Structure-Performance Relationships for Tail Substituted Zwitterionic Betaine-Azobenzene Surfactants.

Azobenzene-containing surfactants (azo-surfactants) have garnered significant attention for their use in generating photoresponsive foams, interfaces, and colloidal systems. The photoresponsive behavior of azo-surfactants is driven by the conformational and electronic changes that occur when the azobenzene chromophore undergoes light-induced trans ⇌ cis isomerization. Effective design of surfactants and targeting of their properties requires a robust understanding of how the azobenzene functionality interacts with surfactant structure and influences overall surfactant behavior. Herein, a library of tail substituted azo-surfactants were synthesized and studied to better understand how surfactant structure can be tailored to exploit the azobenzene photoswitch. This work shows that tail group structure (length and branching) has a profound influence on the critical micelle concentration of azo-surfactants and their properties once adsorbed to an air-water interface. Neutron scattering studies revealed the unique role that intermolecular π-π azobenzene interactions have on the self-assembly of azo-surfactants, and how the influence of these interactions can be tuned using tail group structure to target specific aqueous aggregate morphologies.

Polycation radius of gyration in a polymeric ionic liquid (PIL): the PIL melt is not a theta solvent.

The conformation of the polycation in the prototypical polymeric ionic liquid (PIL) poly(3-methyl-1-aminopropylimidazolylacrylamide) bis(trifluoromethylsulfonyl)imide (poly(3MAPIm)TFSI) was probed using small-angle neutron scattering (SANS) and ultra-small-angle neutron scattering (USANS) at 25 °C and 80 °C. Poly(3MAPIm)TFSI contains microvoids which lead to intense low q scattering that can be mitigated using mixtures of hydrogen- and deuterium-rich materials, allowing determination of the polycation conformation and radius of gyration (Rg). In the pure PIL, the polycation adopts a random coil conformation with Rg = 52 ± 0.5 Å. In contrast to conventional polymer melts, the pure PIL is not a theta solvent for the polycation. The TFSI- anions, which comprise 48% v/v of the PIL, are strongly attracted to the polycation and act like small solvent molecules which leads to chain swelling analogous to an entangled, semi-dilute, or concentrated polymer solution in a good solvent.

Exploring the transition of polydopamine-shelled perfluorohexane emulsion droplets into microbubbles using small- and ultra-small-angle neutron scattering.

Perfluorocarbon emulsion droplets are interesting colloidal systems with applications, ranging from diagnostics and theranostics to drug delivery, due to their controllable phase transition into microbubbles via heat application or acoustic droplet vapourisation. This work highlights the application of small- and ultra-small-angle neutron scattering (SANS and USANS, respectively), in combination with contrast variation techniques, in observing the in situ phase transition of polydopamine-stabilised perfluorohexane (PDA/PFH) emulsion droplets into microbubbles during heating. Results show peak USANS intensities at temperatures around 90 °C, which indicates that the phase transition of PDA/PFH emulsion droplets occurs at significantly higher temperatures than the bulk boiling point of pure liquid PFH (56 °C). Analysis and model fitting of the SANS and USANS data allowed us to estimate droplet sizes and interfacial properties at different temperatures (20 °C, 90 °C, and 20 °C after cooling), giving valuable insights about the transformation of these polydisperse emulsion droplet systems.

In Situ Nanostructural Analysis of Concentrated Wormlike Micellar Fluids Comprising Sodium Laureth Sulfate and Cocamidopropyl Betaine Using Small-Angle Neutron Scattering.

Concentrated wormlike micellar fluids form the basis for a vast array of formulated products, from liquid soaps and shampoos to drag reduction and drilling fluids. Typically, these systems are analyzed using bulk rheological measurements to determine their flow properties and cryo-microscopy to detect their nanostructure. Small-angle neutron scattering provides an opportunity to directly and nonperturbatively analyze nanostructure in situ but is complicated for concentrated systems by correlations from interparticle volume exclusion. Here, we use small-angle and ultra-small-angle neutron scattering to probe directly for the first time the nanostructure of concentrated wormlike micellar fluids composed of the widely used surfactant pair sodium laureth sulfate and cocamidopropyl betaine in aqueous electrolytes. Obtained data are analyzed using different approaches to determine scattering contributions from the wormlike particles themselves and interactions between them. It is found that approximating worms as locally rigid cylinders offers some insight into their aggregation dimensions at short length scales, and both volume exclusion and screened Coulombic interaction potentials describe interactions reasonably well. Using the semi-empirical polymer reference interaction site model (PRISM) gives excellent agreement with observed scattering, and physical insight obtained using this approach is discussed in detail. A drawback of this method is the significant complexity in coding the model in order to fit data, so to facilitate this for future researchers, we provide with this paper a fully operational, open-source code to utilize this model.

Self-Assembly of Surfactin into Nanofibers with Hydrophilic Channels in Nonpolar Organic Media.

We investigated the self-assembly of surfactin (SFNa), a cyclic peptide amphiphile produced by Bacillus subtilis, in a nonpolar organic solvent, namely, cyclohexane (CHx). The CHx solution of SFNa formed a thermoreversible organogel. Transmission electron microscopy and small-angle X-ray scattering (SAXS) analyses showed that gelation of the CHx solution of SFNa was caused by physical cross-linking of SFNa nanofibers. Wide-angle X-ray diffraction and Fourier-transform infrared analyses showed that the SFNa nanofibers were formed by one-dimensional stacking of SFNa rings with a period of 0.48 nm corresponding to the length of inter-ring hydrogen bonds between amide groups. A combination of SAXS and small-angle neutron scattering investigations of CHx and deuterated CHx solutions of SFNa nanofibers containing H2O or D2O showed that the SFNa nanofibers had a hydrophilic interior and formed water channels by water incorporation in this region.

Structural relationships for the design of responsive azobenzene-based lyotropic liquid crystals.

Light-responsive binary (azobenzene + solvent) lyotropic liquid crystals (LCs) were investigated by structural modification of simple azobenzene molecules. Three benzoic acid-containing azobenzene molecules 4-(4-(hydroxyphenyl)diazenyl)benzoic acid (AZO1), 3-(4-(hydroxyphenyl)diazenyl)benzoic acid (AZO2) and 5-(4-(hydroxyphenyl)diazenyl)isophthalic acid (AZO3) were produced with various amide substitutions to produce tectons with a variety of hydrophobicity, size and branching. The LC mesophases formed by binary (azobenzene + solvent) systems with low volatility solvents dimethylsulfoxide (DMSO) and N,N-dimethylformamide (DMF) as well as the protic ionic liquids ethylammonium formate (EAF) and propylammonium formate (PAF), were investigated using a combination of small-angle X-ray and neutron scattering (SAXS and SANS) as well as polarising light microscopy (PLM). Increasing alkyl group length was found to have a strong influence on LC phase spacing, and changes in the position of substitution on the benzene ring influenced the preferred curvature of phases. UV-induced trans to cis isomerization of the samples was shown to influence ordering and optical birefringence, indicating potential applications in optical devices.

Interfacial Structures of Droplet-Stabilized Emulsions Formed with Whey Protein Microgel Particles as Revealed by Small- and Ultra-Small-Angle Neutron Scattering.

Droplet-stabilized emulsions (DSEs) were made from oil droplets coated with whey protein microgel (WPM) particles. The WPM particles with z-average hydrodynamic diameters of 270.9 ± 4.7 and 293.8 ± 6.7 nm were obtained by heating whey proteins with 10 mM phosphate buffer, pH 5.9 (-PB) and no buffer (-NPB), respectively. The primary emulsions coated by WPM-NPB and WPM-PB particles had mass fractal dimensions of ∼2.75, as determined by small- and ultra-small-angle neutron scattering (SANS and USANS). The size of the subsequently formed DSEs (D32 ≈ 7-23 µm), which were stabilized by the primary emulsion droplets, made with either WPM-NPB (termed DSE-NPB) or WPM-PB (termed DSE-PB) was dependent on the concentration of the primary emulsion (10-60 wt %) in the aqueous phase. At the DSE-NPB interface, the adsorbed primary emulsion droplets formed a fractal network with a surface fractal dimension of about 3, indicating a rough interfacial layer. Combined SANS and USANS allowed a comprehensive understanding of the multilength scale structures from WPM particles to DSEs.

Protein-Eye View of the in Meso Crystallization Mechanism.

For evolving biological and biomedical applications of hybrid protein?lipid materials, understanding the behavior of the protein within the lipid mesophase is crucial. After more than two decades since the invention of the in meso crystallization method, a protein-eye view of its mechanism is still lacking. Numerous structural studies have suggested that integral membrane proteins preferentially partition at localized flat points on the bilayer surface of the cubic phase with crystal growth occurring from a local fluid lamellar L? phase conduit. However, studies to date have, by necessity, focused on structural transitions occurring in the lipid mesophase. Here, we demonstrate using small-angle neutron scattering that the lipid bilayer of monoolein (the most commonly used lipid for in meso crystallization) can be contrast-matched using deuteration, allowing us to isolate scattering from encapsulated peptides during the crystal growth process for the first time. During in meso crystallization, a clear decrease in form factor scattering intensity of the peptides was observed and directly correlated with crystal growth. A transient fluid lamellar L? phase was observed, providing direct evidence for the proposed mechanism for this technique. This suggests that the peptide passes through a transition from the cubic QII phase, via an L? phase to the lamellar crystalline Lc phase with similar layered spacing. When high protein loading was possible, the lamellar crystalline Lc phase of the peptide in the single crystals was observed. These findings show the mechanism of in meso crystallization for the first time from the perspective of integral membrane proteins.

Tuning the structure, thermal stability and rheological properties of liquid crystal phases via the addition of silica nanoparticles.

The effects of adding silica nanoparticles of varying size and surface chemistry to a liquid crystal system were analysed using small-angle scattering and polarising light microscopy, with varying temperature and applied shear. It was found that nanoparticles aggregate at domain boundaries, causing a reduction in average liquid crystal domain size. These particles can inhibit phase transitions that occur at specific temperatures, ascribed to aggregates posing a kinetic barrier to rearrangement required for phase transitions. Nanoparticles can also promote the existence of specific phases, such as a deswollen hexagonal mesophase for the system studied here, suggested to be caused by silica aggregates 'templating' new phases. These findings have important implications for the application of such systems in biotechnology, and particularly the ability to completely inhibit a phase change at low temperature suggests the potential for mechanistic insight into new methods of cryopreservation.

Tough Photocrosslinked Silk Fibroin/Graphene Oxide Nanocomposite Hydrogels.

The development of protein-based hydrogels for tissue engineering applications is often limited by their mechanical properties. Herein, we present the facile fabrication of tough regenerated silk fibroin (RSF)/graphene oxide (GO) nanocomposite hydrogels by a photochemical cross-linking method. The RSF/GO composite hydrogels demonstrated soft and adhesive properties during initial stages of photocrosslinking (<2 min), which is not observed for the pristine RSF hydrogel, and rendered a tough and nonadhesive hydrogel upon complete cross-linking (10 min). The composite hydrogels exhibited superior tensile mechanical properties, increased ß-sheet content, and decreased chain mobility compared to that of the pristine RSF hydrogels. The composite hydrogels demonstrated Young's modulus as high as ∼8 MPa, which is significantly higher than native cartilage (∼1.5 MPa), and tensile toughness as high as ∼2.4 MJ/m3, which is greater than that of electroactive polymer muscles and at par with RSF/GO composite membranes fabricated by layer-by-layer assembly. Small-angle scattering study reveals the hierarchical structure of photocrosslinked RSF hydrogels to comprise randomly distributed water-poor (hydrophobic) and water-rich (hydrophilic) regions at the nanoscale, whereas water pores and channels exhibiting fractal-like characteristics at the microscale. The size of hydrophobic domain (containing ß-sheets) was observed to increase slightly with GO incorporation and/or alcohol post-treatment, whereas the size of the hydrophilic domain (intersheet distance containing random coils) was observed to increase significantly, which influences/affects water uptake capacity, cross-link density, and mechanical properties of hydrogels. The presented results have implications for both fundamental understanding of the structure-property relationship of RSF-based hydrogels and their technological applications.

Bulk properties of aqueous graphene oxide and reduced graphene oxide with surfactants and polymers: adsorption and stability.

A diverse range of molecular surfactants and polymers have been incorporated into aqueous graphene oxide (GO) and reduced graphene oxide (rGO) dispersions in order to understand the complex relationship between surface chemistry, surface forces and interfacial thermodynamics of these materials with typical amphiphiles. Surfactant additives were systematically varied in terms of their charge and hydrophobicity to reveal important structure-function relationships affecting adsorption and interaction with GO and rGO surfaces. Small-angle (and ultra small-angle) neutron scattering was employed to examine and monitor the interactions and self-assembly in each system. Charge was found to be the overriding factor driving adsorption, as cationic surfactants very readily adsorbed to both GO and rGO, whereas anionic surfactants gave little to no evidence of adsorption despite possessing hydrophobic tail-groups. Molecules of neutral charge such as nonionic and zwitterionic surfactants as well as neutral polymers also showed strong affinities for GO and rGO, indicating that dispersion and dipole (induction polarisation) interactions also play a significant role in adsorption with these materials. Modelling the neutron data revealed in many cases a q-2 slope in the low q and ultra low q regions, indicating that scattering was occurring from large, flat surfaces (lamellae or bilayers), suggesting an effective flattening of the sheets in dispersion. The results presented thus help to form a roadmap for the behaviour of GO and rGO with surfactants and polymers, relevant to adsorption, stabilisation, formulation and coating in aqueous environments as adsorbent and functional materials.

Structural and rheological changes of lamellar liquid crystals as a result of compositional changes and added silica nanoparticles.

Lamellar liquid crystals comprising oil, water and surfactant(s) were formulated and analysed in order to examine how these materials responded to the inclusion of inorganic nanoparticles, in terms of their structural and rheological characteristics. Lamellar phases were formed from mixtures of water, para-xylene and Triton X-100, and analysis was performed via small-angle neutron scattering (SANS), polarising light microscopy (PLM), and amplitude and viscosity sweeps. The partial replacement of Triton X-100 with oleic acid appeared to cause an increase in bilayer thickness, attributed to less efficient packing of the different molecules. Addition of oleic acid also appeared to cause both a loss in lamellar repeat ordering, attributed to heterogeneity of the bilayers, and a rise in long range order, potentially caused by the stiffer bilayers. Adding silica nanoparticles of different size and surface chemistry caused a stiffening of the samples at the expense of a longer-range lamellar repeat order. This strengthening is attributed to aggregation at the domain boundaries, and it was found that hydrophobic particles tended to form stronger aggregates while for larger particles (20 nm as opposed to 10 nm) aggregation was apparently reversible. These results give a more comprehensive understanding of how to reliably control the structural and rheological properties of lamellar liquid crystals, and emphasise the importance of the size and surface chemistry of any inclusions, for applications in cosmetics, drug delivery, and microfluidics.

Hierarchical self-assembly of a striped gyroid formed by threaded chiral mesoscale networks.

Numerical simulations reveal a family of hierarchical and chiral multicontinuous network structures self-assembled from a melt blend of Y-shaped ABC and ABD three-miktoarm star terpolymers, constrained to have equal-sized A/B and C/D chains, respectively. The C and D majority domains within these patterns form a pair of chiral enantiomeric gyroid labyrinths (srs nets) over a broad range of compositions. The minority A and B components together define a hyperbolic film whose midsurface follows the gyroid minimal surface. A second level of assembly is found within the film, with the minority components also forming labyrinthine domains whose geometry and topology changes systematically as a function of composition. These smaller labyrinths are well described by a family of patterns that tile the hyperbolic plane by regular degree-three trees mapped onto the gyroid. The labyrinths within the gyroid film are densely packed and contain either graphitic hcb nets (chicken wire) or srs nets, forming convoluted intergrowths of multiple nets. Furthermore, each net is ideally a single chiral enantiomer, induced by the gyroid architecture. However, the numerical simulations result in defect-ridden achiral patterns, containing domains of either hand, due to the achiral terpolymeric starting molecules. These mesostructures are among the most topologically complex morphologies identified to date and represent an example of hierarchical ordering within a hyperbolic pattern, a unique mode of soft-matter self-assembly.

Gd-DTPA-Dopamine-Bisphytanyl Amphiphile: Synthesis, Characterisation and Relaxation Parameters of the Nanoassemblies and Their Potential as MRI Contrast Agents.

Here, a new amphiphilic magnetic resonance imaging (MRI) contrast agent, a Gd(III)-chelated diethylenetriaminepentaacetic acid conjugated to two branched alkyl chains via a dopamine spacer, Gd-DTPA-dopamine-bisphytanyl (Gd-DTPA-Dop-Phy), which is readily capable of self-assembling into liposomal nanoassemblies upon dispersion in an aqueous solution, is reported. In vitro relaxivities of the dispersions were found to be much higher than Magnevist, a commercially available contrast agent, at 0.47 T but comparable at 9.40 T. Analysis of variable temperature (17)O NMR transverse relaxation measurements revealed the water exchange of the nanoassemblies to be faster than that previously reported for paramagnetic liposomes. Molecular reorientation dynamics were probed by (1)H NMRD profiles using a classical inner and outer sphere relaxation model and a Lipari-Szabo "model-free" approach. High payloads of Gd(III) ions in the liposomal nanoassemblies made solely from the Gd-DTPA-Dop-Phy amphiphiles, in combination with slow molecular reorientation and fast water exchange makes this novel amphiphile a suitable candidate to be investigated as an advanced MRI contrast agent.

Evaluation of Gd-DTPA-monophytanyl and phytantriol nanoassemblies as potential MRI contrast agents.

Supramolecular self-assembling amphiphiles have been widely used in drug delivery and diagnostic imaging. In this report, we present the self-assembly of Gd (III) chelated DTPA-monophytanyl (Gd-DTPA-MP) amphiphiles incorporated within phytantriol (PT), an inverse bicontinuous cubic phase forming matrix at various compositions. The dispersed colloidal nanoassemblies were evaluated as potential MRI contrast agents at various magnetic field strengths. The homogeneous incorporation of Gd-DTPA-MP in PT was confirmed by polarized optical microscopy (POM) and synchrotron small-angle X-ray scattering (SAXS) of the bulk phases of the mixtures. The liquid crystalline nanostructures, morphology, and the size distribution of the nanoassemblies were studied by SAXS, cryogenic transmission electron microscopy (cryo-TEM), and dynamic light scattering (DLS). The dispersions with up to 2 mol % of Gd-DTPA-MP in PT retained inverse cubosomal nanoassemblies, whereas the rest of the dispersions transformed to liposomal nanoassemblies. In vitro relaxivity studies were performed on all the dispersions at 0.54, 9.40, and 11.74 T and compared to Magnevist, a commercially available contrast agent. All the dispersions showed much higher relaxivities compared to Magnevist at both low and high magnetic field strengths. Image contrast of the nanoassemblies was also found to be much better than Magnevist at the same Gd concentration at 11.74 T. Moreover, the Gd-DTPA-MP/PT dispersions showed improved relaxivities over the pure Gd-DTPA-MP dispersion at high magnetic fields. These stable colloidal nanoassemblies have high potential to be used as combined delivery matrices for diagnostics and therapeutics.

Small-Angle Neutron Scattering Insights into 2-Ethylhexyl Laurate: A Remarkable Bioester.

Commercial (protiated) samples of the "green" and biodegradable bioester 2-ethylhexyl laurate (2-EHL) were mixed with D-2-EHL synthesized by hydrothermal deuteration, with the mixtures demonstrating bulk structuring in small-angle neutron scattering measurements. Analysis in a polymer scattering framework yielded a radius of gyration (Rg) of 6.5 Å and a Kuhn length (alternatively described as the persistence length or average segment length) of 11.2 Å. Samples of 2-EHL dispersed in acetonitrile formed self-assembled structures exceeding the molecular dimensions of the 2-EHL, with a mean aggregation number (Nagg) of 3.5 ± 0.2 molecules across the tested concentrations. We therefore present structural evidence that this ester can function as a nonionic (co)surfactant. The available surfactant-like conformations appear to enable performance beyond the low calculated hydrophilic-lipophilic balance value of 2.9. Overall, our data offer an explanation for 2-EHL's interfacial adsorption properties via self-assembly, resulting in strong emolliency and lubricity for this sustainable ester-based bio-oil.

Salt-Induced Linker Dehydration Modulates Micellar Structure in Ether-Linked Sulfate Surfactants.

Ether-linked surfactants are widely used in formulations such as liquid soaps, but despite their ubiquity, it is unclear how n-ethylene glycol linkers in surfactants, such as sodium lauryl n-(ethylene glycol) sulfate (SLEnS), influence micellar packing in the presence of NaCl. In the present work, we probe the structure and hydration of ether linkers in micelles comprising monodisperse SLEnS surfactants using contrast-variation small-angle neutron scattering (CV-SANS) and small-angle X-ray scattering (SAXS). Using SAXS, changes in micellar structure were observed for SLEnS (n = 1, 2, or 3) arising from the extent of ethoxylation. Scattering profiles indicated a clear transition from elongated cylindrical micelles to shorter ellipsoidal micelles with increasing ethoxylation. With CV-SANS, micellar structure and linker geometries of SLE3S were able to be resolved, indicating that a change in micellar architecture is modulated by dehydration of the tri(ethylene glycol) linker, offering new insights into the role of water and ions in the self-assembly of this key class of surfactants.

Studying the photothermal activation of polydopamine-shelled, phase-change emulsion droplets into microbubbles using small- and ultra-small-angle neutron scattering.

Polydopamine-shelled perfluorocarbon (PDA/PFC) emulsion droplets are promising candidates for medical imaging and drug delivery applications. This study investigates their phase transition into microbubbles under near-infrared (NIR) illumination in situ using small- and ultra-small-angle neutron scattering (SANS and USANS) and contrast variation techniques. Supported by optical microscopy, thermogravimetric analysis, and ultrasound imaging, SANS and USANS results reveal rapid phase transition rates upon NIR illumination, dependent on PFC content and droplet size distribution. Specifically, perfluoropentane droplets rapidly transform into bubbles upon NIR irradiation, whereas perfluorohexane droplets exhibit greater resistance to phase change (bulk boiling points = 30 °C and 60 °C, respectively). Furthermore, smaller emulsion droplets with unimodal distribution resist NIR-triggered phase changes better than their bimodal counterparts. This observation is attributable to the lower boiling points of large emulsion droplets (lower Laplace pressure than smaller droplets) and the faster photothermal heating rates due to their thicker polydopamine shells. The insights gained from these techniques are crucial for designing phase-change emulsions activated by NIR for photothermal therapies and controlled drug delivery.

Anion Architecture Controls Structure and Electroresponsivity of Anhalogenous Ionic Liquids in a Sustainable Fluid.

Three nonhalogenated ionic liquids (ILs) dissolved in 2-ethylhexyl laurate (2-EHL), a biodegradable oil, are investigated in terms of their bulk and electro-interfacial nanoscale structures using small-angle neutron scattering (SANS) and neutron reflectivity (NR). The ILs share the same trihexyl(tetradecyl)phosphonium ([P6,6,6,14]+) cation paired with different anions, bis(mandelato)borate ([BMB]-), bis(oxalato)borate ([BOB]-), and bis(salicylato)borate ([BScB]-). SANS shows a high aspect ratio tubular self-assembly structure characterized by an IL core of alternating cations and anions with a 2-EHL-rich shell or corona in the bulk, the geometry of which depends upon the anion structure and concentration. NR also reveals a solvent-rich interfacial corona layer. Their electro-responsive behavior, pertaining to the structuring and composition of the interfacial layers, is also influenced by the anion identity. [P6,6,6,14][BOB] exhibits distinct electroresponsiveness to applied potentials, suggesting an ion exchange behavior from cation-dominated to anion-rich. Conversely, [P6,6,6,14][BMB] and [P6,6,6,14][BScB] demonstrate minimal electroresponses across all studied potentials, related to their different dissociative and diffusive behavior. A mixed system is dominated by the least soluble IL but exhibits an increase in disorder. This work reveals the subtlety of anion architecture in tuning bulk and electro-interfacial properties, offering valuable molecular insights for deploying nonhalogenated ILs as additives in biodegradable lubricants and supercapacitors.

Shear influence on colloidal cluster growth: a SANS and USANS study.

This study examines the time evolution of silica/water clusters where the formation of a gel network from unitary silica particles is interrupted by a simple Couette shear field. The aim is to enable the general understanding of this simple system by examining the microscopic basis for the changes in viscosity by providing structural inputs from small-angle scattering for a simple theoretical model. The experimental system is an 8.3 nm particle silica solution (Ludox) where the gelation has been initiated by lowering the pH in a Couette cell providing a constant shear rate of 250 s-1. A unified small-angle neutron scattering (SANS) and ultra-small-angle neutron scattering (USANS) procedure is described to measure the scattered intensity in a wavevector range of 3 × 10-4 ≤ q (nm-1) ≤ 3.1 × 10-1, probing structural changes over a broad range of length scales from the nanometre to the micrometre. Scattering data provide a new means of better understanding the behaviour of colloidal clusters when subjected to an external applied shear over a continuous time sequence after gel initiation; a fit of the time-dependent scattered intensity leads to an estimation of the cluster's effective volume fraction and size as a function of time. A reductionist theoretical basis is described to predict the time-dependent viscosity behaviour of the sheared colloidal suspension gel-initiated cluster growth from the volume fraction of the clusters.