Characterization of myeloid signature genes for predicting prognosis and immune landscape in Ewing sarcoma.

Myeloid cells as a highly heterogeneous subpopulation of the tumor microenvironment (TME) are intimately associated with tumor development. Ewing sarcoma (EWS) is characterized by abundant myeloid cell infiltration in the TME. However, the correlation between myeloid signature genes (MSGs) and the prognosis of EWS patients was unclear. In this research, we synthetically characterized the expression of MSGs in a training cohort and classified EWS patients into two subtypes. Immune cell infiltration analysis revealed that MSGs subtypes correlated closely with different immune statuses. Furthermore, a three-gene prognostic model (CTSD, SIRPA, and FN1) was constructed by univariate, LASSO, and multivariate Cox analysis, and it showed excellent prognostic accuracy in EWS patients. We also developed a nomogram for better predicting the long-term survival of EWS. Functional enrichment analysis showed immune-related pathways were distinctly different in the high- and low-risk groups. Further analysis revealed that patients in the high-risk group were tightly associated with an immunosuppressive microenvironment. Finally, we validated the expression of these candidate genes by Western blot (WB), qPCR, and immunohistochemistry (IHC) analysis. To sum up, our study identified that the MSGs model was strongly linked to prognostic prediction and immune infiltration in EWS patients, providing novel insights into the clinical treatment and management of EWS patients.

Blood transcriptome and machine learning identified the crosstalk between COVID-19 and fibromyalgia: a preliminary study.

OBJECTIVES: The COVID-19 pandemic caused by SARS-CoV-2 has seriously threatened the human health. Growing evidence shows that COVID-19 patients who recovery will persist with symptoms of fibromyalgia (FM). However, the common molecular mechanism between COVID-19 and FM remains unclear. METHODS: We obtained blood transcriptome data of COVID-19 (GSE177477) and FM (GSE67311) patients from GEO database, respectively. Subsequently, we applied Limma, GSEA, Wikipathway, KEGG, GO, and machine learning analysis to confirm the common pathogenesis between COVID-19 and FM, and screened key genes for the diagnosis of COVID-19 related FM. RESULTS: A total of 2505 differentially expressed genes (DEGs) were identified in the FM dataset. Functional enrichment analysis revealed that the occurrence of FM was intimately associated with viral infection. Moreover, WGCNA analysis identified 243 genes firmly associated with the pathological process of COVID-19. Subsequently, 50 common genes were screened between COVID-19 and FM, and functional enrichment analysis of these common genes primarily involved in immunerelated pathways. Among these common genes, 3 key genes were recognised by machine learning for the diagnosis of COVID-19 related FM. We also developed a diagnostic nomogram to predict the risk of FM occurrence which showed excellent predictive performance. Finally, we found that these 3 key genes were closely relevant to immune cells and screened potential drugs that interacted with the key genes. CONCLUSIONS: Our study revealed the bridge role of immune dysregulation between COVID-19 and fibromyalgia, and screened underlying biomarkers to provide new clues for further clinical research.

Photobiomodulation promotes spinal cord injury repair by inhibiting macrophage polarization through lncRNA TUG1-miR-1192/TLR3 axis.

BACKGROUND: Secondary spinal cord injury (SCI) often causes the aggravation of inflammatory reaction and nerve injury, which affects the recovery of motor function. Bone-marrow-derived macrophages (BMDMs) were recruited to the injured area after SCI, and the M1 polarization is the key process for inducing inflammatory response and neuronal apoptosis. We previously showed that photobiomodulation (PBM) can inhibit the polarization of M1 phenotype of BMDMs and reduce inflammation, but the underlying mechanisms are unclear. The purpose of this study is to explore the potential target and mechanism of PBM in treating SCI. METHODS: Transcriptome sequencing and bioinformatics analysis showed that long noncoding RNA taurine upregulated gene 1 (lncRNA TUG1) was a potential target of PBM. The expression and specific mechanism of lncRNA TUG1 were detected by qPCR, immunofluorescence, flow cytometry, western blotting, fluorescence in situ hybridization, and luciferase assay. The Basso mouse scale (BMS) and gait analysis were used to evaluate the recovery of motor function in mice. RESULTS: Results showed that lncRNA TUG1 may be a potential target of PBM, regulating the polarization of BMDMs, inflammatory response, and the axial growth of DRG. Mechanistically, TUG1 competed with TLR3 for binding to miR-1192 and attenuated the inhibitory effect of miR-1192 on TLR3. This effect protected TLR3 from degradation, enabling the high expression of TLR3, which promoted the activation of downstream NF-κB signal and the release of inflammatory cytokines. In vivo, PBM treatment could reduce the expression of TUG1, TLR3, and inflammatory cytokines and promoted nerve survival and motor function recovery in SCI mice. CONCLUSIONS: Our study clarified that the lncRNA TUG1/miR-1192/TLR3 axis is an important pathway for PBM to inhibit M1 macrophage polarization and inflammation, which provides theoretical support for its clinical application in patients with SCI.

A Field Study Implementing New Monitoring Technology for Roof Caving and Systematic Monitoring for Gob-Side Entry Retaining via Roof Cutting in Underground Coal Mining.

The longwall mining method with gob-side entry retaining via roof cutting is a new underground coal mining method which has the characteristics of a high resource recovery ratio and environmental friendliness. Due to the complexity of this method, the research method of case-based dynamic on-site monitoring, analysis, adjustment, and optimization is usually adopted. Based on a roadway retaining via roof cutting project, in addition to the traditional indirect monitoring method of hydraulic support pressure, this study innovatively establishes a direct monitoring method for roof caving by monitoring the gangue pressure in the goaf, which provides data for the roof cutting effect and offers a new method for studying the overlying strata movement. In the project, a comprehensive monitoring and analysis system was established, including gangue pressure, cable bolt stress, bracket pressure, roadway deformation, and roof separation, which was used to dynamically analyze the effect of roof cutting and optimize the support design. The results show that the pressure of the hydraulic support close to the roof cutting is low, indicating that roof cutting is favorable in the roadway retaining mining method. The roadway deformation in the advanced abutment pressure area of the working face is small. The mining-induced stress caused by the collapse and compaction of the overlying strata in the goaf is the dominant factor affecting the effect of roadway retaining, especially in the 50-100 m range behind the working face, where the dynamic load causes high bearing capacity of the support elements, large roadway convergence, and roof separation. Temporary support and supplementary reinforcement should be added when necessary. The monitoring system presented in this study is highly comprehensive, simple, reliable, and low in cost, providing a reference for roof cutting roadway retaining projects and roof caving-related studies.

A Bionic Testbed for Cardiac Ablation Tools.

Bionic-engineered tissues have been proposed for testing the performance of cardiovascular medical devices and predicting clinical outcomes ex vivo. Progress has been made in the development of compliant electronics that are capable of monitoring treatment parameters and being coupled to engineered tissues; however, the scale of most engineered tissues is too small to accommodate the size of clinical-grade medical devices. Here, we show substantial progress toward bionic tissues for evaluating cardiac ablation tools by generating a centimeter-scale human cardiac disk and coupling it to a hydrogel-based soft-pressure sensor. The cardiac tissue with contiguous electromechanical function was made possible by our recently established method to 3D bioprint human pluripotent stem cells in an extracellular matrix-based bioink that allows for in situ cell expansion prior to cardiac differentiation. The pressure sensor described here utilized electrical impedance tomography to enable the real-time spatiotemporal mapping of pressure distribution. A cryoablation tip catheter was applied to the composite bionic tissues with varied pressure. We found a close correlation between the cell response to ablation and the applied pressure. Under some conditions, cardiomyocytes could survive in the ablated region with more rounded morphology compared to the unablated controls, and connectivity was disrupted. This is the first known functional characterization of living human cardiomyocytes following an ablation procedure that suggests several mechanisms by which arrhythmia might redevelop following an ablation. Thus, bionic-engineered testbeds of this type can be indicators of tissue health and function and provide unique insight into human cell responses to ablative interventions.

Photobiomodulation inhibits the activation of neurotoxic microglia and astrocytes by inhibiting Lcn2/JAK2-STAT3 crosstalk after spinal cord injury in male rats.

BACKGROUND: Neurotoxic microglia and astrocytes begin to activate and participate in pathological processes after spinal cord injury (SCI), subsequently causing severe secondary damage and affecting tissue repair. We have previously reported that photobiomodulation (PBM) can promote functional recovery by reducing neuroinflammation after SCI, but little is known about the underlying mechanism. Therefore, we aimed to investigate whether PBM ameliorates neuroinflammation by modulating the activation of microglia and astrocytes after SCI. METHODS: Male Sprague-Dawley rats were randomly divided into three groups: a sham control group, an SCI + vehicle group and an SCI + PBM group. PBM was performed for two consecutive weeks after clip-compression SCI models were established. The activation of neurotoxic microglia and astrocytes, the level of tissue apoptosis, the number of motor neurons and the recovery of motor function were evaluated at different days post-injury (1, 3, 7, 14, and 28 days post-injury, dpi). Lipocalin 2 (Lcn2) and Janus kinase-2 (JAK2)-signal transducer and activator of transcription-3 (STAT3) signaling were regarded as potential targets by which PBM affected neurotoxic microglia and astrocytes. In in vitro experiments, primary microglia and astrocytes were irradiated with PBM and cotreated with cucurbitacin I (a JAK2-STAT3 pathway inhibitor), an adenovirus (shRNA-Lcn2) and recombinant Lcn2 protein. RESULTS: PBM promoted the recovery of motor function, inhibited the activation of neurotoxic microglia and astrocytes, alleviated neuroinflammation and tissue apoptosis, and increased the number of neurons retained after SCI. The upregulation of Lcn2 and the activation of the JAK2-STAT3 pathway after SCI were suppressed by PBM. In vitro experiments also showed that Lcn2 and JAK2-STAT3 were mutually promoted and that PBM interfered with this interaction, inhibiting the activation of microglia and astrocytes. CONCLUSION: Lcn2/JAK2-STAT3 crosstalk is involved in the activation of neurotoxic microglia and astrocytes after SCI, and this process can be suppressed by PBM.

Microfluidics-Assisted Assembly of Injectable Photonic Hydrogels toward Reflective Cooling.

Development of fast curing and easy modeling of colloidal photonic crystals is highly desirable for various applications. Here, a novel type of injectable photonic hydrogel (IPH) is proposed to achieve self-healable structural color by integrating microfluidics-derived photonic supraballs with supramolecular hydrogels. The supramolecular hydrogel is engineered via incorporating ß-cyclodextrin/poly(2-hydroxypropyl acrylate-co-N-vinylimidazole) (CD/poly(HPA-co-VI)) with methacrylated gelatin (GelMA), and serves as a scaffold for colloidal crystal arrays. The photonic supraballs derived from the microfluidics techniques, exhibit excellent compatibility with the hydrogel scaffolds, leading to enhanced assembly efficiency. By virtue of hydrogen bonds and host-guest interactions, a series of self-healable photonic hydrogels (linear, planar, and spiral assemblies) can be facilely assembled. It is demonstrated that the spherical symmetry of the photonic supraballs endows them with identical optical responses independent of viewing angles. In addition, by taking the advantage of angle independent spectrum characteristics, the IPH presents beneficial effects in reflective cooling, which can achieve up to 17.4 °C in passive solar reflective cooling. The strategy represents an easy-to-perform platform for the construction of IPH, providing novel insights into macroscopic self-assembly toward thermal management applications.

Rapid and Large-Scale Production of Multi-Fluorescence Carbon Dots by a Magnetic Hyperthermia Method.

The intrinsic low yield of carbon dots (CDs) is a barrier that limits practical application. Now, a magnetic hyperthermia (MHT) method is used to synthesize fluorescent CDs on a large scale (up to 85 g) in one hour (yield ca. 60 %). The reaction process is intensified by MHT since the efficient heating system enhances the energy transfer. CDs with blue, green, and yellow luminescence are synthesized by using carbamide and citrate with three different cations (Zn2+ , Na+ , K+ ), respectively. The CDs exhibit bright fluorescence under UV light and show excellent monodispersity and solubility in water. The alternation of photoluminescence (PL) emissions of these CDs is probably due to the difference in particle sizes and surface state. A bar coating technique is used to construct large-area emissive polymer/CDs films. CDs can insert themselves into the polymer chains by hydrogen bonding and electrostatic interactions. Wound healing efficiency can be enhanced by the Zn-CDs/PCL nanofibrous scaffold.

Hydrophobic Poly(tert-butyl acrylate) Photonic Crystals towards Robust Energy-Saving Performance.

Photonic crystals (PCs) have been widely applied in optical, energy, and biological fields owing to their periodic crystal structure. However, the major challenges are easy cracking and poor structural color, seriously hindering their practical applications. Now, hydrophobic poly(tert-butyl acrylate) (P(t-BA)) PCs have been developed with relatively lower glass transition temperature (Tg ), large crack-free area, excellent hydrophobic properties, and brilliant structure color. This method based on hydrophobic groups (tertiary butyl groups) provides a reference for designing new kinds of PCs via the monomers with relatively lower Tg . Moreover, the P(t-BA) PCs film were applied as the photoluminescence (PL) enhanced film to enhance the PL intensity of CdSe@ZnS QDs by 10-fold in a liquid-crystal display (LCD) device. The new-type hydrophobic force assembled PCs may open an innovative avenue toward new-generation energy-saving devices.

A mechanistic study of silica-etching by hot water.

The etching of colloidal silica by hot water provides a green chemistry method for the preparation of mesoporous silica. Nevertheless, the reaction mechanism of this etching process has not been elucidated and its reproducibility is often questionable, which has hindered its widespread application in the preparation of mesoporous silica materials. Herein, we present a systematic study on the hot-water etching of sol-gel derived silica shells coated on α-Fe2O3 particles. Transmission electron microscopy and infrared spectroscopy studies provide substantial evidence that colloidal silica with low hydrolysis and condensation degrees (or aging degrees) is preferentially etched by hot water. More importantly, we show that the aging degree of silica shells, which determines the etching rate, can be precisely tuned by controlling the sol-gel preparation time and the storage time in room-temperature water prior to hot-water etching. These results provide novel insights into the physicochemical properties of sol-gel derived colloidal silica and the mechanistic understanding of the reaction kinetics of silica etching by hot water.

Diallyl trisulfides, a natural histone deacetylase inhibitor, attenuate HIF-1α synthesis, and decreases breast cancer metastasis.

Intratumoral hypoxia promotes the distant metastasis of cancer subclones. The clinical expression level of hypoxia-inducible factor-1α (HIF-1α) reflects the prognosis of a variety of cancers, especially breast cancer. Histone deacetylase (HDAC) inhibitors can target HIF-1α protein due to von Hippel-Lindau (VHL) protein-dependent degradation. Dietary organosulfur compounds, such as those in garlic, have been reported as HDAC inhibitors. The effects of diallyl sulfide (DAS), diallyl disulfide (DADS), and diallyl trisulfide (DATS) on the ratio of firefly/Renilla luciferase activity in hypoxic MDA-MB-231 cells were determined. The mRNA expressions of HIF-1α target genes ANGPTL4, LOXL4, and LOX in hypoxic MDA-MB-231 cells were significantly down-regulated by DATS. DATS attenuated the metastatic potential of MDA-MB-231 cells in hypoxia-induced embryonic zebrafish, xenograft, and orthotopic tumors. Endothelial cell-cancer cell adhesion, wound healing, transwell, and tube formation assays showed that DATS dose-dependently inhibited the migration and angiogenesis of MDA-MB-231 cells in vitro. The expressions of L1CAM, VEGF-A, and EMT-related proteins (Slug, Snail, MMP-2) were inhibited by DATS. DATS dose-dependently inhibited HIF-1α transcriptional activity and hypoxia-induced hematogenous metastasis of MDA-MB-231 cells. It reduced the protein expression of HIF-1α, which did not involve inhibition of HIF-1α mRNA expression or ubiquitin proteasome degradation. Efficient inhibition of HIF-1α expression was required for DATS to resist breast cancer.

Cryptotanshinone, a novel tumor angiogenesis inhibitor, destabilizes tumor necrosis factor-α mRNA via decreasing nuclear-cytoplasmic translocation of RNA-binding protein HuR.

Cryptotanshinone (CT), one major lipophilic component isolated from Salvia miltiorrhiza Bunge, has shown to possess chemopreventive properties against various types of cancer cells. In this study, CT was shown to be a potent anti-angiogenic agent in zebrafish, and mouse models and could limit tumor growth by inhibiting tumor angiogenesis. We further found that CT could inhibit the proliferation, migration, angiogenic sprouting, and tube formation of HUVECs. In addition, we demonstrated that CT could lower the level of TNF-α due to the destabilization of TNF-α mRNA, which associated with regulating 3'-untranslated region (3'-UTR) of TNF-α and preventing the translocation of RNA binding protein, HuR, from the nucleus to the cytoplasm. Moreover, the underlying mechanism responsible for the regulation in angiogenesis by CT was partially related to the suppression of NF-κB, and STAT3 activity. Based on the abilities of CT in targeting tumor cells, inhibiting angiogenesis, and destroying tumor vasculature, CT is worthy of further investigation for preventive, and therapeutic purposes in cancer. © 2015 Wiley Periodicals, Inc.

Holothurian glycosaminoglycan inhibits metastasis via inhibition of P-selectin in B16F10 melanoma cells.

P-selectin-mediated tumor cell adhesion to platelets is a well-established stage in the process of tumor metastasis. Through computerized structural analysis, we found a marine-derived polysaccharide, holothurian glycosaminoglycan (hGAG), behaved as a ligand-competitive inhibitor of P-selectin, indicating its potential to disrupt the binding of P-selectin to cell surface receptor and activation of downstream regulators of tumor cell migration. Our experimental data demonstrated that hGAG significantly inhibited P-selectin-mediated adhesion of tumor cells to platelets and tumor cell migration in vitro and reduced subsequent pulmonary metastasis in vivo. Furthermore, abrogation of the P-selectin-mediated adhesion of tumor cells led to down-regulation of protein levels of integrins, FAK and MMP-2/9 in B16F10 cells, which is a crucial molecular mechanism of hGAG to inhibit tumor metastasis. In conclusion, hGAG has emerged as a novel anti-cancer agent via blocking P-selectin-mediated malignant events of tumor metastasis.

Robust and Durable Photonic Crystal with Liquid-Repellent Property for Self-Cleaning Coatings and Structural Colored Textiles.

Photonic crystal coatings with unique structural colors and self-cleaning properties have been providing an efficient way for substrate coloration. However, the enhancement of the robustness and durability of structural colored coatings to meet the requirements in diverse environments remains a challenging task. Here, to realize the application of photonic crystal films under various kinds of conditions, we present a poly(fluoroalkyl acrylate)-based colloidal photonic crystal (fCPC) coating. Fluorinated core-interlayer-shell (FCIS) colloidal particles of polystyrene (PS) core, poly(methyl methacrylate) (PMMA) interlayer, and poly(fluoroalkyl acrylate-ethyl acrylate-butyl acrylate) (P(FA-EA-BA)) shell copolymers have been first prepared by a stepwise emulsion polymerization. fCPCs with self-supporting property, reprocessing ability, friction resistance, as well as excellent wettability and liquid-repellent properties are successfully obtained via the bending-induced ordering technique (BIOT). When applied in antifouling applications, the fCPC film exhibits resistance against various oil and inorganic liquids. Furthermore, the fCPC coatings demonstrate their durability under outdoor conditions by maintaining stable color appearances during rainy and sunny conditions. Additionally, an electronic product adhered with the fCPC coatings is presented, which exhibits a surface that remains clean even after prolonged usage in comparison to the conventional CPC coating. Structural colored textiles with enhanced stability and functionalized liquid-repellent properties are achieved through a one-step process using FCIS particles. Therefore, the developed self-cleaning and comprehensive fCPC coatings capable of withstanding diverse conditions may open up new avenues for the advancement of structural coloration in decoration, vehicle, textile, and building.

The anti-digestibility mechanism of soy protein isolate hydrolysate on natural starches with different crystal types.

The effects of soy protein isolate hydrolysate (SPIH) on the physicochemical properties and digestive characteristics of three starch types (wheat, potato, and pea) were investigated. Fourier-transform infrared spectroscopy and molecular dynamics simulations showed that hydrogen bonds were the driving force of the interaction between SPIH and starch. Furthermore, the SPIH was predicted to preferentially bind to the terminal region of starch using molecular dynamics simulations. Compared to pure starch, adding 20 % SPIH to wheat starch, potato starch, and pea starch, the content of resistant starch increased by 39.71 %, 125.66 % and 37.83 %, respectively. Both the radial distribution function (RDF) and low field-nuclear magnetic resonance (LF-NMR) showed that SPIH reduced the flow of water molecules in starch, indicating that SPIH competed with starch for water molecules. Multiple characterization experiments and molecular dynamics simulations confirmed that the anti-digestibility mechanism of SPIH on natural starches with different crystal types could be attributed to the interaction between starch and SPIH, which decreased the catalytic efficiency of amylase. This study clarified the anti-digestibility mechanism of SPIH on natural starches, which provides new insights into the production of low-glycemic index foods for the diabetic population.

Machine learning and experiments revealed a novel pyroptosis-based classification linked to diagnosis and immune landscape in spinal cord injury.

Background: Rising evidence indicates the development of pyroptosis in the initiation and pathogenesis of spinal cord injury (SCI). However, the associated effects of pyroptosis-related genes (PRGs) in SCI are unclear. Methods: We obtained the gene expression profiles of SCI and normal samples in the GEO. Database: The R package limma screened for differentially expressed (DE) PRGs and performed functional enrichment analysis. Mechanical learning and PPI analysis helped filter essential PRGs to diagnose SCI. Peripheral blood was collected for validation from ten SCI patients and eight healthy individuals. The association of essential PRGs with immune infiltration was evaluated, and pyroptosis subtypes were recognized in SCI patients by unsupervised cluster analysis. Besides, a SCI model was built for in vivo validation of essential PRGs. Result: We identified 25 DE-PRGs between SCI and normal controls. Functional enrichment analysis revealed the principal involvement of DE-PRGs in pyroptosis, inflammasome complex, interleukin-1 beta production, etc. Subsequently, three essential PRGs were identified and validated, showing excellent diagnostic efficacy and significant correlation with immune cell infiltration. Additionally, we developed diagnostic nomograms to predict the occurrence of SCI. Two pyroptosis subtypes exhibited distinct biological functions and immune landscapes among SCI patients. Finally, the expression of these essential PRGswas verified in vivo. Conclusion: The current study described the vital effects of pyroptosis-related genes in SCI, providing a novel direction for effective assessment and management of SCI.

Investigation on chain segment motions of various starch molecules under different glycerol-water system.

The molecular motion of starch at different glycerol concentrations (0, 20, 50, and 80 %) was investigated using Electron Paramagnetic Resonance (EPR) spectroscopy. Fourier-transform infrared (FTIR) spectroscopy and 1H nuclear magnetic resonance (1H NMR) spectroscopy confirmed that hydroxyl groups at the C2 and C3 positions of glucose units in corn starch (CS), waxy corn starch (WCS), and high amylose corn starch (HCS) were labeled with 4-amino-TEMPO. The crystallinities of CS, WCS, and HCS after spin-labeling decreased from 30.68 % to 3.21 %, 39.36 % to 1.65 %, and 28.54 % to 8.08 %, respectively. The pseudoplastic fluid properties of the spin-labeled starch remained shear-thin at different glycerol concentrations. EPR revealed the fast- and slow-motion components of the spin-labeled starch molecules dispersed in water. At a glycerol concentration of 20 %, the slow-motion component disappeared, indicating a faster rotational motion of the starch chain segments. As the glycerol concentration increased to 50 and 80 %, the rotational motion slowed because of high viscosity. In particular, the mobility of the spin-labeled WCS chains increased owing to easier access of glycerol and water to the branched structure. This study directly observed the dynamics of the molecular behavior of starch in glycerol-water systems.

Starch nanoparticles with predictable size prepared by alternate treatments of ball milling and ultrasonication.

In this study, starch nanoparticles (SNPs) were prepared by alternate treatments of liquid nitrogen ball milling and ultrasonication. The impact, shear and friction forces produced by ball milling, and acoustic cavitation and shear effects generated by ultrasonication disrupted starch granules to prepare SNPs. The SNPs possessed narrow particle size distribution (46.91-210.52 nm) and low polydispersity index (0.28-0.45). Additionally, the SNPs exhibited the irregular fragments with good uniformity. The relative crystallinity decreased from 34.91 % (waxy corn starch, WCS) to 0-25.91 % (SNPs), and the absorbance ratios of R1047/1022 decreased from 0.81 (WCS) to 0.60-0.76 (SNPs). The SNPs had lower thermal stability than that of WCS, characterized by a decrease in Td (temperature at maximum weight loss) from 309.39 °C (WCS) to 300.39-305.75 °C (SNPs). Furthermore, the SNPs exhibited excellent swelling power (3.48-28.02 %) and solubility (0.34-0.97 g/g). Notably, oil absorption capacity of the SNPs (9.77-15.67 g/g) was rather greater than that of WCS (1.33 g/g). Furthermore, the SNPs possessed the lower storage modulus (G'), loss modulus (G″) and viscosity than that of WCS. The SNPs with predictable size and high dispersion capability prepared in this study lay a foundation for expanding the application of SNPs.

Supra-Photothermal CO2 Methanation over Greenhouse-Like Plasmonic Superstructures of Ultrasmall Cobalt Nanoparticles.

Improving the solar-to-thermal energy conversion efficiency of photothermal nanomaterials at no expense of other physicochemical properties, e.g., the catalytic reactivity of metal nanoparticles, is highly desired for diverse applications but remains a big challenge. Herein, a synergistic strategy is developed for enhanced photothermal conversion by a greenhouse-like plasmonic superstructure of 4 nm cobalt nanoparticles while maintaining their intrinsic catalytic reactivity. The silica shell plays a key role in retaining the plasmonic superstructures for efficient use of the full solar spectrum, and reducing the heat loss of cobalt nanoparticles via the nano-greenhouse effect. The optimized plasmonic superstructure catalyst exhibits supra-photothermal CO2 methanation performance with a record-high rate of 2.3 mol gCo -1 h-1 , close to 100% CH4 selectivity, and desirable catalytic stability. This work reveals the great potential of nanoscale greenhouse effect in enhancing photothermal conversions through the combination with conventional promoting strategies, shedding light on the design of efficient photothermal nanomaterials for demanding applications.

Hierarchical Carbon Nanocages as Superior Supports for Photothermal CO2 Catalysis.

The exploitation of hierarchical carbon nanocages with superior light-to-heat conversion efficiency, together with their distinct structural, morphological, and electronic properties, in photothermal applications could provide effective solutions to long-standing challenges in diverse areas. Here, we demonstrate the discovery of pristine and nitrogen-doped hierarchical carbon nanocages as superior supports for highly loaded, small-sized Ru particles toward enhanced photothermal CO2 catalysis. A record CO production rate of 3.1 mol·gRu-1·h-1 with above 90% selectivity in flow reactors was reached for hierarchical nitrogen-doped carbon-nanocage-supported Ru clusters under 2.4 W·cm-2 illumination without external heating. Detailed studies reveal that the enhanced performance originates from the strong broadband sunlight absorption and efficient light-to-heat conversion of nanocage supports as well as the excellent intrinsic catalytic reactivity of sub-2 nm Ru particles. Our study reveals the great potential of hierarchical carbon nanocages in photothermal catalysis to reduce the fossil fuel consumption of various industrial chemical processes and stimulates interest in their exploitation for other demanding photothermal applications.