RESUMEN
Although mechanically interlocked molecules (MIMs) display unique properties and functions associated with their intricate connectivity, limited assembly strategies are available for their synthesis. Herein, we presented a synergistic assembly strategy based on coordination and noncovalent interactions (π-π stacking and CHâ¯π interactions) to selectively synthesize molecular closed three-link chains ([Formula: see text] links), highly entangled figure-eight knots ([Formula: see text] knots), trefoil knot ([Formula: see text] knot), and Borromean ring ([Formula: see text] link). [Formula: see text] links can be created by the strategic assembly of nonlinear multicurved ligands incorporating a furan or phenyl group with the long binuclear half-sandwich organometallic Cp*RhIII (Cp* = η5-pentamethylcyclopentadienyl) clip. However, utilizing much shorter binuclear Cp*RhIII units for union with the 2,6-naphthyl-containing ligand led to a [Formula: see text] knot because of the increased π-π stacking interactions between four consecutive stacked layers and CHâ¯π interactions. Weakening such π-π stacking interactions resulted in a [Formula: see text] knot. The universality of this synergistic assembly strategy for building [Formula: see text] knots was verified by utilizing a 1,5-naphthyl-containing ligand. Quantitative conversion between the [Formula: see text] knot and the simple macrocycle species was accomplished by adjusting the concentrations monitored by NMR spectroscopy and electrospray ionization mass spectrometry (ESI-MS). Furthermore, increasing the stiff π-conjugated area of the binuclear unit afforded molecular Borromean ring, and this topology is a topological isomer of the [Formula: see text] link. These artificial metalla-links and metalla-knots were confirmed by single-crystal X-ray diffraction, NMR and ESI-MS. The results offer a potent strategy for building higher-order MIMs and emphasize the critical role that noncovalent interactions play in creating sophisticated topologies.
RESUMEN
Understanding the frequency and structural context of discrete noncovalent interactions between nucleotides is of pivotal significance in establishing the rules that govern RNA structure and dynamics. Although T-shaped contacts (i.e., perpendicular stacking contacts) between aromatic amino acids and nucleobases at the nucleic acid-protein interface have recently garnered attention, the analogous contacts within the nucleic acid structures have not been discussed. In this work, we have developed an automated method for identifying and unambiguously classifying T-shaped interactions between nucleobases. Using this method, we identified a total of 3261 instances of T-shaped (perpendicular stacking) contacts between two nucleobases in an array of RNA structures from an up-to-date data set of ≤3.5 Å resolution crystal structures deposited in the Protein Data Bank.
Asunto(s)
Ácidos Nucleicos , ARN , ARN/química , ADN/química , Nucleótidos/químicaRESUMEN
Native top-down mass spectrometry (nTDMS) allows characterization of protein structure and noncovalent interactions with simultaneous sequence mapping and proteoform characterization. The majority of nTDMS studies utilize purified recombinant proteins, with significant challenges hindering application to endogenous systems. To perform native top-down proteomics (nTDP), where endogenous proteins from complex biological systems are analyzed by nTDMS, it is essential to separate proteins under nondenaturing conditions. However, it remains difficult to achieve high resolution with MS-compatible online chromatography while preserving protein tertiary structure and noncovalent interactions. Herein, we report the use of online mixed-bed ion exchange chromatography (IEC) to enable separation of endogenous proteins from complex mixtures under nondenaturing conditions, preserving noncovalent interactions for nTDP analysis. We have successfully detected large proteins (>146 kDa) and identified endogenous metal-binding and oligomeric protein complexes in human heart tissue lysate. The use of a mixed-bed stationary phase allowed retention and elution of proteins over a wide range of isoelectric points without altering the sample or mobile phase pH. Overall, our method provides a simple online IEC-MS platform that can effectively separate proteins from complex mixtures under nondenaturing conditions and preserve higher-order structure for nTDP applications.
Asunto(s)
Proteómica , Cromatografía por Intercambio Iónico/métodos , Humanos , Proteómica/métodos , Miocardio/química , Espectrometría de Masas/métodos , Mezclas Complejas/química , Proteínas/química , Proteínas/análisis , Proteínas/aislamiento & purificaciónRESUMEN
Structures at serine-proline sites in proteins were analyzed using a combination of peptide synthesis with structural methods and bioinformatics analysis of the PDB. Dipeptides were synthesized with the proline derivative (2S,4S)-(4-iodophenyl)hydroxyproline [hyp(4-I-Ph)]. The crystal structure of Boc-Ser-hyp(4-I-Ph)-OMe had two molecules in the unit cell. One molecule exhibited cis-proline and a type VIa2 ß-turn (BcisD). The cis-proline conformation was stabilized by a C-H/O interaction between Pro C-Hα and the Ser side-chain oxygen. NMR data were consistent with stabilization of cis-proline by a C-H/O interaction in solution. The other crystallographically observed molecule had trans-Pro and both residues in the PPII conformation. Two conformations were observed in the crystal structure of Ac-Ser-hyp(4-I-Ph)-OMe, with Ser adopting PPII in one and the ß conformation in the other, each with Pro in the δ conformation and trans-Pro. Structures at Ser-Pro sequences were further examined via bioinformatics analysis of the PDB and via DFT calculations. Ser-Pro versus Ala-Pro sequences were compared to identify bases for Ser stabilization of local structures. C-H/O interactions between the Ser side-chain Oγ and Pro C-Hα were observed in 45% of structures with Ser-cis-Pro in the PDB, with nearly all Ser-cis-Pro structures adopting a type VI ß-turn. 53% of Ser-trans-Pro sequences exhibited main-chain COiâ¢â¢â¢HNi+3 or COiâ¢â¢â¢HNi+4 hydrogen bonds, with Ser as the i residue and Pro as the i + 1 residue. These structures were overwhelmingly either type I ß-turns or N-terminal capping motifs on α-helices or 310-helices. These results indicate that Ser-Pro sequences are particularly potent in favoring these structures. In each, Ser is in either the PPII or ß conformation, with the Ser Oγ capable of engaging in a hydrogen bond with the amide N-H of the i + 2 (type I ß-turn or 310-helix; Ser χ1 t) or i + 3 (α-helix; Ser χ1 g+) residue. Non-proline cis amide bonds can also be stabilized by C-H/O interactions.
RESUMEN
The use of noncovalent interactions (NCIs) has received significant attention as a pivotal synthetic handle. Recently, the exploitation of unconventional NCIs has gained considerable traction in challenging reaction manifolds such as glycosylation due to their capacity to facilitate entry into difficult-to-access sugars and glycomimetics. While investigations involving oxacyclic pyrano- or furanoside scaffolds are relatively common, methods that allow the selective synthesis of biologically important iminosugars are comparatively rare. Here, we report the capacity of a phosphonochalcogenide (PCH) to catalyze the stereoselective α-iminoglycosylation of iminoglycals with a wide array of glycosyl acceptors with remarkable protecting group tolerance. Mechanistic studies have illuminated the counterintuitive role of the catalyst in serially activating both the glycosyl donor and acceptor in the up/downstream stages of the reaction through chalcogen bonding (ChB). The dynamic interaction of chalcogens with substrates opens up new mechanistic opportunities based on iterative ChB catalyst engagement and disengagement in multiple elementary steps.
RESUMEN
Conformational ensemble generation and the search for the global minimum conformation are important problems in computational chemistry. In this work, a variant on the conformer-rotamer ensemble sampling tool (CREST) iterative metadynamics (iMTD) algorithm designed for determining structural ensembles and energetics of noncovalent clusters of flexible molecules is presented. We term this new algorithm a low-energy diversity-enhanced variant on CREST, or LEDE-CREST. As with CREST, the energies are evaluated using the semiempirical GFN2-xTB extended tight binding approach. The utility of the algorithm is highlighted by generating ensembles for a variety of noncovalent clusters of flexible or rigid monomers using both CREST and LEDE-CREST.
RESUMEN
Time-dependent double hybrids with spin-component or spin-opposite scaling to their second-order perturbative correlation correction have demonstrated competitive robustness in the computation of electronic excitation energies. Some of the most robust are those recently published by our group (M. Casanova-Páez, L. Goerigk, J. Chem. Theory Comput. 2021, 20, 5165). So far, the implementation of these functionals has not allowed correctly calculating their ground-state total energies. Herein, we define their correct spin-scaled ground-state energy expressions which enables us to test our methods on the noncovalent excited-state interaction energies of four aromatic excimers. A range of 22 double hybrids with and without spin scaling are compared to the reasonably accurate wavefunction reference from our previous work (A. C. Hancock, L. Goerigk, RSC Adv. 2023, 13, 35964). The impact of spin scaling is highly dependent on the underlying functional expression, however, the smallest overall errors belong to spin-scaled functionals with range separation: SCS- and SOS- ω PBEPP86, and SCS-RSX-QIDH. We additionally determine parameters for DFT-D3(BJ)/D4 ground-state dispersion corrections of these functionals, which reduce errors in most cases. We highlight the necessity of dispersion corrections for even the most robust TD-DFT methods but also point out that ground-state based corrections are insufficient to completely capture dispersion effects for excited-state interaction energies.
RESUMEN
Selective separation and conversion of furan-based biomass-derived compounds, which are closely related to biorefineries, is currently an important issue. To improve their performance, it is important to deepen the understanding of non-covalent interactions that act on the molecular recognition of furanic compounds on separation or catalyst matrices. Here, a new method is reported to comprehensively visualize such intermolecular interactions using a porous supramolecular crystalline probe with polar and non-polar binding sites within a low-symmetric nanochannel consisting of four isomeric PdII 3-macrocycles. Single-crystal X-ray diffraction analysis of the crystals including 5-hydroxymethylfurfural, furfural, furfuryl alcohol, or 2-acetylfuran reveals a variety of interactions involving their furan rings and polar substituents. It is also found that cooperative and competitive effects between guest and solvent molecules significantly change their recognition mode.
RESUMEN
A pair of isomers, IDT-BOF containing Sâ â â O/Fâ â â H noncovalently configurational locks and IDT-BFO containing Fâ â â H/Oâ â â H noncovalently configurational locks, with an acceptor-π-donor-π-acceptor (A-π-D-π-A) structure have been designed and synthesized by choosing 4,9-dihydro-s-indaceno[1,2-b : 5,6-b']dithiophene (IDT) as the D unit, an F/n-hexyloxy substituted phenyl ring as π bridge, and 3-(dicyanomethylidene)indan-1-one as the A unit. Owing to the Sâ â â O/Fâ â â H or Fâ â â H/Oâ â â H noncovalently configurational locks, both IDT-BOF and IDT-BFO have a completely planar structure. IDT-BOF exhibits a similar LUMO to IDT-BFO, but higher HOMO energy levels, leading to a smaller optical bandgap and red-shifted absorption. However, IDT-BOF-based bulk-heterojunction organic solar cells (BHJ-OSCs) coupled with PBDB-T, and PCE-10 as donor materials both exhibited a lower PCE than that of IDT-BFO (PBDB-T: 5.2 vs. 6.1 %; PCE-10: 1.7 vs. 3.2 %). Comprehensively comparing and investigating IDT-BOF : PBDB-T and IDT-BFO : PBDB-T OSCs suggested that the large phase separation and serious charge recombination of IDT-BOF-based OSCs contributed to its lower power conversion efficiency. Importantly, ternary solar cells based on PBDB-T : Y5 as control devices with an additional 10 % IDT-BFO exhibited a 5 % enhancement in the PCE compared to the control device (14.3 vs. 13.46 %).
RESUMEN
We report a sensitive method for comparing weak interactions between aryl rings located on the external surfaces of equilibrating homo- and heterodimeric capsules. Two identical self-complementary resorcin[4]arene tetrabenzoate molecules and one tetramethylammonium cation form in CDCl3 hydrogen-bonded homodimeric capsules whose exteriors are decorated with four tight pairs of weakly interacting aryl rings. The pair wise mixing of six different homodimers establishes their equilibria with the corresponding heterodimeric species in which two types of aryl rings exert on each other some gentle forces. This equilibrium is significantly shifted either towards homo- or heterodimers depending on the nature and location of the substituents in the weakly interacting aryl rings. The thermodynamic favorability or disadvantage of the heterodimerization is determined by stronger or weaker aryl-aryl attractions in the hetero- or homodimeric capsules, respectively. The four-fold amplification of weak aryl-aryl interactions on the external surfaces of the equilibrating capsules is responsible for high sensitiveness of our approach.
RESUMEN
The chemical space of chiral Brønsted acid catalysts is defined by quantity and complexity, reflecting the diverse synthetic challenges confronted and the innovative molecular designs introduced. Here, we detail how this successful outcome is a powerful demonstration of the benefits of utilizing both local structure searches and a comprehensive understanding of catalyst performance for effective and efficient exploration of Brønsted acid properties. In this concept article we provide an evolutionary overview of this field by summarizing the approaches to catalyst optimization, the resulting structures, and functions.
RESUMEN
Atropisomers have attracted a great deal of attention lately due to their numerous applications in organic synthesis and to their employment in drug discovery. However, the synthetic arsenal at our disposal with which to access them remains limited. The research described herein is two-pronged; we both demonstrate the use of MCR chemistry as a synthetic strategy for the de novo synthesis of a class of atropisomers having high barriers to rotation with the simultaneous insertion of multiple chiral elements and we study these unprecedented molecular systems by employing a combination of crystallography, NMR and DFT calculations. By fully exploiting the synthetic capabilities of our chemistry, we have been able to monitor a range of different types of interaction, i.e. π-π, CH-π, heteroatom-π and CD-π, in order to conduct structure-property studies. The results could be applied both to atroposelective synthesis and in drug discovery.
RESUMEN
A yet-outstanding supramolecular chemistry challenge is isolation of novel varieties of stacked complexes with finely-tuned donor-acceptor bonding and optoelectronic properties, as herein reported for binary adducts comprising two different cyclic trinuclear complexes (CTC@CTC'). Most previous attempts focused only on 1-2 factors among metal/ligand/substituent combinations, resulting in heterobimetallic complexes. Instead, here we show that, when all 3 factors are carefully considered, a broadened variety of CTC@CTC' stacked pairs with intuitively-enhanced intertrimer coordinate-covalent bonding strength and ligand-ligand/metal-ligand dispersion are attained (dM-M' 2.868(2) Å; ΔE>50â kcal/mol, an order of magnitude higher than aurophilic/metallophilic interactions). Significantly, CTC@CTC' pairs remain intact/strongly-bound even in solution (Keq 4.67×105â L/mol via NMR/UV-vis titrations), and the gas phase (mass spectrometry revealing molecular peaks for the entire CTC@CTC' units in sublimed samples), rather than simple co-crystal formation. Photo-/electro-luminescence studies unravel metal-centered phosphorescence useful for novel all metal-organic light-emitting diodes (MOLEDs) optoelectronic device concepts. This work manifests systematic design of supramolecular bonding and multi-faceted spectral properties of pure metal-organic macrometallacyclic donor/acceptor (inorganic/inorganic) stacks with remarkably-rich optoelectronic properties akin to well-established organic/organic and organic/inorganic analogues.
RESUMEN
We have quantum chemically investigated the origin of the atypical blueshift of the H-C bond stretching frequency in the hydrogen-bonded complex X- â¢â¢â¢H3 C-Y (X, Y=F, Cl, Br, I), as compared to the corresponding redshift occurring in Cl- â¢â¢â¢H3 N and Cl- â¢â¢â¢H3 C-H, using relativistic density functional theory (DFT) at ZORA-BLYP-D3(BJ)/QZ4P. Previously, this blueshift was attributed, among others, to the contraction of the H-C bonds as the H3 C moiety becomes less pyramidal. Herein, we provide quantitative evidence that, instead, the blueshift arises from a direct and strong X- â¢â¢â¢C interaction of the HOMO of A- with the backside lobe on carbon of the low-lying C-Y antibonding σ* LUMO of the H3 C-Y fragment. This X- â¢â¢â¢C bond, in essence a tetrel bond, pushes the H atoms towards a shorter H-C distance and makes the H3 C moiety more planar. The blueshift may, therefore, serve as a diagnostic for tetrel bonding.
RESUMEN
Heavy metals are toxic, but it is impossible to stop using them. Considering the variety of molecular systems in which they can be present, the multicomponent nature and disorder of the structure of such systems, one of the most effective methods for studying them is NMR spectroscopy. This determines the need to calculate NMR chemical shifts for expected model systems. For elements beyond the third row of the periodic table, corrections for relativistic effects are necessary when calculating NMR parameters. Such corrections may be necessary even for light atoms due to the shielding effect of a neighboring heavy atom. This work examines the extent to which non-relativistic DFT calculations are able to reproduce experimental 15N and 113Cdâ NMR chemical shift tensors in pyridine-metal coordination complexes. It is shown that while for the calculation of 15Nâ NMR chemical shift tensors there is no real need to consider relativistic corrections, for 113Cd, on the contrary, none of the tested calculation methods could reproduce the experimentally obtained tensor to any extent correctly.
RESUMEN
The cooperative mechanism is of paramount importance in the synthesis of supramolecular polymers with desired characteristics, including molecular mass, polydispersity, and morphology. It is primarily driven by the presence of intermolecular interactions, which encompass strong hydrogen bonding, metal-ligand interactions, and dipole-dipole interactions. In this study, we utilize density functional theory and energy decomposition analysis to investigate the cooperative behavior of perylene diimide (PDI) oligomers with alkyl chains at their imide positions, which lack the previously mentioned interactions. Our systematic examination reveals that dispersion interactions originating from the alkyl side-chain substituents play an important role in promoting cooperativity within these PDIs. This influence becomes even more pronounced for alkyl chain lengths beyond hexyl groups. The energy decomposition analysis reveals that the delicate balance between dispersion energy and Pauli repulsion energy is the key driver of cooperative behavior in PDIs. Additionally, we have developed a mathematical model capable of predicting the saturated binding energies for PDI oligomers of varying sizes and alkyl chain lengths. Overall, our findings emphasize the previously undervalued significance of dispersion forces in cooperative supramolecular polymerization, enhancing our overall understanding of the cooperative mechanism.
RESUMEN
Various aza-crowns with different sizes and substituents have been explored computationally as potential hosts for stabilizing the explosive guest xenon trioxide (XeO3) through σ-hole-mediated aerogen bonding interactions. Interestingly, aza-crowns demonstrate superior binding towards XeO3 compared to their oxygen and thio counterparts. However, unlike the latter cases, where the binding was found to be increasingly favorable with the increase in the size of the crowns, aza-crowns exhibit a variable size preference for XeO3, peaking with aza-15-crown-5, and reducing thereafter with increase in crown size.
RESUMEN
The influence of the hydroxymethyl (CH2OH) group on the tetrahydrofuran (THF) ring structure was investigated by disentangling the gas phase conformational landscape of the sugar analogue tetrahydrofurfuryl alcohol (THFA). By combining rotational spectroscopy (6-20â GHz) and quantum chemical calculations, transitions corresponding to two stable conformers of THFA and their 13C isotopologues were observed and assigned in the rotational spectrum. The positions of the C atoms were precisely determined to unambiguously distinguish between nearly isoenergetic pairs of conformers that differ in their ring configurations: envelope (E) versus twist (T). The rotational spectrum confirms that the E ring geometry is favoured when the CH2OH fragment lies gauche (-) to the THF backbone (OCCO ~-60°) whereas the T form is more stable for the gauche (+) alignment of the substituent (OCCO ~+60°). The observed spectral intensities suggest that conformational relaxation of the THF geometry (EâT) to the more stable form readily occurs within the pairs of g- and g+ conformers which is consistent with the low barriers (1.5-1.7â kJ mol-1) for conversion determined via transition state calculations. Insights into the intramolecular hydrogen bonding and other weak interactions stabilizing the lowest energy structures of THFA were derived and rationalized using non-covalent interaction analyses.
RESUMEN
Noncovalent interactions are the basis for a large number of chemical and biological molecular-recognition processes, such as those occurring in supramolecular chemistry, catalysis, solid-state reactions in mechanochemistry, protein folding, protein-nucleic acid binding, and biomolecular phase separation processes. In this perspective article, some recent developments in probing noncovalent interactions by proton-detected solid-state Nuclear Magnetic Resonance (NMR) spectroscopy at Magic-Angle Spinning (MAS) frequencies of 100â kHz and more are reviewed. The development of MAS rotors with decreasing outer diameters, combined with the development of superconducting magnets operating at high static magnetic-field strengths up to 28.2â T (1200â MHz proton Larmor frequency) improves resolution and sensitivity in proton-detected solid-state NMR, which is the fundamental requirement for shedding light on noncovalent interactions in solids. The examples reported in this article range from protein-nucleic acid binding in large ATP-fueled motor proteins to a hydrogen-π interaction in a calixarene-lanthanide complex.
RESUMEN
Theoretical challenges in describing molecules with anomalously long single C-C bonds are analyzed in terms of the relative contributions of stabilizing and destabilizing intramolecular interactions. Diamondoid dimers that are stable despite the presence of C-C bonds up to 1.7â Å long, as well as other bulky molecules stabilized due to intramolecular noncovalent interactions (London dispersions) are discussed. The unexpected stability of highly crowded molecules, such as diamondoid dimers and tert-butyl-substituted hexaphenylethanes, calls for reconsideration of the "steric effect" traditionally thought to destabilize the molecule. Alternatively, "steric attraction" helps to understand bonding in sterically overloaded molecules, whose structural and energetic analysis requires a proper theoretical description of noncovalent interactions.