Why don't dental teams routinely discuss dentine hypersensitivity during consultations? A qualitative study informed by the Theoretical Domains Framework.

AIM: Although dentine hypersensitivity is widespread, can cause substantial pain and impact quality of life, it is not routinely discussed during dental consultations. This qualitative study aimed to develop an understanding of the barriers and facilitators to these discussions. MATERIALS AND METHODS: Using the Theoretical Domains Framework to shape the topic guide, N = 7 online focus groups were organized with a total N = 40 participants comprising experienced dentists, dental foundation trainees and dental care professionals. Inductive and deductive thematic analyses of the anonymized, transcribed focus group conversations were undertaken. RESULTS: An attitude-behaviour gap was observed in dental teams' accounts. Although they saw it as part of their professional role to routinely discuss sensitivity, and believed that such conversations were 'an easy win', in practice they experienced several behavioural barriers that hindered these conversations from taking place. These included competing priorities, a perceived lack of seriousness and assessment of dentine hypersensitivity and practical issues such as time. CONCLUSIONS: Systemic (e.g., lack of time and training, professional culture) and behavioural (e.g., dental teams' belief that conversations should take place only with patients likely to be adherent) barriers to dentine hypersensitivity conversations explain why these conversations do not routinely take place.

Shear Bond Strength of Adhesives Placed following Selective Removal of Red-Fluorescing Carious Dentine in vitro.

Red-fluorescing dentine indicates bacterial contamination [Caries Res 2002; 36: 315-319]. We investigated effect of removal of red fluorescent dentine caries on shear bond strength and fracture mode of 4 adhesive approaches. Sixty-five carious teeth and 50 noncarious controls were distributed into 4 groups: Clearfil™ self-etch (CSE), OptiBond™ FL total etch (OTE), Scotchbond™ Universal total etch (STE) and self-etch (SSE). Samples were excited at 405 nm and viewed through 530 nm filter. Carious samples were ground flat exposing strongly red-fluorescing (StrongRF) dentine, on which a composite cylinder was placed, using one of 4 adhesives. After 22 h in water, shear bond strength and fracture mode were analysed. StrongRF was removed; composite cylinders were placed on weakly red-fluorescing (WeakRF) dentine and tested as described above. Finally, red-fluorescing dentine was removed, and composite cylinders were placed on non-fluorescing (NonRF) dentine and tested. Composites were placed at 3 corresponding heights in controls. After 22 h in water, shear bond strength testing and fracture mode analysis were performed. Differences were tested using Mann-Whitney or Wilcoxon tests (p ≤0.05). Median (Q1, Q3) shear bond strength on StrongRF was SSE 14.4 (9.2, 18.2) MPa >CSE 10.2 (6.4, 17.3) MPa >STE 9.1 (6.9, 11.2) MPa >OTE 6.8 (4.0, 10.8) MPa. Shear bond strength increased statistically significantly for all adhesives on WeakRF: SSE 19.8 (13.6, 24.3) MPa >STE 19.5 (12.7, 23.1) MPa >CSE 17.5 (12.0, 22.5) MPa >OTE 15.8 (11.9, 20.9) MPa. Only STE 25.6 (22.4, 29.1) MPa and CSE 22.1 (17.6, 24.6) MPa were significantly different on NonRF compared to WeakRF. For controls tested at corresponding depths, superficial shear bond strength was OTE 18.7 (16.0, 22.1) MPa >STE 18.4 (12.0, 25.9) MPa >CSE 18.1 (12.7, 20.7) MPa >SSE 13.0 (9.6, 17.8) MPa. This was significantly higher compared to StrongRF except for SSE. Central shear bond strength was not significantly different to WeakRF, deep shear bond strength was significantly lower for SSE and CSE but higher for OTE compared to carious. Conclusion: StrongRF dentine should be removed for higher shear bond strength, but WeakRF dentine can often be preserved without compromising adhesive bond strength.

Sensory nerves, but not sympathetic nerves, promote reparative dentine formation after dentine injury via CGRP-mediated angiogenesis: An in vivo study.

AIM: Dental pulp is richly innervated by nerve fibres, which are mainly involved in the sensation of pain. Aside from pain sensation, little is known regarding the role of dental innervation in reparative dentine formation. We herein generated a mouse model of experimental dentine injury to examine nerve sprouting within the odontoblast and subodontoblastic layers and investigated the potential effects of this innervation in reparative dentinogenesis. METHODOLOGY: Mouse tooth cavity model (bur preparation + etching) was established, and then nerve sprouting, angiogenesis and reparative dentinogenesis were determined by histological and immunofluorescent staining at 1, 3, 7, 14 and 28 days postoperatively. We also established the mouse-denervated molar models to determine the role of sensory and sympathetic nerves in reparative dentinogenesis, respectively. Finally, we applied calcitonin gene-related peptide (CGRP) receptor antagonist to analyse the changes in angiogenesis and reparative dentinogenesis. RESULTS: Sequential histological results from dentine-exposed teeth revealed a significant increase in innervation directly beneath the injured area on the first day after dentine exposure, followed by vascularisation and reparative dentine production at 3 and 7 days, respectively. Intriguingly, abundant type H vessels (CD31+ Endomucin+ ) were present in the innervated area, and their formation precedes the onset of reparative dentine formation. Additionally, we found that sensory denervation led to blunted angiogenesis and impaired dentinogenesis, while sympathetic denervation did not affect dentinogenesis. Moreover, a marked increase in the density of CGRP+ nerve fibres was seen on day 3, which was reduced but remained elevated over the baseline level on day 14, whereas the density of substance P-positive nerve fibres did not change significantly. CGRP receptor antagonist-treated mice showed similar results as those with sensory denervation, including impairments in type H angiogenesis, which confirms the importance of CGRP in the formation of type H vessels. CONCLUSIONS: Dental pulp sensory nerves act as an essential upstream mediator to promote angiogenesis, including the formation of type H vessels, and reparative dentinogenesis. CGRP signalling governs the nerve-vessel-reparative dentine network, which is mostly produced by newly dense sensory nerve fibres within the dental pulp.

Biomimetic pulp scaffolds prepared from extracellular matrix derived from stem cells from human exfoliated deciduous teeth promote pulp-dentine complex regeneration.

AIM: To evaluate the role of biomimetic pulp scaffolds derived from the extracellular matrix derived of stem cells from human exfoliated deciduous teeth (SHED-ECM-PS) in promoting pulp-dentine complex regeneration. METHODOLOGY: SHED-ECM-PS was prepared through cell aggregation and decellularization techniques. Histological and immunofluorescence analyses, scanning electron microscopy, and DNA quantification assays were used to characterize the SHED-ECM-PS. Additionally, a tooth slice implantation model was established to evaluate the effects of SHED-ECM-PS on regeneration of the pulp-dentine complex in vivo. Extraction medium for SHED-ECM-PS was prepared, and its effect on bone marrow mesenchymal stem cells (BMMSCs) was assessed in vitro. Cell counting kit-8 and Ki-67 staining assays were performed to determine cell proliferation. The rate of apoptosis was evaluated by flow cytometry. Wound healing and transwell assays were conducted to evaluate cell migration. Alizarin red S staining was performed to examine mineralized nodule formation. Western blotting was used to detect the expression of osteogenic and odontogenic markers. The results were analysed using an independent two-tailed Student's t-test. p < .05 was considered statistically significant. RESULTS: SHED-ECM-PS was successfully constructed, exhibiting a striped dental pulp-like shape devoid of nuclear structures or DNA components, and rich in fibronectin, collagen I, DMP1 and DSPP. Notably, SHED-ECM-PS showed no impact on the proliferation or apoptosis of BMMSCs. Histological analysis revealed that dental pulp fibroblasts formed an interwoven mesh in the root canal, and angiogenesis was observed in the SHED-ECM-PS group. Moreover, a continuous, newly formed tubular dentine layer with polarized odontoblast-like cells was observed along the inner wall of the root canal. SHED-ECM-PS promoted the migration, polar alignment and mineralized nodule formation of BMMSCs and specifically elevated the expression levels of odontogenic markers, but not osteogenic markers, compared with the control group in vitro. CONCLUSION: SHED-ECM-PS exhibited no cytotoxicity and promoted pulp-dentine complex regeneration in vivo as well as cell migration and odontogenic differentiation of BMMSCs in vitro. These findings provide evidence that SHED-ECM-PS, as a novel biological scaffold, has the potential to improve the outcomes of REPs.

Bonding performance and interfacial adaptation of modern bulk-fill restorative composites after aging in artificial saliva: an in vitro study.

OBJECTIVES: This study aimed at comparing the microtensile bond strength (MTBS) and interfacial adaptation of a modern self-curing and a light-curing restorative bulk-fill composite to a conventional composite applied with the layering technique. METHODS: Forty-eight occlusal cavities were divided in three main groups (16/group) based on tested materials: (i) STELA, bulk-fill self-curing restorative (STELA, SDI Ltd.); (ii) 3 M-BULK, bulk-fill composite (Filtek One Bulk-Fill, 3 M Oral Care); and (iii) 3 M-CTR, a conventional composite (Filtek Supreme XTE, 3 M Oral Care). These were used in combination with their adhesives in self-etch (SE) or etch-and-rinse (ER) mode. Specimens stored in artificial saliva (24 h or 12 months) were evaluated for MTBS and fractography. The interfacial analysis was performed through confocal microscopy. ANOVA and Fisher's LSD post hoc tests were performed with a level of significance of 5%. RESULTS: All the tested materials applied in ER mode presented (24 h) greater bond strength than in SE mode. Although all materials showed a significant drop in the bond strength after prolonged storage, STELA showed the highest bonding performance and interfaces with few gaps. 3 M-BULK had the lowest bond strength and an interface with several voids and gaps. CONCLUSIONS: All materials were affected by interface degradation and bonding reduction over prolonged aging. However, their use in combination with adhesives applied in ER mode may offer greater immediate bonding performance. CLINICAL RELEVANCE: The use of restorative light-curing bulk-fill composites may generate gaps at the bonding interface and voids. STELA may represent a suitable alternative to avoid such issues.

The Reparative Function of MMP13 in Tertiary Reactionary Dentinogenesis after Tooth Injury.

MMP13 gene expression increases up to 2000-fold in mineralizing dental pulp cells (DPCs), with research previously demonstrating that global MMP13 deletion resulted in critical alterations in the dentine phenotype, affecting dentine-tubule regularity, the odontoblast palisade, and significantly reducing the dentine volume. Global MMP13-KO and wild-type mice of a range of ages had their molar teeth injured to stimulate reactionary tertiary dentinogenesis. The response was measured qualitatively and quantitatively using histology, immunohistochemistry, micro-CT, and qRT-PCR in order to assess changes in the nature and volume of dentine deposited as well as mechanistic links. MMP13 loss affected the reactionary tertiary dentine quality and volume after cuspal injury and reduced Nestin expression in a non-exposure injury model, as well as mechanistic links between MMP13 and the Wnt-responsive gene Axin2. Acute pulpal injury and pulp exposure to oral fluids in mice teeth showed upregulation of the MMP13 in vivo, with an increase in the gene expression of Mmp8, Mmp9, and Mmp13 evident. These results indicate that MMP13 is involved in tertiary reactionary dentine formation after tooth injury in vivo, potentially acting as a key molecule in the dental pulp during dentine-pulp repair processes.

A newly developed kit for dental apical root resorption detection: efficacy and acceptability.

OBJECTIVES: To determine the efficacy of a newly developed kit in dentine sialophosphoprotein (DSPP) detection and compare it with enzyme-linked immunosorbent assay (ELISA). User acceptance was also determined. MATERIALS AND METHODS: This cross-sectional study consisted of 45 subjects who were divided into 3 groups based on the severity of root resorption using radiographs: normal (RO), mild (RM), and severe (RS). DSPP in GCF samples was analyzed using both methods. Questionnaires were distributed to 30 orthodontists to evaluate future user acceptance. RESULTS: The sensitivity and specificity of the kit were 0.98 and 0.8 respectively. The DSPP concentrations measured using ELISA were the highest in the RS group (6.33 ± 0.85 ng/mL) followed by RM group (3.77 ± 0.36 ng/mL) and the RO group had the lowest concentration (2.23 ± 0.55 ng/mL). The new kit portrayed similar results as the ELISA, the optical density (OD) values were the highest in the RS group (0.62 ± 0.10) followed by RM group (0.33 ± 0.03) and the RO group (0.19 ± 0.06). The differences among all the groups were statistically significant (p < 0.05) for both methods. The Pearson correlation coefficient showed a statistically significant (p < 0.001) strong and positive correlation between DSPP concentrations and OD values. CONCLUSIONS: The new kit was validated to detect the colour intensities of different severity of root resorptions. Most of the responses to the survey were positive towards the new kit for being a safer and simpler method to detect apical root resorption.

Study of secondary dentine deposition in central incisors as an age estimation method for adults.

This work aimed to assess the pulp/tooth area ratio's utility in the upper central incisors using orthopantomograms. A convenience sample of 801 adult patient orthopantomograms was studied. Image J® software was used to measure the pulp/tooth area ratio, and a regression model was developed. Our results conclude that the methodology assessing upper incisors' pulp/tooth area ratio using orthopantomograms can lead to age overestimation and statistically significant differences between chronological and estimated age. For those over 50, no correlation between pulp/tooth area ratio and chronological age was found, suggesting that this may be the upper limit of this technique in this population. This methodology may not be suitable for age estimation, particularly in older adults.

The first report of the presence of collagen X in mammalian dentinal matrix.

Collagen X is an extracellular matrix protein, usually found in the hypertrophic cartilage destined to be mineralized. It is intimately associated with the mineralization process of the mammalian hard tissues, and particularly, regulating the compartmentalization of matrix components. Despite the fact that the dentine of the tooth is highly mineralized, there are no previous reports to indicate the presence of collagen X in this connective tissue. Here we report, for the first time, its presence in mammalian dentine based on micromorphological and immunohistochemical data. We hypothesize that the collagen X in dentine may in the long term arrest the progression of the mineralization front towards the soft tissue components of the pulp that are not destined to be mineralized.

3D segmentation of dental crown for volumetric age estimation with CBCT imaging.

In adult dental age estimation, segmentation of dental volumetric information from different tooth parts using cone-beam computed tomography (CBCT) has proven beneficial in improving the regression model reliability. This segmentation method can be expanded in the crown part since the volumetric information in the crown is affected by attrition in the enamel and secondary dentine in the dentine and pulp chamber. CBCT scans from 99 patients aged between 20 and 60 were collected retrospectively. A total of 80 eligible teeth for each tooth type were used in this study. The enamel to dentine volume ratio (EDVR), pulp to dentine volume ratio (PDVR) and sex were used as independent variables to predict chronological age (CA). The EDVR was not affected by PDVR. The highest R2 was calculated from the maxillary canine (R2 = 0.6). The current approach in crown segmentation has proven to improve model performance in anterior maxillary teeth.

Dentine biomodification by sulphonamides pre-treatment: bond strength, proteolytic inhibition, and antimicrobial activity.

We evaluated the effects of dentine biomodification after pre-treatment with two sulphonamide carbonic anhydrase inhibitors (CAIs) of the N-[4-sulphamoylphenethylcarbamoyl]benzenesulphonamide type, investigating matrix metalloproteases activity, resin-dentine micro tensile bond strength, dentine surface wettability, and antimicrobial activities. Ninety-five sound-extracted human molars were selected for the study. Inhibitory effects were evaluated by gelatinase and collagenase activity tests and collagen degradation FT-IR spectroscopic analysis. Pre-treatment with the two CAIs kept the micro tensile values after 12 months of storage (32.23 ± 5.95) and cariogenic challenge (34.13 ± 2.71) similar to the initial, pre-treatment values (33.56 ± 4.34). A decreased Streptococcus mutans biofilm formation on dentine surfaces and antibacterial activity against planktonic bacteria were observed after CAI treatment. Dentine pre-treatment with sulphonamide CAIs maintained adhesion strength stability, allowed better dentine wettability, maintained matrix collagen, and showed anti-S. mutans activity.

Dentine thickness in maxillary fused molars depends on the fusion type: An ex vivo micro-computed tomography study.

AIM: The present study aimed to determine and compare the dentine thickness around the root canals of maxillary molars with fusion using micro-computed tomography (micro-CT). METHODOLOGY: A total of 120 fused maxillary molars having more than a single canal with distinct canal orifices near the cementoenamel junction were selected from a pool of extracted maxillary molars, which were scanned on a micro-CT device (SkyScan 1172, Bruker-microCT). The minimum dentine thickness around the root canals in furcal direction was measured using CTAn software (v.1.18.8 Bruker-microCT) at each millimetre. The specimens were grouped according to their fusion type, and dentine thickness around the canals was compared. The data were statistically analysed using anova and post hoc Tukey-Kramer tests following an assessment of the normality of their distribution with the Kolmogorov-Smirnov test (p < .05). RESULTS: Dentine thickness showed a statistically significant decrease at 2 mm apical to the orifice level irrespective of fusion type. The minimum dentine thickness values were detected around the second mesiobuccal canal as 0.30 mm at 6 mm below orifice. Dentine thickness around the mesiobuccal canal was significantly greater in fusion type 1 than those of types 2 and 3 (p < .05), while those of distobuccal and palatal canals were significantly thinner in type 3 fusion compared with type 1 or 6 (pDentine thickness showed a statistically significant decrease at 2 mm apical to the orifice level  irrespective of fusion type. The minimum dentine thickness values were detected around the second mesiobuccal canal as 0.30 mm at 6 mm below orifice. Dentine thickness around the mesiobuccal canal was significantly greater in fusion type 1 than those of types 2 and 3 ( CONCLUSION: Minimum dentine thickness values at the danger zone of distobuccal and palatal canals change according to the fusion type in fused maxillary second molars.

LAMA5-inspired adhesive dodecapeptide facilitates efficient dentine regeneration: An in vitro and in vivo study.

AIM: The primary goal of this study was to investigate the potential effects of A5G81 in inducing reparative dentine (RD) formation both in vitro and in vivo. METHODOLOGY: Cell adhesion was observed by crystal violet staining and quantified by Sodium Dodecyl Sulphate (SDS) extraction. Cell proliferation was investigated using Cell Counting Kit-8 (CCK-8) assay. Spreading of cytoskeleton was visualized using immunofluorescence staining. Protein expression level of Akt signalling pathway was compared in a human Akt pathway phosphorylation array. Genes that were up or downregulated by A5G81 were identified by RNA sequencing. The mRNA expression of odontoblastic markers was detected by quantitative real-time polymerase chain reaction (qPCR). Moreover, mineralization of human dental pulp cells (hDPCs) was visualized by alizarin red staining and quantified using cetylpyridinium chloride (CPC). A direct pulp-capping model was established in SD rats and the RD formation at 2 weeks after operation was observed using HE staining. RESULTS: A5G81 (optimal coating concentration: 0.5 mg/mL) promoted hDPCs adhesion and proliferation to a level that was similar to Type I collagen (COL-1). Meanwhile, A5G81 activated Akt signalling pathway, albeit to a lesser extent than COL-1. An inhibition test indicated that A5G81 induced hDPCs adhesion by activating PI3K pathway. A5G81 induced the expression of ECM remodelling genes and odontoblastic genes, which were demonstrated by RNA-seq and qPCR, respectively. In addition, A5G81 efficiently accelerated the mineralization of hDPCs in both immobilized and soluble forms, a property that makes it more applicable in dental clinic. Finally, the pulp-capping study in rats suggested that use of A5G81 could successfully induce the formation of RD within 2 weeks. CONCLUSION: Coating of A5G81 to non-tissue culture-treated polystyrene facilitates spreading, proliferation and differentiation of hDPCs, resulting in rapid RD formation in artificially exposed pulp.

The N6-methyladenosine demethylase FTO is required for odontoblast differentiation in vitro and dentine formation in mice by promoting RUNX2 exon 5 inclusion through RBM4.

AIM: Fat mass and obesity-associated (FTO) protein, the first discovered N6-methyladenine (m6A) demethylase, played positive roles in bone formation. In this study, the aim was to investigate the function and potential mechanism of Fto in dentine formation. METHODOLOGY: In vivo model, postnatal 12-day (PN12), 4-week-old (4 wk), 6-week-old (6 wk) healthy male C57BL/6J were randomly divided into Fto knockout (Fto-/- ) mice and wild-type (WT) littermates according to their genotypes, with 3-5 mice in each group. The mandibles of Fto-/- mice and WT control littermates were isolated for analysis by micro-computed tomography (micro-CT), 3-dimensional reconstruction and Haematoxylin-eosin (HE) staining. In vitro, mouse dental papilla cells (mDPCs) and human dental stem pulp cells (hDPSCs) were cultured with odontogenetic medium to evaluate differentiation capacity; expression levels of odontoblastic related genes were evaluated using quantitative real-time polymerase chain reaction (qRT-PCR). The inclusion levels of Runt-related transcription factor 2 (RUNX2) exon 5 in mDPCs and hDPSCs were detected by semiquantitative real-time polymerase chain reaction (RT-PCR). The RNA binding motif protein 4 (RBM4) m6A site was verified through m6A methylated RNA immunoprecipitation (MeRIP) and the stability of RBM4 mRNA influenced by FTO knockdown was measured by mRNA stability assay. Differences with p values < .05 were regarded as statistically significant. RESULTS: We discovered that Fto-/- mice showed significant dentine formation defects characterized by widened pulp cavity, enlarged pulp-tooth volume ratio, thinned dentine and pre-dentine layer of root (p < .05). Fto-/- mDPCs and FTO-silencing hDPSCs not only exhibited insufficient mineralization ability and decreased expression levels of odontoblastic mineralization related genes (p < .05), but showed significantly reduced Runx2 exon 5 inclusion level (p < .05). FTO knockdown increased the m6A level of RBM4 and destabilized the mRNA of RBM4, thus contributing to the reduced RBM4 expression level. Moreover, Rbm4 overexpression in Fto-/- mDPCs can partly restore Runx2 exon 5 inclusion level and the differentiation ability disrupted by Fto knockout. CONCLUSION: Thus, within the limitations of this study, the data suggest that FTO promotes odontoblastic differentiation during dentine formation by stabilizing RBM4 mRNA to promote RUNX2 exon 5 inclusion.

The combined treatment of fiber post and root canal by the Er:YAG laser enhances the bond strength of composite reconstruction.

Fiber post bonding failure remains an issue during crown restoration procedures. This experiment examines the bonding effect of combined Er:YAG laser treatment on both root canal and fiber post. Sixty extracted mandibular first premolars were randomly selected and divided into 6 groups (n = 10 per group): G1 (control group): root canal with 2.5% NaClO treatment, no treatment of fiber post; G2: root canal with 2.5% NaClO treatment and fiber post with airborne-particle abrasion; G3: root canal with Er:YAG laser treatment and fiber post with airborne-particle abrasion; G4: root canal with Er:YAG laser treatment, no treatment of fiber post; G5: root canal with 2.5% NaClO treatment, fiber post with Er:YAG laser irradiation; G6: combined Er:YAG laser irradiation of both root canal and fiber post. An Er:YAG laser with a wavelength of 2940 nm was used to treat the fiber post (4.5 W, 450 mJ, 10 Hz for 60 s at 100-µs pulse duration with 100% water cooling) and the root canal (1.5 W, 150 mJ, 10 Hz for 60 s at 100-µs pulse duration with 100% water cooling). When the root canal was treated with the laser, the fiber tip was inserted into the root canal to make a spiral reciprocating motion. Bond strength was analyzed by a micro push-out test. Data were analyzed using both the Tukey test and two-way ANOVA (α = 0.05). Failure modes were observed and counted through a stereo microscope. The root canal and fiber post surface analysis was performed using SEM. The bond strength of G3 and G6 were significantly enhanced compared to those of the other groups (p < 0.05). The SEM analysis showed that the smear layers of groups with root canals subjected to Er:YAG laser irradiation were significantly reduced compared to those of the control group (G1). In groups with fiber posts treated with Er:YAG laser irradiation, the surfaces of the fiber posts exhibited greater surface roughness and a certain degree of epoxy matrix removal. Through the combined Er:YAG laser irradiation of both root canal and fiber post, the bond strength between them was significantly enhanced, which was superior to the individual treatment of either fiber posts or root canal.

Biomimetic approaches and materials in restorative and regenerative dentistry: review article.

Biomimetics is a branch of science that explores the technical beauty of nature. The concept of biomimetics has been brilliantly applied in famous applications such as the design of the Eiffel Tower that has been inspired from the trabecular structure of bone. In dentistry, the purpose of using biomimetic concepts and protocols is to conserve tooth structure and vitality, increase the longevity of restorative dental treatments, and eliminate future retreatment cycles. Biomimetic dental materials are inherently biocompatible with excellent physico-chemical properties. They have been successfully applied in different dental fields with the advantages of enhanced strength, sealing, regenerative and antibacterial abilities. Moreover, many biomimetic materials were proven to overcome significant limitations of earlier available generation counterpart. Therefore, this review aims to spot the light on some recent developments in the emerging field of biomimetics especially in restorative and regenerative dentistry. Different approaches of restoration, remineralisation and regeneration of teeth are also discussed in this review. In addition, various biomimetic dental restorative materials and tissue engineering materials are discussed.

Reparative dentin formation as a possible factor influencing the penetrability of dentin in human teeth with apical periodontitis: an ex vivo study.

BACKGROUND: There is still a lack of knowledge regarding the permeability and configuration of infected root dentin. The aim of this ex vivo study was to compare the dentin penetrability of healthy teeth and necrotic teeth with apical periodontitis by evaluating the penetration of sodium hypochlorite (NaOCl) and to analyze the histopathological features of root dentin. METHODS: Forty-eight molars were collected and divided into two groups. The clinical diagnosis for one group was pulp necrosis with apical periodontitis and the pulp and periapex were normal in the other group. Forty-eight straight roots were divided into two groups: infected and healthy. First, all root canals were stained with 2% methylene blue to visualize penetration after standard root canal instrumentation and irrigation. Transverse sections were obtained, and the dye penetration parameters were measured. The cross sections were processed to 20-30 µm and stained with hematoxylin and eosin for observation of the histopathological changes in the root dentin. RESULTS: The maximum penetration depth, median penetration depth and penetration percentage of NaOCl solutions, in infected root canals were significantly lower than those in healthy root canals. The histopathological analysis showed that the frequency of reparative dentin formation in infected root canals was significantly greater than that in healthy root canals. CONCLUSIONS: The dentin penetrability of teeth with necrotic teeth and apical periodontitis was more superficial during root canal irrigation than that of healthy teeth. The histopathological changes in infected radicular dentin, namely the formation of reparative dentin, might be associated with the lower permeability of dentin tubules in human teeth with apical periodontitis.

The prevalence and predictive factors of dentine hypersensitivity among adults in Turkey.

AIM: This study sought to determine the prevalence of dentine hypersensitivity (DH) among adults in Turkey. Also, to ascertain the association between DH and both etiological predictors and demographic patient characteristics. MATERIAL METHOD: Using a questionnaire and thermal and evaporative tests, 259 women and 209 men in the age range of 18 to 72 were analyzed. Individually, a clinical evaluation of DH signs was conducted. The DMFT index, gingival index, and gingival bleeding were reported for each subject. The gingival recession and tooth wear of sensitive teeth were also evaluated. Pearson Chi-square test was used to compare categorical data. Logistic Regression Analysis was used to examine the risk factors of DH. Data with dependent categorical variables were compared using the McNemar-Browker test. The significance level was p < 0.05. RESULTS: The average age of the population was 35.6 years. In the present study, a total of 12,048 teeth were analyzed. 1755 had thermal hypersensitivity (14.57%), while 470 experienced evaporative hypersensitivity (3.9%). The incisors were the teeth most impacted by DH, whereas the molars were the least affected. Exposure to cold air and sweet foods, gingival recession, and the presence of noncarious cervical lesions were all strongly linked to DH (Logistic regression analysis, p < 0.05). The cold stimulus increases sensitivity more than the evaporation stimulus. CONCLUSION: Significant risk factors for both thermal and evaporative DH include cold air, consumption of sweet food, presence of noncarious cervical lesions, and gingival recession. More epidemiological research in this area is still required to fully characterize the risk factors and implement the most effective preventive interventions.

Type I Dentin Dysplasia: The Literature Review and Case Report of a Family Affected by Misrecognition and Late Diagnosis.

Background and Objectives: Type I dentin dysplasia (DD-I) is a rare genetic disorder with autosomal dominant or recessive inheritance at risk of late or long-misunderstood diagnosis because the teeth, compared to other degenerative dentin diseases, do not have coronal defects and/or alterations but only at the root level (absent, conical, pointed roots, and obliterated pulp canals). The first radiographic suspicion often occurs only in case of sudden mobility and/or abscesses of the permanent teeth. Genetic tests confirm the diagnosis. Case Presentation: This case report describes the oral and radiographic characteristics of two siblings, 12 and 10 years old, a male and a female, at an early age affected by DD-I, whose diagnosis was made for a first orthodontic visit. The father and the older child had already undergone dental and orthodontic treatments, respectively, without the disease being suspected by the dentist. Results: Genetic tests support the diagnosis of DD-I. Following the diagnosis, the patients began a process of close periodic checks every 3-4 months to monitor their situation. The male child lost upper lateral incisors, which were then replaced with a light nylon removable prosthesis. Conclusions: The ability to recognize the radiographic features characteristic of DD-I is very important to avoid prejudicial diagnostic delays and to be able to plan the long-term treatment of these patients better, especially when the pathology was primarily misrecognized in the family.

Dentine surface modification and remineralization induced by bioactive toothpastes.

OBJECTIVE: In this study, dentine surface was analysed through Environmental-scanning-electron-microscopy (ESEM) with energy-dispersive-X-ray-spectrometry (EDX) and Fourier-transform-infrared-spectroscopy (FTIR) with attenuated total-reflectance (ATR) to assess the morpho-chemical changes and variations in mineralization degree after demineralizing treatment, after five toothpastes application (HA & Citrate toothpaste, Zinc-HA toothpaste, Calcium Sodium Phosphosilicate toothpaste, Arginine & Calcium carbonate toothpaste, Colgate-Triple-Action, and Control toothpaste), after soaking in artificial saliva and after citric acid attack. METHODS: Ca/P, Ca/N and P/N ratios were calculated from EDX atomic data to evaluate the mineralization degree of dentine surface. The IR calcium phosphate (CaP)/collagen and carbonate/collagen ratios has been evaluated to assess the remineralization changes in dentine; the carbonate/collagen IR ratio was calculated to identify the nucleation of B-type-carbonated apatite and calcium carbonate. RESULTS: ESEM-EDX and ATR-FTIR showed residuals of toothpastes after the treatments in all cases, with a general increase in the mineralization degree after soaking in artificial saliva and a decrease after acid attack. Treatment with Arginine & Calcium carbonate toothpaste showed the highest Ca/P value after treatment (Ca/P 1.62) and acid attack (Ca/P 1.5) in confirmation, IR showed the highest amount of carbonate after treatment and soaking in artificial saliva. Arginine and calcium carbonate toothpaste and HA and citrate toothpaste remained to a higher extent on the dentine surface and revealed a higher remineralization activity. These formulations showed higher resistance to demineralization attack, as demonstrated by a higher ICaP /IAmide II intensity ratio than those obtained after EDTA treatment. CONCLUSIONS: Toothpastes that remained to a higher extent on dentine surface (arginine and calcium carbonate toothpaste in particular) were more able to promote remineralization. The formed calcium phosphate (CaPs) phase was intimately bound to dentine rather than a simple deposit.