A nitroaromatic cathode with an ultrahigh energy density based on six-electron reaction per nitro group for lithium batteries.

Organic electrode materials have emerged as promising alternatives to conventional inorganic materials because of their structural diversity and environmental friendliness feature. However, their low energy densities, limited by the single-electron reaction per active group, have plagued the practical applications. Here, we report a nitroaromatic cathode that performs a six-electron reaction per nitro group, drastically improving the specific capacity and energy density compared with the organic electrodes based on single-electron reactions. Based on such a reaction mechanism, the organic cathode of 1,5-dinitronaphthalene demonstrates an ultrahigh specific capacity of 1,338 mAh⋅g-1 and energy density of 3,273 Wh⋅kg-1, which surpass all existing organic cathodes. The reaction path was verified as a conversion from nitro to amino groups. Our findings open up a pathway, in terms of battery chemistry, for ultrahigh-energy-density Li-organic batteries.

Zinc Powder Anodes for Rechargeable Aqueous Zinc-Based Batteries.

Aqueous rechargeable zinc-based batteries hold great promise for energy storage applications, with most research utilizing zinc foils as the anode. Conversely, the high tunability of zinc powder (Zn-P) makes it an ideal choice for zinc-based batteries, seamlessly integrating with current battery production technologies. However, challenges such as contact loss, dendrite formation, and a high tendency for corrosion significantly hamper the performance enhancement of Zn-P anodes. This review provides an overview of strategies adopted from various perspectives, including zinc powder optimization, electrode engineering, and electrolyte modification, to address these issues. Additionally, it explores the limitations of existing research and offers valuable insights into potential future directions for further advancements in Zn-P anodes.

Phosphorized 3D Current Collector for High-Energy Anode-Free Lithium Metal Batteries.

The anode-free lithium metal battery (AF-LMB) demonstrates the emerging battery chemistry, exhibiting higher energy density than the existing lithium-ion battery and conventional LMB empirically. A systematic step-by-step while bottom-up calculation system is first developed to quantitatively depict the energy gap from theory to practice. The attainable high energy of AF-LMB necessitates a homogeneous Li+ flux on the anode side to achieve an improved Li reversibility against inventory loss. On such basis, a lithiophilic Cu3P-decorated 3D copper foil to promote dendrite-free lithium deposition is further reported. The phosphorized surface of high affinity toward Li+ incorporating the nanostructure of abundant nucleation sites synergistically regulates the Li nucleation/growth behavior, extending the cycling lifespan of high-loading AF-LMBs. The processed foil featuring lightweight and ultrathin merits further increases the energy density, both gravimetrically and volumetrically. This study provides a novel scheme for simultaneously realizing the uniform deposition of lithium and increasing the energy density of future AF-LMBs.

Significantly Enhanced the Energy Density of Dielectric Composites by Sandwich Structure with Highly Insulating Mica Nanosheets.

Dielectric polymer composites exhibit great application prospects in advanced pulse power systems and electric systems. However, the decline of breakdown strength by loading of single high dielectric constant nanofiller hinders the sustained increase in energy density of the composites. Here, a sandwich-structured nanocomposite prepared with mica nanosheets as the second filler exhibits decoupled modulation of dielectric constant and breakdown strength. The traditional layered clay mineral mica is exfoliated into nanosheets and filled into polyvinylidene difluoride (PVDF), which shows a special depolarization effect in the polymer matrix. In Kelvin probe microscopy characterization and thermally stimulated depolarization current indicates that the mica nanosheets provided space charge traps for the polymer matrix and effectively suppressed the carrier motion. A sandwich structure composite material with mica nanosheets as the central layer has achieved a high energy density of 11.48 J cm-3, 2.4 times higher than the pure PVDF film. This is due to the fact that randomly oriented distribution of nanosheets in a polymer matrix provide better current blocking. This work provides an effective method to improve the energy density of dielectric polymer composites by synergistically introducing insulating nanosheets and high dielectric constant nanofillers.

Electrolyte Engineering Empowers Li||CFx Batteries to Achieve High Energy Density and Low Self-Discharge at Harsh Conditions.

Given its exceptional theoretical energy density (over 2000 Wh kg-1), lithium||carbon fluoride (Li||CFx) battery has garnered global attention. N-methylpyrrolidone (NMP)-based electrolyte is regarded as one promising candidate for tremendously enhancing the energy density of Li||CFx battery, provided self-discharge challenges can be resolved. This study successfully achieves a low self-discharge (LSD) and desirable electrochemical performance in Li||CFx batteries at high temperatures by utilizing NMP as the solvent and incorporating additional ingredients, including vinylene carbonate additive, as well as the dual-salt systems formed by LiBF4 with three different Li salts, namely lithium bis(oxalato)borate, lithium difluoro(oxalato)borate, and LiNO3. The experimental results unfold that the proposed methods not only minimize aluminum current collector corrosion, but also effectively passivate the Li metal anode. Among them, LiNO3 exhibits the most pronounced effect that achieves an energy density of ≈2400 Wh kg-1 at a current density of 10 mA g-1 at 30 °C, nearly 0% capacity-fade rate after 300 h of storage at 60 °C, and the capability to maintain a stable open-circuit voltage over 4000 h. This work provides a distinctive perspective on how to realize both high energy density and LSD rates at high temperature of Li||CFx battery.

A Comprehensive Evaluation of Battery Technologies for High-Energy Aqueous Batteries.

Aqueous batteries have garnered significant attention in recent years as a viable alternative to lithium-ion batteries for energy storage, owing to their inherent safety, cost-effectiveness, and environmental sustainability. This study offers a comprehensive review of recent advancements, persistent challenges, and the prospects of aqueous batteries, with a primary focus on energy density compensation of various battery engineering technologies. Additionally, cutting-edge high-energy aqueous battery designs are emphasized as a reference for future endeavors in the pursuit of high-energy storage solutions. Finally, a dual-compatibility battery configuration perspective aimed at concurrently optimizing cycle stability, redox potential, capacity utilization for both anode and cathode materials, as well as the selection of potential electrode candidates, is proposed with the ultimate goal of achieving cell-level energy densities exceeding 400 Wh kg-1.

Rational Design of High-Performance Electrodes Based on Ferric Oxide Nanosheets Deposited on Reduced Graphene Oxide for Advanced Hybrid Supercapacitors.

The core strategy for constructing ultra-high-performance hybrid supercapacitors is the design of reasonable and effective electrode materials. Herein, a facile solvothermal-calcination strategy is developed to deposit the phosphate-functionalized Fe2O3 (P-Fe2O3) nanosheets on the reduced graphene oxide (rGO) framework. Benefiting from the superior conductivity of rGO and the high conductivity and fast charge storage dynamics of phosphate ions, the synthesized P-Fe2O3/rGO anode exhibits remarkable electrochemical performance with a high capacitance of 586.6 F g-1 at 1 A g-1 and only 4.0% capacitance loss within 10 000 cycles. In addition, the FeMoO4/Fe2O3/rGO nanosheets are fabricated by utilizing Fe2O3/rGO as the precursor. The introduction of molybdates successfully constructs open ion channels between rGO layers and provides abundant active sites, enabling the excellent electrochemical features of FeMoO4/Fe2O3/rGO cathode with a splendid capacity of 475.4 C g-1 at 1 A g-1. By matching P-Fe2O3/rGO with FeMoO4/Fe2O3/rGO, the constructed hybrid supercapacitor presents an admirable energy density of 82.0 Wh kg-1 and an extremely long working life of 95.0% after 20 000 cycles. Furthermore, the continuous operation of the red light-emitting diode for up to 30 min demonstrates the excellent energy storage properties of FeMoO4/Fe2O3/rGO//P-Fe2O3/rGO, which provides multiple possibilities for the follow-up energy storage applications of the iron-based composites.

Rational Design of High-Loading Electrodes with Superior Performances Toward Practical Application for Energy Storage Devices.

High-loading electrodes play a crucial role in designing practical high-energy batteries as they reduce the proportion of non-active materials, such as current separators, collectors, and battery packaging components. This design approach not only enhances battery performance but also facilitates faster processing and assembly, ultimately leading to reduced production costs. Despite the existing strategies to improve rechargeable battery performance, which mainly focus on novel electrode materials and high-performance electrolyte, most reported high electrochemical performances are achieved with low loading of active materials (<2 mg cm-2). Such low loading, however, fails to meet application requirements. Moreover, when attempting to scale up the loading of active materials, significant challenges are identified, including sluggish ion diffusion and electron conduction kinetics, volume expansion, high reaction barriers, and limitations associated with conventional electrode preparation processes. Unfortunately, these issues are often overlooked. In this review, the mechanisms responsible for the decay in the electrochemical performance of high-loading electrodes are thoroughly discussed. Additionally, efficient solutions, such as doping and structural design, are summarized to address these challenges. Drawing from the current achievements, this review proposes future directions for development and identifies technological challenges that must be tackled to facilitate the commercialization of high-energy-density rechargeable batteries.

Dynamically Cross-Linked, Self-Healable, and Stretchable All-Hydrogel Supercapacitor with Extraordinary Energy Density and Real-Time Pressure Sensing.

Wearable electronics with flexible, integrated, and self-powered multi-functions are becoming increasingly attractive, but their basic energy storage units are challenged in simultaneously high energy density, self-healing, and real-time sensing capability. To achieve this, a fully flexible and omni-healable all-hydrogel, that is dynamically crosslinked PVA@PANI hydrogel, is rationally designed and constructed via aniline/DMSO-emulsion-templated in situ freezing-polymerization strategy. The PVA@PANI sheet, not only possesses a honeycombed porous conductive mesh configuration with superior flexibility that provides numerous channels for unimpeded ions/electron transport and maximizes the utilization efficiency of pseudocapacitive PANI, but also can conform to complicated body surface, enabling effective detection and discrimination of body movements. As a consequence, the fabricated flexible PVA@PANI sheet electrode demonstrates an unprecedented specific capacitance (936.8 F g-1 ) and the assembled symmetric flexible all-solid-state supercapacitor delivers an extraordinary energy density of 40.98 Wh kg-1 , outperforming the previously highest-reported values of stretchable PVA@PANI hydrogel-based supercapacitors. What is more, such a flexible supercapacitor electrode enables precisely monitoring the full-range human activities in real-time, and fulfilling a quick response and excellent self-recovery. These outstanding flexible sensing and energy storage performances render this emerging PVA@PANI hydrogel highly promising for the next-generation wearable self-powered sensing electronics.

Flexible Hybrid Supercapacitor Achieving 2.2 V with NiCo2S4/Polyaniline/MnO2 and N, S-Co-Doped Carbon Nanofibers for Ultra-High Energy Density.

Flexible all-solid-state asymmetric supercapacitors (FAASC) represent a highly promising power sources for wearable electronics. However, their energy density is relatively less as compared to the conventional batteries. Herein, a novel ultra-high energy density FAASC is developed using nickel-cobalt sulfide (NiCo2S4)/polyaniline (PANI)/manganese dioxide (MnO2) ternary composite on carbon fiber felt (CF) as positive and N, S-co-doped carbon nanofibers (CNF)/CF as negative electrode, respectively. Initially, porous δ-MnO2 nanoworm-like network is decorated on CF using potentiodynamic method. Subsequently, interconnected PANI nanostructures is grown on the MnO2 via a facile in situ chemical polymerization, followed by the electrodeposition of highly porous NiCo2S4 nanowalls. Benefiting from 3D porous structure of conductive CF and redox active properties of NiCo2S4, PANI and MnO2, FAASC achieved a superior energy storage capacity. Later, high-performance N, S-co-doped CNF/CF negative electrode is synthesized using electropolymerization of PANI nanofibers on CF, followed by the carbonization process. The assembled FAASC exhibits a wide voltage window of 2.2 V and remarkable specific capacitance of 143 F g-1 at a current density of 1 A g-1. The cell further delivers a superb energy density of 71.6 Wh kg-1 at a power density of 492.7 W kg-1, supreme cycle life and remarkable electrochemical stability under mechanical bending.

Ultra-thin and Mechanically Stable LiCoO2-Electrolyte Interphase Enabled by Mg2+ Involved Electrolyte.

LiCoO2 (LCO) cathode materials have attracted significant attention for its potential to provide higher energy density in current Lithium-ion batteries (LIBs). However, the structure and performance degradation are exacerbated by increasing voltage due to the catastrophic reaction between the applied electrolyte and delithiated LCO. The present study focuses on the construction of physically and chemically robust Mg-integrated cathode-electrolyte interface (MCEI) to address this issue, by incorporating Magnesium bis(trifluoromethanesulfonyl)imide (Mg[TFSI]2) as an electrolyte additive. During formation cycles, the strong MCEI is formed and maintained its 2 nm thickness throughout long-term cycling. Notably, Mg is detected not only in the robust MCEI, but also imbedded in the surface of the LCO lattice. As a result, the parasitic interfacial side reactions, surface phase reconstruction, particle cracking, Co dissolution and shuttling are considerably suppressed, resulting in long-term cycling stability of LCO up to 4.5 V. Therefore, benefit from the double protection of the strong MCEI, the Li||LCO coin cell and the Ah-level Graphite||LCO pouch cell exhibit high capacity retention by using Mg-electrolyte, which are 88.13% after 200 cycles and 90.4% after 300 cycles, respectively. This work provides a novel approach for the rational design of traditional electrolyte additives.

Extended Plateau Capacity of Hard Carbon Anode for High Energy Lithium-Ion Batteries.

Hard carbon materials have shown promising potential for sodium-ion storage due to accommodating larger sodium ions. However, as for lithium-ion storage, the challenge lies in tuning the high lithiation plateau capacities, which impacts the overall energy density. Here, hard carbon microspheres (HCM) are prepared by tailoring the cross-linked polysaccharide, establishing a comprehensive methodology to obtain high-performance lithium-ion batteries (LIBs) with long plateau capacities. The "adsorption-intercalation mechanism" for lithium storage is revealed combining in situ Raman characterization and ex situ nuclear magnetic resonance spectroscopy. The optimized HCM possesses reduced defect content, enriched graphitic microcrystalline, and low specific surface area, which is beneficial for fast lithium storage. Therefore, HCM demonstrates a high reversible capacity of 537 mAh g-1 with a significant low-voltage plateau capacity ratio of 55%, high initial Coulombic efficiency, and outstanding rate performance (152 mAh g-1 at 10 A g-1). Moreover, the full cell (HCM||LiCoO2) delivers outstanding fast-charging capability (4 min charge to 80% at 10 C) and impressive energy density of 393 Wh kg-1. Additionally, 80% reversible capacity can be delivered under -40 °C with competitive cycling stability. This work provides in-depth insights into the rational design of hard carbon structures with extended low-voltage plateau capacity for high energy LIBs.

Toward High-Energy-Density Initial-Anode-Free Lithium-Metal Batteries via Ultra-Thin Protective Ion-Transport-Promoting Interface Modification and Surface Prelithiation.

Anode-free lithium-metal batteries (AFLMBs) are desirable candidates for achieving high-energy-density batteries, while severe active Li+ loss and uneven Li plating/stripping behavior impede their practical application. Herein, a trilaminar LS-Cu (LiCPON + Si/C-Cu) current collector is fabricated by radio frequency magnetron sputtering, including a Si/C hybrid lithiophilic layer and a supernatant carbon-incorporated lithium phosphorus oxynitride (LiCPON) solid-state electrolyte layer. Joint experimental and computational characterizations and simulations reveal that the LiCPON solid-state electrolyte layer can decompose into an in situ stout ion-transport-promoting protective layer, which can not only regulate homogeneous Li plating/stripping behavior but also inhibit the pulverization and deactivation of Si/C hybrid lithiophilic layer. When combined with surface prelithiated Li1.2Ni0.13Co0.13Mn0.54O2 (Preli-LRM) cathode, the Preli-LRM||LS-Cu full cell delivers 896.1 Wh kg-1 initially and retains 354.1 Wh kg-1 after 50 cycles. This strategy offers an innovative design of compensating for active Li+ loss and inducing uniform Li plating/stripping behavior simultaneously for the development of AFLMBs.

Facile Preparation of High-Performance Free-Standing Micro-Supercapacitors by Optimizing Oxygen Groups on Graphene.

Free-standing micro-supercapacitor (MSC) devices without substrate or current collectors are promising for practical applications. However, it is still difficult to prepare high-performance free-standing MSC devices because of the requirement of optimized active sites, conductivity, ion diffusion, controlled patterns, moisture susceptibility, etc. Here, it is proposed that the optimization of oxygen level on graphene is promising to solve these requirements because of the balance of sp2 and sp3 hybridization. Using the medium-oxidized graphene, the flexible, conductive, hydro-stable, easy-processing film can be facilely obtained, which facilitates the preparation of free-standing MSC electrodes. After constructing with gel electrolyte, the free-standing MSC device shows a high capacitance of 898.4 mF cm-2 using aqueous-gel electrolyte and 383.6 mF cm-2 using ion-gel electrolyte with mass loading of ca. 10 mg cm-2. Correspondingly, the MSC device can achieve a landmark energy density of 42.6 µWh cm-2 at 0.85 mW cm-2 (7.1 mWh cm-3 at 141.7 mW cm-3). The advantages of high performance, facile preparation, and low inactive components make the free-standing MSC device promising for practical applications.

Application of Sodium-Rich Multifunctional Hard Carbon Synthesized via Multi-Alloy Grafting Strategy for Presodiation in High-Performance Sodium-Ion Batteries.

In sodium-ion pouch batteries based on hard carbon, an additional source of active sodium significantly enhances the battery's initial coulombic efficiency and compensates for the loss of active sodium ions during cycling. This study investigates the interaction between metallic sodium with carbon materials and develops a composite powder material of sodium-rich lithium-aluminum using a multi-alloy grafting strategy, to replenish the initial loss of active sodium in the hard carbon materials. To enhance the stability and utilization of this highly active sodium source, a novel slurry system based on polyethylene oxide (PEO) as a binder and dimethyl carbonate (DMC) as a solvent is introduced. Furthermore, this study designs a hard carbon composite electrode structure with a stable layer and sacrificial layer (NPH), which not only accommodates current battery processing environments but also demonstrates excellent potential in practical applications. Ultimately, the soft-packed sodium-ion battery consists of NPH electrodes with composite sodium ferric pyrophosphate (NFPP) and demonstrates excellent initial coulombic efficiency (91%) and ultra-high energy density (205 Wh kg-1). These results indicate significant technological and application implications for future energy storage.

Activating Ion Channels in Collapsed Hydrogel Derived Densified MXene Films with Cellulose Nanofibers to Overcome the Areal Versus Volumetric Capacitance Trade-Off.

Concomitant achievement of all three performance pillars of a supercapacitor device, namely gravimetric, areal, and volumetric capacitance is a grand challenge. Nevertheless, its fulfilment is indispensable for commercial usage. Although, high compactness is the fundamental requirement to achieve high volumetric performance, it severely affects ion transportation in thick electrodes. Such trade-off makes it extremely challenging to realize very high areal and volumetric performance simultaneously. Here, a collapsed hydrogel strategy is introduced to develop MXene/cellulose nanofiber (CNF) based densified electrodes that offer excellent ion transportation despite a massive increase in areal mass loading (>70 mg cm-2). Quasi-oriented MXene/CNF (MXCF) hydrogels are produced through an electric field-guided co-assembly technique. Ambient dehydration of these hydrogels incorporates numerous pores in the resultant compact electrodes due to crumpling of the MXene sheets, while CNF ensures connectivity among the locally blocked pores in different length scales. The resultant collapsed MXCF densified electrode shows a remarkably high areal capacitance of 16 F cm-2 while simultaneously displaying a high volumetric capacitance of 849.8 F cm-3 at an ultrahigh mass loading of up to 73.4 mg cm-2. The universality of strategy, including the co-assembly of hydrogel and its collapse, is further demonstrated to develop high-performance asymmetric and wearable devices.

Optimization of the Form Factors of Advanced Li-S Pouch Cells.

Lithium-sulfur (Li-S) batteries hold immense promise as next-generation energy storage due to their high theoretical energy density (2600 Wh kg⁻¹), low cost, and non-toxic nature. However, practical implementation faces challenges, primarily from Li polysulfide (LiPS) shuttling within the cathode and Li dendrite growth at the anode. Optimized electrodes/electrolytes design effectively confines LiPS to the cathode, boosting cycling performance in coin cells to up to hundreds of cycles. Scaling up to larger pouch cells presents new obstacles, requiring further research for long-term stability. A 1.45 Ah pouch cell, with optimized sulfur loading and electrolyte/sulfur ratio is developed, which delivers an energy density of 151 Wh kg-1 with 70% capacity retention up to 100 cycles. Targeting higher energy density (180 Wh kg-1), the developed 1Ah pouch cell exhibits 68% capacity retention after 50 cycles. Morphological analysis reveals that pouch cell failure is primarily from Li metal powdering and resulting polarization, rather than LiPS shuttling. This occurs for continuous Li ion stripping/plating during cycling, leading to dendrite growth and formation of non-reactive Li powder, especially under high currents. These issues increase ion diffusion resistance and reduce coulombic efficiency over time. Therefore, the study highlights the importance of a protected Li metal anode for achieving high-energy-dense batteries.

Polymorphic Heterogeneous Polar Structure Enabled Superior Capacitive Energy Storage in Lead-Free Relaxor Ferroelectrics at Low Electric Field.

High-performance energy storage dielectrics capable of low/moderate field operation are vital in advanced electrical and electronic systems. However, in contrast to achievements in enhancing recoverable energy density (Wrec), the active realization of superior Wrec and energy efficiency (η) with giant energy-storage coefficient (Wrec/E) in low/moderate electric field (E) regions is much more challenging for dielectric materials. Herein, lead-free relaxor ferroelectrics are reported with giant Wrec/E designed with polymorphic heterogeneous polar structure. Following the guidance of Landau phenomenological theory and rational composition construction, the conceived (Bi0.5Na0.5)TiO3-based ternary solid solution that delivers giant Wrec/E of ≈0.0168 µC cm-2, high Wrec of ≈4.71 J cm-3 and high η of ≈93% under low E of 280 kV cm-1, accompanied by great stabilities against temperature/frequency/cycling number and excellent charging-discharging properties, which is ahead of most currently reported lead-free energy storage bulk ceramics measured at same E range. Atomistic observations reveal that the correlated coexisting local rhombohedral-tetragonal polar nanoregions embedded in the cubic matrix are constructed, which enables high polarization, minimized hysteresis, and significantly delayed polarization saturation concurrently, endowing giant Wrec/E along with high Wrec and η. These findings advance the superiority and feasibility of polymorphic nanodomains in designing highly efficient capacitors for low/moderate field-region practical applications.

Pseudocapacitive Storage in Molybdenum Oxynitride Nanostructures Reactively Sputtered on Stainless-Steel Mesh Towards an All-Solid-State Flexible Supercapacitor.

Exploiting pseudocapacitance in rationally engineered nanomaterials offers greater energy storage capacities at faster rates. The present research reports a high-performance Molybdenum Oxynitride (MoON) nanostructured material deposited directly over stainless-steel mesh (SSM) via reactive magnetron sputtering technique for flexible symmetric supercapacitor (FSSC) application. The MoON/SSM flexible electrode manifests remarkable Na+-ion pseudocapacitive kinetics, delivering exceptional ≈881.83 F g-1 capacitance, thanks to the synergistically coupled interfaces and junctions between nanostructures of Mo2N, MoO2, and MoO3 co-existing phases, resulting in enhanced specific surface area, increased electroactive sites, improved ionic and electronic conductivity. Employing 3D Bode plots, b-value, and Dunn's analysis, a comprehensive insight into the charge-storage mechanism has been presented, revealing the superiority of surface-controlled capacitive and pseudocapacitive kinetics. Utilizing PVA-Na2SO4 gel electrolyte, the assembled all-solid-state FSSC (MoON/SSM||MoON/SSM) exhibits impressive cell capacitance of 30.7 mF cm-2 (438.59 F g-1) at 0.125 mA cm-2. Moreover, the FSSC device outputs a superior energy density of 4.26 µWh cm-2 (60.92 Wh kg-1) and high power density of 2.5 mW cm-2 (35.71 kW kg-1). The device manifests remarkable flexibility and excellent electrochemical cyclability of ≈91.94% over 10,000 continuous charge-discharge cycles. These intriguing pseudocapacitive performances combined with lightweight, cost-effective, industry-feasible, and environmentally sustainable attributes make the present MoON-based FSSC a potential candidate for energy-storage applications in flexible electronics.

Enhancing Electrode Performance through Triple Distribution Modulation of Active Material, Conductive Agent, and Porosity.

The increasing demand for large-scale energy storage propels the development of lithium-ion batteries with high energy and high power density. Low tortuosity electrodes with aligned straight channels have proved to be effective in building such batteries. However, manufacturing such low tortuosity electrodes in large scale remains extremely challenging. In contrast, high-performance electrodes with customized gradients of materials and porosity are possible to be made by industrial roll-to-roll coating process. Yet, the desired design of gradients combining materials and porosity is unclear for high-performance gradient electrodes. Here, triple gradient LiFePO4 electrodes (TGE) are fabricated featuring distribution modulation of active material, conductive agent, and porosity by combining suction filtration with the phase inversion method. The effects and mechanism of active material, conductive agent, and porosity distribution on electrode performance are analyzed by experiments. It is found that the electrode with a gradual increase of active material content from current collector to separator coupled with the distribution of conductive agent and porosity in the opposite direction, demonstrates the best rate capability, the fastest electrochemical reaction kinetics, and the highest utilization of active material. This work provides valuable insights into the design of gradient electrodes with high performance and high potential in application.