Anaerobic digestion of microalgal biomass for bioenergy production, removal of nutrients and microcystin: current status.

Using renewable microalgal biomass as active feedstocks for biofuels and bioproducts is explored to substitute petroleum-based fuels and chemicals. In the last few years, the importance of microalgae biomass has been realized as a renewable feedstock due to several positive attributes associated with it. Biorefinery via anaerobic digestion (AD) of microalgal biomass is a promising and sustainable method to produce value-added chemicals, edible products and biofuels. Microalgal biomass pretreatment is a significant process to enhance methane production by AD. Findings on the AD microbial community's variety and organization can give novel in turn on digester steadiness and presentation. This review presents a vital study of the existing facts on the AD microbial community and AD production. Co-digestion of microalgal biomass with different co-substrates was used in AD to enhance biogas production, and the process was economically viable with improved biodegradability. Microcystins, which are produced by toxic cyanobacterial blooms, create a severe hazard to environmental health. Anaerobic biodegradation is an effective method to degrade the microcystins and convert into nontoxic products. However, for the cost-effective conversion of biomass to energy and other beneficial byproducts, additional highly developed research is still required for large-scale AD of microalgal biomass.

Biofuel production from bio-waste by biological and physical conversion processes.

This research is focused on the feasibility of biofuel from water hyacinth mixed with cassava starch sediment by biological and physical conversion processes and the comparison of the gross electricity production in these processes. The biological conversion process produced biomethane by anaerobic digestion. The optimal conditions of biomethane production were a ratio of water hyacinth and cassava starch sediment at 25:75, initial pH of 7.5, thermophilic temperature (55 ± 2°C) and C/N ratio of 30. The maximum biomethane yield measured was 436.82 mL CH4 g chemical oxygen demand (COD)-1 and the maximum COD removal was 87.40%. The physical conversion process was bio-briquette. It was found that the ratios of water hyacinth and cassava starch sediment at 10:90, 20:80, 30:70, 40:60 and 50:50 were the best ratio of fuel properties and close to the Thai Community Product Standard, with heating values of 15.66, 15.43, 15.10, 14.88 and 14.58 MJ kg-1, respectively. Moreover, results showed that the gross electricity production of the biological conversion process (biomethane) was 3.90 kWh and the gross electricity production of the physical conversion process (bio-briquette) from the ratios of water hyacinth and cassava starch sediment at 10:90, 20:80, 30:70, 40:60 and 50:50 were 1.52, 1.50, 1.47, 1.45 and 1.42 kWh, respectively.

Biosorption of Remazol Brilliant Blue R textile dye using Clostridium beijerinckii by biorefinery approach.

The current study proposes RBBR biosorption by Clostridium beijerinckii DSMZ 6422 biomass remaining after biobutanol production from pumpkin peel (PP) by a zero-waste approach. Efficient biobutanol production was achieved by investigating initial PP concentrations (5-20% without or with enzymatic hydrolysis) and fermentation time. According to this, the highest concentrations of biobutanol and total ABE were obtained as 4.87 g/L and 8.13 g/L in the presence of 10% PP without enzymatic hydrolysis at 96 h. Furthermore, based on the zero-waste approach, C. beijerinckii DSMZ 6422 biomass obtained after biofuel production was used as a biosorbent for the removal of RBBR dye. Response surface methodology (RSM), commonly utilized for the experimental design, was used to specify the optimized biosorption conditions of RBBR, including initial dye concentration (50-200 mg/L), initial pH (2-6), biosorbent concentration (1-3 g/L), and contact time (0-240 min). The highest biosorption under optimized conditions with RSM was 98% in the presence of 194.36 mg/L RBBR and 2.65 g/L biosorbent at pH 2 and 15 min. This is the first report in the literature about the biosorption of RBBR dye by anaerobic C. beijerinckii biomass after the biobutanol production process. This study also shows the efficient usage of agricultural and microbial wastes in different areas based on zero-waste applications.

Bioupgrading of the aqueous phase of pyrolysis oil from lignocellulosic biomass: a platform for renewable chemicals and fuels from the whole fraction of biomass.

Pyrolysis, a thermal decomposition without oxygen, is a promising technology for transportable liquids from whole fractions of lignocellulosic biomass. However, due to the hydrophilic products of pyrolysis, the liquid oils have undesirable physicochemical characteristics, thus requiring an additional upgrading process. Biological upgrading methods could address the drawbacks of pyrolysis by utilizing various hydrophilic compounds as carbon sources under mild conditions with low carbon footprints. Versatile chemicals, such as lipids, ethanol, and organic acids, could be produced through microbial assimilation of anhydrous sugars, organic acids, aldehydes, and phenolics in the hydrophilic fractions. The presence of various toxic compounds and the complex composition of the aqueous phase are the main challenges. In this review, the potential of bioconversion routes for upgrading the aqueous phase of pyrolysis oil is investigated with critical challenges and perspectives.

Physical and biological dosimetric margin according to prescription method for stereotactic body radiation therapy.

This study aimed to expand the biological conversion factor (BCF) model, which converts the physical dosimetric margin (PDM) to the biological dosimetric margin (BDM) for point prescription with 3-dimensional conformal radiation therapy (3DCRT) and the marginal prescription method with volumetric-modulated arc radiotherapy (VMAT). The VMAT of the marginal prescription and the 3DCRT of the point prescription with lung stereotactic body radiation therapy (SBRT) by using RayStation were planned. The biological equivalent dose (BED) for a dose per fraction (DPF) of 3-20 Gy was calculated from these plans. The dose was perturbed with the calculation using a 1-mm step isocenter shift. The dose covering 95% of the target was greater than or equal to 90% of the prescribed physical dose, and the BED were defined as the PDM and BDM, respectively. The BCF was created as a function of the DPF. The PDM and BDM for all DPFs were larger with the point prescription method than with the marginal prescription method. The marginal prescription method with a 60% isodose line had a larger PDM and BDM. The BCF with the point prescription was smaller than that with the marginal prescription in the left-right (LR), anterior-posterior (AP) and cranio-caudal (CC) directions. In the marginal prescription method, the 60% isodose line had a higher BCF. In conclusion, the improved BCF method could be converted to BDM for point prescription with 3DCRT and marginal prescription method with VMAT, which is required for stereotactic radiation therapy in radiobiology-based treatment planning.

A comprehensive review on the biological conversion of lignocellulosic biomass into hydrogen: Pretreatment strategy, technology advances and perspectives.

The globe has dependent on energy generation and utilization for many years; conversely, ecological concerns constrained the world to view hydrogen as an alternative for economic development. Lignocellulosic biomass is broadly accessible as a low-cost renewable feedstock and nonreactive nature; it has received a lot of consideration as a global energy source and the most attractive alternative to replace fossil natural substances for energy production. Pretreatment of lignocellulosic biomass is essential to advance its fragmentation and lower the lignin content for sustainable energy generation. This review's goal is to provide the different pretreatment strategies for enlarging the solubility and surface area of lignocellulosic biomass. The biological conversion of lignocellulosic biomass to hydrogen was reviewed and operational conditions and enhancing methods were discussed. This review summarizes the working conditions, parameters, yield percentages, techno-economic analysis, challenges, and future recommendations on the direct conversion of biomass to hydrogen.

Biological conversion of carbon monoxide and hydrogen by anaerobic culture: Prospect of anaerobic digestion and thermochemical processes combination.

Waste biomass is considered a promising renewable energy feedstock that can be converted by anaerobic digestion. However, anaerobic digestion application can be challenging due to the structural complexity of several waste biomass kinds. Therefore, coupling anaerobic digestion with thermochemical processes can offset the limitations and convert the hardly biodegradable waste biomass, including digestate residue, into value-added products: syngas and pyrogas (gaseous mixtures consisting mainly of H2, CO, CO2), bio-oil, and biochar for further valorisation. In this review, the utilisation boundaries and benefits of the aforementioned products by anaerobic culture are discussed. First, thermochemical process parameters for an enhanced yield of desired products are summarised. Particularly, the microbiology of CO and H2 mixture biomethanation and fermentation in anaerobic digestion is presented. Finally, the state-of-the-art biological conversion of syngas and pyrogas to CH4 mediated by anaerobic culture is adequately described. Extensive research shows the successful selective biological conversion of CO and H2 to CH4, acetic acid, and alcohols. The main bottleneck is the gas-liquid mass transfer which can be enhanced appropriately by bioreactors' configurations. A few research groups focus on bio-oil and biochar addition into anaerobic digesters. However, according to the literature review, there has been no research for utilising all value-added products at once in anaerobic digestion published so far. Although synergic effects of such can be expected. In summary, the combination of anaerobic digestion and thermochemical processes is a promising alternative for wide-scale waste biomass utilisation in practice.

Utilization of agricultural lignocellulosic wastes for biofuels and green diesel production.

The ever-growing human population has resulted in the expansion of agricultural activity; evident by the deforestation of rainfoamrests as a means of acquiring fertile land for crops. The crops and fruits produced by such means should be utilized completely; however, there are still losses and under-exploitation of these produces which has resulted in wastes being mounted in landfills. These underutilized agricultural wastes including vegetables and fruits can serve as a potential source for biofuels and green diesel. This paper discusses the main routes (e.g., biological and thermochemical) for producing biofuels such as bioethanol, biodiesel, biogas, bio-oil and green diesel from underutilized crops by emphasizing recent technological innovations for improving biofuels and green diesel yields. The future prospects of a successful production of biofuels and green diesel by this source are also explained. Underutilized lignocelluloses including fruits and vegetables serve as a prospective biofuel and green diesel generation source for the future prosperity of the biofuel industry.

Sustainable Seaweed Biotechnology Solutions for Carbon Capture, Composition, and Deconstruction.

Seaweeds or macroalgae are attractive candidates for carbon capture, while also supplying a sustainable photosynthetic bioenergy feedstock, thanks to their cultivation potential in offshore marine farms. Seaweed cultivation requires minimal external nutrient requirements and allows for year-round production of biomass. Despite this potential, there remain significant challenges associated with realizing large-scale, sustainable agronomics, as well as in the development of an efficient biomass deconstruction and conversion platform to fuels and products. Recent biotechnology progress in the identification of enzymatic deconstruction pathways, tailored to complex polymers in seaweeds, opens up opportunities for more complete utilization of seaweed biomass components. Effective, scalable, and economically viable conversion processes tailored to seaweed are discussed and gaps are identified for yield and efficiency improvements.

Stimulation of cell growth by addition of tungsten in batch culture of a methanotrophic bacterium, Methylomicrobium alcaliphilum 20Z on methane and methanol.

It is carried out for researches to convert methane, the second most potent greenhouse gas, to high-value chemicals and fuels by using methanotrophs. In this study, we observed that cell growth of Methylomicrobium alcaliphilum 20Z in the batch cultures on methane or methanol was stimulated by the addition of tungsten (W) without formate accumulation. Not only biomass yield but also the total products yield (biomass and formate) on carbon basis increased up to 11.50-fold and 1.28-fold respectively in W-added medium. Furthermore, a significant decrease in CO2 yield from formate was observed in the W-added cells, which indicates that W might have affected the activity of certain enzymes involved in carbon assimilation as well as formate dehydrogenase (FDH). The results of this study suggest that M. alcaliphilum 20Z is a promising model system for studying the physiology of the aerobic methanotroph and for enabling its industrial use for methane conversion through high cell density cultivation.

Bioprocessing strategies to increase the protein fraction of Rhizopus oryzae biomass using fish industry sidestreams.

The sidestreams produced during fish processing end in a separation tank where the resulting fractions follow biogas production or wastewater treatment. These streams can alternatively be used for production of protein-rich fungal biomass for e.g. fish feed applications, a product in increasing demand. These streams and upper streams originated during fish processing were used in this study for production of biomass using the edible filamentous fungus Rhizopus oryzae. The COD of the streams varied between 11 and 54 kg/m3 and, after fungal conversion of organic matter into protein-rich biomass and separation, a reduction of 34-69% was achieved. The stream origin had an effect on the final production and composition of the fungal biomass: 480 kg of biomass containing 33% protein per ton of COD were produced after cultivation in the separation tank streams, while 220 kg of biomass containing 62% protein per ton of COD were produced in upper sidestreams with lower amounts of suspended solids. Changing the initial pH (6.1-6.5) to 5.0 had a negative influence on the amount of biomass produced while medium supplementation had no influence. Thus, fish processing sidestreams can be diverted from biogas production and wastewater treatment to the production of protein-rich biomass for feed applications.

Dose-Dependent Retention of Omega-3 Fatty Acids by Black Soldier Fly Larvae (Diptera: Stratiomyidae).

Black soldier fly larvae, Hermetia illucens (L.), are used to convert organic waste streams into insect-based animal feeds. We tested their ability to retain alpha-linolenic acid (ALA), eicosapentaenoic acid (EPA), and docosahexaenoic acid (DHA) from feeding substrates, which has important implications for their use in aquaculture. When supplementing a chicken feed diet with increasing concentrations of salmon oil (0-42%) over an increasing number of days (0-8), the concentrations of the three omega-3 acids in larvae increased significantly. Larval survival and biomass accumulation were not affected. Supplementing a chicken feed diet with increasing concentrations (0-14%) of Tetraselmis chui Butcher (Chlorodendrales: Chlorodendraceae) microalgae paste also significantly increased ALA and EPA contents of the harvested larvae. However, microalgae also decreased survival, harvested biomass, and individual growth of larvae feeding on the diet with the highest supplement concentration (14%). DHA was not detected in any microalgae diet or subsequent larval tissue samples. All three omega-3 polyunsaturated fatty acids tested in this study were accumulated in dose-dependent manner, with quadratic, and occasionally linear, equations providing the best description of the observed relationships. There were significant negative correlations between several fatty acids, indicating that they may replace one another in living larvae. Our findings confirm that black soldier fly larvae can retain ingested fatty acids and change fatty acid profiles in their tissues accordingly. However, optimizing nutrient content of harvestable larvae is likely to be more complicated than simply enriching their diets with omega-3 fatty acids.

Recent advancement in lignin biorefinery: With special focus on enzymatic degradation and valorization.

With the intensive development of lignocellulosic biorefineries to produce fuels and chemicals from biomass-derived carbohydrates, lignin was generated at a large quantity every year. Therefore, lignin has received increasing attention as an abundant aromatics resource in terms of research and development efforts for value-added chemicals production. In this review, studies about lignin degradation especially the crucial enzymes involved and the reaction mechanism were substantially discussed, which provided the molecular basis of lignin biodegradation. Then, the latest improvements in lignin valorization by biological methods were summarized and case studies about value-added compounds from lignin were introduced. Afterwards, challenges, opportunities and prospects regarding biorefinery of lignin were presented.

Development of Rhodococcus opacus as a chassis for lignin valorization and bioproduction of high-value compounds.

The current extraction and use of fossil fuels has been linked to extensive negative health and environmental outcomes. Lignocellulosic biomass-derived biofuels and bioproducts are being actively considered as renewable alternatives to the fuels, chemicals, and materials produced from fossil fuels. A major challenge limiting large-scale, economic deployment of second-generation biorefineries is the insufficient product yield, diversity, and value that current conversion technologies can extract from lignocellulose, in particular from the underutilized lignin fraction. Rhodococcus opacus PD630 is an oleaginous gram-positive bacterium with innate catabolic pathways and tolerance mechanisms for the inhibitory aromatic compounds found in depolymerized lignin, as well as native or engineered pathways for hexose and pentose sugars found in the carbohydrate fractions of biomass. As a result, R. opacus holds potential as a biological chassis for the conversion of lignocellulosic biomass into biodiesel precursors and other value-added products. This review begins by examining the important role that lignin utilization will play in the future of biorefineries and by providing a concise survey of the current lignin conversion technologies. The genetic machinery and capabilities of R. opacus that allow the bacterium to tolerate and metabolize aromatic compounds and depolymerized lignin are also discussed, along with a synopsis of the genetic toolbox and synthetic biology methods now available for engineering this organism. Finally, we summarize the different feedstocks that R. opacus has been demonstrated to consume, and the high-value products that it has been shown to produce. Engineered R. opacus will enable lignin valorization over the coming years, leading to cost-effective conversion of lignocellulose into fuels, chemicals, and materials.

Statistical Optimization of 1,3-Propanediol (1,3-PD) Production from Crude Glycerol by Considering Four Objectives: 1,3-PD Concentration, Yield, Selectivity, and Productivity.

This study investigated the biological conversion of crude glycerol generated from a commercial biodiesel production plant as a by-product to 1,3-propanediol (1,3-PD). Statistical analysis was employed to derive a statistical model for the individual and interactive effects of glycerol, (NH4)2SO4, trace elements, pH, and cultivation time on the four objectives: 1,3-PD concentration, yield, selectivity, and productivity. Optimum conditions for each objective with its maximum value were predicted by statistical optimization, and experiments under the optimum conditions verified the predictions. In addition, by systematic analysis of the values of four objectives, optimum conditions for 1,3-PD concentration (49.8 g/L initial glycerol, 4.0 g/L of (NH4)2SO4, 2.0 mL/L of trace element, pH 7.5, and 11.2 h of cultivation time) were determined to be the global optimum culture conditions for 1,3-PD production. Under these conditions, we could achieve high 1,3-PD yield (47.4%), 1,3-PD selectivity (88.8%), and 1,3-PD productivity (2.1/g/L/h) as well as high 1,3-PD concentration (23.6 g/L).

Biological conversion of biogas to methanol using methanotrophs isolated from solid-state anaerobic digestate.

The aim of this work was to isolate methanotrophs (methane oxidizing bacteria) that can directly convert biogas produced at a commercial anaerobic digestion (AD) facility to methanol. A methanotrophic bacterium was isolated from solid-state anaerobic digestate. The isolate had characteristics comparable to obligate methanotrophs from the genus Methylocaldum. This newly isolated methanotroph grew on biogas or purified CH4 and successfully converted biogas from AD to methanol. Methanol production was achieved using several methanol dehydrogenase (MDH) inhibitors and formate as an electron donor. The isolate also produced methanol using phosphate with no electron donor or using formate with no MDH inhibitor. The maximum methanol concentration (0.43±0.00gL(-1)) and 48-h CH4 to methanol conversion (25.5±1.1%) were achieved using biogas as substrate and a growth medium containing 50mM phosphate and 80mM formate.

Value-added processing of crude glycerol into chemicals and polymers.

Crude glycerol is a low-value byproduct which is primarily obtained from the biodiesel production process. Its composition is significantly different from that of pure glycerol. Crude glycerol usually contains various impurities, such as water, methanol, soap, fatty acids, and fatty acid methyl esters. Considerable efforts have been devoted to finding applications for converting crude glycerol into high-value products, such as biofuels, chemicals, polymers, and animal feed, to improve the economic viability of the biodiesel industry and overcome environmental challenges associated with crude glycerol disposal. This article reviews recent advances of biological and chemical technologies for value-added processing of crude glycerol into chemicals and polymers, and provides strategies for addressing production challenges.

Biological conversion of methane to liquid fuels: status and opportunities.

Methane is the main component of natural gas and biogas. As an abundant energy source, methane is crucial not only to meet current energy needs but also to achieve a sustainable energy future. Conversion of methane to liquid fuels provides energy-dense products and therefore reduces costs for storage, transportation, and distribution. Compared to thermochemical processes, biological conversion has advantages such as high conversion efficiency and using environmentally friendly processes. This paper is a comprehensive review of studies on three promising groups of microorganisms (methanotrophs, ammonia-oxidizing bacteria, and acetogens) that hold potential in converting methane to liquid fuels; their habitats, biochemical conversion mechanisms, performance in liquid fuels production, and genetic modification to enhance the conversion are also discussed. To date, methane-to-methanol conversion efficiencies (moles of methanol produced per mole methane consumed) of up to 80% have been reported. A number of issues that impede scale-up of this technology, such as mass transfer limitations of methane, inhibitory effects of H2S in biogas, usage of expensive chemicals as electron donors, and lack of native strains capable of converting methane to liquid fuels other than methanol, are discussed. Future perspectives and strategies in addressing these challenges are also discussed.

Extraction and purification of a luminiferous substance from the luminous mushroom Mycena chlorophos.

Bioluminescence has attracted considerable attention in the area of biophysics, primarily because the phenomenon can fundamentally be interpreted as the conversion of chemical to light energy. Although the molecular mechanisms underlying luminescence have been studied extensively in fireflies and bacteria, few studies have been undertaken in luminous fungi. This relative lack of information is likely due to the absence of a common and species-specific reaction-type in the luminous fungi examined to date. We recently succeeded in extracting, for the first time, a luminiferous substance from the fungus Mycena chlorophos. The substance was purified and characterized according to its chemical and optical properties. It is hoped that this information will facilitate the clarification of a novel molecular mechanism in fungal bioluminescence systems.