Estimation of age and sex from fingernail clippings by using ATR-FTIR spectroscopy coupled with chemometric interpretation.

Fingernails can act as important forensic evidence as they can be a source of DNA that may link the victim or accused to the crime scene and may also contain traces of drugs such as cocaine and heroin, in regular users. Moreover, previous studies have shown that analyzing fingernails with various techniques can reveal important information, such as age and sex. In this work, ATR-FTIR spectroscopy with chemometric tools has been used to estimate the age and sex from fingernails by analyzing 140 fingernail samples (70 males, and 70 females) collected from volunteers aged between 10 and 70 years old. The amide bands obtained from spectra confirmed the presence of keratin proteins in the samples. PCA and PLS-R were used for the classification of samples. For sex estimation, samples were divided into four categories based on age groups, followed by the differentiation of sex in each group. Similarly, for age estimation, all samples were divided into two sets based on male and female followed by differentiation of age groups in each set. The result showed that PLS-R was able to differentiate fingernail samples based on sex in groups G1, G2, G3, and G4 with R-square values of 0.972, 0.993, 0.991, and 0.996, respectively, and based on age in females, and males with R-square values of 0.93 and 0.97, respectively. External validation and blind tests were also performed which showed results with 100% accuracy. This approach has proved to be effective for the estimation of sex and age from fingernail samples.

A controlled method for the identification of forensic traces from clandestine grave fill.

Deceased human remains are often buried as a forensic countermeasure or method of disposal by homicide perpetrators. Owing to this, the excavation of clandestine grave sites is a task that forensic crime scene teams may only encounter a few times a year. Not all crime scene units have specialised teams for this task, and even those that do, may not have specific protocols for the optimal recovery of forensic traces retained within grave fill as procedures such as sieving require optimisation for the specific soil conditions of the jurisdiction. This study aimed to define the optimal sieving conditions for a sandy environment when searching for minute traces of paint, glass, hair and fibres. Furthermore, this study justifies the practice of retaining grave fill and examining it under controlled laboratory conditions, rather than in-situ adjacent to the grave site. The results demonstrate that using sieve mesh sizes as fine as 0.1 mm can recover up to 82% of the deposited traces and almost all paint, hair and glass traces. The processing of grave fill in the laboratory lead to increased yield of forensic evidence, which on a case-basis may warrant the increased time needed. These findings merit consideration for clandestine grave crime scenes where evidence is scarce or the case is likely to become cold.

Crystal clear connections - database matching unknown glass fragments to reference glass from ATM explosions.

This paper introduces the concept of an operational reference glass database, specifically designed for broken glass fragments from ATM attacks, jewelry store robberies, and ramraids on high-end clothing stores. The database, initiated in 2014, is used to compare glass traces from organized crews involved said criminal activities. Utilizing LA-ICPMS, this study establishes a methodology for collecting reference glass samples from the scenes of the aforementioned crimes, thus creating a comprehensive database containing over 3500 reference glass samples from crime scenes. The operational database is employed to match trace elemental profiles of glass fragments from suspected items to known reference samples, offering specificity and accuracy. Analysis of results, while ongoing due to the nature of active cases, find matches of trace materials in over 50 % of case requests since 2019. Challenges such as database scalability and continuous updating are acknowledged, and future directions include technological advancements to enhance precision and the application into other areas of forensic material analysis. The paper emphasizes the efficacy of this specialized approach in chemical profiling, providing a potent tool for linking glass traces to specific criminal contexts and providing intelligence and investigative leads into individuals involved in ATM-related crimes.

Evaluation of Storage Conditions and the Effect on DNA from Forensic Evidence Objects Retrieved from Lake Water.

DNA analysis of traces from commonly found objects like knives, smartphones, tapes and garbage bags related to crime in aquatic environments is challenging for forensic DNA laboratories. The amount of recovered DNA may be affected by the water environment, time in the water, method for recovery, transport and storage routines of the objects before the objects arrive in the laboratory. The present study evaluated the effect of four storage conditions on the DNA retrieved from bloodstains, touch DNA, fingerprints and hairs, initially deposited on knives, smartphones, packing tapes, duct tapes and garbage bags, and submerged in lake water for three time periods. After retrieval, the objects were stored either through air-drying at room temperature, freezing at -30 °C, in nitrogen gas or in lake water. The results showed that the submersion time strongly influenced the amount and degradation of DNA, especially after the longest submersion time (21 days). A significant variation was observed in success for STR profiling, while mtDNA profiling was less affected by the submersion time interval and storage conditions. This study illustrates that retrieval from water as soon as possible and immediate storage through air-drying or freezing before DNA analysis is beneficial for the outcome of DNA profiling in crime scene investigations.

Differentiating Nylon Samples with Visually Indistinguishable Fluorescence Using Principal Component Analysis and Common Dimension Partial Least Squares Linear Discriminant Analysis with Synchronous Fluorescence Spectroscopy.

Fluorescence spectroscopy is an attractive candidate for analyzing samples of nylon. Impurities within the polymers formed during the synthesis and processing of nylons give rise to the observed fluorescence, allowing for nylons to be analyzed based on their impurities. Nylons from the same source are expected to display similar fluorescence profiles, and nylons with different fluorescence are expected to be from different sources. This paper investigates an important case where different nylons displayed similar fluorescence, preventing easy discrimination. Samples of Nylon 6 and Nylon 6/12 had visually indistinguishable excitation-emission matrices (EEM), excitation spectra, fluorescence spectra, and synchronous fluorescence spectra at larger Δλ. By collecting synchronous fluorescence spectra at smaller Δλ, additional features in the fluorescence profiles were identified that allowed for some discrimination between the two nylons. Combining the EEM and synchronous fluorescence data with chemometric algorithms provided a clearer differentiation between the two nylons. parallel factor analysis, principal component analysis, and common dimension partial least squares (ComDim-PLS) showed two distinct clusters in the data, with ComDim-PLS providing the greatest distinction between the clusters. The loadings revealed the variables of interest to the ComDim-PLS were the 400 nm and 335 nm bands for all synchronous fluorescence spectra, the 460 nm and 310 nm bands for the Δλ = 20 nm and Δλ = 30 nm synchronous fluorescence spectra, and the 440 nm band for the Δλ = 20 nm synchronous fluorescence spectra. The linear discriminant analysis performed with the PLS data yielded a classification accuracy of 95% with the EEM data and 100% with the synchronous fluorescence data, displaying the power of this technique to differentiate two different nylons with visually indistinguishable fluorescence spectra.

Fibres in the nasal cavity: A pilot study of the recovery, background, and transfer in smothering scenarios.

In cases where the suspected cause of death is smothering, fibre traces recovered from the nasal cavity are hypothesised to refute or support this proposition. In order to carry out such evaluations, an efficient recovery method must first be established. This pilot study tested five different recovery methods on 3D printed models of nasal cavities. Among which, the use of the transparent AccuTrans® polyvinyl Siloxane casts demonstrated the best recovery efficiency with a median of 90% of deposited fibres recovered. The efficacy of this method was then verified on cadavers. Apart from a reliable recovery method, an understanding of the background population of fibres in nasal cavities, as well as the mechanisms of the transfer from the purported smothering textile to the nasal cavity is essential to evaluate the findings in these cases of suspected smothering. Samplings of the nasal cavities of 20 cadavers were thus carried out to gather data on the background population of fibres. Results showed that nasal cavities are not void of fibres, but the quantities are expected to be low, with a mean of 3.8 fibres per cavity recovered. Information on generic fibre class, colour, and length of these background fibres were also obtained with the use of low and high-power microscopy. The frequencies found in this population of fibres closely align with data from other population studies where black cotton was the most common. Finally, transfer experiments using the 3D printed models fitted with a respiratory pump to simulate breathing were carried out, along with testing on live volunteers in-vivo. The results demonstrated a verifiable transfer of fibres into the nasal cavity in smothering scenarios. Textiles of various shedding capacities were used in these tests and the findings suggest an influence of this variable on the quantities of fibres transferred.

Determining storage for pressure-sensitive tape evidence: A long-term study.

Tape is a type of trace evidence commonly seen in forensic science. Little to no research has been published regarding the optimal storage material for pressure-sensitive adhesive (PSA) tape. The purpose of this project was to determine the substrate with the least amount of interference for storing PSA tape. Interferences such as difficulty removing tape from the substrate or substrate components leaching into the adhesive can affect the analysis. This was a long-term study in which samples were stored on various substrates for nearly 10 years. Ten different tape samples were placed on eight different substrates for a total of 80 samples. The substrates included typical materials currently used for tape storage as well as other, less common materials. The tape samples were evaluated for ease of removal at various time intervals. The adhesives from each tape were analyzed at similar time intervals by Fourier transform infrared spectroscopy (FTIR). In addition, the adhesives were analyzed by pyrolysis gas chromatography-mass spectrometry (PyGC-MS), scanning electron microscopy with energy-dispersive spectroscopy (SEM-EDS), and x-ray fluorescence (XRF) at the last time interval (112 months) and compared to the adhesive tape samples from the original rolls of tape to determine if there was any adverse effect from the substrates during storage. The FedEx backing was the only substrate that had no adverse effects regarding ease of removal. The substrates that had the least effect on the adhesive for both short-term and long-term storage included FedEx backings, adhesive sheet backings, and polyester transparency sheets.

From frequented environments to the crime scene: Evaluating findings of fibre comparisons in complex transfer scenarios.

The evaluation of the results from a fibre comparison given activity level propositions is well established when considering only a single group of potential primary transfers. However, secondary transfers are less prevalent in the literature despite their potential value, especially in cases where the primary transfers are not sufficiently informative. In particular, one can consider the fibres from frequented environments of the person of interest (POI) identified in a struggle. If the POI did struggle with the complainant, these fibres can potentially be recovered in small quantities on the surface of the complainant as a result of secondary or higher order transfers. Therefore, these fibres may provide useful information that can resolve competing propositions involving struggles, as well as forensic intelligence in the form of linkages or investigative leads. If a non-differentiation is indeed found between recovered fibres and fibres from the frequented environments of the POI, these results need to be properly interpreted. In this paper, a model, based on an object oriented Bayesian network (OOBN), for evaluating such findings along with its implementation is proposed. Using available data from the literature and other sources, the model was then used to assess a few hypothetical scenarios involving secondary transfers. The results provided useful insights into secondary transfer that help to validate the model and demonstrate the potential utility that can be gained by considering transfers beyond the primary order. Moreover, these results can be used to help guide future research by identifying gaps in the literature. Finally, the direct application to a case study was conducted to demonstrate the practical aspects of such a model.

Calvin & Hobbes chase the murderer: Atypical solution to a case of trace evidence in a laboratory. Case report / Calvin y Hobbes cazan al asesino: solución atípica a un caso en un laboratorio de evidencia traza. Reporte de caso

This is the case of a typical request for a chemical laboratory analysis to conduct a comparison of materials or trace evidence with completely unexpected results from those obtained if established protocols had been followed. This request involved the collation of black gunpowder, a material which is generally associated with firearms. In this case, however, the prosecutor's request was to compare the powder from two groups of paper used in tejo (a popular Colombian sport) in order to ascertain the identity of a homicide suspect at the scene of the crime.

A continuación se presenta una solicitud típica (cotejo de materiales) para un laboratorio de química o de evidencia traza, la cual tuvo una solución completamente inesperada y cuyo resultado fue más contundente que el que se hubiese tenido de haberla abordado según los protocolos establecidos. Esta solicitud involucraba el cotejo de pólvora negra, material que generalmente llega a estos laboratorios involucrado en hechos relacionados con el accionar de armas de fuegos. En este caso, sin embargo, la petición de la Fiscalía consistía en cotejar la pólvora de dos grupos de papeletas de tejo con el fin de asociar al sospechoso de un asesinato con la escena del crimen.