Chemical Profile and Potential Applications of Sclerocarya birrea (A.Rich.) Hochst. subsp. caffra (Sond.) Kokwaro Kernel Oils: Analysis of Volatile Compounds and Fatty Acids.

Sclerocarya birrea kernel volatile compounds and fatty acid methyl esters (FAMEs) from the Bubi district in Matabeleland North province of Zimbabwe were characterised by GC-MS. The volatile compounds of the oil include 65 different compounds from 24 distinct classes, dominated by 13 alcohols and 14 aldehydes (42%). Other classes include carboxylic acids, phenols, sesquiterpenes, lactones, pyridines, saturated fatty acids, ketones, and various hydrocarbons. The kernel oils revealed essential fatty acids such as polyunsaturated (α-linolenic and linoleic acids) and monounsaturated fatty acids (palmitic, palmitoleic, and oleic acids). Notably, oleic acid is the predominant fatty acid at 521.61 mg/g, constituting approximately 73% of the total fatty acids. Linoleic acid makes up 8%, and saturated fatty acids make up about 7%, including significant amounts of stearic (42.45 mg/g) and arachidic (3.46 mg/g) acids. These results validate the use of marula oils in food, pharmaceutical, and health industries, as well as in the multibillion USD cosmetics industry. Therefore, the potential applications of S. berria kernel oils are extensive, necessitating further research and exploration to fully unlock their capabilities.

Unravelling the Lipids Content and the Fatty Acid Profiles of Eight Recently Described Halophytophthora Species and H. avicennae from the South Coast of Portugal.

In this study, mycelia of eight recently described species of Halophytophthora and H. avicennae collected in Southern Portugal were analysed for lipids and fatty acids (FA) content to evaluate their possible use as alternative sources of FAs and understand how each species FAs profile relates to their phylogenetic position. All species had a low lipid percentage (0.06% in H. avicennae to 0.28% in H. frigida). Subclade 6b species contained more lipids. All species produced monounsaturated (MUFA), polyunsaturated (PUFA) and saturated (SFA) FAs, the latter being most abundant in all species. H. avicennae had the highest FA variety and was the only producer of γ-linolenic acid, while H. brevisporangia produced the lowest number of FAs. The best producer of arachidonic acid (ARA) and eicosapentaenoic acid (EPA) was H. thermoambigua with 3.89% and 9.09% of total FAs, respectively. In all species, palmitic acid (SFA) was most abundant and among the MUFAs produced oleic acid had the highest relative percentage. Principal component analysis (PCA) showed partial segregation of species by phylogenetic clade and subclade based on their FA profile. H. avicennae (Clade 4) differed from all other Clade 6 species due to the production of γ-linolenic and lauric acids. Our results disclosed interesting FA profiles in the tested species, adequate for energy (biodiesel), pharmaceutical and food industries (bioactive FAs). Despite the low amounts of lipids produced, this can be boosted by manipulating culture growth conditions. The observed interspecific variations in FA production provide preliminary insights into an evolutionary background of its production.

Comparative Evaluation of Different Targeted and Untargeted Analytical Approaches to Assess Greek Extra Virgin Olive Oil Quality and Authentication.

Extra virgin olive oil (EVOO) is a key component of the Mediterranean diet, with several health benefits derived from its consumption. Moreover, due to its eminent market position, EVOO has been thoroughly studied over the last several years, aiming at its authentication, but also to reveal the chemical profile inherent to its beneficial properties. In the present work, a comparative study was conducted to assess Greek EVOOs' quality and authentication utilizing different analytical approaches, both targeted and untargeted. 173 monovarietal EVOOs from three emblematic Greek cultivars (Koroneiki, Kolovi and Adramytiani), obtained during the harvesting years of 2018-2020, were analyzed and quantified as per their fatty acids methyl esters (FAMEs) composition via the official method (EEC) No 2568/91, as well as their bioactive content through liquid chromatography coupled to high resolution mass spectrometry (LC-HRMS) methodology. In addition to FAMEs analysis, EVOO samples were also analyzed via HRMS-untargeted metabolomics and optical spectroscopy techniques (visible absorption, fluorescence and Raman). The data retrieved from all applied techniques were analyzed with Machine Learning methods for the authentication of the EVOOs' variety. The models' predictive performance was calculated through test samples, while for further evaluation 30 commercially available EVOO samples were also examined in terms of variety. To the best of our knowledge, this is the first study where different techniques from the fields of standard analysis, spectrometry and optical spectroscopy are applied to the same EVOO samples, providing strong insight into EVOOs chemical profile and a comparative evaluation through the different platforms.

Five novel bifidobacterial species isolated from faeces of primates in two Czech zoos: Bifidobacterium erythrocebi sp. nov., Bifidobacterium moraviense sp. nov., Bifidobacterium oedipodis sp. nov., Bifidobacterium olomucense sp. nov. and Bifidobacterium panos sp. nov.

Five Bifidobacterium strains, VB23T, VB24T, VB25T, VB26T and VB31T, were isolated from chimpanzee (Pan troglodytes), cotton-top tamarin (Saguinus oedipus), Goeldi's marmoset (Callimico goeldii), moustached tamarin (Saguinus mystax) and patas monkey (Erythrocebus patas), respectively, which were kept in two Czech zoos. These strains were isolated from faecal samples and were Gram-positive, non-motile, non-sporulating, anaerobic and fructose-6-phosphate phosphoketolase-positive. Phylogenetic analyses based on 16S rRNA revealed close relatedness between VB23T and Bifidobacterium angulatum LMG 11039T (96.0 %), VB24T and Bifidobacterium pullorum subsp. pullorum DSM 20433T (96.1 %), VB25T and Bifidobacterium goeldii LMG 30939T (96.5 %), VB26T and Bifidobacterium imperatoris LMG 30297T (98.1 %), and VB31T and B. angulatum LMG 11039T (99.40 %). Internal transcribed spacer profiling revealed that VB23T, VB24T, VB25T, VB26T and VB31T had highest similarity to Bifidobacterium breve LMG 13208T (77.2 %), Bifidobacterium longum subsp. infantis ATCC 15697T (85.8 %), Bifidobacterium biavatii DSM 23969T (76.9 %), B. breve LMG 13208T (81.2 %) and B. angulatum LMG 11039T (88.2 %), respectively. Average nucleotide identity (ANI) and digital DNA-DNA hybridization (dDDH) analyses with their closest neighbours supported the independent phylogenetic positions of the strains with values between 86.3 and 94.3 % for ANI and 25.8 and 54.9 % for dDDH. These genomic and phylogenetic analyses suggested that the evaluated strains were novel Bifidobacterium species named Bifidobacterium erythrocebi sp. nov. (VB31T=DSM 109960T=CCUG 73843T), Bifidobacterium moraviense sp. nov. (VB25T=DSM 109958T=CCUG 73842T), Bifidobacterium oedipodis sp. nov. (VB24T=DSM 109957T=CCUG 73932T), Bifidobacterium olomucense sp. nov. (VB26T=DSM 109959T=CCUG 73845T) and Bifidobacterium panos sp. nov. (VB23T=DSM 109963T=CCUG 73840T).

Cell membrane fatty acid and pigment composition of the psychrotolerant cyanobacterium Nodularia spumigena CHS1 isolated from Hopar glacier, Pakistan.

In the present study, cyanobacterium isolate CHS1 isolated from Hopar glacier, Pakistan, was analyzed for the first time for cell membrane fatty acids and production of pigments. Sequencing of the 16-23S intergenetic region confirmed identification of the isolate CHS1 as Nodularia spumigena. All chlorophyll and carotenoid pigments were quantified using high-performance liquid chromatography and experiments to test tolerance against a range of physico-chemical conditions were conducted. Likewise, the fatty acid profile of the cell membrane CHS1 was analyzed using gas chromatography and mass spectroscopy. The cyanobacterium isolate CHS1 demonstrated tolerance to 8 g/L% NaCl, 35°C and pH 5-9. The characteristic polyunsaturated fatty acid (PUFA) of isolate CHS1, C18:4, was observed in fatty acid methyl esters (FAMEs) extracted from the cell membrane. CHS1 was capable of producing saturated fatty acids (SFA) (e.g., C16:0), monounsaturated fatty acids (MUFA) (e.g., C18:1) and polyunsaturated fatty acids (e.g., C20:5) in the cell membrane. In this study, we hypothesize that one mechanism of cold adaptation displayed by isolate CHS1 is the accumulation of high amounts of PUFA in the cell membrane.

Conversion of sugar beet residues into lipids by Lipomyces starkeyi for biodiesel production.

BACKGROUND: Lipids from oleaginous yeasts emerged as a sustainable alternative to vegetable oils and animal fat to produce biodiesel, the biodegradable and environmentally friendly counterpart of petro-diesel fuel. To develop economically viable microbial processes, the use of residual feedstocks as growth and production substrates is required. RESULTS: In this work we investigated sugar beet pulp (SBP) and molasses, the main residues of sugar beet processing, as sustainable substrates for the growth and lipid accumulation by the oleaginous yeast Lipomyces starkeyi. We observed that in hydrolysed SBP the yeast cultures reached a limited biomass, cellular lipid content, lipid production and yield (2.5 g/L, 19.2%, 0.5 g/L and 0.08 g/g, respectively). To increase the initial sugar availability, cells were grown in SBP blended with molasses. Under batch cultivation, the cellular lipid content was more than doubled (47.2%) in the presence of 6% molasses. Under pulsed-feeding cultivation, final biomass, cellular lipid content, lipid production and lipid yield were further improved, reaching respectively 20.5 g/L, 49.2%, 9.7 g/L and 0.178 g/g. Finally, we observed that SBP can be used instead of ammonium sulphate to fulfil yeasts nitrogen requirement in molasses-based media for microbial oil production. CONCLUSIONS: This study demonstrates for the first time that SBP and molasses can be blended to create a feedstock for the sustainable production of lipids by L. starkeyi. The data obtained pave the way to further improve lipid production by designing a fed-batch process in bioreactor.

Novel biotechnological approaches for monitoring and immunization against resistant to antibiotics Escherichia coli and other pathogenic bacteria.

The application of next-generation molecular, biochemical and immunological methods for developing new vaccines, antimicrobial compounds, probiotics and prebiotics for zoonotic infection control has been fundamental to the understanding and preservation of the symbiotic relationship between animals and humans. With increasing rates of antibiotic use, resistant bacterial infections have become more difficult to diagnose, treat, and eradicate, thereby elevating the importance of surveillance and prevention programs. Effective surveillance relies on the availability of rapid, cost-effective methods to monitor pathogenic bacterial isolates. In this opinion article, we summarize the results of some research program initiatives for the improvement of live vaccines against avian enterotoxigenic Escherichia coli using virulence factor gene deletion and engineered vaccine vectors based on probiotics. We also describe methods for the detection of pathogenic bacterial strains in eco-environmental headspace and aerosols, as well as samples of animal and human breath, based on the composition of volatile organic compounds and fatty acid methyl esters. We explain how the introduction of these low-cost biotechnologies and protocols will provide the opportunity to enhance co-operation between networks of resistance surveillance programs and integrated routine workflows of veterinary and clinical public health microbiology laboratories.

Comparative fatty acid profiling of Indian seabuckthorn showed altitudinal gradient dependent species-specific variations.

The present study provides the first comparative fatty acid profiling of the three Indian seabuckthorn species, collected from varying altitudes (2900-4300 masl) of Trans-Himalayas (Hippophae rhamnoides, H. tibetana) and Sikkim Himalayas (H. salicifolia) regions. Gas chromatography-mass spectrometry analysis showed variability in fatty acid composition of different seabuckthorn populations. Sikkim populations showed higher (1.28-1.6 folds) palmitic acid than Trans-Himalayan populations which possess higher linoleic (1.3-1.5 folds) and linolenic (1.6-1.8 folds) acids. Interestingly, a strong altitudinal gradient associated positive correlation was observed with the degree of unsaturation and PUFA content while negative correlation was observed with saturated fatty acids content of different seabuckthorn populations. H. salicifolia collected from Sikkim showed healthy ω-6:ω-3 ratio (closer to 1:1) of functional lipids exhibiting its better nutraceutical potential than other commonly used seed oils. Interestingly, H. tibetana from Losar showed higher (5.81) degree of unsaturation than Sikkim populations (3.5) suggesting its better stress tolerance trait. Chemo-taxonomic diversity analysis also formed two broad clusters of Trans-Himalayan and Sikkim populations which correlated with earlier taxonomic studies.

Investigation of mycobacteria fatty acid profile using different ionization energies in GC-MS.

Gas chromatography (GC) coupled with electron ionization (EI) mass spectrometry (MS) is a well-established technique for the analysis of volatile and semi-volatile compounds. The main advantage is the highly repeatable fragmentation of the compounds into the ion source, generating intense and diagnostic fragmentation when the ionization is performed at 70 eV; this is considered the standard ionization condition and has been used for creating many established databases, which are of great support in the analyte identification process. However, such an intense fragmentation often causes the loss of the molecular ion or more diagnostic ions, which can be detrimental for the identification of homologous series or isomers, as for instance fatty acids. To obtain this information chemical or soft ionization can be used, but dedicated ion sources and conditions are required. In this work, we explored different ionization voltages in GC-EI-MS to preserve the intensity of the molecular ion using a conventional quadrupole MS. Twenty, 30, 50, and 70 eV were tested using a mixture of fatty acid methyl esters standards. Intensity and repeatability of the most informative ions were compared. Twenty and 70 eV were then used to analyze the fatty acid composition of six different strains of mycobacteria. Two approaches were used for elaborating the data: (1) a single average spectrum of the entire chromatogram was derived, which can be considered (in terms of concept) as a direct EI-MS analysis; (2) the actual chromatographic separation of the compounds was considered after automatic alignment. The results obtained are discussed herein. Graphical abstract ᅟ.

Phosphorus removal coupled to bioenergy production by three cyanobacterial isolates in a biofilm dynamic growth system.

In the present study a closed incubator, designed for biofilm growth on artificial substrata, was used to grow three isolates of biofilm-forming heterocytous cyanobacteria using an artificial wastewater secondary effluent as the culture medium. We evaluated biofilm efficiency in removing phosphorus, by simulating biofilm-based tertiary wastewater treatment and coupled this process with biodiesel production from the developed biomass. The three strains were able to grow in the synthetic medium and remove phosphorus in percentages, between 6 and 43%, which varied between strains and also among each strain according to the biofilm growth phase. Calothrix sp. biofilm turned out to be a good candidate for tertiary treatment, showing phosphorus reducing capacity (during the exponential biofilm growth) at the regulatory level for the treated effluent water being discharged into natural water systems. Besides phosphorus removal, the three cyanobacterial biofilms produced high quality lipids, whose profile showed promising chemical stability and combustion behavior. Further integration of the proposed processes could include the integration of oil extracted from these cyanobacterial biofilms with microalgal oil known for high monounsaturated fatty acids content, in order to enhance biodiesel cold flow characteristics.

Theoretical and Kinetic Tools for Selecting Effective Antioxidants: Application to the Protection of Omega-3 Oils with Natural and Synthetic Phenols.

Radical-scavenging antioxidants play crucial roles in the protection of unsaturated oils against autoxidation and, especially, edible oils rich in omega-3 because of their high sensitivity to oxygen. Two complementary tools are employed to select, among a large set of natural and synthetic phenols, the most promising antioxidants. On the one hand, density functional theory (DFT) calculations provide bond dissociation enthalpies (BDEs) of 70 natural (i.e., tocopherols, hydroxybenzoic and cinnamic acids, flavonoids, stilbenes, lignans, and coumarins) and synthetic (i.e., 2,6-di-tert-butyl-4-methylphenol (BHT), 3-tert-butyl-4-hydroxyanisol (BHA), and tert-butylhydroquinone (TBHQ)) phenols. These BDEs are discussed on the basis of structure-activity relationships with regard to their potential antioxidant activities. On the other hand, the kinetic rate constants and number of hydrogen atoms released per phenol molecule are measured by monitoring the reaction of phenols with 2,2-diphenyl-1-picrylhydrazyl (DPPH(•)) radical. The comparison of the results obtained with these two complementary methods allows highlighting the most promising antioxidants. Finally, the antioxidant effectiveness of the best candidates is assessed by following the absorption of oxygen by methyl esters of linseed oil containing 0.5 mmol L(-1) of antioxidant and warmed at 90 °C under oxygen atmosphere. Under these conditions, some natural phenols namely epigallocatechin gallate, myricetin, rosmarinic and carnosic acids were found to be more effective antioxidants than α-tocopherol.

Methyl oleate for plant protection products formulations: Enzymatic synthesis, reaction kinetics and application testing.

This study presents a solvent-free enzymatic approach for the synthesis of fatty acid methyl esters (FAMEs), such as methyl oleate, for their application as adjuvant in plant protection products (PPP) formulations. The direct esterification between free fatty acid and methanol was optimized to achieve 98% acid conversion. The kinetics of this conversion was accurately described by a simple second order mechanism and non-linear regression was applied to calculate the rate constants of the forward and backward reactions based on full progress curves data. The rate constant of the forward reaction (synthesis) was one order of magnitude higher than the backward reaction (hydrolysis) and favored formation of the target methyl ester product, rendering the removal of water unnecessary. Enzymatically synthesized methyl oleate was benchmarked against the chemically synthesized compound, showing matching results in terms of stability, spreadability and emulsifying capacity in plant care formulations. The enzymatic synthesis of FAMEs under solvent free conditions allows to achieve a safer and more sustainable character for carrier solvents in PPP formulations.

Indigenous microalgae strains characterization for a sustainable biodiesel production.

Microalgae have been widely recognized as a promising feedstock for sustainable biofuels production to tackle global warming and pollution issues related to fossil fuels uses. This study identified and analyzed indigenous microalgae strains for biodiesel production, specifically Chlorella vulgaris and Coelastrella thermophila var. globulina, from two distinct locations in Algeria. Molecular identification confirmed their identity, and the microalgae exhibited notable growth characteristics. Local Chlorella vulgaris and Coelastrella thermophila var. globulina showed good growth and high biomass yield, compared to Chlorella vulgaris CCAP211/11B reaching a weight of 1.48 g L-1 , 1.95 g L-1 , and 2.10 g L-1 , respectively. Lipids content of local Chlorella vulgaris, Coelastrella thermophila var. globulina, and Chlorella vulgaris CCAP211/11B, were found to be 31.39 ± 3.3%, 17 ± 2.26%, and 19 ± 0.64%, respectively. Chlorella vulgaris stood out as a candidate for biodiesel production due to its equilibrium between SFA and PUFA (43.24% and 45.27%). FAs are predominated by SFA and MUFA for Coelastrella thermophila var. globulina with value of 81.49% (SFA+MUFA). Predicted biodiesel qualities comply with ASTM6751 and EN14214 standards. Studied microalgae have therefore a promising potential for biodiesel production. However, optimising cultivation conditions is necessary to enhance biomass and lipids yield at a large scale.

Effect of derivatization method (KOH and BF3) on fatty acid profile data of boiled Tetracarpidium conophorum, and egusi pudding oils.

Fatty acids are present in many foods, either free or esterified. Their presence helps to characterize and classify the food. The nature of these fatty acids is also associated with the treatments applied. To assess the fatty acid profile of these matrices, extractions are carried out using different solvents that influence the nature and lipid profile. The subsequent derivatization of fatty acids to more volatile fatty acyl methyl esters (FAMEs) prior to determination of the fatty acid profile takes into account the nature of the extraction solvent. Thus, the present work proposes to determine the fatty acid profile by Gas Chromatography Flame Ionisation Detector (GC-FID) of two lipid extracts derivatized by the MeOH/KOH and Hexane/MeOH/MeOH-BF3 procedures. Freshly harvested Tetracarpidium conophorum nuts from fields in the Fombap locality were brought to the laboratory where they were boiled (95 °C; 30 min), shelled, cut into small cubes and dried for 48 h at 45 °C. The dried seeds were ground and the resulting paste macerated in hexane for 48 h. The liquid fraction obtained was concentrated using a rotavapor, and the lipid extracts were stored at -15 °C. The egusi pudding was obtained by mixing 100 g of egusi seed paste with 0.50 g of white Piper nigrum powders, then packed in bulrush leaves and steamed for 120 min. After cooking, the product was stored for 4 days at room temperature and reheated twice a day. At the end of the last day, the lipid fraction oil was extracted following the methodology of Bligh and Dyer [1], then concentrated and preserved as before. The lipid extracts were then methylated using MeOH/KOH and Hexane/MeOH/MeOH-BF3 methods before injection into a GC-FID equipped with a Stabil Wax®-DA column. Supelco's standard mix of 37 FAMEs was used to identify and quantify the fatty acids present in the various samples. The results obtained enable us to identify the different fatty acids according to the retention time of their corresponding FAMEs and to quantify them. The fatty acids obtained were classified as saturated and unsaturated (mono and polyunsaturated). These analyses showed that the rapid derivatization method (MeOH/KOH) identified the same number of fatty acids as the Hexane/MeOH/MeOH-BF3 method in the lipid extract from the egusi pudding, whereas the Hexane/MeOH/MeOH-BF3 method identified four more fatty acids in the lipid extract coming from Tetracarpidium conophorum. Although the number of fatty acids was similar, the derivatization method influenced the nature of the fatty acids in the egusi pudding lipid extract. Overall, polyunsaturated fatty acids were the most abundant in the different oils. Omega-3 were the majority subclass in Tetracarpidium conophorum nuts, while omega-6 were in egusi pudding. The derivatization method did not influence the majority fatty acid (alpha linolenic) in Tetracarpidium conophorum nuts, whereas derivatization with BF3 gave trans linoleic and KOH cis linoleic in egusi pudding. These results show that the choice of derivatization method for fatty acid profiling and quantification is very important and depends on the technique and extraction solvents used.

Evaluation of fuel properties for possible biodiesel output based on the fatty acid composition of oleaginous plants and microalgae.

In the past decade, there has been a significant rise in sustainable biomass based biofuel production to address energy needs while mitigating environmental impacts. Traditionally, bioethanol was used for biofuel production, but concerns over food security and environmental preservation have led to growing interest in alternative sources such as neutral lipids from vegetable oil and microalgae for biodiesel production. This research paper evaluates the potential of various oleaginous plants and microalgae as feedstocks for biodiesel production, with a focus on their fatty acid composition and its impact on biodiesel properties. The study examines the fatty acid profiles of 43 different plant and microalgae species and employs various equations to estimate key physical properties of biodiesel. Additionally, the communication compares these properties to International Biodiesel Standards (EN 14214 and ASTM D6751-08) to assess the suitability of the derived biodiesel for commercial use. It is impossible to describe a single composition that is optimal in terms of all essential fuel properties due to the opposing effects of some structural features of the Fatty Acid Methyl Esters (FAME). However, biodiesel should contain relatively low concentrations of both long chain saturated and polyunsaturated FAME to ensure adequate efficiency in terms of low temperature operability and oxidative stability. The results reveal significant variations in properties amongst different feedstocks, highlighting the importance of feedstock selection in biodiesel production. The study also establishes correlations between various fuel properties, providing valuable insights in to optimizing biodiesel production processes, which will be of great use to researchers, engineers, and stakeholders involved in biodiesel production.

Fingerprinting of monovarietal olive oils from Argentina and Uruguay via stable isotope, fatty acid profile, and chemometric analyses.

Tracing methods of non-European EVOOs commercialized worldwide are becoming crucial for effective authenticity controls. Limited analytical studies of these oils are available on a global scale, similar to those of European EVOOs. We report for the first time the fatty acid concentrations, bulk-oil 2H/1H, 13C/12C, and 18O/16O ratios and fatty acid 13C/12C ratios of 43 authentic monovarietal EVOOs from different geographical regions in Argentina and Uruguay. The samples were obtained from a wide range of latitudes and altitudes along an E-W profile, from lowlands near the Atlantic Ocean to the pre-Andean highlands near the Pacific Ocean. Principal component scores were used to cluster EVOOs into three groups- central-western Argentina, central Argentina, and Uruguay-based on nine stable isotope ratios and the oleic-linoleic acid concentration ratio. The bulk 2H/1H and 18O/16O values and 13C/12C of palmitoleic and linoleic acids provide good tools for differentiating these oils via linear discriminant analysis.

Migration and distribution characteristics of typical organic pollutants in condensable particulate matter of coal-fired flue gas and by-products of wet flue gas desulfurization system.

The wet flue gas desulfurization (WFGD) system of coal-fired power plants shows a good removal effect on condensable particulate matter (CPM), reducing the dust removal pressure for the downstream flue gas purification devices. In this work, the removal effect of a WFGD system on CPM and its organic pollutants from a coal-fired power plant was studied. By analyzing the organic components of the by-products emitted from the desulfurization tower, the migration characteristics of organic pollutants in gas, liquid, and solid phases, as well as the impact of desulfurization towers on organic pollutants in CPM, were discussed. Results show that more CPM in the flue gas was generated by coal-fired units at ultra-low load, and the WFGD system had a removal efficiency nearly 8% higher than that at full load. The WFGD system had significant removal effect on two typical esters, especially phthalate esters (PAEs), with the highest removal efficiency of 49.56%. In addition, the WFGD system was better at removing these two esters when the unit was operating at full load. However, it had a negative effect on n-alkanes, which increased the concentration of n-alkanes by 8.91 to 19.72%. Furthermore, it is concluded that the concentration distribution of the same type of organic pollutants in desulfurization wastewater was similar to that in desulfurization slurry, but quite different from that in coal-fired flue gas. The exchange of three organic pollutants between flue gas and desulfurization slurry was not significant, while the concentration distribution of organic matters in gypsum was affected by coal-fired flue gas.

Directional methanolysis of kitchen waste for the co-production of methyl levulinate and fatty acid methyl esters: Catalytic strategy and machine learning modeling.

To add value to ordinary kitchen waste, heterogeneous acid-base catalytic methanolysis was conducted to produce high-value liquid biofuels, methyl levulinate (ML) and fatty acid methyl esters (FAMEs). Yields of 53.3 % ML and 98.5 % FAME were achieved by methanolysis of kitchen waste under the co-catalysis of carbon-silica composite (C/Si-SO3H) and zirconium modified ultrastable Y zeolite (Zr/USY). These target products can be easily recovered from the methanolic phase and can be purified at the end of the reaction. The collaborative combination of C/Si-SO3H and Zr/USY exhibited higher activity than their commercial counterpart. This strategy can be applied to differently composed kitchen waste and kitchen waste with different water content. Product yields were predicted using an artificial neural network method, and the relative importance of the influencing factors was investigated by the random forest method. The systematic insight gained from this work supports the value-added utilization of kitchen waste.

Optimization of Rhodococcus erythropolis JCM3201T Nutrient Media to Improve Biomass, Lipid, and Carotenoid Yield Using Response Surface Methodology.

The oleaginous bacterium Rhodococcus erythropolis JCM3201T offers various unique enzyme capabilities, and it is a potential producer of industrially relevant compounds, such as triacylglycerol and carotenoids. To develop this strain into an efficient production platform, the characterization of the strain's nutritional requirement is necessary. In this work, we investigate its substrate adaptability. Therefore, the strain was cultivated using nine nitrogen and eight carbon sources at a carbon (16 g L-1) and nitrogen (0.16 g L-1) weight ratio of 100:1. The highest biomass accumulation (3.1 ± 0.14 g L-1) was achieved using glucose and ammonium acetate. The highest lipid yield (156.7 ± 23.0 mg g-1DCW) was achieved using glucose and yeast extract after 192 h. In order to enhance the dependent variables: biomass, lipid and carotenoid accumulation after 192 h, for the first time, a central composite design was employed to determine optimal nitrogen and carbon concentrations. Nine different concentrations were tested. The center point was tested in five biological replicates, while all other concentrations were tested in duplicates. While the highest biomass (8.00 ± 0.27 g L-1) was reached at C:N of 18.87 (11 g L-1 carbon, 0.583 g L-1 nitrogen), the highest lipid yield (100.5 ± 4.3 mg g-1DCW) was determined using a medium with 11 g L-1 of carbon and only 0.017 g L-1 of nitrogen. The highest carotenoid yield (0.021 ± 0.001 Abs454nm mg-1DCW) was achieved at a C:N of 12 (6 g L-1 carbon, 0.5 g L-1 nitrogen). The presented results provide new insights into the physiology of R. erythropolis under variable nutritional states, enabling the selection of an optimized media composition for the production of valuable oleochemicals or pigments, such as rare odd-chain fatty acids and monocyclic carotenoids.

The Ancient Olive Trees (Olea europaea L.) of the Maltese Islands: A Rich and Unexplored Patrimony to Enhance Oliviculture.

A prospecting campaign in the Maltese Islands has ensured the survival of several ancient olive trees (Olea europaea L.), genetically distant from known cultivars. Most of these plants were abandoned or partially cultivated. A two-year evaluation of fruit characteristics and compositions was performed on samples collected from the main representatives of these indigenous genotypes. Analyses were carried out using Gas Chromatography, High-Performance Liquid Chromatography and Near Infrared Spectrometry. Among the fruit samples, a wide range of variations was observed. Some of the genotypes showed fruit traits suitable for table olive production. This is the case of samples with a pulp/pit ratio higher than four, such as 1Wardija, 1Caritas, 1Plattini, 1Bingemma Malta and 3Loretu, whilst 1Bidni, 1Mellieha, 2Qnotta, 3Loretu, 1Bingemma Malta and 1Caritas were suitable for dual purpose. The total phenol content ranged from 6.3 (1Wardija) to 117.9 (2Mtarfa) g/kg of fresh pulp. The average percentage of MUFA was quite low for most of the varieties. These genotypes, which presumably originated in the Maltese Islands and are well adapted to the local pedo-climatic conditions, are being propagated for the following evaluation of their bio-agronomical performance (production, suitability to intensive cultivation, environmental sustainability, product quality, etc.). The purpose is to select, among these local genotypes, the most outstanding varieties, in terms of phenolic and FA profile and agronomical potential, to spread into cultivation, thereby contributing to an increase in the quality of the local table and olive oil production, strongly linked to the territory.