Modified Q-type purse-string suture duodenal stump embedding method for laparoscopic gastrectomy for gastric cancer.

OBJECTIVE: This study introduced the modified Q-type purse-string suture duodenal stump embedding method, a convenient way to strengthen the duodenum, and compared it to the conventional one to assess its efficacy and safety. METHODS: This retrospective analysis examined 612 patients who received laparoscopic gastrectomy for gastric Cancer at a single center. The patients were divided into Not Reinforced Group (n = 205) and Reinforced Group (n = 407) according to the surgical approach to the duodenal stump. The reinforced group was further divided into a modified Q-type purse-string suture embedding method group (QM, n = 232) and a conventional suture duodenal stump embedding method group (CM, n = 175) according to the methods of duodenal stump enhancement. Clinicopathological characteristics, operative variables, and short-term complications were documented and analyzed. RESULTS: The incidence of duodenal stump leakage(DSL) in the Not Reinforced Group was higher compared to the Reinforced Group, although the difference was not statistically significant [2.4% (5/205) vs 0.7% (3/407), p = 0.339]. Additionally, the Not Reinforced Group exhibited a higher rate of Reoperation due to DSL compared to the Reinforced Group [2 (1.0%) vs. 0, p = 0.046], with one patient in the Not Reinforced Group experiencing mortality due to DSL [1 (0.5%) vs 0, p = 0.158]. Subgroup analysis within the Reinforced Group revealed that the modified Q-type purse-string suture embedding group (QM) subgroup demonstrated statistically significant advantages over the conventional suture embedding group (CM) subgroup. QM exhibited shorter purse-string closure times (4.11 ± 1.840 vs. 6.05 ± 1.577, p = 0.001), higher purse-string closure success rates (93.1% vs. 77.7%, p = 0.001), and greater satisfaction with purse-string closure [224 (96.6%) vs 157 (89.7%), p = 0.005]. No occurrences of duodenal stump leakage were observed in the QM subgroup, while the CM subgroup experienced two cases [2 (1.1%)], though the difference was not statistically significant. Both groups did not exhibit statistically significant differences in secondary surgery or mortality related to duodenal stump leakage. CONCLUSION: Duodenal Stump Leakage (DSL) is a severe but low-incidence complication. There is no statistically significant relationship between the reinforcement of the duodenal stump and the incidence of DSL. However, laparoscopic reinforcement of the duodenal stump can reduce the severity of fistulas and the probability of Reoperation. The laparoscopic Q-type purse-string suture duodenal stump embedding method is a simple and effective technique that can, to some extent, shorten the operation time and enhance satisfaction with purse-string closure. There is a trend towards reducing the incidence of DSL, thereby improving patient prognosis to a certain extent.

Simple computation of reaction-diffusion processes on point clouds.

The study of reaction-diffusion processes is much more complicated on general curved surfaces than on standard Cartesian coordinate spaces. Here we show how to formulate and solve systems of reaction-diffusion equations on surfaces in an extremely simple way, using only the standard Cartesian form of differential operators, and a discrete unorganized point set to represent the surface. Our method decouples surface geometry from the underlying differential operators. As a consequence, it becomes possible to formulate and solve rather general reaction-diffusion equations on general surfaces without having to consider the complexities of differential geometry or sophisticated numerical analysis. To illustrate the generality of the method, computations for surface diffusion, pattern formation, excitable media, and bulk-surface coupling are provided for a variety of complex point cloud surfaces.

Development of a highly sensitive ultra-small ratiometric fluorescence nanosphere probe for Sunset Yellow detection.

A highly sensitive ultra-small ratiometric fluorescence nanosphere probe was successfully manufactured to detect Sunset Yellow (SY). The probe, CMCS@N, S-CDs/Rh6G, was formed through the encapsulation of N, S-CDs and Rh6G within carboxymethyl chitosan (CMCS) through in situ cross-linking. Remarkably, our nanosphere probe had an average grain diameter of 6.80 nm and exhibited excellent dispersibility without the need for additional solvents. The probe exhibited a strong linear relationship with SY concentration in the range of 0.26-100 µM, with a low detection limit of 0.078 µM. Furthermore, SY demonstrated strong fluorescence quenching capability on our nanosphere probe, with the fluorescence quenching mechanism involving a combined effects of inner filter effect (IFE) and static quenching. Notably, our nanosphere probe retained the bacteriostatic properties of CMCS, with a substantial bacteriostasis rate of 77.58 %, introducing novel potential applications.

Effect of lignocellulose/montmorillonite immobilized Bacillus sp. on monosodium glutamate wastewater.

A group of Bacillus sp. was extracted from monosodium glutamate wastewater. Lignocellulose/montmorillonite composite was selected as the carrier. Lignocellulose/montmorillonite composite immobilized Bacillus sp./calcium alginate microspheres were prepared by immobilized microorganism techniques. The microspheres were used to treat monosodium glutamate wastewater with significantly reduced ammonia nitrogen (NH3-N) and chemical oxygen demand (COD) concentrations. The optimum preparation conditions of microspheres in the treatment of NH3-N and COD of monosodium glutamate wastewater were studied. The concentration of sodium alginate was 2.0 wt%, lignocellulose/montmorillonite was 0.06 wt%, Bacillus sp. was 1.0 wt%, CaCl2 solution was 2.0 wt%, coagulation time was 12 h, and the removal capacities of NH3-N and COD were 44832 and 78345 mg/L, respectively. The surface structure, element content, functional group change, and crystal structure of the microspheres were characterized by SEM, EDS, and other methods. The results showed that the -COOH in lignocellulose/montmorillonite and the -OH in the Bacillus sp. form intermolecular hydrogen bonds. The Si-O and Al-O bonds in lignocellulose/montmorillonite reacted with sodium ions in sodium alginate. New crystal structures appear inside the material after crosslinking, and the microspheres was formed. Thus, the study has shown that the microspheres were successfully prepared and contributes to the treatment of NH3-N and COD in monosodium glutamate wastewater. This work can provide an interesting strategy for the removal of COD and NH3-N in industrial wastewater by reasonably combining bio-physicochemical processes.

Construction of a Biomimetic Receptor Based on Hydrophilic Multifunctional Monomer Covalent Organic Framework Molecularly Imprinted Polymers for Molecular Recognition of Cyanidin-3-O-Glucoside.

Anthocyanins (AOCs) are phenols that are readily soluble in water and are commonly present in plants. The chemical instability of AOC, however, causes it to be severely limited in terms of extraction and purification. Hence, in order to obtain efficient and stable extraction of AOC, we designed hydrophilic multifunctional monomer covalent organic framework molecularly imprinted polymers (HMCMIPs) as adsorbents. The functional reagent, p-aminobenzenesulfonic acid (ASA), was added to this material during synthesis to facilitate the sulfonation modification of covalent organic frameworks (COFs), which enhanced its affinity for hydrophilic guests (cyanidin-3-O-glucoside, the representative nutritional and functional ingredient in AOC). With ASA serving as a terminator, overextension of the material to form micron-level cross-linked structures is prevented, thereby increasing its surface area and mass transfer efficiency. The biomimetic receptors were then created by integrating MIPs into sulfonated COFs in order to create multiple binding sites specific for C3G recognition. HMCMIPs exhibited excellent adsorption capacity (1566 mg/g) and superior selectivity (selectivity coefficient >12) for C3G. It has been demonstrated that high purity (93.72%) C3G can be obtained rapidly and efficiently by utilizing HMCMIPs. There may be a potential benefit to the synthesis strategy of HMCMIPs for the extraction of specific active ingredients in the future.

[Bibliometric analysis on key elements of clinical application of acupoint catgut embedding therapy in recent ten years].

OBJECTIVE: To analyze the characteristics of acupoint catgut embedding methods, tools, catgut types, and the treatment cycles in the clinical research in recent ten years both at home and abroad, so as to summarize its regularities and to provide technical references for further studies. METHODS: Articles about clinical researches on catgut embedding therapy published in recent ten years (from January 1, 2010 to December 31,2020) were retrieved from the databases of CNKI, Wanfang, VIP, and PubMed by using key words of "acupoint embedding" "acupoint catgut embedding" and "catgut implantation at acupoint". According to the inclusion and exclusion criteria, a new database was established for analyzing the data mentioned above. RESULTS: 1) A total of 1 196 articles were collected, including 15 English articles and 1 181 Chinese articles, presenting a fluctuating increasing trend in recent ten years. 2) The commonly used acupoint embedding methods included disposable catgut embedment needle method (399 times, 38.89%) and disposable syringe needle catgut embedding method (347 times, 33.82%), for which two or multiple methods were mentioned in the same one article. 3) The most frequently used top two tools for catgut embedding were the dispo-sable catgut embedment needle (463 times, 43.03%) and disposable syringe needle (406 times,37.73%), with a significant increase in the application of disposable syringe needle. The most commonly used size of tools included No. 7 (283 times, 39.86%), No. 9 (196 times, 27.61%) and No. 8 (109 times, 15.35%). 4) The most frequently implanted surgical suture was still the common catgut (671 times, 58.15%) despite of a reduction in clinical application year by year, and the types of the implanted suture materials were gradually enriched since 2018, such as the absorbable surgical suture, polyethylprolactide(PGLA), collagen protein thread, polydioxanone(PPDO), etc. The commonly used implanted catgut size was 3-0 (227 times, 30.15%), 2-0 (176 times, 23.37%), 4-0 (131 times, 17.40%), 0 (103 times, 13.68%), with the commonly used catgut length being 1 cm (332 times, 35.55%), 1.5 cm (103 times, 11.03%), 1-2 cm (92 times, 9.85%) and 2 cm (92 times, 9.85%). 5) The intervals of the catgut implantation were 7 days (313 times, 28.95%), 14 days (262 times, 24.24%), 10 days (174 times, 16.10%), and 15 days (162 times, 14.99%). CONCLUSION: In recent ten years, clinical research on acupoint catgut embedding is growing rapidly, and the embedding methods, tools, implanted sutures, and embedding intervals are various, which may provide certain technical references for the future researches and suggest an urgent need of formulation of the standardized and unified standards in this field.

Serial ultrathin sections to identify ultrastructural localization of GLUT1 molecules in vesicles in brain endothelial cells-correlative light and electron microscopy in depth.

Precise immunolocalization of molecules in relation to ultrastructural features is challenging, especially when the target is small and not frequent enough to be included in tiny ultrathin sections randomly selected for electron microscopy (EM). Glucose transporter 1 (GLUT1) is in charge of transporting glucose across brain capillary endothelial cells (BCECs). Paraformaldehyde-fixed floating sections (50 µm thick) of mouse brain were immunolabeled with anti-GLUT1 antibody and visualized with fluoronanogold. Fluorescent images encompassing the entire hemisphere were tiled to enable selection of GLUT1-positive BCECs suitable for subsequent EM and landmark placement with laser microdissection to guide trimming. Sections were then fixed with glutaraldehyde, gold enhanced to intensify the labeling and fixed with osmium tetroxide to facilitate ultrastructural recognition. Even though a region that contained target BCECs was successfully trimmed in the resin block, it was only after observation of serial ultrathin sections that GLUT1 signals in coated vesicles on the same cross section corresponding to the cross section preidentified by confocal laser microscope. This is the first ultrastructural demonstration of GLUT1 molecules in coated vesicles, which may well explain its functional relevance to transport glucose across BCECs. Successful ultrastructural localization of molecules in relation to well-preserved target structure in native tissue samples, as achieved in this study, will pave the way to understand the functional relevance of molecules and their relation to ultrastructural details.

Innovative Approach to Fast Electron Microscopy Using the Example of a Culture of Virus-Infected Cells: An Application to SARS-CoV-2.

Despite the development of new diagnostic methods, co-culture, based on sample inoculation of cell monolayers coupled with electron microscopy (EM) observation, remains the gold standard in virology. Indeed, co-culture allows for the study of cell morphology (infected and not infected), the ultrastructure of the inoculated virus, and the different steps of the virus infectious cycle. Most EM methods for studying virus cycles are applied after infected cells are produced in large quantities and detached to obtain a pellet. Here, cell culture was performed in sterilized, collagen-coated single-break strip wells. After one day in culture, cells were infected with SARS-CoV-2. Wells of interest were fixed at different time points, from 2 to 36 h post-infection. Microwave-assisted resin embedding was accomplished directly in the wells in 4 h. Finally, ultra-thin sections were cut directly through the infected-cell monolayers. Our methodology requires, in total, less than four days for preparing and observing cells. Furthermore, by observing undetached infected cell monolayers, we were able to observe new ultrastructural findings, such as cell-cell interactions and baso-apical cellular organization related to the virus infectious cycle. Our innovative methodology thus not only saves time for preparation but also adds precision and new knowledge about viral infection, as shown here for SARS-CoV-2.

MOF-enzyme hybrid nanosystem decorated 3D hollow fiber membranes for in-situ blood separation and biosensing array.

Modified metal-organic frameworks (MOFs) doping with enzymes exhibit high enzyme stability and catalytic performance, which is a research hotspot in the field of enzyme-based sensing. Although the MOF-enzyme constitutes a 3D structure in the nanoscale, the macroscopic assembly configuration still stays in 1D or 2D structures, limiting sensing applications towards complex biological targets. Herein, the MOF-enzyme hybrid nanosystem was assembled into 3D porous conductive supports via a controllable physical embedding method, displaying high enzymatic loading, stability and cascade catalytic performance. The modified MOFs combing with enzymes served as a sensing reaction system, and the conductive hollow fiber membranes (HFMs) served as a functional platform. The multifunctional device integrates pumpless hydrodynamic transport, interconnected conductive polymer, and blood separation modules, showing fast capillary fluid flow, trace sampling (3 µL), high selectivity and accuracy. The linear sensing range was in 2-24 mM glucose, 0.05-6 mM lactic acid, and 0.1-10 mM cholesterol, respectively, with sensitivities of 24.2, 150, 73.6 nA mM-1. Furthermore, this strategy of modular assembly of biosensing array can easily implement multiplex metabolites detection simultaneously.

Photoexcited NO2 Enables Accelerated Response and Recovery Kinetics in Light-Activated NO2 Gas Sensing.

Slow response and recovery kinetics is a major challenge for practical room-temperature NO2 gas sensing. Here, we report the use of visible light illumination to significantly shorten the response and recovery times of a PbSe quantum dot (QD) gel sensor by 21% (to 27 s) and 63% (to 102 s), respectively. When combined with its high response (0.04%/ppb) and ultralow limit of detection (3 ppb), the reduction in response and recovery time makes the PbSe QD gel sensor among the best p-type room-temperature NO2 sensors reported to date. A combined experimental and theoretical investigation reveals that the accelerated response and recovery time is primarily due to photoexcitation of NO2 gaseous molecules and adsorbed NO2 on the gel surface, rather than the excitation of the semiconductor sensing material, as suggested by the currently prevailing light-activated gas-sensing theory. Furthermore, we find that the extent of improvement attained in the recovery speed also depends on the distribution of excited electrons in the adsorbed NO2/QD gel system. This work suggests that the design of light-activated sensor platforms may benefit from a careful assessment of the photophysics of the analyte in the gas phase and when adsorbed onto the semiconductor surface.

Adsorption of heavy metal tolerance strains to Pb2+ and Cd2+ in wastewater.

The functional strains with high tolerance to heavy metal Pb2+ and Cd2+ were screened from soil obtained in a heavy metal waste accumulation area. The immobilized biological adsorbent was made by embedding method and used for treatment of wastewater containing heavy metals. The effects of initial concentration of heavy metals, adsorption time, pH value of wastewater, and dosage of adsorbent on adsorption performance were investigated. The study showed (1) the strains tested were Brevibacterium and their maximum tolerable concentrations for Pb2+ and Cd2+ were 2200 and 700 mg/L, respectively; (2) the maximum adsorption rate for Pb2+ and Cd2+ was 87.77% and 57.50% respectively when the dosage of adsorbent was 10 g/L and the pH value of wastewater was 6; (3) Pb2+ and Cd2+ could be adsorbed in the equilibrium solution for 40 min and the maximum adsorption capacity reached 114.36 mg/g and 82.12 mg/g, respectively; and (4) when the initial pH value of the wastewater was 5-7, the adsorption rate decreased with the increase of the concentration, and the initial concentration of Pb2+ had a greater effect on the adsorption rate than Cd2+. Langmuir and Freundlich equation showed that the adsorption of Pb2+ and Cd2+ was mainly on the surface of monolayer. And the pseudo-second-order kinetic equation indicates that Cd2+ has a relatively greater adsorption rate than Pb2+ does.

Prediction of Drug Combinations with a Network Embedding Method.

AIM AND OBJECTIVE: There are several diseases having a complicated mechanism. For such complicated diseases, a single drug cannot treat them very well because these diseases always involve several targets and single targeted drugs cannot modulate these targets simultaneously. Drug combination is an effective way to treat such diseases. However, determination of effective drug combinations is time- and cost-consuming via traditional methods. It is urgent to build quick and cheap methods in this regard. Designing effective computational methods incorporating advanced computational techniques to predict drug combinations is an alternative and feasible way. METHOD: In this study, we proposed a novel network embedding method, which can extract topological features of each drug combination from a drug network that was constructed using chemical-chemical interaction information retrieved from STITCH. These topological features were combined with individual features of drug combination reported in one previous study. Several advanced computational methods were employed to construct an effective prediction model, such as synthetic minority oversampling technique (SMOTE) that was used to tackle imbalanced dataset, minimum redundancy maximum relevance (mRMR) and incremental feature selection (IFS) methods that were adopted to analyze features and extract optimal features for building an optimal support machine vector (SVM) classifier. RESULTS AND CONCLUSION: The constructed optimal SVM classifier yielded an MCC of 0.806, which is superior to the classifier only using individual features with or without SMOTE. The performance of the classifier can be improved by combining the topological features and essential features of a drug combination.

An Efficient and Reusable Embedded Ru Catalyst for the Hydrogenolysis of Levulinic Acid to γ-Valerolactone.

To achieve a higher activity and reusability of a Ru-based catalyst, Ru nanoparticles were embedded in N-doped mesoporous carbon through a hard-template method. The catalyst showed excellent catalytic performance (314 h-1 turnover frequency) and recyclability (reusable five times with 3 % activity loss) for the hydrogenolysis of levulinic acid to γ-valerolactone. Compared with the mesoporous carbon without N-doping and conventional activated carbon, the introduction of N-dopant effectively improved the dispersion of Ru nanoparticles, decreased the average size of Ru nanoparticles to as small as 1.32 nm, and improved the adsorption of levulinic acid, which contributed to the increase in the activity of the catalyst. Additionally, the embedding method increased the interaction between Ru nanoparticles and carbon support in contrast with the conventional impregnation method, thus preventing the Ru nanoparticles from migration, aggregation, and leaching from the carbon surface and therefore increasing the reusability of the catalyst.

Pre-embedding Method of Electron Microscopy for Glycan Localization in Mammalian Tissues and Cells Using Lectin Probes.

In recent years, the study of glycans is progressing remarkably by the development of glycan analysis systems using mass spectrometry, glycan profiling systems using lectin microarrays, and glycoprotein analysis by the isotope-coded glycosylation site-specific tagging method. With these methodologies, glycan structures and biological functions are being elucidated. In the study of glycan function as well as disease diagnosis, it is important to examine the localization of glycans in tissues and cells. Histochemical methods using lectin probes can localize glycans in the tissues and cells. This chapter describes a pre-embedding electron microscopic method for glycan localization in which tissue sections and cells are incubated with lectin prior to embedding in resin.

Post-embedding Mammalian Tissue for Immunoelectron Microscopy: A Standardized Procedure Based on Heat-Induced Antigen Retrieval.

We describe a standardized method of fixation, antigen retrieval, and image contrasting for post-embedding immunoelectron microscopy. Tissues are fixed with formaldehyde solutions containing Ca(2+) and Mg(2+) ions at pH 7.4 and then at pH 8.5. After dehydration with dimethylformamide, the specimens are embedded in LR-White resin. For antigen retrieval, ultrathin sections are heated in 0.5 M Tris-HCl, pH 9.0, for 1-2 h at 95 °C. After immunogold labeling, the sections are treated with a mixture of tannic acid and glutaraldehyde, with OsO4 solution, and then double-stained with uranyl acetate and lead citrate. The standardized method yields strong and reproducible immunoreactions for many antigens showing excellent image contrast without destruction of fine structures.