loss of intrinsic chirality, restricting the development and application of light-driven chiroptical switches. Accordingly, it is desirable to construct a specific diarylethene system to break through these bottlenecks for real versatile applications.Our group has recently developed a unique sterically hindered diarylethene system based on benzobis(thiadiazole) as the ethene bridge for completely solving these issues. We introduce a low-aromaticity benzobis(thiadiazole) unit into the diarylethene as a central ethene bridge with incomparably high bistability. To block or freeze the rotation of flexible side aryls, we further incorporate a large bulky benzothiophene unit to induce a large steric hindrance, or rotation barrier, between the ethene bridge and side aryls, thereby successfully separating multiple conformers of the diarylethenes with high photocyclization quantum yields and enantiospecific photoreaction. Consequently, given such a fantastic building block, we enhance its performance by means of supramolecular self-assembly, thereby realizing unique conformer-dependent self-assembly as well as unprecedented concerted isomerization and enantiospecific photoreaction of photoresponsive metallacycles. In addition, decoration of the intrinsically chiral diarylethenes with mesogenic units can enable us to manipulate the helical superstructure of liquid crystals, thus achieving a multiple anticounterfeiting technique and a quadridimensional manipulable laser. We also unravel the dual aggregation-induced emission (AIE) behavior of the sterically hindered diarylethene, especially as applied in super-resolution imaging.

Efficient Visible-Light-Activated Ultra-Long Room-Temperature Phosphorescence Triggered by Multi-Esterification.

The development of ultra-long room-temperature phosphorescence (UL-RTP) in processable amorphous organic materials is highly desirable for applications in flexible displays, anti-counterfeiting, and bio-imaging. However, achieving efficient UL-RTP from amorphous materials remains a challenging task, especially with activation by visible light and a bright afterglow. Here we report a general and rational molecular-design strategy to enable efficient visible-light-excited UL-RTP by multi-esterification of a rigid large-plane phosphorescence core. Notably, multi-esterification minimizes the aggregation-induced quenching and accomplishes a 'four birds with one stone' possibility in the generation and radiation process of UL-RTP: i) shifting the excitation from ultraviolet light to blue-light through enhancing the transition dipole moment of low-lying singlet-states, ii) facilitating the intersystem crossing process through the incorporation of lone-pair electrons, iii) boosting the decay process of long-lived triplet excitons resulting from a significantly increased transition dipole moment, and iv) reducing the intrinsic triplet nonradiative decay by substitution of high-frequency vibrating hydrogen atoms. All these factors synergistically contribute to the most efficient and stable visible-light-stimulated UL-RTP (lifetime up to 2.01 s and efficiency up to 35.4 % upon excitation at 450 nm) in flexible films using multi-esterified coronene, which allows high-tech applications in single-component time-delayed white light-emitting diodes and information technology based on flashlight-activated afterglow encryption.

Light-Reconfiguring Inhomogeneous Soft Helical Pitch with Fatigue Resistance and Reversibility.

Active engineering and modulation of optical spectra in a remote and fully reversible light is urgently desired in photonics, chemistry, and materials. However, the real-time regulation of multiple optical information such as wavelength, bandwidth, reflectance, and polarization is still a longstanding issue due to the lack of an appropriate photoresponsive candidate. Herein, we propose an additional "degree-of-freedom (DOF)" in a photo-modulated soft helix, and build up an unprecedented inhomogeneous helical pitch length with light-reconfiguring property, fatigue resistance, and reversibility. For the working model, the intrinsic chiral photoswitch LBC5 is employed as an actuator to modulate the helical pitch length, which is proportional to the irradiation intensity, and the unique broadband absorbance photo-modulator BTA-C5 is incorporated as an attenuator of the transmitted light to decrease its intensity along the sample thickness, therefore successfully adding another controlled DOF on the pitch length distribution (i.e., homogeneous or inhomogeneous) apart from the common soft helix with only a single DOF on the pitch length. The absorbance photo-modulator BTA-C5 with a unique variable broadband absorption enables the light to reconfigure the helical pitch from homogeneous to inhomogeneous, thereby achieving the robust fatigue-resistance establishment of reversible spectral programming. The established light-reconfigurable inhomogeneous helical pitch with the photoresponsive modulator BTA-C5 can provide a breakthrough to control absorbance and chirality, especially for dynamically broadening and narrowing the bandwidth on demand, and further enable the ever-desired broadband NIR circularly polarized luminescence (CPL) with a high dissymmetry factor glum of up to 1.88. The cutting-edge photoswitchable inhomogeneous soft helical pitch provides access to multi-freedom control in soft materials, optics, biophotonics, and other relevant fields.

Tricyano-Methylene-Pyridine Based High-Performance Aggregation-Induced Emission Photosensitizer for Imaging and Photodynamic Therapy.

Photosensitizers equipped with high reactive oxygen species (ROS) generation capability and bright emission are essential for accurate tumor imaging and precise photodynamic therapy (PDT). However, traditional aggregation-caused quenching (ACQ) photosensitizers cannot simultaneously produce desirable ROS and bright fluorescence, resulting in poor image-guided therapy effect. Herein, we report an aggregation-induced emission (AIE) photosensitizer TCM-Ph with a strong donor-π-acceptor (D-π-A) structure, which greatly separates the HOMO-LUMO distribution and reduces the ΔEST, thereby increasing the number of triplet excitons and producing more ROS. The AIE photosensitizer TCM-Ph has bright near-infrared emission, as well as a higher ROS generation capacity than the commercial photosensitizers Bengal Rose (RB) and Chlorine e6 (Ce6), and can effectively eliminate cancer cells under image guidance. Therefore, the AIE photosensitizer TCM-Ph has great potential to replace the commercial photosensitizers.

Photoswitchable Fluorescent Self-Assembled Metallacycles with High Photostability.

In this study, photoswitchable fluorescent supramolecular metallacycles with high fatigue-resistance have been constructed by coordination-driven self-assembly by using bithienylethene with dipyridyl units (BTE) as a coordination donor and a fluorescent di-platinum(II) (Pt-F) as a coordination acceptor. The photo-triggered reversible transformation between the ring-open and ring-closed form of the metallacycles was confirmed by 1 H NMR, 31 P NMR, and UV/Vis spectroscopy. This unique property enabled a reversible noninvasive "off-on" switching of fluorescence through efficient Förster resonance energy transfer (FRET). Importantly, the metallacycles remained structurally intact after up to 10 photoswitching cycles. The photoresponsive property and exceptional photostability of the metallacycles posit their potential promising application in optical switching, image storage, and super-resolution microscopy.

A Coplanar π-Extended Quinoxaline Based Hole-Transporting Material Enabling over 21 % Efficiency for Dopant-Free Perovskite Solar Cells.

Developing dopant-free hole transporting materials (HTMs) is of vital importance for addressing the notorious stability issue of perovskite solar cells (PSCs). However, efficient dopant-free HTMs are scarce. Herein, we improve the performance of dopant-free HTMs featuring with a quinoxaline core via rational π-extension. Upon incorporating rotatable or chemically fixed thienyl substitutes on the pyrazine ring, the resulting molecular HTMs TQ3 and TQ4 show completely different molecular arrangement as well as charge transporting capabilities. Comparing with TQ3, the coplanar π-extended quinoxaline based TQ4 endows enriched intermolecular interactions and stronger π-π stacking, thus achieving a higher hole mobility of 2.08×10-4  cm2 V-1 s-1 . It also shows matched energy levels and high thermal stability for application in PSCs. Planar n-i-p structured PSCs employing dopant-free TQ4 as HTM exhibits power conversion efficiency (PCE) over 21 % with excellent long-term stability.

Circularly Polarized Fluorescence Resonance Energy Transfer (C-FRET) for Efficient Chirality Transmission within an Intermolecular System.

The occurrence and transmission of chirality is a fascinating characteristic of nature. However, the intermolecular transmission efficiency of circularly polarized luminescence (CPL) remains challenging due to poor through-space energy transfer. We report a unique CPL transmission from inducing the achiral acceptor to emit CPL within a specific liquid crystal (LC)-based intermolecular system through a circularly polarized fluorescence resonance energy transfer (C-FRET), wherein the luminescent cholesteric LC is employed as the chirality donor, and rationally designed achiral long-wavelength aggregation-induced emission (AIE) fluorophore acts as the well-assembled acceptor. In contrast to photon-release-and-absorption, the chirality transmission channel of C-FRET is highly dependent upon the energy resonance in the highly intrinsic chiral assembly of cholesteric LC, as verified by deliberately separating the achiral acceptor from the chiral donor to keep it far beyond the resonance distance. This C-FRET mode provides a de novo strategy concept for high-level information processing for applications such as high-density data storage, combinatorial logic calculation, and multilevel data encryption and decryption.

Efficient Solar Cells Based on Concerted Companion Dyes Containing Two Complementary Components: An Alternative Approach for Cosensitization.

With the purpose to achieve panchromatic absorption for constructing efficient dye-sensitized solar cells (DSSCs), the cosensitization approach of using two dyes with complementary absorption has been developed with great success. However, this approach usually requires time-consuming optimization of a number of parameters for controlling the ratio and distribution of the two coadsorbed dyes on TiO2 film, which limits the potentials of this strategy. We herein report an alternative approach for developing efficient DSSCs by designing a class of "concerted companion dyes" with two complementary dye components linked covalently. Thus, a newly synthesized organic dye Z2 was linked to a recently reported doubly strapped porphyrin dye XW51 through flexible chains with various lengths to afford XW60-XW63. These dyes exhibit excellent absorption and efficiencies in the range of 8.8%-11.7%. Notably, upon coadsorption with chenodeoxycholic acid, XW61 affords an impressive efficiency of 12.4%, a record for iodine electrolyte-based DSSCs, to the best of our knowledge. In addition, these dyes also exhibit the advantages of easy cell fabrication, simple optimization, as well as excellent photostability.

High-Performance Quinoline-Malononitrile Core as a Building Block for the Diversity-Oriented Synthesis of AIEgens.

In vivo fluorescent monitoring of physiological processes with high-fidelity is essential in disease diagnosis and biological research, but faces extreme challenges due to aggregation-caused quenching (ACQ) and short-wavelength fluorescence. The development of high-performance and long-wavelength aggregation-induced emission (AIE) fluorophores is in high demand for precise optical bioimaging. The chromophore quinoline-malononitrile (QM) has recently emerged as a new class of AIE building block that possesses several notable features, such as red to near-infrared (NIR) emission, high brightness, marked photostability, and good biocompatibility. In this minireview, we summarize some recent advances of our established AIE building block of QM, focusing on the AIE mechanism, regulation of emission wavelength and morphology, the facile scale-up and fast preparation for AIE nanoparticles, as well as potential biomedical imaging applications.

Unraveling Dual Aggregation-Induced Emission Behavior in Steric-Hindrance Photochromic System for Super Resolution Imaging.

Unprecedented dual aggregation-induced emission (AIE) behavior based on a steric-hindrance photochromic system is presented, with incorporation one or two bulky aryl groups, resulting in different flexibleness. The dual AIE behavior of open and closed isomers can be explained by restriction of intramolecular rotation (RIR), restriction of intramolecular vibration (RIV), and intermolecular stacking. The large bulky benzothiophene causes restricted rotation, enhancing the emission of open form in solution and weak π-π molecular packing, thereby efficiently enhancing the luminescence performance in the solid state. With incorporation of two large bulky benzothiophene groups, BBTE possesses the most outstanding AIE activity, undergoing highly efficient and reversible off-to-on fluorescence in film upon alternating UV and visible light irradiation along with excellent fatigue resistance. The off-to-on fluorescent photoswitch is successfully established in super resolution imaging.

Spatio-Temporally Reporting Dose-Dependent Chemotherapy via Uniting Dual-Modal MRI/NIR Imaging.

Unpredictable in vivo therapeutic feedback of hydroxyl radical (. OH) efficiency is the major bottleneck of chemodynamic therapy. Herein, we describe novel Fenton-based nanotheranostics NQ-Cy@Fe&GOD for spatio-temporally reporting intratumor . OH-mediated treatment, which innovatively unites dual-channel near-infrared (NIR) fluorescence and magnetic resonance imaging (MRI) signals. Specifically, MRI signal traces the dose distribution of Fenton-based iron oxide nanoparticles (IONPs) with high-spatial resolution, meanwhile timely fluorescence signal quantifies . OH-mediated therapeutic response with high spatio-temporal resolution. NQ-Cy@Fe&GOD can successfully monitor the intracellular release of IONPs and . OH-induced NQO1 enzyme in living cells and tumor-bearing mice, which makes a breakthrough in conquering the inherent unpredictable obstacles on spatio-temporally reporting chemodynamic therapy, so as to manipulate dose-dependent therapeutic process.

A Sequential Dual-Lock Strategy for Photoactivatable Chemiluminescent Probes Enabling Bright Duplex Optical Imaging.

Chemiluminescence (CL)-based technologies have revolutionized in vivo monitoring of biomolecules. However, significant technical hurdles have limited the achievement of trigger-controlled, bright, and enriched CL signal. Herein, a dual-lock strategy uses sequence-dependent triggers for bright optical imaging with real-time fluorescent signal and ultra-sensitive CL signal. These probes can obtain an analyte-triggered accumulation of stable pre-chemiluminophore with aggregation-induced emission (AIE), and then the pre-chemiluminophore exhibits a rapid photooxidation process (1,2-dioxetane generation) by TICT-based free-radical addition, thereby achieving an enrichment and bright CL signal. The dual-lock strategy expands the in vivo toolbox for highly accurate analysis and has for the first time allowed access to accurately sense and trace biomolecules with high-resolution, dual-mode of chemo-fluoro-luminescence, and three-dimensional (3D) imaging in living animals.

Phenanthrene-Fused-Quinoxaline as a Key Building Block for Highly Efficient and Stable Sensitizers in Copper-Electrolyte-Based Dye-Sensitized Solar Cells.

Dye-sensitized solar cells (DSSCs) based on CuII/I bipyridyl or phenanthroline complexes as redox shuttles have achieved very high open-circuit voltages (VOC , more than 1 V). However, their short-circuit photocurrent density (JSC ) has remained modest. Increasing the JSC is expected to extend the spectral response of sensitizers to the red or NIR region while maintaining efficient electron injection in the mesoscopic TiO2 film and fast regeneration by the CuI complex. Herein, we report two new D-A-π-A-featured sensitizers termed HY63 and HY64, which employ benzothiadiazole (BT) or phenanthrene-fused-quinoxaline (PFQ), respectively, as the auxiliary electron-withdrawing acceptor moiety. Despite their very similar energy levels and absorption onsets, HY64-based DSSCs outperform their HY63 counterparts, achieving a power conversion efficiency (PCE) of 12.5 %. PFQ is superior to BT in reducing charge recombination resulting in the near-quantitative collection of photogenerated charge carriers.