RESUMEN
Interface phonon modes that are generated by several atomic layers at the heterointerface play a major role in the interface thermal conductance for nanoscale high-power devices such as nitride-based high-electron-mobility transistors and light-emitting diodes. Here we measure the local phonon spectra across AlN/Si and AlN/Al interfaces using atomically resolved vibrational electron energy-loss spectroscopy in a scanning transmission electron microscope. At the AlN/Si interface, we observe various interface phonon modes, of which the extended and localized modes act as bridges to connect the bulk AlN modes and bulk Si modes and are expected to boost the phonon transport, thus substantially contributing to interface thermal conductance. In comparison, no such phonon bridge is observed at the AlN/Al interface, for which partially extended modes dominate the interface thermal conductivity. This work provides valuable insights into understanding the interfacial thermal transport in nitride semiconductors and useful guidance for thermal management via interface engineering.
RESUMEN
Optically bright emitters in hexagonal boron nitride (hBN) often acting as a source of a single-photon are mostly attributed to point-defect centers, featuring localized intra-bandgap electronic states. Although vacancies, anti-sites, and impurities have been proposed as candidates, the exact physical and chemical nature of most hBN single-photon emitters (SPEs) within the visible region are still up for debate. Combining site-specific high-angle annular dark-field imaging (HAADF) with electron energy loss spectroscopy (EELS), we resolve and identify a few carbon substitutions among neighboring hBN hexagons, all within the same sample region, from which typical defect emission is observed. Our experimental results are further supported by first-principles calculations, through which the stability and possible optical transitions of the proposed carbon-defect complex are assessed. The presented correlation between optical emission and defects provides valuable information toward the controlled creation of emitters in hBN, highlighting carbon complexes as another probable cause of its visible SPEs.
RESUMEN
Two-dimensional (2D) materials with competing polymorphs offer remarkable potential to switch the associated 2D functionalities for novel device applications. Probing their phase transition and competition mechanisms requires nanoscale characterization techniques that can sensitively detect the nucleation of secondary phases down to single-layer thickness. Here we demonstrate nanoscale phase identification on 2D In2Se3 polymorphs, utilizing their distinct plasmon energies that can be distinguished by electron energy-loss spectroscopy (EELS). The characteristic plasmon energies of In2Se3 polymorphs have been validated by first-principles calculations, and also been successfully applied to reveal phase transitions using in situ EELS. Correlating with in situ X-ray diffraction, we further derive a subtle difference in the valence electron density of In2Se3 polymorphs, consistent with their disparate electronic properties. The nanometer resolution and independence of orientation make plasmon-energy mapping a versatile technique for nanoscale phase identification on 2D materials.
RESUMEN
Spectroscopies utilizing free electron beams as probes offer detailed information on the reciprocal-space excitations of 2D materials such as graphene and transition metal dichalcogenide monolayers. Yet, despite the attention paid to such quantum materials, less consideration has been given to the electron-beam characterization of 2D periodic nanostructures such as photonic crystals, metasurfaces, and plasmon arrays, which can exhibit the same lattice and excitation symmetries as their atomic analogues albeit at drastically different length, momentum, and energy scales. Because of their lack of covalent bonding and influence of retarded electromagnetic interactions, important physical distinctions arise that complicate interpretation of scattering signals. Here we present a fully-retarded theoretical framework for describing the inelastic scattering of wide-field electron beams from 2D materials and apply it to investigate the complementarity in sample excitation information gained in the measurement of a honeycomb plasmon array versus angle-resolved optical spectroscopy in comparison to single monolayer graphene.
RESUMEN
Electron energy loss spectra collected from fresh and corroded silver nanoparticles are compared with those from a number of reference materials, focusing on the M4,5 edge. Chemical shifts and changes in the energy loss near edge structure (ELNES) are described and found to be sufficient to distinguish metallic silver from chemically oxidised silver. The measurements, in conjunction with electron energy loss spectrum imaging, are used to assess the mechanisms for atmospheric corrosion of silver nanoparticles. We unambiguously assign the corrosion product under atmospheric conditions to be silver sulphide, but show the reaction process to be distinctly inhomogeneous, producing a variety of types of corroded particles. LAY DESCRIPTION: >Here, we use analytical electron microscopy to track the corrosion of silver nanoparticles and present chemical maps of the corrosion products. We show clear spectroscopic differences between metallic and corroded silver using the M4,5 electron energy loss spectral feature, which is not commonly studied. Our study shows that corrosion is due to interactions with sulphur in the atmosphere; and the corrosion is not uniform, but appears to develop from specific points on the surface of the nanoparticles.
RESUMEN
Great efforts have been made to build integrated devices to enable future wearable electronics; however, safe, disposable, and cost-effective power sources still remain a challenge. In this paper, an all-solid-state power source was developed by using graphene materials and can be printed directly on an insulating substrate such as paper. The design of the power source was inspired by electric eels to produce programmable voltage and current by converting the chemical potential energy of the ion gradient to electric energy in the presence of moisture. An ultrahigh voltage of 192 V with 175 cells in series printed on a strip of paper was realized under ambient conditions. For the planar cell, the mathematical fractal design concept was adapted as printed patterns, improving the output power density to 2.5 mW cm-3, comparable to that of lithium thin-film batteries. A foldable three-dimensional (3D) cell was also achieved by employing an origami strategy, demonstrating a versatile design to provide green electric energy. Unlike typical batteries, this power source printed on flexible paper substrate does not require liquid electrolytes, hazardous components, or complicated fabrication processes and is highly customizable to meet the demands of wearable electronics and Internet of Things applications.
RESUMEN
The controlled creation and manipulation of defects in 2D materials has become increasingly popular as a means to design and tune new material functionalities. However, defect characterization by direct atomic-scale imaging is often severely limited by surface contamination due to a blanket of hydrocarbons. Thus, analysis techniques that can characterize atomic-scale defects despite the contamination layer are advantageous. In this work, we take inspiration from X-ray absorption spectroscopy and use broad-beam electron energy loss spectroscopy (EELS) to characterize defect structures in 2D hexagonal boron nitride (hBN) based on averaged fine structure in the boron K-edge. Since EELS is performed in a transmission electron microscope (TEM), imaging can be performed in-situ to assess contamination levels and other factors such as tears in the fragile 2D sheets, which can affect the spectroscopic analysis. We demonstrate the TEM-EELS technique for 2D hBN samples irradiated with different ion types and doses, finding spectral signatures indicative of boron-oxygen bonding that can be used as a measure of sample defectiveness depending on the ion beam treatment. We propose that even in cases where surface contamination has been mitigated, the averaging-based TEM-EELS technique can be useful for efficient sample surveys to support atomically resolved EELS experiments.
RESUMEN
Cryo-transfer stations are essential tools in the field of cryo-electron microscopy, enabling the safe transfer of frozen vitreous samples between different stages of the workflow. However, existing cryo-transfer stations are typically configured for only the two most popular sample holder geometries and are not commercially available for all electron microscopes. Additionally, they are expensive and difficult to customize, which limits their accessibility and adaptability for research laboratories. Here, we present a new modular cryo-transfer station that addresses these limitations. The station is composed entirely of 3D-printed and off the shelf parts, allowing it to be reconfigured to a fit variety of microscopes and experimental protocols. We describe the design and construction of the station and report on the results of testing the cryo-transfer station, including its ability to maintain cryogenic temperatures and transfer frozen vitreous samples as demonstrated by vibrational spectroscopy. Our findings demonstrate that the cryo-transfer station performs comparably to existing commercial models, while offering greater accessibility and customizability. The design for the station is open source to encourage other groups to replicate and build on this development. We hope that this project will increase access to cryo-transfer stations for researchers in a variety of disciplines with nonstandard equipment.
RESUMEN
Utilizing advanced transmission electron microscopy (TEM), the structure at the (110)-type twin boundary (TB) of Ce-doped GdFeO3 (C-GFO) has been investigated with picometer precision. Such a TB is promising to generate local ferroelectricity within a paraelectric system, while precise knowledge about its structure is still largely missing. In this work, a direct measurement of the cation off-centering with respect to the neighboring oxygen is enabled by integrated differential phase contrast (iDPC) imaging, and up to 30 pm Gd off-centering is highly localized at the TB. Further electron energy loss spectroscopy (EELS) analysis demonstrates a slight accumulation of oxygen vacancies at the TB, a self-balanced behavior of Ce at the Gd sites, and a mixed occupation of Fe2+ and Fe3+ at the Fe sites. Our results provide an informative picture with atomic details at the TB of C-GFO, which is indispensable to further push the potential of grain boundary engineering.
RESUMEN
The interface polarity plays a vital role in the physical properties of oxide heterointerfaces because it can cause specific modifications of the electronic and atomic structure. Reconstruction due to the strong polarity of the NdNiO2/SrTiO3 interface in recently discovered superconducting nickelate films may play an important role, as no superconductivity has been observed in the bulk. By employing four-dimensional scanning transmission electron microscopy and electron energy-loss spectroscopy, we studied effects of oxygen distribution, polyhedral distortion, elemental intermixing, and dimensionality in NdNiO2/SrTiO3 superlattices grown on SrTiO3 (001) substrates. Oxygen distribution maps show a gradual variation of the oxygen content in the nickelate layer. Remarkably, we demonstrate thickness-dependent interface reconstruction due to a polar discontinuity. An average cation displacement of â¼0.025 nm at interfaces in 8NdNiO2/4SrTiO3 superlattices is twice larger than that in 4NdNiO2/2SrTiO3 superlattices. Our results provide insights into the understanding of reconstructions at NdNiO2/SrTiO3 polar interfaces.
RESUMEN
A rigorous account of quantum nonlocal effects is paramount for understanding the optical response of metal nanostructures and for designing plasmonic devices at the nanoscale. Here, we present a scheme for retrieving the quantum surface response of metals, encapsulated in the Feibelman d-parameters, from electron energy-loss spectroscopy (EELS) and cathodoluminescence (CL) measurements. We theoretically demonstrate that quantum nonlocal effects have a dramatic impact on EELS and CL spectra, in the guise of spectral shifts and nonlocal damping, when either the system size or the inverse wave vector in extended structures approaches the nanometer scale. Our concept capitalizes on the unparalleled ability of free electrons to supply deeply subwavelength near-fields and, thus, probe the optical response of metals at length scales in which quantum-mechanical effects are apparent. These results pave the way for a widespread use of the d-parameter formalism, thereby facilitating a rigorous yet practical inclusion of nonclassical effects in nanoplasmonics.
RESUMEN
We analyze the interaction between a free electron and an ensemble of identical optical emitters. The mutual coherence and correlations between the emitters can enhance the interaction with each electron and become imprinted on its energy spectrum. We present schemes by which such collective interactions can be realized. As a possible application, we investigate free-electron interactions with superradiant systems, showing how electrons can probe the ultrafast population dynamics of superradiance.
RESUMEN
The integration of metallic contacts with two-dimensional (2D) semiconductors is routinely required for the fabrication of nanoscale devices. However, nanometer-scale variations in the 2D/metal interface can drastically alter the local optoelectronic properties. Here, we map local excitonic changes of the 2D semiconductor MoS2 in contact with Au. We utilize a suspended and epitaxially grown 2D/metal platform that allows correlated electron energy-loss spectroscopy (EELS) and angle resolved photoelectron spectroscopy (nanoARPES) mapping. Spatial localization of MoS2 excitons uncovers an additional EELS peak related to the MoS2/Au interface. NanoARPES measurements indicate that Au-S hybridization decreases substantially with distance from the 2D/metal interface, suggesting that the observed EELS peak arises due to dielectric screening of the excitonic Coulomb interaction. Our results suggest that increasing the van der Waals distance could optimize excitonic spectra of mixed-dimensional 2D/3D interfaces and highlight opportunities for Coulomb engineering of exciton energies by the local dielectric environment or moiré engineering.
RESUMEN
Barathronus is a genus of blind cusk eels comprising 11 valid species. In this paper, we report the second specimen ever documented of Barathronus roulei (Bythitidae) obtained from the Porcupine Bank by R.V. Vizconde de Eza using a bottom trawl at a depth of 1349 m. Morphological description and illustrations, including a radiograph, are provided. In addition, three new sequences corresponding to three different genes, cytochrome c oxidase subunit I (COI)-DNA barcoding, 16S ribosomal RNA (16S), and recombination activating protein 1 (RAG1), have been added to the molecular repositories, representing the first sequences for the species.
RESUMEN
Single-atom catalysts (SACs) are an emerging class of materials, leveraging maximum atom utilization and distinctive structural and electronic properties to bridge heterogeneous and homogeneous catalysis. Direct imaging methods, such as aberration-corrected high-angle annular dark-field scanning transmission electron microscopy, are commonly applied to confirm the atomic dispersion of active sites. However, interpretations of data from these techniques can be challenging due to simultaneous contributions to intensity from impurities introduced during synthesis processes, as well as any variation in position relative to the focal plane of the electron beam. To address this matter, this paper presents a comprehensive study on two representative SACs containing isolated nickel or copper atoms. Spectroscopic techniques, including X-ray absorption spectroscopy, were employed to prove the high metal dispersion of the catalytic atoms. Employing scanning transmission electron microscopy imaging combined with single-atom-sensitive electron energy loss spectroscopy, we scrutinized thin specimens of the catalysts to provide an unambiguous chemical identification of the observed single-atom species and thereby distinguish impurities from active sites at the single-atom level. Overall, the study underscores the complexity of SACs characterization and establishes the importance of the use of spectroscopy in tandem with imaging at atomic resolution to fully and reliably characterize single-atom catalysts.
RESUMEN
Charge ordering (CO) phenomena have been widely debated in strongly-correlated electron systems mainly regarding their role in high-temperature superconductivity. Here, the structural and charge distribution in NdNiO2 thin films prepared with and without capping layers, and characterized by the absence and presence of CO are elucidated. The microstructural and spectroscopic analysis is done by scanning transmission electron microscopy-electron energy loss spectroscopy (STEM-EELS) and hard X-ray photoemission spectroscopy (HAXPES). Capped samples show Ni1+ , with an out-of-plane (o-o-p) lattice parameter of around 3.30 Å indicating good stabilization of the infinite-layer structure. Bulk-sensitive HAXPES on Ni-2p shows weak satellite features indicating large charge-transfer energy. The uncapped samples evidence an increase of the o-o-p parameter up to 3.65 Å on the thin film top with a valence toward Ni2+ in this region. Here, 4D-STEM demonstrates (303)-oriented stripes which emerge from partially occupied apical oxygen. Those stripes form quasi-2D coherent domains viewed as rods in the reciprocal space with Δqz ≈ 0.24 reciprocal lattice units (r.l.u.) extension located at Q = ( ± 1 3 , 0 , ± 1 3 $\pm \frac{1}{3},0,\pm \frac{1}{3}$ ) and ( ± 2 3 , 0 , ± 2 3 $\pm \frac{2}{3},0,\pm \frac{2}{3}$ ) r.l.u. The stripes associated with oxygen re-intercalation concomitant with hole doping suggest a possible link to the previously reported CO in infinite-layer nickelate thin films.
RESUMEN
With the recent development of high-acquisition-speed pixelated detectors, 4D scanning transmission electron microscopy (4D-STEM) is becoming routinely available in high-resolution electron microscopy. 4D-STEM acts as a "universal" method that provides local information on materials that is challenging to extract from bulk techniques. It extends conventional STEM imaging to include super-resolution techniques and to provide quantitative phase-based information, such as differential phase contrast, ptychography, or Bloch wave phase retrieval. However, an important missing factor is the chemical and bonding information provided by electron energy loss spectroscopy (EELS). 4D-STEM and EELS cannot currently be acquired simultaneously due to the overlapping geometry of the detectors. Here, the feasibility of modifying the detector geometry to overcome this challenge for bulk specimens is demonstrated, and the use of a partial or defective detector for ptycholgaphic structural imaging is explored. Results show that structural information beyond the diffraction-limit and chemical information from the material can be extracted together, resulting in simultaneous multi-modal measurements, adding the additional dimensions of spectral information to 4D datasets.
RESUMEN
Soil carbon stabilization is mainly driven by organo-mineral interactions. Coprecipitates, of organic matter with short-range order minerals, detected through indirect chemical extraction methods, are increasingly recognized as key carbon sequestration phases. Yet the atomic structure of these coprecipitates is still rather conceptual. We used transmission electron microscopy imaging combined with energy-dispersive X-ray and electron energy loss spectroscopy chemical mappings, which enabled direct nanoscale characterization of coprecipitates from Andosols. A comparison with reference synthetic coprecipitates showed that the natural coprecipitates were structured by an amorphous Al, Si, and Fe inorganic skeleton associated with C and were therefore even less organized than short-range order minerals usually described. These amorphous types of coprecipitates resembled previously conceptualized nanosized coprecipitates of inorganic oligomers with organics (nanoCLICs) with heterogeneous elemental proportions (of C, Al, Si, and Fe) at nanoscale. These results mark a new step in the high-resolution imaging of organo-mineral associations, while shedding further light on the mechanisms that control carbon stabilization in soil and more broadly in aquatic colloid, sediment, and extraterrestrial samples.
Asunto(s)
Minerales , Suelo , Suelo/química , Minerales/química , Carbono , Microscopía Electrónica de TransmisiónRESUMEN
Photonic modes in dielectric nanostructures, e.g., wide gap semiconductor like CeO2 (ceria), have the potential for various applications such as information transmission and sensing technology. To fully understand the properties of such phenomenon at the nanoscale, electron energy-loss spectroscopy (EELS) in a scanning transmission electron microscope was employed to detect and explore photonic modes in well-defined ceria nanocubes. To facilitate the interpretation of the observations, EELS simulations were performed with finite-element methods. The simulations allow the electric and magnetic field distributions associated with different modes to be determined. A simple analytical eigenfunction model was also used to estimate the energy of the photonic modes. In addition, by comparing various spectra taken at different location relative to the cube, the effect of the surrounding environment on the modes could be sensed. This work gives a high-resolution description of the photonic modes' properties in nanostructures, while demonstrating the advantage of EELS in characterizing optical phenomena locally.
RESUMEN
We report on the electronic structure of vanadium in synthetic V-oxides and in natural roscoelite (V-rich phyllosilicate). This study applied electron energy-loss spectroscopy (EELS) in the scanning transmission electron microscope (STEM), combined with first-principle calculations, to (1) establish relationships between the V oxidation state and EELS L2,3 features and (2) better constrain the oxidation state and crystallographic siting of V in roscoelite, with implications for other V-bearing phyllosilicates. Both EELS measurements and band structure calculations show that the EELS L2/L3 ratio increases as the oxidation state of V increases. We establish a quantitative relationship between the V L2,3 near-edge structure and the V oxidation state by normalizing the L2 maximum peak intensity to the L3 peak intensity. By applying this method to roscoelite, we find that it hosts a mix of trivalent and tetravalent V distributed between the octahedral and tetrahedral sites with a V4+/ΣV = 0.6 ± 0.1. This relationship is applicable to measurements of V oxidation states in oxide and phyllosilicate minerals, which is useful for constraining the conditions of rock and mineral formation and has potential implications for metal extraction from phyllosilicate ores.