Briquette production from a mixture of biomass: poultry slaughterhouse sludge and sawdust.

This study refers to the development of hybrid briquettes using centrifuged sludge from the wastewater treatment of poultry and sawdust from furniture industry. The aim was to evaluate the performance of briquettes as a source of thermal energy, mitigating the risks of the current elimination and reducing the operational costs of their destination. To know the oxidizing characteristics of the briquettes and their mechanical resistance, superior calorific power, ash content, volatile materials, fixed carbon, and resistance to axial compression were evaluated. Thermogravimetric and differential exploratory calorimetry analyses were performed. Statistical treatments were carried out to verify the most significant factors to produce briquettes, the best proportions of the raw materials, and to evaluate whether there is interference from moisture and glue flour used as a binder. The best condition of the sludge-sawdust mixture was 15% and 85%, respectively, with 6.0% moisture. The best-case treatment had 23.82-MPa mechanical resistance, a calorific value of 17.20 MJ kg-1, and a density of 1374.15 kg m-3.

Briquettes production for use as power source for combustion using charcoal thin waste and sanitary sewage sludge.

This study evaluated the feasibility of production of briquettes using fine charcoal, sewage sludge, and mixtures thereof for use in energy production. The briquettes of 7-8 cm diameter and 20 cm length were produced in the conical press extruder type, mixing sewage sludge to charcoal fines in different ratios: 0:100, 25:75, 50:50, 75:25, and 100:0, with the addition of a binder (glue flour) in a ratio of 8 mass% prepared for briquetting. After air drying (temperatures between 24 and 30°C) for 48 h, the mechanical, thermal, and morphological characterizations were performed. The morphological properties of the briquettes were evaluated by scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) spectroscopy. The briquettes produced had mechanical strength, with values between 210 and 420 kgf, and densities between 0.75 and 0.91 g cm-3. The calorific value of briquettes was in the range from 13.21 to 23.10 MJ kg-1, in which there was an increase with the increase of concentration of charcoal fines in the mixture. Thermogravimetric analysis showed mass losses that occurred in the temperature range between 150 and 740 °C. The results of the mechanical and thermal properties showed the feasibility of using fine charcoal briquettes from sewage sludge as well as mixtures thereof, for the production of energy. The fine charcoal briquette was the one with the highest calorific value, but not showed the highest resistance to mechanical shock.