Crystallography, Charge Transfer, and Two-Photon Absorption Relations in Molecular Cocrystals for Two-Photon Excited Fluorescence Imaging.

Two-photon excited fluorescence imaging requires high-performance two-photon absorption (TPA) active materials, which are commonly intramolecular charge transfer systems prepared by traditional chemical synthesis. However, this typically needs harsh conditions and new methods are becoming crucial. In this work, based on a collaborative intermolecular charge transfer (inter-CT) strategy, three centimeter-sized organic TPA cocrystals are successfully obtained. All three cocrystals exhibit a mixed stacking arrangement, which can effectively generate inter-CT between the donor and acceptor. The ground and excited state characterizations compare their inter-CT ability: 1,2-BTC > 2D-BTC > 1D-BTC. Transient absorption spectroscopy detects TCNB•-, indicating that the TPA mechanism arises from molecular polarization caused by inter-CT. Meanwhile, 1,2-BTC exhibits the highest excited-state absorption and the longest excited-state lifetime, suggesting a stronger TPA response. First-principles calculations also confirm the presence of inter-CT interactions, and the significant parameter Δµ which can assess the TPA capability indicates that inter-CT enhances the TPA response. Besides, cocrystals also demonstrate excellent water solubility and two-photon excited fluorescence imaging capabilities. This research not only provides an effective method for synthesizing TPA crystal materials and elucidates the connection between inter-CT ability and TPA property but also successfully applies them in the fields of multi-photon fluorescence bioimaging.

PP-ISEA: An Efficient Algorithm for High-Resolution Three-Dimensional Geometry Reconstruction of Space Targets Using Limited Inverse Synthetic Aperture Radar Images.

As the variety of space targets expands, two-dimensional (2D) ISAR images prove insufficient for target recognition, necessitating the extraction of three-dimensional (3D) information. The 3D geometry reconstruction method utilizing energy accumulation of ISAR image sequence (ISEA) facilitates superior reconstruction while circumventing the laborious steps associated with factorization methods. Nevertheless, ISEA's neglect of valid information necessitates a high quantity of images and elongated operation times. This paper introduces a partitioned parallel 3D reconstruction method utilizing sorted-energy semi-accumulation with ISAR image sequences (PP-ISEA) to address these limitations. The PP-ISEA innovatively incorporates a two-step search pattern-coarse and fine-that enhances search efficiency and conserves computational resources. It introduces a novel objective function 'sorted-energy semi-accumulation' to discern genuine scatterers from spurious ones and establishes a redundant point exclusion module. Experiments on the scatterer model and simulated electromagnetic model demonstrate that the PP-ISEA reduces the minimum image requirement from ten to four for high-quality scatterer model reconstruction, thereby offering superior reconstruction quality in less time.

Effect of nanoparticle-mediated delivery of SFRP4 siRNA for treating Dupuytren disease.

Dupuytren disease (DD) is a progressive fibrous proliferative disease. It invades the palmar aponeurosis and extends to the finger fascia, eventually leading to flexion contracture of the metacarpophalangeal or interphalangeal joint. At present, surgical resection and the local injection of collagenase are the main methods for the treatment of DD, but postoperative complications and high recurrence rates often occur. Bioinformatics analysis showed that the increased expression of SFRP4 protein was closely related to the incidence of DD. Persistent and effective inhibition of SFRP4 expression may be a promising treatment for DD. We prepared SFRP4 siRNA/nanoparticle complexes (si-SFRP4) and negative siRNA/nanoparticle complexes (NC) and applied them in vitro and in vivo. Flow cytometry analysis showed that si-SFRP4 could be successfully transfected into DD cells. MTT and EdU staining assays showed that the OD values and percentage of EdU-positive cells in the si-SFRP4 group were significantly lower than those in the NC group. Scratch tests showed that the wound healing rate of the si-SFRP4 group was lower than that of the NC group, and the difference was statistically significant. The expression of SFRP4 and α-SMA protein in the si-SFRP4 group significantly decreased in both DD cells and xenografts. Compared with the NC group, the xenograft quality of the si-SFRP4 group was significantly reduced. Masson's trichrome staining showed that the collagen and fibrous cells in the si-SFRP4 group were more uniform, slender, parallel and regular. The above experimental results suggest that the proliferation and metabolism of palmar aponeurosis cells and the quality of metacarpal fascia xenografts were both significantly decreased. We speculated that nanoparticle-mediated SFRP4 siRNA can be used as a potential new method for the treatment of DD.

Spinocerebellar ataxia type 8 presents as progressive supranuclear palsy.

Spinocerebellar ataxia type 8 is a progressive neurodegenerative disease induced by expansion of CTA/CTG repeats in an untranslated region of the ATXN8/ATXN8OS gene. We report an elderly female patient presenting with rigidity, bradykinesia, ataxia and oculomotor defect at the disease onset age of 65 years old without family history, and hummingbird sign in cranial MRI, initially diagnosed as progressive supranuclear palsy (PSP). But genetic test showed that one allele of ATXN8OS gene had more than 131 CTA/CTG repeats which was a full penetrance mutant. It's possible that this is a case of PSP with an ATXN8OS gene mutation that doesn't contribute to the phenotype. Whether the ATXN8OS gene CTA/CTG repeats cause PSP phenotype needs further investigation with larger samples and pathological findings.

Creating Organic Functional Materials beyond Chemical Bond Synthesis by Organic Cocrystal Engineering.

Organic cocrystal engineering refers to two or more organic molecules stoichiometrically combined and held together by noncovalent intermolecular interactions, which differs from standard chemical synthesis involving covalent bond breakage and formation. Organic cocrystals have unique properties and offer a new strategy for creating enhanced organics. First, however, some key questions need to be addressed: How do diverse monomers affect the intermolecular interaction kinetics during cocrystallization? How do the intermolecular forces in cocrystals affect cocrystal functions? In this Perspective, the definition and advantages of organic cocrystal engineering, specifically in the construction of a reliable intermolecular interaction-stacking structure-performance relationship, are outlined. Additionally, recent developments in the field and the questions above are discussed. Finally, a brief conclusion and some hints on likely future developments are provided.

Systematic Merging of Nonfullerene Acceptor π-Extension and Tetrafluorination Strategies Affords Polymer Solar Cells with >16% Efficiency.

The end-capping group (EG) is the essential electron-withdrawing component of nonfullerene acceptors (NFAs) in bulk heterojunction (BHJ) organic solar cells (OSCs). To systematically probe the impact of two frequent EG functionalization strategies, π-extension and halogenation, in A-DAD-A type NFAs, we synthesized and characterized four such NFAs: BT-BIC, LIC, L4F, and BO-L4F. To assess the relative importance of these strategies, we contrast these NFAs with the baseline acceptors, Y5 and Y6. Up to 16.6% power conversion efficiency (PCE) in binary inverted OSCs with BT-BO-L4F combining π-extension and halogenation was achieved. When these two factors are combined, the effect on optical absorption is cumulative. Single-crystal π-π stacking distances are similar for the EG strategies of π-extension. Increasing the alkyl substituent length from BT-L4F to BT-BO-L4F significantly alters the packing motif and eliminates the EG core interactions of BT-L4F. Electronic structure computations reveal some of the largest NFA π-π electronic couplings observed to date, 103.8 meV in BT-L4F and 47.5 meV in BT-BO-L4F. Computed electronic reorganization energies, 132 and 133 meV for BT-L4F and BT-BO-L4F, respectively, are also lower than Y6 (150 meV). BHJ blends show preferential π-face-on orientation, and both fluorination and π-extension increase NFA crystallinity. Femto/nanosecond transient absorption spectroscopy (fs/nsTA) and integrated photocurrent device analysis (IPDA) indicate that π-extension modifies the phase separation to enhance film ordering and carrier mobility, while fluorination suppresses unimolecular recombination. This systematic study highlights the synergistic effects of NFA π-extension and fluorination in affording efficient OSCs and provides insights into designing next-generation materials.

Exciton Transport in Molecular Semiconductor Crystals for Spin-Optoelectronics Paradigm.

Organic semiconductors with long-range exciton diffusion length are highly desirable for optoelectronics but currently remain rare. Here, the estimated diffusion length of singlet excitons (LD ) in 2,6-diphenyl anthracene (DPA) crystals grown by solvent evaporation was shown to be up to approximately 124 nm. These crystals showed a previously unseen parallelogram morphology with layer-by-layer edge-on molecular stacking, isotropic optical waveguiding, radiation rate and non-radiation rate constants of 0.15 and 0.26 ns-1 respectively, as well as good field-effect transistor hole mobility and theoretically computed strong electronic couplings as high as 109 meV. Photoresponse experiments revealed that the photoconductivity of DPA crystals is surprisingly not related to the radiative pathway but associated with rapid exciton diffusion to the crystal surface for charge separation and carrier bimolecular recombination. Taken together, DPA was shown to be a promising semiconducting material for a new organic optoelectronics paradigm.

Effect of surgical pleth index-guided analgesia versus conventional analgesia techniques on fentanyl consumption under multimodal analgesia in laparoscopic cholecystectomy: a prospective, randomized and controlled study.

BACKGROUND: The Surgical Pleth Index (SPI) is an objective tool that can reflect nociception-antinociception balance and guide the use of intraoperative analgesics. Multimodal analgesia has been neglected in many previous studies. The aim of this study was to compare fentanyl consumption using SPI-guided analgesia versus conventional analgesia techniques under multimodal analgesia in laparoscopic cholecystectomy. METHODS: A total of 80 patients aged 18-65 years with American Society of Anaesthesiologists (ASA) grade I-II and a body mass index (BMI) of 18.5 to 30 kg/m2 who were scheduled for laparoscopic cholecystectomy under total intravenous anaesthesia from March 2020 to September 2020 were selected. Multimodal analgesia, including local infiltration of the surgical incision, nonsteroidal anti-inflammatory drugs and opioids, was adopted perioperatively. Fentanyl boluses of 1.0 µg/kg were administered to maintain the SPI value between 20 and 50 in the SPI group. By contrast, fentanyl boluses of 1.0 µg/kg were administered whenever the heart rate (HR) or mean arterial pressure (MAP) increased to 20 % above baseline or when the HR was greater than 90 beats per minute (bpm) in the control group. Preoperative and postoperative blood glucose, plasma cortisol and interleukin-6 (IL-6) levels were evaluated. Intraoperative haemodynamic events and propofol and fentanyl doses were noted. The extubation time, postoperative visual analogue scale (VAS) score, use of remedial analgesics and opioid-related adverse reactions were recorded. RESULTS: In total, 18 of 80 patients withdrew for various reasons, and data from 62 patients were finally analysed. Intraoperative fentanyl consumption was significantly lower in the SPI group than in the control group (177.1 ± 65.9 vs. 213.5 ± 47.5, P = 0.016). The postoperative extubation time was shorter in the SPI group than in the control group (16.1 ± 5.2 vs. 22.1 ± 6.3, P < 0.001). Preoperative and postoperative blood glucose, plasma cortisol and IL-6 levels, intraoperative haemodynamic changes, postoperative VAS scores, remedial analgesic consumption and opioid-related adverse reactions were comparable in the two groups. CONCLUSIONS: Lower doses of fentanyl are required intraoperatively with shorter extubation times when SPI is used to guide intraoperative analgesia compared to conventional analgesia techniques under multimodal analgesia in laparoscopic cholecystectomy. TRIAL REGISTRATION: Chictr.org.cn ChiCTR2000030145 . Retrospectively Registered (Date of registration: February 24, 2020).

Closely packed, low reorganization energy π-extended postfullerene acceptors for efficient polymer solar cells.

New organic semiconductors are essential for developing inexpensive, high-efficiency, solution-processable polymer solar cells (PSCs). PSC photoactive layers are typically fabricated by film-casting a donor polymer and a fullerene acceptor blend, with ensuing solvent evaporation and phase separation creating discrete conduits for photogenerated holes and electrons. Until recently, n-type fullerene acceptors dominated the PSC literature; however, indacenodithienothiophene (IDTT)-based acceptors have recently enabled remarkable PSC performance metrics, for reasons that are not entirely obvious. We report two isomeric IDTT-based acceptors 3,9-bis(2-methylene-(3-(1,1-dicyanomethylene)-benz-(5, 6)indanone))-5,5,11,11-tetrakis(4-nonylphenyl)-dithieno[2,3-d:2',3'-d']-s-indaceno[1,2-b:5,6-b']di-thiophene (ITN-C9) and 3,9-bis(2-methylene-(3-(1,1-dicyanomethylene)-benz(6,7)indanone))-5,5,11,11-tetrakis(4-nonylphenyl)-dithieno[2,3-d:2',3'-d']-s-indaceno[1,2-b:5,6-b']dithiophene (ITzN-C9) that shed light on the exceptional IDTT properties vis-à-vis fullerenes. The neat acceptors and blends with fluoropolymer donor poly{[4,8-bis[5-(2- ethylhexyl)-4-fluoro-2-thienyl]benzo[1,2-b:4,5-b']dithiophene2,6-diyl]-alt-[2,5-thiophenediyl[5,7-bis(2-ethylhexyl)-4,8-dioxo4H,8H-benzo[1,2-c:4,5-c']dithiophene-1,3-diyl]]} (PBDB-TF) are investigated by optical spectroscopy, cyclic voltammetry, thermogravimetric analysis, differential scanning calorimetry, single-crystal X-ray diffraction, photovoltaic response, space-charge-limited current transport, atomic force microscopy, grazing incidence wide-angle X-ray scattering, and density functional theory-level quantum chemical analysis. The data reveal that ITN-C9 and ITzN-C9 organize such that the lowest unoccupied molecular orbital-rich end groups have intermolecular π-π distances as close as 3.31(1) Å, with electronic coupling integrals as large as 38 meV, and internal reorganization energies as small as 0.133 eV, comparable to or superior to those in fullerenes. ITN-C9 and ITzN-C9 have broad solar-relevant optical absorption, and, when blended with PBDB-TF, afford devices with power conversion efficiencies near 10%. Performance differences between ITN-C9 and ITzN-C9 are understandable in terms of molecular and electronic structure distinctions via the influences on molecular packing and orientation with respect to the electrode.

Cocrystal Engineering: Toward Solution-Processed Near-Infrared 2D Organic Cocrystals for Broadband Photodetection.

Large-area 2D cocrystals with strong near-infrared (NIR) absorption have been designed and prepared. Driven by the intermolecular charge-transfer (CT) interactions, zinc tetraphenylporphyrin (donor) and C60 (acceptor) self-assemble into a NIR cocrystal with absorption wavelength up to 1080 nm. By tailoring the growth solvents and processes, the cocrystal morphologies can be tuned from 1D nanowires, 2D nanosheets to large-area 2D cocrystal films with length reaching several millimeters. Owing to the highly ordered donor-acceptor arrangement, the CT absorption in the 2D cocrystals is enhanced and is comparable to singlet absorption. The uniform 2D cocrystals, with enhanced CT absorption in the NIR region, displays a high responsivity of 2424 mA W-1 to NIR light and a fast response time of 0.6 s. The excellent device performance is attributed to the generation of long-lived free charge carriers as revealed by transient absorption spectroscopy and optimization of device configuration.

Crystallography, Morphology, Electronic Structure, and Transport in Non-Fullerene/Non-Indacenodithienothiophene Polymer:Y6 Solar Cells.

Emerging nonfullerene acceptors (NFAs) with crystalline domains enable high-performance bulk heterojunction (BHJ) solar cells. Thermal annealing is known to enhance the BHJ photoactive layer morphology and performance. However, the microscopic mechanism of annealing-induced performance enhancement is poorly understood in emerging NFAs, especially regarding competing factors. Here, optimized thermal annealing of model system PBDB-TF:Y6 (Y6 = 2,2'-((2Z,2'Z)-((12,13-bis(2-ethylhexyl)-3,9-diundecyl-12,13-dihydro-[1,2,5]thiadiazolo[3,4-e]thieno[2″,3'':4',5']thieno[2',3':4,5]pyrrolo[3,2-g]thieno[2',3':4,5]-thieno[3,2-b]indole-2,10-diyl)bis(methanylylidene))bis(5,6-difluoro-3-oxo-2,3-dihydro-1H-indene-2,1-diylidene))dimalononitrile) decreases the open circuit voltage (VOC) but increases the short circuit current (JSC) and fill factor (FF) such that the resulting power conversion efficiency (PCE) increases from 14 to 15% in the ambient environment. Here we systematically investigate these thermal annealing effects through in-depth characterizations of carrier mobility, film morphology, charge photogeneration, and recombination using SCLC, GIXRD, AFM, XPS, NEXAFS, R-SoXS, TEM, STEM, fs/ns TA spectroscopy, 2DES, and impedance spectroscopy. Surprisingly, thermal annealing does not alter the film crystallinity, R-SoXS characteristic size scale, relative average phase purity, or TEM-imaged phase separation but rather facilitates Y6 migration to the BHJ film top surface, changes the PBDB-TF/Y6 vertical phase separation and intermixing, and reduces the bottom surface roughness. While these morphology changes increase bimolecular recombination (BR) and lower the free charge (FC) yield, they also increase the average electron and hole mobility by at least 2-fold. Importantly, the increased µh dominates and underlies the increased FF and PCE. Single-crystal X-ray diffraction reveals that Y6 molecules cofacially pack via their end groups/cores, with the shortest π-π distance as close as 3.34 Å, clarifying out-of-plane π-face-on molecular orientation in the nanocrystalline BHJ domains. DFT analysis of Y6 crystals reveals hole/electron reorganization energies of as low as 160/150 meV, large intermolecular electronic coupling integrals of 12.1-37.9 meV rationalizing the 3D electron transport, and relatively high µe of 10-4 cm2 V-1 s-1. Taken together, this work clarifies the richness of thermal annealing effects in high-efficiency NFA solar cells and tasks for future materials design.

Efficacy of early antiretroviral therapy 36 hours after HIV infection in one blood donor.

BACKGROUND: Discrepancies can occur with the use of clinical human immunodeficiency virus (HIV) diagnostic reagents for the HIV window period (WP; time from RNA to antibody detection by diagnostic or blood screening assays). Antiretroviral therapy (ART) during acute HIV infection can impact HIV-specific antibodies, antigens, and DNA/RNA detection. In this study, an HIV WP blood donor who initiated ART was monitored, evaluating the immunological and nucleic acid testing (NAT) results for early ART and discussing the potential effects on blood safety. STUDY DESIGN AND METHODS: This was a follow-up study of a HIV WP donor detected 36 hours after high-risk sexual behavior, who was subsequently treated with ART. Immunological and NAT methods were comparatively analyzed. RESULTS: The 4th generation HIV serologic assays were positive at Day 11, and the 3rd generation domestic anti-HIV assay was positive at Day 33. Individual donation (ID) NAT and minipool (MP) NAT of six samples were reactive, but 12-sample MP-NAT was nonreactive. ART resulted in a slow decline of HIV RNA, but HIV DNA was still detected on Day 757. CONCLUSION: After ART, ID-NAT was more sensitive than MP-NAT or serologic detection; however, HIV DNA detection was more sensitive, with DNA but not RNA persistently detectable.

Comprehensive analysis of hepatitis B virus infections in blood donors in southern China that are surface antigen positive but nucleic acid testing negative.

BACKGROUND: Hepatitis B virus (HBV) infection is one of the major concerns for the safety of blood transfusion in high-prevalent countries such as in China. Prior studies outside of China have shown hepatitis B surface antigen (HBsAg) false-reactive rate of 0.02% to 0.04%. Similarly, false-negative HBsAg and HBV DNA results may occur in infected donors. Our study analyzed HBsAg enzyme-linked immunosorbent assay (ELISA)-reactive but NAT-negative donations in Shenzhen Blood Center, China. STUDY DESIGN AND METHODS: HBsAg ELISA-positive/NAT-negative plasma samples identified from screening 101,025 donations during 2017-2018 were analyzed by molecular and serologic tests including neutralization, chemiluminescence immunoassays, and various HBV DNA amplification assays. Molecular characterizations of HBsAg-positive/NAT-negative samples were determined by quantitative polymerase chain reaction (qPCR) and nested PCR amplification of the basic core and precore promotor regions (295 base pairs) and HBsAg (S) region (496 base pairs). RESULTS: Screening of 101,025 eligible blood donations identified 157 (0.16%, 95% confidence interval, 0.13%-0.18%) HBsAg ELISA-positive/NAT-negative plasma samples; of those, 71 (45.2%) were HBsAg confirmed positive by further HBsAg testing and DNA positive by molecular tests with increased sensitivity. Of the 71, all but one was antibody to hepatitis B core antigen reactive without antibody to hepatitis B surface antigen, yielding one recent (window-period) HBV infection. Of the remaining donations, 80 (51%) were not considered as HBV-infected donors, and 6 (3.8%) were interpreted as indeterminate since HBsAg results were discordant with unconfirmed HBV DNA results. In the 71 confirmed positives, HBsAg levels ranged from 0.05 to 400 IU/mL and HBV DNA from 6 to 2654 IU/mL; however, the correlation between the two was weak (R2 = 0.24). CONCLUSION: Fewer than half of HBsAg ELISA-positive/NAT-negative samples were confirmed as HBsAg positive. Our study demonstrates that in highly HBV-endemic countries, assays with high sensitivity and specificity may be required.

Oxide-Polymer Heterojunction Diodes with a Nanoscopic Phase-Separated Insulating Layer.

Organic semiconductor-insulator blend films are widely explored for high-performance electronic devices enabled by unique phase-separation and self-assembly phenomena at key device interfaces. Here we report the first demonstration of high-performance hybrid diodes based on p- n junctions formed by a p-type poly(3-hexylthiophene) (P3HT)-poly(methyl methacrylate) (PMMA) blend and n-type indium-gallium-zinc oxide (IGZO). The thin film morphology, microstructure, and vertical phase-separation behavior of the P3HT films with varying contents of PMMA are systematically analyzed. Microstructural and charge transport evaluation indicates that the polymer insulator component positively impacts the morphology, molecular orientation, and effective conjugation length of the P3HT films, thereby enhancing the heterojunction performance. Furthermore, the data suggest that PMMA phase segregation creates a continuous nanoscopic interlayer between the P3HT and IGZO layers, playing an important role in enhancing diode performance. Thus, the diode based on an optimal P3HT-PMMA blend exhibits a remarkable 10-fold increase in forward current versus that of a neat P3HT diode, yielding an ideality factor value as low as 2.5, and a moderate effective barrier height with an excellent rectification ratio. These results offer a new approach to simplified manufacturing of low-cost, large-area hybrid inorganic-organic electronics technologies.

Efficiency and kinetics of conventional pollutants and tetracyclines removal in integrated vertical-flow constructed wetlands enhanced by aeration.

The integrated vertical-flow constructed wetland (IVCW) is considered as a potential alternative for domestic wastewater treatment of towns and small cities. Oxygen supply is the main limitation of pollutants removal in IVCWs. In the present study, a field experiment was conducted to evaluate the capacity and kinetics of pollutants removal in IVCWs with/without artificial aeration. Two IVCWs constructed with Canna indica and Phragmites australis were running in continuous flow to remove high concentrations of conventional pollutants and low concentrations of tetracyclines (TETs), which are at similar levels of domestic wastewater. The results showed that IVCWs had a good performance on COD, phosphorus, and TETs with removal efficiencies over 80%, 64%, and 75%, respectively, with a hydraulic retention time (HRT) of 3.0 d. However, the removal of nitrogen was limited, showing as TN removal efficiency of about 30%. The IVCW with Phragmites australis had a higher removal efficiency and rate. A kinetics based on Monod Equation and solved with Matlab 2018a could describe the degradation of conventional pollutants. Artificial aeration improved the oxygen supply and remarkably raised the removal capacity for COD, N, and P in IVCWs. The q1/2 values, which was defined as the average removal loading before half of the pollutants was removed and represented the removal capacity without limitation of pollutants concentration, were increased by 5-30 times after aeration. In conclusion, IVCWs could remove conventional pollutants and TETs simultaneously showing a great potential in domestic wastewater treatment. Artificial aeration enhanced removal capacity of IVCWs on conventional pollutants while showed little influence on TETs.

Fluorination Effects on Indacenodithienothiophene Acceptor Packing and Electronic Structure, End-Group Redistribution, and Solar Cell Photovoltaic Response.

Indacenodithienothiophene (IDTT)-based postfullerene electron acceptors, such as ITIC (2,2'-[[6,6,12,12-tetrakis(4-hexylphenyl)-6,12-dihydrodithieno[2,3- d:2',3'- d']-s-indaceno[1,2- b:5,6- b']dithiophene-2,8-diyl]-bis[methylidyne(3-oxo-1 H-indene-2,1(3 H)-diylidene)]]bis[propanedinitrile]), have become synonymous with high power conversion efficiencies (PCEs) in bulk heterojunction (BHJ) polymer solar cells (PSCs). Here we systematically investigate the influence of end-group fluorination density and positioning on the physicochemical properties, single-crystal packing, end-group redistribution propensity, and BHJ photovoltaic performance of a series of ITIC variants, ITIC- nF ( n = 0, 2, 3, 4, and 6). Increasing n from 0 → 6 contracts the optical bandgap, but only marginally lowers the LUMO for n > 4. This yields enhanced photovoltaic short-circuit current density and good open-circuit voltage, so that ITIC-6F achieves the highest PCE of the series, approaching 12% in blends with the PBDB-TF donor polymer. Single-crystal diffraction reveals that the ITIC- nF molecules cofacially interleave with ITIC-6F having the shortest π-π distance of 3.28 Å. This feature together with ZINDO-level computed intermolecular electronic coupling integrals as high as 57 meV, and B3LYP/DZP-level reorganization energies as low as 147 meV, rival or surpass the corresponding values for fullerenes, ITIC-0F, and ITIC-4F, and track a positive correlation between the ITIC- nF space-charge limited electron mobility and n. Finally, a heretofore unrecognized solution-phase redistribution process between the 2-(3-oxo-indan-1-ylidene)-malononitrile-derived end-groups (EGs) of IDTT-based NFAs, i.e., EG1-IDTT-EG1 + EG2-IDTT-EG2 ⇌ 2 EG1-IDTT-EG2, with implications for the entire ITIC PSC field, is identified and mechanistically characterized, and the effects on PSC performance are assessed.

Nearly half of Ultrio plus NAT non-discriminated reactive blood donors were identified as occult HBV infection in South China.

BACKGROUND: Blood donor plasma samples were detected by the Ultrio Plus NAT system for HBV, HCV and HIV-1 in Shenzhen blood center, China. Reactive samples underwent further discriminatory testing of a single virus by the same methodology. A large number of cases of non-discriminated reactive (NDR) donors were found, leaving potential risk of transmitting HBV if not deferrals. This study identified those non-discriminated samples. METHODS: The NDR plasma samples from blood donation screening were detected and classified by additional molecular and serological tests. Molecular characterizations of DNA+ NDR were determined by sequencing analysis. RESULTS: A number of 259 (0.21%) NDR plasma samples from screening of 123,280 eligible blood donors were detected, which presented a higher rate (91.1%) of anti-HBc reactivity and nearly half (46.7%) of HBV DNA+ that classified as occult HBV infection (OBI). Most OBI strains were wild-type HBV, but some substitutions V168A, S174 N, V177A, Q129R/L/H, G145A/R in S region of genotype B (OBIB) and T47K/V/A, P49H/L, Q101R/H/K, S174 N, L175S, V177A, T118 M/R/K, G145R/A/K/E, R160K/N in S region of genotype C (OBIC) strains were identified in high frequency. CONCLUSION: Nearly half of NDR blood samples were identified as OBI, in which a number of important mutations were detected. NDR donation might have potential risk for HBV transmission, but need to be further investigated.

Synergistic Boron Doping of Semiconductor and Dielectric Layers for High-Performance Metal Oxide Transistors: Interplay of Experiment and Theory.

We report the results of a study to enhance metal oxide (MO) thin-film transistor (TFT) performance by doping both the semiconductor (In2O3) and gate dielectric (Al2O3) layers with boron (yielding IBO and ABO, respectively) and provide the first quantitative analysis of how B doping affects charge transport in these MO dielectric and semiconducting matrices. The impact of 1-9 atom % B doping on MO microstructure, morphology, oxygen defects, charge transport, and dielectric properties is analyzed together, in detail, by complementary experimental (microstructural, electrical) and theoretical (ab initio MD, DFT) methods. The results indicate that B doping frustrates In2O3 crystallization while suppressing defects responsible for electron trapping and carrier generation. In the adjacent Al2O3 dielectric, B doping increases the dielectric constant and refractive index while reducing leakage currents. Furthermore, optimized solution-processed TFTs combining IBO channels with 6 atom % B and ABO dielectrics with 10 atom % B exhibit field effect mobilities as high as 11 cm2 V-1 s-1, current on/off ratios >105, threshold voltages = 0.6 V, and superior bias stress durability.

Molecular cocrystals: design, charge-transfer and optoelectronic functionality.

Organic cocrystals, formed by a combination of electron-rich donors and electron-poor acceptors, play an important role in tailoring the optoelectronic properties of molecular materials. Charge transfer interactions in cocrystals not only endow them with an ordered three-dimensional (3D) supramolecular network in different constituent units, but also render them ideal scaffolds to control the intermolecular interactions in multicomponent solids. In this perspective, we firstly introduce preparation methods, molecular packing modes and charge transfer in organic cocrystals. Then, we focus on the novel and promising optoelectronic properties of organic cocrystals based on charge transfer interactions. Finally, we briefly discuss the outlook for the future development of these multicomponent crystalline materials.

Cocrystals Strategy towards Materials for Near-Infrared Photothermal Conversion and Imaging.

A cocrystal strategy with a simple preparation process is developed to prepare novel materials for near-infrared photothermal (PT) conversion and imaging. DBTTF and TCNB are selected as electron donor (D) and electron acceptor (A) to self-assemble into new cocrystals through non-covalent interactions. The strong D-A interaction leads to a narrow band gap with NIR absorption and that both the ground state and lowest-lying excited state are charge transfer states. Under the NIR laser illumination, the temperature of the cocrystal sharply increases in a short time with high PT conversion efficiency (η=18.8 %), which is due to the active non-radiative pathways and inhibition of radiative transition process, as revealed by femtosecond transient absorption spectroscopy. This is the first PT conversion cocrystal, which not only provides insights for the development of novel PT materials, but also paves the way of designing functional materials with appealing applications.