The impact of anatomic alignment on radiocapitellar pressure following radial head arthroplasty.

BACKGROUND: The incidence of radial head fractures is increasing, and radial head arthroplasty (RHA) is being more frequently used as treatment for irreparable fractures. Our objective was to compare radiocapitellar pressure between the native joint and 2 radial head prosthesis conditions: (1) a prosthetic head that was aligned to the forearm axis of rotation and (2) the same prosthesis with an axisymmetric nonaligned head. METHODS: Ten cadaveric specimens received a pressfit radial head prosthesis (Align; Skeletal Dynamics) for both prosthetic testing conditions. Anatomic alignment (AL) was defined as the prosthetic head aligned to the forearm axis of rotation. Axisymmetric alignment (AX) was defined as the prosthetic radial head aligned to the axis of the prosthetic stem. Axial load was applied with the elbow in extension and the forearm pronated. Data were collected using a Tekscan 4000 sensor. RESULTS: The mean pressure in the AL and AX groups were significantly higher than the mean pressure in the native joint. Compared with the native joint, the mean pressure was 19% higher in the AL group and 56% higher in the AX group. Peak pressure beyond 5 MPa occurred in 0 specimens in the native joint group, in 1 specimen (10%) in the AL group, and in 5 specimens (50%) in the AX group. DISCUSSION: Our results demonstrated that a pressfit radial head prosthesis aligned with the forearm axis of rotation yields capitellar pressures that were more similar to the native condition than a nonaligned pressfit prosthesis. These findings suggest that anatomic alignment may optimize capitellar wear properties, improving the long-term durability of radial head arthroplasty.

Stress shielding following radial head arthroplasty: the impact of preoperative bone quality.

BACKGROUND: We sought to assess if the medullary diameter to cortical width ratio (MD:CW), canal flair index (CFI), and canal fill (CF) of the proximal radius were associated with the presence of stress shielding (SS) after a MoPyC radial head arthroplasty. MATERIALS AND METHODS: We conducted a retrospective, international, multicenter (4 centers) study. A total of 100 radial head arthroplasties in 64 women and 36 men with a mean age of 58.40 years ± 14.90 (range, 25.00-91.00) were included. Radiographic measurements, including MD:CW, CFI, CF, and postoperative SS were captured at a mean follow-up of 3.9 years ± 2.8 (range, 0.5-11). RESULTS: SS was identified in 60 patients. Mean preoperative MD:CW, CFI, and CF were 0.55 ± 0.09, 1.05 ± 0.18, and 0.79 ± 0.11, respectively. The presence of SS was significantly associated with MD:CW (adjusted odds ratio = 13.66; P = .001), and expansion of the stem (adjusted odds ratio = 3.78; P = .001). The amount of the SS was significantly correlated with expansion of the stem (aß 4.58; P < .001). CONCLUSIONS: Our study found that MD:CW was an independent risk factor of SS after MoPyc radial head arthroplasty. Autoexpansion of the MoPyc stem significantly increased the risk of SS and its extent. Further studies involving multiple implants designs are needed to confirm the preliminary observations presented in the current study.

Look for the POLESTAR (POsteroLateral Engagement of Soft Tissue And Radial head) while navigating around elbow dislocation.

BACKGROUND: Elbow dislocation is frequently associated with bony and osteochondral posterolateral capitellar lesions that are often under-reported. We aim to examine the radiologic signs of posterolateral lesions on computed tomography (CT). METHODS: A retrospective analysis of CT scans was performed. Patients were classified into 4 groups: (1) simple elbow dislocation, (2) elbow dislocation with a fracture of the coronoid tip, (3) elbow dislocation with coronoid tip fracture and a radial head fracture inferior or equal to the anterior third, and (4) terrible triad defined as elbow dislocation with concomitant coronoid and radial head fracture with a more important involvement. Patients with a more complex fracture pattern were excluded. The presence of POsteroLateral Engagement of Soft Tissue And Radial head (POLESTAR) patterns was analyzed and subclassified as impaction type or fragmentation type. RESULTS: Fifty-one CT scans met the inclusion criteria. POLESTAR lesions were identified in 48 cases (94%): 46% impaction-type and 54% fragmentation-type POLESTAR. Analyzing patients from grade 1 to 4, impaction-type POLESTAR was found, respectively, from 40% to 57%, whereas fragmentation type was present from 60% to 43%. CONCLUSIONS: This study shows a high incidence of POLESTAR lesions (94%) that can be present as impaction type or fragmentation type. Based on our preliminary results, impaction type is more common in grades 3 and 4, whereas fragmentation type is more frequent in grades 1 and 2.

Long Title: Short to Midterm Outcomes of 139 Pyrocarbon Monopolar Radial Arthroplasties.

INTRODUCTION: The MoPyc radial head arthroplasty (RHA) is a monopolar implant with a pyrocarbon head that obtains rigid fixation via controlled expansion of the titanium stem. The aim of this study was to evaluate the short to midterm outcomes of MoPyc RHA. MATERIALS AND METHODS: Between 2002 and 2021, 139 MoPyc RHA were implanted in 139 patients with a RH fracture. The mean follow-up was 5.9 years ±3.5 (range 1-16). Range of motion, mean Mayo Elbow Performance score (MEPS), quick disabilities of the Arm, Shoulder and Hand (quickDASH) score, visual analog scale (VAS), radiographic outcome, and reason for failure were recorded. RESULTS: The mean MEP, QuickDASH, and VAS scores were 89.1± 2.2(range, 45-100), 17.5±16.7(range, 0-78), and 0.8±1.6(range, 0-50), respectively. Stress shielding (SS) and osteolysis around the stem (OAS) were identified in 92(66%) and 20(14%) patients. A total of 47(29%) patients experienced at least one complication; and 29(21%) of them required re-intervention. Persistent stiffness (n=12;9%) was the most common complication. No painful loosening was noted. Osteolysis around the stem, presence of an autoexpanding stem, and overstuffing were associated with a lower MEPS and an increase in VAS (p<0.05). Stress shielding (SS) was associated with an increase in MEPS (aß=6.92; p<0.001) and lower VAS (aß=-0.69; p=0.016). The auto-expending stem increased the likelihood of SS after RHA (aOR=1.49; p=0.001). CONCLUSIONS: A well-fixed MoPyc RHA provided satisfactory short to midterm outcomes, without painful loosening. However, the autoexpanding stem system was associated with poorer functional outcomes and increased the likelihood of SS.

Added transverse screw in tripod construct increases stiffness in Mason III radial head fractures: a finite element analysis.

BACKGROUND: The tripod screw configuration has been shown to offer similar stiffness characteristics to a laterally placed plate. However, concern has been raised that the construct may be prone to failure in scenarios where the screw intersects at the fracture line. We performed a finite element analysis to assess potentially ideal and unideal screw placements in the tripod construct among Mason III radial head fractures. METHODS: A 3-dimensional proximal radius model was developed using a computed tomography scan of an adult male radius. The fracture site was simulated with a uniform gap in transverse and sagittal planes creating a Mason type III fracture pattern comprising 3 fragments. Three configurations were modeled with varying screw intersection points in relation to the radial neck fracture line. A fourth configuration comprising an added transverse interfragmentary screw was also modeled. Loading scenarios included axial and shear forces to simulate physiological conditions. Von Mises stress and displacement were used as outcomes for analysis. RESULTS: Some variation can be seen among the tripod configurations, with a marginal tendency for reduced implant stress and greater stiffness when screw intersection is further from the neck fracture region. The construct with an added transverse interfragmentary screw demonstrated greater stiffness (2269 N/mm) than an equivalent tripod construct comprising 3 screws (612 N/mm). CONCLUSION: The results from this study demonstrate biomechanical similarity between tripod screw constructs including where screws intersect at the radial neck fracture line. An added fourth screw, positioned transversely across fragments, increased construct stiffness in our model.

Radiographic and clinical comparisons between loose-fit and press-fit stems in monopolar radial head arthroplasty for comminuted radial head fractures.

PURPOSE: Few clinical studies have compared the operative outcomes between loose- and press-fit stems in radial head arthroplasty (RHA). We aimed to evaluate the radiographic and clinical results of the two radial head implant concepts. METHODS: In this retrospective multicenter study, 32 patients (24 women and 8 men) with a mean age of 63.1 years who underwent RHA for comminuted radial head fractures were reviewed between 2005 and 2021. Seventeen patients underwent RHA with a loose-fit stem (L-group), whereas the remaining fifteen patients underwent RHA with a press-fit stem (P-group). The mean follow-up period was 40.1 ± 9.9 months, with the minimum follow-up duration of 12 months. The radiographic findings were evaluated for periprosthetic osteolysis; furthermore, clinical outcomes were analyzed to measure the range of motion of the elbow. The rate of reoperations and prosthesis removal were also reviewed. RESULTS: The general characteristics of the patients were similar in the two groups. The rate of periprosthetic osteolysis was 17.6% in the L-group, whereas it was 53.3% in the P-group. The mean elbow flexions were 128° and 133° in the L- and P-groups, respectively. The mean elbow extensions were -12° and -9° in the L- and P-groups, respectively. The rate of reoperation was 23.5% in the L-group and 15.2% in the P-group. One patient in the L-group had the prosthesis removed because of surgical site infection, whereas one patient in the P-group had the prosthesis removed owing to painful loosening. CONCLUSIONS: No significant differences in the clinical outcomes and reoperation rate were observed between the two radial head implant concepts in this study. However, osteolysis occurred more frequently in the P-group. Although patients with periprosthetic osteolysis are currently asymptomatic, they should be carefully followed up for the symptoms in the long term.

Microstructure of the radial head: Insights into anatomical variations and implications for advanced interventions.

Appropriate management of radial head fractures is integral to prevent long-term consequences like chronic pain and loss of motion. Advanced imaging systems, like micro-computed tomography (µCT), are valuable for understanding radial head fracture patterns as they utilize micrometer scale resolution to define important parameters of bone health like cortical density and trabecular thickness. The purpose of this study was to identify and describe the structural morphology of the radial head utilizing µCT. Nine fresh-frozen cadaveric human radii were divided into four equal quadrants, based, and labeled as posteromedial, posterolateral, anteromedial, and anterolateral. Quadrants were scanned with a SCANCO MicroCT40 with both cortical and cancellous bone density measurements at a resolution of 36.0 µm. Bone density, direct trabecular number, and trabecular thickness were recorded as milligrams of hydroxyapatite/cm3. A one-way repeated measures ANOVA was performed to compare the bone densities, trabecular number, and trabecular thickness of each of the four quadrants (p < 0.05). The posteromedial quadrant contained substantially more bone than other quadrants. Significantly greater bone densities were found in the posteromedial quadrant (148.1 mg of HA/cm3) compared to the anteromedial quadrant (54.6 mg of HA/cm3), posterolateral quadrant (137.5 mg of HA/cm3) compared to the anteromedial quadrant (54.6 mg of HA/cm3), and posterolateral quadrant (137.5 mg of HA/cm3) compared to the anterolateral quadrant (58.1 mg of HA/cm3). The trabecular number was not significantly different between quadrants. Trabecular thickness was significantly lower in the anterolateral (0.1417 mg of HA/cm3) and anteromedial (0.1416 mg of HA/cm3) quadrants compared to the posteromedial (0.1809 mg of HA/cm3) quadrant. The posterior half of the radial head was found to have a higher density of columns and arches compared to the anterior half. The microstructure of trabecular bone in the distal radius forms columns, struts, and arches, which allow for efficient transmission of stress through the bone. The microstructure of the radial head has similar microarchitecture to the distal radius with the present study identifying the presence of columns and arches in the radial head. These structures, along with trabecular density, in the posterior radial head may explain the lower incidence of fractures involving the posterior half of the radial head. Furthermore, our study supports the idea that the high incidence of fractures involving the anterolateral quadrant is due to microarchitecture characteristics and the relative lack of supportive structures compared to other areas. The novel insight gained from this study will aid in the development of advanced interventions for preventative measures and better treatment of radial head fractures like more satisfactory purchase when screws are directed towards the denser posteromedial quadrant.

Anterior radial head subluxation in primary elbow osteoarthritis.

PURPOSE: To investigate elbows with primary osteoarthritis (OA) for the presence of anterior radial head subluxation. METHODS: A total of 71 patients with elbow osteoarthritis and 45 with lateral epicondylitis were initially identified. The baseline characteristics and preoperative elbow X-rays of consecutive patients that had been clinically confirmed with elbow OA or lateral epicondylitis between March 2011 and January 2020 were then retrospectively reviewed. The radiocapitellar ratio (RCR; the ratio of the displacement of the radial head about the diameter of the capitulum) was calculated using lateral views. These RCR values were compared between the OA and lateral epicondylitis cases. RESULT: A significant increase was detected in RCR values between patients in elbow OA and the control group (13.2% (± 10.6) vs -1.2% (± 6.8), P<0.001). Based on receiver operating characteristic curves, RCR values had an excellent area under the curve (0.89) for the detection of elbow OA (Youden index, 0.69; sensitivity, 89%; specificity, 80%). Based on the ROC curve, the cutoff value of RCR was 0.04. Patients with RCR ≥ 0.04 had a significantly higher proportion of cases with elbow OA (risk ratio, 31.50 [95% CI, 11.17-88.82]) than those with RCR ˂ 0.04 (P ˂ 0.001). CONCLUSION: Radial head subluxation is a radiographic finding associated with elbow OA and RCR ≥ 0.04 could be used as an aetiological factor for elbow OA diagnosis.

Usefulness of multiple bioabsorbable Mg screws/K­wires for comminuted radial head fractures.

PURPOSE: We hypothesized that multiple absorbable screws/K-wires would be effective for native head preservation in comminuted radial head fracture fixation (com-RHFs). METHODS: Seventeen patients who met the inclusion criteria between 2018 and 2020 were included. Radiologic findings indicating proper union and clinical outcomes such as the range of elbow motion, visual analog scale score, and Mayo Elbow Performance Score were assessed prospectively after surgery and at least three years of follow-up. RESULTS: The mean follow-up period was 4.6 years. Eleven, one, three, and two patients presented with isolated com-RHFs, type 2 (accompanied injury of medial collateral ligament), type 4 ("terrible triad") fractures, and type 5 posterior olecranon fracture-dislocations, respectively. Union was achieved after a mean of nine weeks postoperatively. The head and shaft angles did not differ significantly from the contralateral normal values (p = 0.778 and 0.872, coronal and sagittal, respectively). At the final follow-up, the mean flexion-extension/pronation-supination arcs were 126.47 ± 4.92°/135.59 ± 10.13°, and thus were significantly different from those on the contralateral side (p < 0.001, both), however the arcs were functional ranges for ordinary daily life. Also, functional status was satisfactory in all individuals. The arthritis grade and extent of heterotrophic ossification were satisfactory in all cases, and there were no serious complications requiring revision surgery. CONCLUSIONS: Absorbable screw/K-wire fixation for com-RHFs is an option before radial head arthroplasty associated with a low complication rate and no need for revision.

Intraoperative visualization of the posterolateral ulnohumeral joint space is reliable to indicate overlengthening in radial head arthroplasty.

INTRODUCTION: Avoiding overlengthening in radial head arthroplasty (RHA) is essential for the prognosis of the elbow joint. An overlengthening from 2 mm is visible due to widening of the anterolateral ulnohumeral joint space but intraoperatively, this particular joint space is difficult to visualize. The commonly used Kocher approach allows visualization of the posterolateral joint space without additional instruments or further surgical release of the already unstable elbow. The aim of our study was to investigate whether the visualization of the posterolateral joint space is also a reliable method to indicate overlengthening in RHA. MATERIAL AND METHODS: RHA was performed in five human cadaveric specimens with the forearm, wrist, and hand intact. The lateral ligament complex was detached and an anatomic transosseous refixation was performed. Six stages of implantation heights were documented: native joint (1), RHA at the anatomic height (2), + 2 mm (3), + 4 mm (4), + 6 mm (5) and - 2 mm (6). Macroscopic measurement and digital image analysis of the posterolateral and anterolateral ulnohumeral joint spaces were performed. RESULTS: All stages of overlengthening showed a significant increase in posterolateral and anterolateral joint space widening (p < 0.05). The posterior and anterior joint space showed excellent intraclass correlation. CONCLUSION: Visualization of the posterolateral aspect of the ulnohumeral joint space is a reliable indicator for overlengthening in RHA without further compromising an already unstable elbow. Correlation to the findings of the anterolateral ulnohumeral joint space in different implants leads to the assumption that visualization of either the anterior or posterior ulnohumeral joint space is universally applicable to determine overlengthening in RHA, regardless of the type of the radial head implant.

Long-terms outcomes of radial head arthroplasty using a bipolar prosthesis.

BACKGROUND: In acute treatment of radial head fractures, a radial head prosthesis can be considered if open reduction and internal fixation are not technically feasible. METHODS: We reviewed the data of 27 consecutive bipolar Judet radial head prostheses implanted in patients with unreconstructable radial head fractures and no other concomitant fractures (coronoid or olecranon factures). The lesions of the lateral collateral ligament were rated according to the McKee classification. Twenty-three patients with more than ten-year follow-up participated in this retrospective study All patients underwent assessments for pain, range of motion and stability using the Mayo Elbow Performance Score, the QuickDash questionnaire and a Visual Analogue Scale for pain. Radiography assessment was performed to determine the correct setting of the implant, presence of periprosthetic loosening, prosthetic disassembly, heterotopic ossification, capitellum and ulnohumeral degenerative changes. RESULTS: Mean follow-up was 149 months (± 12.2). Mean range of motion in flexion-extension was 111° (± 10.55), mean extension was 18° (± 14.32) and mean flexion was 130° (± 11.4). Mean arc of motion in supination-pronation was 150° (± 12.26). The mean Mayo Elbow Performance Score was 88, the mean QuickDash score was 7.3; 86% of the patients were satisfied. Seven patients (26%) required secondary surgery. The most frequent complication was heterotopic ossification, which had negative consequences on the functional result. CONCLUSIONS: Bipolar radial head prostheses are an option for acute treatment of isolated unreconstructable radial head fractures. During follow-up, three patients required implant revision and removal; the capitellum surface presented severe degenerative changes and the prosthesis was not replaced. Another complication was the risk of implant dislocation, in relation to implant design, incorrect positioning of the radial head stem or else to inadequate reconstruction of the lateral collateral ligament. Further work is needed to establish the long-term follow-up results of Judet implants in complex elbow fractures.

Early range of motion results in good elbow function following conservative treatment of non-displaced radial head fractures.

INTRODUCTION: The aim of this study was to evaluate the range of motion (ROM), elbow function and predictors for good elbow function after conservative treatment of non-displaced radial head fractures. MATERIAL AND METHODS: All patients with non-displaced radial head fractures (displacement < 2 mm), that were diagnosed between January 1st 2017 and December 31st 2021 in a level I trauma center, were included in this retrospective case series and the charts were evaluated for ROM and elbow function. Elbow function was categorized as "good" or "bad" depending on the ROM measured defined by Morrey et al. Overall, 73 patients (33 male, 40 female) with an average age of 38 years (+/- 13 years) could be included. RESULTS: Conservative treatment had good clinical results for ROM and elbow function. After 6 weeks mean flexion was 131° (SD 13°), extension 8° (SD 7°), Pronation 83° (SD 11°) and Supination 83° (SD 13). Patients with a good elbow function after one week showed a good elbow function after completing the treatment. CONCLUSIONS: A clinical assessment after one week should always be performed and the study showed that it is a good predictor for good elbow function. In cases of bad elbow function further controls should be considered.

Proximal radial neck fracture with complete 180-degree rotation of radial head: A case report.

Radial neck fractures with radial head rotation are very rare and extremely difficult to manage. We present the case of an 11-year-old girl who fell on her outstretched left upper extremity and damaged her left elbow in a road traffic accident. An arthrotomy was performed under a C-Arm fluoroscope, which confirmed the radial head displacement of 180° along with the fracture. The fracture site was reduced and fixed with two Kirschner wires, cutting the wire short at its distal end for a complete closure. Open reduction and internal fixation were followed by casting for five weeks. After two years of follow-up, she had complete pain free range of motion of the affected limb. No post-operative complications have been observed till date. Open reduction and internal fixation with two Kwires is a viable option for such complex injuries. However, further evaluation of outcomes and post-operative complications are required.

Open reduction and internal fixation of modified Mason type III/IV radial head fractures with more than three fragments: an analysis of the clinical outcome and reoperation rate.

PURPOSE: It is generally accepted that a radial head fracture (RHF) with more than three parts is not suitable for repair; therefore, most authors suggest straightforward radial head arthroplasty (RHA). With up to 20% risk for reoperation after RHA, improvement in reduction and fixation techniques may represent a valuable alternative before further extending the indications for arthroplasty. To determine the functional results and radiological failure rate after osteosynthesis of multi-fragmentary RHF with more than three articular fragments. We specifically determined (1) the one-year Broberg and Morrey functional elbow score, (2) duration of fracture healing, (3) complication rate, and (4) number of patients converted to RHA. METHODS: This study is a retrospective single-center case series. All patients who underwent primary osteosynthesis for RHF between 2012 and 2019 were included. Nine patients with an average age of 52 years had an average clinical and/or radiological follow-up of 49 months. RESULTS: The preoperative imaging identified nine fractures with four fragments. Three patients underwent osteosynthesis with plates and screws, whereas six patients underwent osteosynthesis with only screws. The mean Broberg and Morrey score was 95 points. Overall, eight of the nine patients had satisfactory results. All patients retained their radial heads and showed radiological fracture healing. Only two patients presented with low-grade complications requiring no further surgery. CONCLUSION: Our study showed that osteosynthesis of RHF with up to four fragments can achieve good functional results with a low complication rate and seems to be a valid alternative to RHA.

The use of hinged elbow orthosis following surgical management of terrible triad injuries of the elbow.

PURPOSE: To determine outcomes following surgical management of terrible triad injuries in patients treated with and without a hinged elbow orthosis (HEO) in the post-operative setting. METHODS: This study was a retrospective review of 41 patients who underwent surgical treatment of terrible triad injuries including radial head fracture, coronoid fracture, and ulnohumeral dislocation between 2008 and 2023 with at least 10-week follow-up. RESULTS: Nineteen patients were treated post-operatively without HEO, and 22 patients were treated with HEO. There were no differences in range of motion (ROM) between patients treated with and without HEO in final flexion-extension arc (118.4° no HEO, 114.6° HEO, p = 0.59) or pronation-supination arc (147.8° no HEO, 141.4° HEO, p = 0.27). Five patients treated without HEO and one patient treated with HEO returned to the operating room for stiffness (26%, 5%, p = 0.08). QuickDASH scores were similar between groups (p = 0.69). CONCLUSIONS: This study found no difference in post-operative ROM, complications, or QuickDASH scores in patients treated post-operatively with or without HEO. Based on these results, we cannot determine whether the use of HEO adds additional stability to the elbow while initiating ROM exercises post-operatively.

All-star approach to a small medical imaging dataset: combined deep, transfer, and classical machine learning approaches for the determination of radial head fractures.

BACKGROUND: Radial head fractures are often evaluated in emergency departments and can easily be missed. Automated or semi-automated detection methods that help physicians may be valuable regarding the high miss rate. PURPOSE: To evaluate the accuracy of combined deep, transfer, and classical machine learning approaches on a small dataset for determination of radial head fractures. MATERIAL AND METHODS: A total of 48 patients with radial head fracture and 56 patients without fracture on elbow radiographs were retrospectively evaluated. The input images were obtained by cropping anteroposterior elbow radiographs around a center-point on the radial head. For fracture determination, an algorithm based on feature extraction using distinct prototypes of pretrained networks (VGG16, ResNet50, InceptionV3, MobileNetV2) representing four different approaches was developed. Reduction of feature space dimensions, feeding the most relevant features, and development of ensemble of classifiers were utilized. RESULTS: The algorithm with the best performance consisted of preprocessing the input, computation of global maximum and global mean outputs of four distinct pretrained networks, dimensionality reduction by applying univariate and ensemble feature selectors, and applying Support Vector Machines and Random Forest classifiers to the transformed and reduced dataset. A maximum accuracy of 90% with MobileNetV2 pretrained features was reached for fracture determination with a small sample size. CONCLUSION: Radial head fractures can be determined with a combined approach and limitations of the small sample size can be overcome by utilizing pretrained deep networks with classical machine learning methods.

Clinical study of suture anchors in the treatment of radial head fractures.

BACKGROUND: This study aimed to analyze and study the clinical effect of suture anchors in the treatment of radial head fractures (RHFs). METHODS: A total of 11 patients (five male and six female) with RHFs who were treated from March 2016 to June 2021 were included in this study. They were 17-61 (average 38.5) years old. In terms of the Johnston-Mason classification, two cases were type II, seven cases were type III, and two cases were type IV. All patients were treated with open reduction and anchor internal fixation. RESULTS: All 11 patients were followed up, all incisions healed by first intention, and the duration of follow-up was 14-20 months. The average operation time was 40 ± 15 min. The clinical healing time was 4-6 (average 5) weeks. No patients had any complications, such as traumatic arthritis, malunion, nerve injury, joint stiffness, or incision infection. The clinical effects were evaluated according to the Mayo Elbow Performance Score. The scores of all 11 cases were 90-95, all excellent. CONCLUSION: The application of suture anchor internal fixation in the treatment of RHFs has the advantages of accurate reduction, no need for a secondary operation to remove the fixation materials, less trauma, fewer complications, good fracture healing, and good recovery of elbow extension, flexion, and rotation functions.

Outcomes of radial head fractures treated with pre-curved metacarpal plate.

OBJECTIVE: To explore the clinical outcomes of MasonII/III radial head fractures without the neck involvement treated with pre-curved metacarpal plates. METHODS: Ninety cases of Mason typeII/III radial head fractures without the neck involvement were retrospectively collected from the department of orthopaedics of our hospital from September 2015 to May 2021. Group A (n = 44) underwent open reduction and internal fixation with pre-curved metacarpal plate, and Group B (n = 46) were fixed by traditional T-shaped plates. The operation time and the incision length were recorded during the operation. The Mayo Elbow Performance Score (MEPS), Disability of Arm, Shoulder and Hand (DASH) score, visual analogue scale (VAS) for pain, range of motion (ROM) and post-operative complications were evaluated at the last follow-up. RESULTS: All the patients were followed up for at least 12 months. There were no significant difference between two groups regarding operation time (54.2 ± 12.1 v.s 51.3 ± 7.2, mins), MEPS (88.9 ± 4.2 v.s 87.8 ± 4.4), DASH score (7.3 ± 4.6 v.s 9.0 ± 4.0), VAS (1.6 ± 0.8 v.s 1.7 ± 0.7), and ROM. However, the incision length was shorter in Group A (5.6 ± 0.5 v.s 6.6 ± 0.5, cm, P < 0.01). The postoperative complication rate was also lower in Group A (1/44 v.s 8/46, P = 0.02). CONCLUSION: Masson II/III radial head fractures without the neck involvement treated with pre-curved metacarpal plates could achieve satisfactory outcomes comparable to traditional T-shaped plates. Moreover, the invasiveness and postoperative complications are less in patients with pre-curved metacarpal plates. LEVEL OF EVIDENCE: III, retrospective comparison study.

Open Reduction Internal Fixation of Simple Versus Comminuted Radial Head Fractures: Comparison of Clinical Outcomes.

PURPOSE: Current teaching suggests that modified Mason type III and IV fractures of the radial head involving more than 3 fragments should be treated with radial head arthroplasty. The purpose of this study was to compare the outcome of simple (2 or fewer intra-articular pieces) versus comminuted (3 or more intra-articular pieces) radial head fractures treated with open reduction internal fixation (ORIF). METHODS: This was a retrospective review of 35 patients with modified Mason type III and IV fractures treated with ORIF. For the purpose of our study, simple fractures were defined as having 2 or fewer intra-articular fragments. Comminuted fractures were defined as having 3 or more intra-articular fragments. The primary outcomes were Broberg and Morrey rating system and Quick Disabilities of the Arm, Shoulder, and Hand (QuickDASH) scores. Reoperation rates and complications were also noted. RESULTS: Thirty-five patients were evaluated, with a mean follow-up of 39.3 months. Thirteen patients had radial head fractures consisting of 2 or fewer intra-articular fragments. Twenty-two patients had radial head fractures consisting of 3 or more intra-articular fragments. Ages and follow-up times were similar in the 2 groups. Similar QuickDASH and Broberg and Morrey scores were seen when evaluating subgroups of 2, 3, and 4 fragment fractures. One patient from each group underwent revision surgery for symptomatic hardware. CONCLUSIONS: In our series, we found similar clinical outcome scores and reoperation rates between simple and comminuted radial head fractures treated with ORIF. Fractures with more than 3 intra-articular fragments can be considered for ORIF. TYPE OF STUDY/LEVEL OF EVIDENCE: Therapeutic IV.

Radial Head Arthroplasty for Fracture: Implant Survivorship and Outcomes at Mean Follow-up of 8 Years.

PURPOSE: The purpose of this study was to evaluate implant survivorship and clinical outcomes following radial head arthroplasty for fracture at long-term follow-ups. METHODS: A retrospective analysis was conducted on adult patients who underwent primary uncemented radial head arthroplasty for radial head or neck fractures between 2012 and 2015. Medical records were reviewed to collect information regarding demographics, injury characteristics, reoperations, and revisions requiring implant removal. A bivariate analysis was conducted to identify potential risk factors for reoperation. A Kaplan-Meier curve was created to determine implant survival rates. Eligible patients were contacted to confirm any reoperations and obtain Quick Disability of the Arm, Shoulder, and Hand scores at long-term follow-ups. RESULTS: A total of 89 patients were eligible for analysis and assessed at a mean of 97 months after surgery (range, 81-128). Reoperation rate was 16% (14 of 89 patients), including 5% of patients requiring implant removal or revision. However, 93% of reoperations occurred within the first 12 months of the index surgery. Fracture dislocations of the elbow had a higher rate of reoperation. A Kaplan-Meier curve demonstrated an implant survival rate of 96% at 10-year follow-up. Of the patients who responded, the mean Quick Disability of the Arm, Shoulder, and Hand score was 8.7 ± 10.3, with none requiring additional reoperations or revisions. There were otherwise similar outcome scores among patients requiring reoperation versus those who did not. CONCLUSIONS: Although radial head arthroplasty for fractures has a high potential for reoperation within the first year, survival rates with uncemented implants remain high at 10 years, and patients report excellent Quick Disability of the Arm, Shoulder, and Hand scores at long-term follow-ups, despite any need for reoperation. Fractures with associated elbow dislocation may be at a higher risk for reoperation, and it is important to provide this prognostic information to patients who are likely to require arthroplasty for more extensive injuries. TYPE OF STUDY/LEVEL OF EVIDENCE: Therapeutic IV.