Polyoxometalate-dependent Photocatalytic Activity of Radical-doped Perylenediimide-based Hybrid Materials.

Inorganic-organic hybrid materials are a kind of multiduty materials with high crystallinity and definite structures, built from functional inorganic and organic components with highly tunable photochemical properties. Perylenediimides (PDIs) are a kind of strong visible light-absorbing organic dyes with π-electron-deficient planes and photochemical properties depending on their micro-environment, which provides a platform for designing tunable and efficient hybrid photocatalytic materials. Herein, four radical-doped PDI-based crystalline hybrid materials, Cl4-PDI⋅SiW12O40 (1), Cl4-PDI⋅SiMo12O40 (2), Cl4-PDI⋅PW12O40 (3), and Cl4-PDI⋅PMo12O40 (4), were attained by slow diffusion of polyoxometalates (POMs) into acidified Cl4-PDI solutions. The obtained PDI-based crystalline hybrid materials not only exhibited prominent photochromism, but also possessed reactive organic radicals under ambient conditions. Furthermore, all hybrid materials could be easily photoreduced to their radical anions (Cl4-PDI⋅-), and then underwent a second photoexcitation to form energetic excited state radical anions (Cl4-PDI⋅-*). However, experiments and theoretical calculations demonstrated that the formed energetic Cl4-PDI⋅-* showed unusual POM-dependent photocatalytic efficiencies toward the oxidative coupling of amines and the iodoperfluoroalkylation of alkenes; higher photocatalytic efficiencies were found for hybrid materials 1 (anion: SiW12O40 4-) and 2 (anion: SiMo12O40 4-) compared to 3 (anion: PW12O40 3-) and 4 (anion: PMo12O40 3-). The photocatalytic efficiencies of these hybrid materials are mainly controlled by the energy differences between the SOMO-2 level of Cl4-PDI⋅-* and the LUMO level of the POMs. The structure-photocatalytic activity relationships established in present work provide new research directions to both the photocatalysis and hybrid material fields, and will promote the integration of these areas to explore new materials with interesting properties.

Surface termination modulation for superior S-Scheme Bi2WO6/BiOI heterojunction photocatalyst: a hybrid density functional study.

The prevailing theoretical frameworks indicate that depending on the growth conditions, the Bi2WO6(001) surface can manifest in three distinct terminations-DL-O-Bi (DL: double layers), O-Bi, and O-W. In this study, we conduct a comprehensive examination of the interplay between these terminations on Bi2WO6(001) and the 1I-terminated BiOI(001) facet, especially focusing on their impact on the photocatalytic activity of Bi2WO6/BiOI heterostructure, applying hybrid functional calculations. The models formulated for this research are designated as Bi2WO6(O-Bi)/BiOI(1I), Bi2WO6(DL-O-Bi)/BiOI(1I), and Bi2WO6(O-W)/BiOI(1I). Our findings reveal that Bi2WO6(O-Bi)/BiOI(1I) shows a type II band alignment, which facilitates the spatial separation of photo-generated electrons and holes. Notably, the Bi2WO6(DL-O-Bi)/BiOI(1I) configuration has the lowest binding energy and results in an S-scheme (or Step-scheme) heterostructure. In contrast to the type II heterostructure, this particular configuration demonstrates enhanced photocatalytic efficiency due to improved photo-generated carrier separation, augmented oxidation capability, and better visible-light absorption. Conversely, Bi2WO6(O-W)/BiOI(1I) presents a type I projected band structure, which is less conducive for the separation of photo-generated electron-hole pairs. In summation, this investigation points out that one could significantly refine the photocatalytic efficacy of not only Bi2WO6/BiOI but also other heterostructure photocatalysts by modulating the coupling of different terminations via precise crystal synthesis or growth conditions.

Plasmonic effect of metal nanoparticles on the photocatalytic properties of TiO2/rGO composite.

A comparative study of the plasmon effect of Ag and Au nanoparticles on TiO2/rGO nanocomposite was carried out. The synthesis of Au and Ag nanoparticles was carried out by laser ablation. The morphology and structure of the nanocomposites were studied by EDA, HRTEM, XRD and Raman spectroscopy. It was shown that the absorption capacity of the nanocomposite material was increased in the visible range of the spectrum when Ag and Au nanoparticles were added to TiO2/rGO. This leads to an increase in their photocatalytic activity. The photocurrent generated by NC/Au 10-11films is in 3.8 times and NC/Ag 10-12is in 2 times higher compared to pure TiO2/rGO film. Similar results were obtained from experimental data on the dyes photodegradation. In the presence of plasmon nanoparticles a significant enhancement in the electrical properties of the TiO2/rGO nanocomposite was recorded. The charge carrier transfer resistance in nanocomposites was decreased by almost ∼7 times for NC/Au,10-11and ∼4 times for NC/Ag,10-12films compared to pure TiO2/rGO. In addition, for nanocomposites with Ag or Au nanoparticles, a decrease in the effective electron lifetime was observed. The data obtained allow us to conclude that plasmonic NPs have a synergistic effect in TiO2/rGO nanocomposites, which consists in modifying both their light-harvesting properties and charge-transport characteristics. The results obtained can be used for the design of materials with improved photocatalytic and optoelectronic characteristics.

Optoelectronic and photocatalytic behaviour of a type-II GaAlS2/HfS2heterostructure:ab initiostudy.

Theoretical examination based on first principle computation has been conducted for van der Waals heterostructure (vdwHS) GaAlS2/HfS2including structural, optoelectronic and photocatalytic characteristics. From the adhesion energy calculation, the AB configuration of GaAlS2/HfS2vdwHS is the most stable. A type-II GaAlS2/HfS2vdwHS is a dynamically and thermally stable structure. The band edge position, projected band, and projected charge densities verify the type-II alignment of GaAlS2/HfS2vdwHS. For GaAlS2/HfS2, GaAlS2is acting as a donor and HfS2is acting as an acceptor ensured by the charge density difference plot. The electron localized function validates the weak van der Waals interaction between GaAlS2and HfS2. The GaAlS2/HfS2vdwHS possess an indirect bandgap of 1.54 eV with notable absorption in the visible range. The findings assure that the GaAlS2/HfS2vdwHS is an efficient photocatalyst for pH 4-8. The band alignment of GaAlS2/HfS2is suitable for Z-scheme charge transfer. The strain influenced band edge suggests that the GaAlS2/HfS2vdwHS remains photocatalytic for strain-4%to+6%in both cases of uniaxial and biaxial strains.

Phytosynthesis of zinc oxide nanoparticles for enhanced antioxidant, antibacterial, and photocatalytic properties: A greener approach to environmental sustainability.

Multifunctional nanoparticles (NPs) production from phytochemicals is a sustainable process and an eco-friendly method, and this technique has a variety of uses. To accomplish this, we developed zinc oxide nanoparticles (ZnONPs) using the medicinal plant Tinospora cordifolia (TC). Instruments such as UV-Vis, XRD, FTIR, FE-SEM with EDX, and high-resolution TEM were applied to characterize the biosynthesized TC-ZnONPs. According to the UV-vis spectra, the synthesized TC-ZnONPs absorb at a wavelength centered at 374 nm, which corresponds to a 3.2 eV band gap. HRTEM was used to observe the morphology of the particle surface and the actual size of the nanostructures. TC-ZnONPs mostly exhibit the shapes of rectangles and triangles with a median size of 21 nm. The XRD data of the synthesized ZnONPs exhibited a number of peaks in the 2θ range, implying their crystalline nature. TC-ZnONPs proved remarkable free radical scavenging capacity on DPPH (2,2-Diphenyl-1-picrylhydrazyl), ABTS (2,2-azino-bis-3-ethylbenzothiazoline-6-sulfonic acid), and NO (Nitric Oxide). TC-ZnONPs exhibited dynamic anti-bacterial activity through the formation of inhibition zones against Pseudomonas aeruginosa (18 ± 1.5 mm), Escherichia coli (18 ± 1.0 mm), Bacillus cereus (19 ± 0.5 mm), and Staphylococcus aureus (13 ± 1.1 mm). Additionally, when exposed to sunlight, TC-ZnONPs show excellent photocatalytic ability towards the degradation of methylene blue (MB) dye. These findings suggest that TC-ZnONPs are potential antioxidant, antibacterial, and photocatalytic agents.

Papaya peel extract-mediated green synthesis of zinc oxide nanoparticles and determination of their antioxidant, antibacterial, and photocatalytic properties.

This study describes an effective and eco-friendly approach to the synthesis of zinc oxide nanoparticles (ZnONPs) utilizing papaya fruit peel extract (PPE). The structural evaluation and morphological features of synthesized ZnONPs were examined using various physicochemical analyses. The formulated ZnONPs were spherical to hexagonal in shape with ⁓ 170 nm in diameter. ZnONPs exhibited improved antioxidant potential in terms of DPPH radical scavenging activity (IC50 = 98.74 µg/ml) and ferric-reducing potential compared with PPE. The antibacterial activity of ZnONPs was measured against pathogenic strains of Salmonella typhi, Bacillus subtilis, Staphylococcus aureus, and Escherichia coli. The biosynthesized ZnONPs showed potential antibacterial efficacy against all microbes. In addition, ZnONPs exhibited potential photocatalytic activity in rhodamine B degradation in the presence of sunlight. The results indicated that papaya peels, which are these fruit wastes, could be helpful for the green synthesis of ZnONPs with good dose-responsive antioxidant, antibacterial, and photocatalytic activities.

The Fabrication and Property Characterization of a Ho2YSbO7/Bi2MoO6 Heterojunction Photocatalyst and the Application of the Photodegradation of Diuron under Visible Light Irradiation.

A novel photocatalytic nanomaterial, Ho2YSbO7, was successfully synthesized for the first time using the solvothermal synthesis technique. In addition, a Ho2YSbO7/Bi2MoO6 heterojunction photocatalyst (HBHP) was prepared via the hydrothermal fabrication technique. Extensive characterizations of the synthesized samples were conducted using various instruments, such as an X-ray diffractometer, a Fourier transform infrared spectrometer, a Raman spectrometer, a UV-visible spectrophotometer, an X-ray photoelectron spectrometer, and a transmission electron microscope, as well as X-ray energy dispersive spectroscopy, photoluminescence spectroscopy, a photocurrent test, electrochemical impedance spectroscopy, ultraviolet photoelectron spectroscopy, and electron paramagnetic resonance. The photocatalytic activity of the HBHP was evaluated for the degradation of diuron (DRN) and the mineralization of total organic carbon (TOC) under visible light exposure for 152 min. Remarkable removal efficiencies were achieved, with 99.78% for DRN and 97.19% for TOC. Comparative analysis demonstrated that the HBHP exhibited markedly higher removal efficiencies for DRN compared to Ho2YSbO7, Bi2MoO6, or N-doped TiO2 photocatalyst, with removal efficiencies 1.13 times, 1.21 times, or 2.95 times higher, respectively. Similarly, the HBHP demonstrated significantly higher removal efficiencies for TOC compared to Ho2YSbO7, Bi2MoO6, or N-doped TiO2 photocatalyst, with removal efficiencies 1.17 times, 1.25 times, or 3.39 times higher, respectively. Furthermore, the HBHP demonstrated excellent stability and reusability. The mechanisms which could enhance the photocatalytic activity remarkably and the involvement of the major active species were comprehensively discussed, with superoxide radicals identified as the primary active species, followed by hydroxyl radicals and holes. The results of this study contribute to the advancement of efficient heterostructural materials and offer valuable insights into the development of sustainable remediation strategies for addressing DRN contamination.

Plant-Assisted Green Synthesis of MgO Nanoparticles as a Sustainable Material for Bone Regeneration: Spectroscopic Properties.

This work is devoted to magnesium oxide (MgO) nanoparticles (NPs) for their use as additives for bone implants. Extracts from four different widely used plants, including Aloe vera, Echeveria elegans, Sansevieria trifasciata, and Sedum morganianum, were evaluated for their ability to facilitate the "green synthesis" of MgO nanoparticles. The thermal stability and decomposition behavior of the MgONPs were analyzed by thermogravimetric analysis (TGA). Structure characterization was performed by X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDS), ultraviolet-visible spectroscopy (UV-Vis), dynamic light scattering (DLS), and Raman scattering spectroscopy (RS). Morphology was studied by scanning electron microscopy (SEM). The photocatalytic activity of MgO nanoparticles was investigated based on the degradation of methyl orange (MeO) using UV-Vis spectroscopy. Surface-enhanced Raman scattering spectroscopy (SERS) was used to monitor the adsorption of L-phenylalanine (L-Phe) on the surface of MgONPs. The calculated enhancement factor (EF) is up to 102 orders of magnitude for MgO. This is the first work showing the SERS spectra of a chemical compound immobilized on the surface of MgO nanoparticles.

Constructing Direct Z-Scheme Y2TmSbO7/GdYBiNbO7 Heterojunction Photocatalyst with Enhanced Photocatalytic Degradation of Acetochlor under Visible Light Irradiation.

This study presents a pioneering synthesis of a direct Z-scheme Y2TmSbO7/GdYBiNbO7 heterojunction photocatalyst (YGHP) using an ultrasound-assisted hydrothermal synthesis technique. Additionally, novel photocatalytic nanomaterials, namely Y2TmSbO7 and GdYBiNbO7, were fabricated via the hydrothermal fabrication technique. A comprehensive range of characterization techniques, including X-ray diffractometry, Fourier-transform infrared spectroscopy, Raman spectroscopy, UV-visible spectrophotometry, X-ray photoelectron spectroscopy, transmission electron microscopy, X-ray energy-dispersive spectroscopy, fluorescence spectroscopy, photocurrent testing, electrochemical impedance spectroscopy, ultraviolet photoelectron spectroscopy, and electron paramagnetic resonance, was employed to thoroughly investigate the morphological features, composition, chemical, optical, and photoelectric properties of the fabricated samples. The photocatalytic performance of YGHP was assessed in the degradation of the pesticide acetochlor (AC) and the mineralization of total organic carbon (TOC) under visible light exposure, demonstrating eximious removal efficiencies. Specifically, AC and TOC exhibited removal rates of 99.75% and 97.90%, respectively. Comparative analysis revealed that YGHP showcased significantly higher removal efficiencies for AC compared to the Y2TmSbO7, GdYBiNbO7, or N-doped TiO2 photocatalyst, with removal rates being 1.12 times, 1.21 times, or 3.07 times higher, respectively. Similarly, YGHP demonstrated substantially higher removal efficiencies for TOC than the aforementioned photocatalysts, with removal rates 1.15 times, 1.28 times, or 3.51 times higher, respectively. These improvements could be attributed to the Z-scheme charge transfer configuration, which preserved the preferable redox capacities of Y2TmSbO7 and GdYBiNbO7. Furthermore, the stability and durability of YGHP were confirmed, affirming its potential for practical applications. Trapping experiments and electron spin resonance analyses identified active species generated by YGHP, namely •OH, •O2-, and h+, allowing for comprehensive analysis of the degradation mechanisms and pathways of AC. Overall, this investigation advances the development of efficient Z-scheme heterostructural materials and provides valuable insights into formulating sustainable remediation strategies for combatting AC contamination.

Te4+ and Er3+ doped ZrO2 nanoparticles with enhanced photocatalytic, antibacterial activity and dielectric properties: A next generation of multifunctional material.

Amid rising water contamination from industrial sources, tackling toxic dyes and pathogens is critical. Photocatalysis offers a cost-effective and eco-friendly solution to this pressing challenges. Herein, we synthesized Te4+ and Er3+ doped ZrO2 photocatalysts through hydrothermal method and investigated their efficacy in degrading Congo red (CR) and pathogens under visible light. XRD and Raman Spectroscopy confirm monoclinic and tetragonal mixed-phases without any impurities. Doping-induced defects, reduced crystalline diameter, high surface area, modified bandgap (2.95 eV), photoluminescence quenching, coupled with interfacial polarization, contribute to EZO's excellent dielectric response (1.149 × 106), for achieving remarkable photocatalytic activity, verified by photoelectrochemical measurements, LC-MS and phytotoxicity analysis. Under optimal conditions, EZO achieves 99% CR degradation within 100 min (TOC 79.9%), surpassing ZO (77%) and TZO (84%). Catalyst dosages, dye concentrations, and solution pH effect on EZO's photocatalytic performance are systematically assessed. Scavenging experiment emphasized the pivotal role of · OH in CR degradation with 96.4% efficiency after 4 cycles, affirming its remarkable stability. Moreover, EZO demonstrates ROS-mediated antibacterial activity against E. faecalis and E. coli bacteria under visible light, achieving >97% and >94% inhibition rate with an inhibition zone > 3 mm. Hence, the nanoparticle's dual action offers a practical solution for treating contaminated wastewater, ensuring safe irrigation.

A Comparative Study of Cerium(III) and Cerium(IV) Phosphates for Sunscreens.

Crystalline cerium(III) phosphate (CePO4), cerium(IV) phosphates, and nanocrystalline ceria are considered to be promising components of sunscreen cosmetics. This paper reports on a study in which, for the first time, a quantitative comparative analysis was performed of the UV-shielding properties of CePO4, Ce(PO4)(HPO4)0.5(H2O)0.5, and CePO4/CeO2 composites. Both the sun protection factor and protection factor against UV-A radiation of the materials were determined. Ce(PO4)(HPO4)0.5(H2O)0.5 was shown to have a sun protection factor of 2.9, which is comparable with that of nanocrystalline ceria and three times higher than the sun protection factor of CePO4. Composites containing both cerium dioxide and CePO4 demonstrated higher sun protection factors (up to 1.8) than individual CePO4. When compared with the TiO2 Aeroxide P25 reference sample, cerium(III) and cerium(IV) phosphates demonstrated negligible photocatalytic activity. A cytotoxicity analysis performed using two mammalian cell lines, hMSc and NCTC L929, showed that CePO4, Ce(PO4)(HPO4)0.5(H2O)0.5, and nanocrystalline ceria were all non-toxic. The results of this comparative study indicate that cerium(IV) phosphate Ce(PO4)(HPO4)0.5(H2O)0.5 is more advantageous for use in sunscreens than either cerium(III) phosphate or CePO4/CeO2 composites, due to its improved UV-shielding properties and low photocatalytic activity.

Ligand-Assistant Iced Photocatalytic Reduction to Synthesize Atomically Dispersed Cu Implanted Metal-Organic Frameworks for Photo-Enhanced Uranium Extraction from Seawater.

Uranium extraction from natural seawater is one of the most promising routes to address the shortage of uranium resources. By combination of ligand complexation and photocatalytic reduction, porous framework-based photocatalysts have been widely applied to uranium enrichment. However, their practical applicability is limited by poor photocatalytic activity and low adsorption capacity. Herein, atomically dispersed Cu implanted UiO-66-NH2 (Cu SA@UiO-66-NH2 ) photocatalysts are prepared via ligand-assistant iced photocatalytic reduction route. N-Cu-N moiety acts as an effective electron acceptor to potentially facilitate charge transfer kinetics. By contrast, there exist Cu sub-nanometer clusters by the typical liquid phase photoreduction, resulting in a relatively low photocatalytic activity. Cu SA@UiO-66-NH2 adsorbents exhibit superior antibacterial ability and improved photoreduction conversion of the adsorbed U(VI) to insoluble U(IV), leading to a high uranium sorption capacity of 9.16 mg-U/g-Ads from natural seawater. This study provides new insight for enhancing uranium uptake by designing SA-mediated MOF photocatalysts.

Physical properties and photocatalytic activity of Cr-doped TiO2 nanoparticles.

Nanocrystalline Ti1- x Crx O2 (0 ≤ x ≤ 0.20) samples were synthesised via acid-modified sol-gel process and characterised with various techniques, such as HRTEM, FESEM, Raman, XPS, DTA and VSM. The TEM image of TiO2 exhibits elongated nanoparticles with an average size of 10 nm. The HRTEM in combination with selected area electron diffraction (SAED) reveals the interplanar spacing and polycrystalline nature of the samples, respectively. FESEM micrographs divulge nonuniform morphologies and less aggregation of the particles in the doped sample. Raman spectra ensure the phase purity of the samples and a blue shift on Cr doping. X-ray photoelectron spectra (XPS) predict the chemical state of the elements and oxygen vacancies in the prepared samples. Room temperature magnetic measurements exhibit a significant variation in the magnetic parameters on Cr doping in TiO2 . The differential thermal analysis (DTA) shows the structural phase transition at ∼630°C. The photocatalytic performance is studied for the degradation of methylene blue (MB) dye under visible light irradiation. A higher photocatalytic efficiency is found for the 20% of Cr-doped TiO2 . These studies propose that the appropriate incorporation of Cr ions makes TiO2 very efficient for visible light-driven photocatalysts required for applications in wastewater treatment. LAY DESCRIPTION: In the present study, nanoparticles of TiO2 and Cr-doped TiO2 have been synthesised by a cost-effective acid-modified sol-gel process. The effect of Cr doping on the microstructure, thermal, magnetic and photocatalytic properties of TiO2 were explored in detail. The transmission electron microscopy (TEM) images exhibit the presence of elongated nanoparticles with an average size of 10 nm. Field emission scanning electron microscopy (FESEM) was used to study the surface morphology of the synthesised materials, which revealed nonuniform morphologies and less aggregation of the particles in the Cr-doped sample. Energy dispersive x-ray spectroscopy (EDS) confirms the elemental compositions with the appropriate stoichiometry of the elements. Raman spectra ensure the phase purity of the materials and also a blue shift with the incorporation of Cr ions in TiO2 . X-ray photoelectron spectra (XPS) predict the chemical state of the elements and oxygen vacancies in the prepared samples. The magnetic nature of all the synthesised samples was examined through the vibrating sample magnetometer (VSM) and revealed weak ferromagnetic behaviour of the samples. These results signify that the oxygen vacancies and defects play a crucial role in developing the ferromagnetic nature of oxide semiconductors. The differential thermal analysis (DTA) shows the structural phase transition at ∼630°C. The photocatalytic performance of the prepared samples was studied for the degradation of methylene blue (MB) dye under irradiation of visible light. A higher photocatalytic efficiency was found for the 20% of Cr-doped TiO2 . These studies propose that the appropriate incorporation of Cr ions makes TiO2 very efficient for visible light-driven photocatalysts required for applications in wastewater treatment.

A novel route to estimate the photocatalytic activity of titanium dioxide via voltage measurements.

Titanium dioxide is known as a photocatalyst, that may be activated by UV-A light and thus be able to lead to chemical reactions, to mineralize organic compounds, to inactivate biomolecules and to kill microorganisms, respectively. To estimate the capability of the photocatalytic activity a novel experimental setup using photovoltage measurements was studied. A distinct correlation between the photocatalytic activity of the titanium dioxide samples and the measurable photovoltages could be demonstrated. The experimental setups included the construction of different electrochemical cells based on TiO2 and using different liquid and gel electrolytes. The investigations were carried out on titanium dioxide layers as well as on TiO2 particle materials. The electrochemical measurement of the resulting voltage was optimised and the results were compared with conventionally used methods for the determination of the photocatalytic activity like the decolourization of methylene blue solutions. Additionally, the increase of carbon dioxide concentration in the gas phase was taken as a measure for total mineralization. Results indicate strong correlations between the different methods.

Boosting photocatalytic performances of lamellar BiVO4by constructing S-scheme heterojunctions with AgBr for efficient charge transfer.

Successful construction of heterojunction can improve the utilization efficiency of solar light by broadening the absorption range, facilitating charge-carrier separation, promoting carrier transportation and influencing surface-interface reaction. Herein, visible-light-driven AgBr was deposited on the surface of lamellar BiVO4which was prepared by a facile hydrothermal process to improve charge carrier separation, and subsequent photocatalytic effectiveness. The catalyst with an optimal AgBr/BiVO4ratio exhibited a superbly enhanced photocatalytic decolorization ability (about 6.85 times higher than that of pure BiVO4) and high stability after four cycles. The unique photocatalytic mechanism of S-scheme carrier migration was investigated on the bases of radical trapping tests and photo/electrochemical characterizations. Results showed that the enhanced migration strategy and intimately interfacial collaboration guaranteed the effective charge carriers separation/transfer, leading to magnificent photocatalytic performance as well as excellent stability.

Novel smart fiber/metal/chitosan composite as a filter for self-detoxifying photocatalytic wastewater remediation and biomedical applications.

Wastewater treatment remains the most significant delinquent issue world-wide. Generally, wastewater treatment involves filtration followed by acidified de-emulsification through photocatalytic reduction. The aim of the present study is to reduce the use of nanoparticles in wastewater treatment and also to find an appropriate alternative to replace cotton fiber filters used in water treatment plant. The cotton fiber filters are highly prone to bacterial film development leading to bactericidal degradation of the fibers. We developed a ZnO-chitosan nanocomposite coated fiber for wastewater treatment to enhance its photocatalytic activity under acidic condition. The fiber showed high degree of photocatalytic degradation activity, reducing rhodamine B dye, chemical oxygen demand and chromium levels in the synthetic wastewater to 37, 79 and 51% respectively under highly acidic condition. Additionally, ZnO-chitosan nanocomposite did not cause mortality on Danio rerio embryo after 72 h incubation. The ZnO-chitosan nanocomposite coated fiber showed strong antibacterial activity against Escherichia coli and Staphylococcus aureus with a reduction of 96% and 99% respectively. This study demonstrated the potential of a novel smart fiber in wastewater treatment and biomedical applications.

Development of luminescence carbon quantum dots for metal ions detection and photocatalytic degradation of organic dyes from aqueous media.

In the present study, fish scale waste was used for the organic synthesis of luminescence CQDs by the hydrothermal method. The impact of CQDs on improved photocatalytic degradation of organic dyes and metal ions detection is examined in this study. The synthesized CQDs had a variety of characteristics that were detected, such as crystallinity, morphology, functional groups, and binding energies. The luminescence CQDs showed outstanding photocatalytic effectiveness for the destruction of methylene blue (96.5%) and reactive red 120 dye (97.8%), respectively after 120 min exposure to visible light (420 nm). The high electron transport properties of the CQDs edges, which make it possible to efficiently separate electron-hole pairs, are attributed to the enhanced photocatalytic activity of the CQDs. These degradation results prove that the CQDs are the outcome of a synergistic interaction between visible light (adsorption); a potential mechanism is also suggested, and the kinetics is analyzed to use a pseudo-first-order model. Additionally, the metal ions detection of CQDs was studied by various metal ions (Hg2+, Fe2+, Cu2+, Ni2+, and Cd2+) in an aqueous solution and results revealed that the PL intensity of CQDs in presence of cadmium ions decreased. Studies show that the organic fabrication of CQDs are effective photocatalyst and may one day serve as the ideal material to reduce water pollution.

An emerging expanse: Novel and eco-friendly-biogenic synthesis of E. cardamomum-wrapped TiO2 nanoparticles for environmental and biological applications.

The present research is targeted at E. cardamomum-derived TiO2-photocatalyst synthesis, reporting for the first time. The structural properties observed from the XRD pattern reveal that EC:TiO2 has an anatase phase and crystallite size is assessed by Debye-Scherrer's method (3.56 nm), WH-method (3.30 nm), and Modified-Debye-Scherrer's method (3.27 nm). An optical study by the UV-Vis spectrum shows strong absorption at 313 nm, and the corresponding band gap value is 3.28 eV. The topographical and morphological properties revealed by SEM and HRTEM images, elucidate the formation of multi-shaped particles of nano-size. Further, the phytochemicals on the EC:TiO2 NPs' surface are confirmed by the FTIR spectrum. The photocatalytic activity is well studied under UV light towards Congo Red dye, along with an effect of the dose of catalyst. EC:TiO2 (20 mg) has exhibited high photocatalytic efficiency up to 97% for 150 min of exposure due to the morphological, structural, and optical properties. CR degradation reaction exhibits pseudo-first-order kinetics, displaying a rate constant value of 0.01320 min-1. Reusability investigations reveal that after four photocatalysis cycles, EC:TiO2 has an effective efficiency of >85%. Additionally, EC:TiO2 NPs have been assessed for antibacterial activity and show potential against two bacterial species (S. aureus and P. aeruginosa). Therefore, these research outcomes from the eco-friendly and low-cost synthesis, are promising for the use of EC:TiO2 as a talented photocatalyst towards the removal of crystal violet dye as well as an antibacterial agent against bacterial pathogens.

A new formulation of Ni/Zn bi-metallic nanocomposite and evaluation of its applications for pollution removal, photocatalytic, electrochemical sensing, and anti-breast cancer.

Nanocomposites have gained attention due to their variety of applications in different fields. In this research, we have reported a green synthesis of a bi-metallic nanocomposite of nickel and zinc using an aqueous extract of Citrus sinensis in the presence of chitosan (Ni/Zn@orange/chitosan). The nanocomposite was characterized using different techniques. We have examined various applications for Ni/Zn@orange/chitosan. The NPs were manufactured in spherical morphology with a particle range size of 17.34-90.51 nm. Ni/Zn@orange/chitosan showed an acceptable ability to remove dyes of Congo red and methyl orange from an aqueous solution after 80 min furthermore, it uptaking the drug mefenamic acid from a solution. Ni/Zn@orange/chitosan also exhibited great photocatalytic activity in synthesizing benzimidazole using benzyl alcohol and o-phenylenediamine. Ni/Zn@orange/chitosan was found as a potent electrochemical sensor to determine glucose. In the molecular and cellular section of the current research, the cells with composite nanoparticles were studied by MTT way about the anti-breast adenocarcinoma potentials malignant cell lines. The IC50 of composite nanoparticles were 320, 460, 328, 500, 325, 379, 350, and 396 µg/mL concering RBA, NMU, SK-BR-3, CAMA-1, MCF7, AU565, MDA-MB-468, and Hs 281.T breast adenocarcinoma cell lines, respectively. The results revealed the newly synthesized nanocomposite is a potent photocatalyst, dye pollution removal agent, and an acceptable new drug to treat breast cancer.

Facile preparation of porphyrin@g-C3N4/Ag nanocomposite for improved photocatalytic degradation of organic dyes in aqueous solution.

In the quest of improving the photocatalytic efficiency of photocatalysts, the combination of two and more semiconductors recently has garnered significant attention among scientists in the field. The doping of conductive metals is also an effective pathway to improve photocatalytic performance by avoiding electron/hole pair recombination and enhancing photon energy absorption. This work presented a design and fabrication of porphyrin@g-C3N4/Ag nanocomposite using acid-base neutralization-induced self-assembly approach from monomeric porphyrin and g-C3N4/Ag material. g-C3N4/Ag material was synthesized by a green reductant of Cleistocalyx operculatus leaf extract. Electron scanning microscopy (SEM), X-ray diffraction (XRD), FT-IR spectroscopy, and UV-vis spectrometer were utilized to analyse the properties of the prepared materials. The prepared porphyrin@g-C3N4/Ag nanocomposite showed well integration of porphyrin nanostructures on the g-C3N4/Ag's surface, in which porphyrin nanofiber was of the diameter in nanoscales and the length of several micrometers, and Ag NPs had an average particle size of less than 20 nm. The photocatalytic behavior of the resultant nanocomposite was tested for the degradation of Rhodamine B dye, which exhibited a remarkable RhB photodegrading percentage. The possible mechanism for photocatalysis of the porphyrin@g-C3N4/Ag nanocomposite toward Rhodamine B dye was also proposed and discussed.