Light and Guest Responsive Behavior in a Porous Coordination Network Enabled by Reversible [2+2] Photocycloaddition.

Stimuli-responsive physisorbents that undergo reversible structural transformations induced by external stimuli (e.g. light, guests, or heat) offer the promise of utility in gas storage and separation. Whereas reports on guest or light-responsive sorbents have increased in recent years, we are unaware of reports on sorbents that exhibit both light and guest-induced structural transformations. Herein, we report that the square lattice, sql, topology coordination network Zn(fba)(bis) ⋅ 2DMF (sql-5,6-Zn-α, 5=trans-4,4'-bis(1-imidazolyl)stilbene=bis, 6=2,2-bis(4-carboxyphenyl)hexafluoropropane=H2fba) underwent single-crystal-to-single-crystal transformation (SCSC) upon activation, affording nonporous sql-5,6-Zn-ß. Parallel alignment at 3.23 Šof olefinic moieties on adjacent bis ligands in sql-5,6-Zn-α enabled SCSC [2+2] photocycloaddition upon exposure to UV light (365 nm) or sunlight. sql-5,6-Zn-α thereby transformed to mot-5,6-Zn-α, which was subsequently activated to the narrow pore phase mot-5,6-Zn-ß. sql-5,6-Zn-ß and mot-5,6-Zn-ß both exhibited S-shaped adsorption isotherms characteristic of guest-induced structural changes when exposed to CO2 at 195 K (type-F-IV and type F-I, respectively). Cycling experiments conducted upon sql-5,6-Zn-ß reduced particle size after cycle 1 and induced transformation into a rare example of a shape memory coordination network, sql-5,6-Zn-γ. Insight into this smorgasbord of SCSC phase changes was gained from in situ PXRD, single crystal XRD and 1H NMR spectroscopy experiments.

Water as a Modifier in a Hybrid Coordination Network Glass.

Chemical diversification of hybrid organic-inorganic glasses remains limited, especially compared to traditional oxide glasses, for which property tuning is possible through addition of weakly bonded modifier cations. In this work, it is shown that water can depolymerize polyhedra with labile metal-ligand bonds in a cobalt-based coordination network, yielding a series of nonstoichiometric glasses. Calorimetric, spectroscopic, and simulation studies demonstrate that the added water molecules promote the breakage of network bonds and coordination number changes, leading to lower melting and glass transition temperatures. These structural changes modify the physical and chemical properties of the melt-quenched glass, with strong parallels to the "modifier" concept in oxides. It is shown that this approach also applies to other transition metal-based coordination networks, and it will thus enable diversification of hybrid glass chemistry, including nonstoichiometric glass compositions, tuning of properties, and a significant rise in the number of glass-forming hybrid systems by allowing them to melt before thermal decomposition.

Crystalline Metal-Peptide Networks: Structures, Applications, and Future Outlook.

Metal-peptide networks (MPNs), which are assembled from short peptides and metal ions, are considered one of the most fascinating metal-organic coordinated architectures because of their unique and complicated structures. Although MPNs have considerable potential for development into versatile materials, they have not been developed for practical applications because of several underlying limitations, such as designability, stability, and modifiability. In this review, we summarise several important milestones in the development of crystalline MPNs and thoroughly analyse their structural features, such as peptide sequence designs, coordination geometries, cross-linking types, and network topologies. In addition, potential applications such as gas adsorption, guest encapsulation, and chiral recognition are introduced. We believe that this review is a useful survey that can provide insights into the development of new MPNs with more sophisticated structures and novel functions.

Shape-Memory Effect Enabled by Ligand Substitution and CO2 Affinity in a Flexible SIFSIX Coordination Network.

We report that linker ligand substitution involving just one atom induces a shape-memory effect in a flexible coordination network. Specifically, whereas SIFSIX-23-Cu, [Cu(SiF6 )(L)2 ]n , (L=1,4-bis(1-imidazolyl)benzene, SiF6 2- =SIFSIX) has been previously reported to exhibit reversible switching between closed and open phases, the activated phase of SIFSIX-23-CuN , [Cu(SiF6 )(LN )2 ]n (LN =2,5-bis(1-imidazolyl)pyridine), transformed to a kinetically stable porous phase with strong affinity for CO2 . As-synthesized SIFSIX-23-CuN , α, transformed to less open, γ, and closed, ß, phases during activation. ß did not adsorb N2 (77 K), rather it reverted to α induced by CO2 at 195, 273 and 298 K. CO2 desorption resulted in α', a shape-memory phase which subsequently exhibited type-I isotherms for N2 (77 K) and CO2 as well as strong performance for separation of CO2 /N2 (15/85) at 298 K and 1 bar driven by strong binding (Qst =45-51 kJ/mol) and excellent CO2 /N2 selectivity (up to 700). Interestingly, α' reverted to ß after re-solvation/desolvation. Molecular simulations and density functional theory (DFT) calculations provide insight into the properties of SIFSIX-23-CuN .

The "Chemistree" of Porous Coordination Networks: Taxonomic Classification of Porous Solids to Guide Crystal Engineering Studies.

New approaches to gas/vapor storage and purification are urgently needed to address the large energy footprint, cost, and/or risk associated with existing technologies. In this context, new classes of porous physisorbents, exemplified by porous coordination networks (PCNs), have emerged. There are now >100 000 entries in the Cambridge Structural Database (CSD) metal-organic framework (MOF) subset and the rate of publication, >5000 per year, grows unabatedly. The number of PCNs makes it infeasible to test all of them for sorption performance and it is therefore timely to introduce a classification approach based upon taxonomy to supplement topological classification of PCNs. This taxonomic approach complements existing databases such as the CSD and enable the design (crystal engineering) of new families of PCNs. It also categorizes existing PCNs in a manner useful to crystal engineers. The internal consistency of the taxonomic approach is verified by case studies of several well-known PCNs whereas its utility is demonstrated upon understudied topologies and hard-to-rationalize infinite rod building blocks. Overall, taxonomic classification enables a traffic light system to direct crystal engineers towards finding a "needle in haystack," that is, a family (platform) of PCNs that is amenable to crystal engineering and systematic structure/property studies.

Integrated Photoresponsive Alkaline Earth Metal Coordination Networks: Synthesis, Topology, Photochromism and Photoluminescence Investigation.

Photoresponsive materials are a key part of the age of smart technology that have potential in a broad range of applications. Coordination networks (CNs) are widely used due to their designability and stability. In this work, three novel alkaline earth metal coordination networks (AEM-CNs): [Mg(CMNDI)(H2 O)2 ], [Ca(CMNDI)(H2 O)2 ]⋅H2 O, and [Sr(CMNDI)(H2 O)(DMF)] with fsl, cds, and scn topology nets were synthetized via N,N'-bis(carboxymethyl)-1,4,5,8-naphthalenediimide (H2 CMNDI); the scn net is not found in the Reticular Chemistry Structure Resource or ToposPro. The reusable and sensitive photochromic properties of the three CNs enable them to be used as secret inks or ultraviolet detectors. In addition, the CNs also exhibited reusable photoluminescent turn-off toward the drug molecules, balsalazide disodium (Bal.) and colchicine (Col.), with good limits of detection of 0.16 and 0.70 µM. To the best of our knowledge, this is the first study of a fluorescence sensor for Bal. Thus, the AEM-CNs provide a design idea for integrated photoresponsive materials that could be further improved in the near future by further study.

Uncovering the Hidden Landscape of Tris(4-pyridyl) Ligands: Topological Complexity Derived from the Bridgehead.

Supramolecular main group chemistry is a developing field which parallels the conventional domain of metallo-organic chemistry. Little explored building blocks in this area are main group metal-based ligands which have the appropriate donor symmetry to build desired molecular or extended arrangements. Tris(pyridyl) main group ligands (E(py)3 , E=main group metal) are potentially highly versatile building blocks since shifting the N-donor arms from the 2- to the 3-positions and 4-positions provides a very simple way of changing the ligand character from mononuclear/chelating to multidentate/metal-bridging. Here, the coordination behaviour of the first main group metal tris(4-pyridyl) ligands, E(4-py)3 (E=Sb, Bi, Ph-Sn) is explored, as well as their ability to build metal-organic frameworks (MOFs). The complicated topology of these MOFs shows a marked influence on the counter anion and on the ability of the E(4-py)3 ligands to switch coordination mode, depending on the steric and donor character of the bridgehead. This structure-directing influence of the bridgehead provides a potential building strategy for future molecular and MOF design in this area.

Structural Transformation of Surface-Confined Porphyrin Networks by Addition of Co Atoms.

The self-assembly of a nickel-porphyrin derivative (Ni-DPPyP) containing two pyridyl coordinating sites and two pentyl chains at trans meso positions was studied with scanning tunneling microscopy (STM), X-ray photoelectron spectroscopy (XPS) and low energy electron diffraction (LEED) on Au(111). Deposition of Ni-DPPyP onto Au(111) gave rise to a close-packed network for coverages smaller or equal to one monolayer as revealed by STM and LEED. The molecular arrangement of this two-dimensional network is stabilized via hydrogen bonds formed between the pyridyl's nitrogen and hydrogen atoms from the pyrrole groups of neighboring molecules. Subsequent deposition of cobalt atoms onto the close-packed network and post-deposition annealing at 423 K led to the formation of a Co-coordinated hexagonal porous network. As confirmed by XPS measurements, the porous network is stabilized by metal-ligand interactions between one cobalt atom and three pyridyl ligands, each pyridyl ligand coming from a different Ni-DPPyP molecule.

Three-Component Self-Assembly Changes its Course: A Leap from Simple Polymers to 3D†Networks of Spherical Host-Guest Assemblies.

One-pot self-assembly reactions of the polyphosphorus complex [Cp*Fe(η5 -P5 )] (A), a coinage metal salt AgSbF6 , and flexible aliphatic dinitriles NC(CH2 )x CN (x=1-10) yield 1D, 2D, and 3D coordination polymers. The seven-membered backbone of the dinitrile was experimentally found as the borderline for the self-assembly system furnishing products of different kinds. At x<7, various rather simple polymers are exclusively formed possessing either 0D or 1D Ag/A structural motifs connected by dinitrile spacers, while at x≥7, the self-assembly switches to unprecedented extraordinary 3D networks of nano-sized host-guest assemblies (SbF6 )@[(A)9 Ag11 ]11+ (x=7) or (A)@[(A)12 Ag12 ]12+ (x=8-10) linked by dinitriles. The polycationic nodes represent the first superspheres based on A and silver and are host-guest able. All products are characterized by NMR spectroscopy, mass spectrometry, and single-crystal X-ray diffraction. The assemblies [(A)12 Ag12 ]12+ were visualized by transmission electron microscopy.

Amino-Functionalised Hybrid Ultramicroporous Materials that Enable Single-Step Ethylene Purification from a Ternary Mixture.

Pyrazine-linked hybrid ultramicroporous (pore size <7 Å) materials (HUMs) offer benchmark performance for trace carbon capture thanks to strong selectivity for CO2 over small gas molecules, including light hydrocarbons. That the prototypal pyrazine-linked HUMs are amenable to crystal engineering has enabled second generation HUMs to supersede the performance of the parent HUM, SIFSIX-3-Zn, mainly through substitution of the metal and/or the inorganic pillar. Herein, we report that two isostructural aminopyrazine-linked HUMs, MFSIX-17-Ni (17=aminopyrazine; M=Si, Ti), which we had anticipated would offer even stronger affinity for CO2 than their pyrazine analogs, unexpectedly exhibit reduced CO2 affinity but enhanced C2 H2 affinity. MFSIX-17-Ni are consequently the first physisorbents that enable single-step production of polymer-grade ethylene (>99.95 % for SIFSIX-17-Ni) from a ternary equimolar mixture of ethylene, acetylene and CO2 thanks to coadsorption of the latter two gases. We attribute this performance to the very different binding sites in MFSIX-17-Ni versus SIFSIX-3-Zn.

Cation-Controlled Assembly of Polyoxotungstate-Based Coordination Networks.

The Preyssler polyoxoanion, [NaP5 W30 O110 ]14- ({P5 W30 }), is used as a platform for evaluating the role of nonbridging cations in the formation of transition-metal-bridged polyoxometalate (POM) coordination frameworks. Specifically, the assembly architecture of Co2+ -bridged frameworks is shown to be dependent on the identity and amount of alkali or alkaline-earth cations present during crystallization. The inclusion of Li+ , Na+ , K+ , Mg2+ , or Ca2+ in the framework synthesis is used to selectively synthesize five different Co2+ -bridged {P5 W30 } structures. The influence of the competition between K+ and Co2+ for binding to {P5 W30 } in dictating framework assembly is evaluated. The role of ion pairing on framework assembly structure and available void volume is discussed. Overall, these results provide insight into factors governing the ability to achieve controlled assembly of POM-based coordination networks.

Sliding Polymeric Layers and Anion Displacement Coupled with Spin Crossover in Two-Dimensional Networks of [Fe(hbtz)2 (CH3 CN)2 ](BF4 )2.

The abrupt high spin (HS)→low spin (LS) transition (T↓ 1/2 =136 K) in [Fe(hbtz)2 (CH3 CN)2 ](BF4 )2 (hbtz=1,6-di(tetrazol-2-yl)hexane) is finished at 100 K and further thermal treatment influences the spin crossover. Subsequent heating involves a change of the spin state in the same way (T↑ 1/2 =136 K) on cooling. In contrast, cooling below 100 K triggers different behavior and T↑ 1/2 is shifted to 170 K. The extraordinary structural changes that occurred below 100 K are responsible for the observed diversity of properties. A unique feature of the low-temperature phase is the rebuilding of the anion network expressed by a shift of anions inside the polymeric layer at a distance of 1.2 Šas well as the relative shift of neighboring layers at over 4 Å. These structural alterations, connected with a phase transition, become the origin of the strain, which in most cases causes crystal cleaving. In a sample composed from crystals crushed as a result of the phase transition or as a result of mechanical crumbling, the hysteresis loop vanishes; however, annealing the sample allows to its partial restoration. A replacement of acetonitrile by other nitriles leads to preservation of the polymeric structure and spin crossover, but no phase transition follows.

Highly Selective, High-Capacity Separation of o-Xylene from C8 Aromatics by a Switching Adsorbent Layered Material.

Purification of the C8 aromatics (xylenes and ethylbenzene) is particularly challenging because of their similar physical properties. It is also relevant because of their industrial utility. Physisorptive separation of C8 aromatics has long been suggested as an energy efficient solution but no physisorbent has yet combined high selectivity (>5) with high adsorption capacity (>50 wt %). Now a counterintuitive approach to the adsorptive separation of o-xylene from other C8 aromatics involves the study of a known nonporous layered material, [Co(bipy)2 (NCS)2 ]n (sql-1-Co-NCS), which can reversibly switch to C8 aromatics loaded phases with different switching pressures and kinetics, manifesting benchmark o-xylene selectivity (SOX/EB ≈60) and high saturation capacity (>80 wt %). Structural insight into the observed selectivity and capacity is gained by analysis of the crystal structures of C8 aromatics loaded phases.

Self-Assembly and Local Manipulation of Au-Pyridyl Coordination Networks on Metal Surfaces.

Using scanning tunnelling microscopy (STM), we demonstrate that Au-pyridyl coordination can be used to assemble two-dimensional coordination network structures on metal surfaces. The polymorphism of the coordination network structures can be manipulated at both the micro- and nanoscale. Using the same organic ligand, we assembled two distinct polymorphic network structures, which were assisted by threefold Au-pyridyl coordination on Ag(111) with predeposited Au atoms (α-network), and by twofold Au-pyridyl coordination on Au(111) (ß-network), respectively. Specifically on the Au(111) surface, single-oriented ß-network domains as large as ≈400 nm were selected by thermal annealing. We ascribe this global control strategy to distinct Au bonding modes tuned by molecule-substrate interactions. Using an STM tip, we succeeded in creating α-network domains (≈10 nm) locally within the homogeneous ß-network domain areas on Au(111) in a controlled manner.

Lanthanide Photoluminescence in Heterometallic Polycyanidometallate-Based Coordination Networks.

Solid-state functional luminescent materials arouse an enormous scientific interest due to their diverse applications in lighting, display devices, photonics, optical communication, low energy scintillation, optical storage, light conversion, or photovoltaics. Among all types of solid luminophors, the emissive coordination polymers, especially those based on luminescent trivalent lanthanide ions, exhibit a particularly large scope of light-emitting functionalities, fruitfully investigated in the aspects of chemical sensing, display devices, and bioimaging. Here, we present the complete overview of one of the promising families of photoluminescent coordination compounds, that are heterometallic d-f cyanido-bridged networks composed of lanthanide(3+) ions connected through cyanide bridges with polycyanidometallates of d-block metal ions. We are showing that the combination of cationic lanthanide complexes of selected inorganic and organic ligands with anionic homoligand [M(CN)x]n- (x = 2, 4, 6 and 8) or heteroligand [M(L)(CN)4]2- (L = bidentate organic ligand, M = transition metal ions) anions is the efficient route towards the emissive coordination networks revealing important optical properties, including 4f-metal-centred visible and near-infrared emission sensitized through metal-to-metal and/or ligand-to-metal energy transfer processes, and multi-coloured photoluminescence switchable by external stimuli such as excitation wavelength, temperature, or pressure.

Two-Dimensional Calix[4]arene-based Metal-Organic Coordination Networks of Tunable Crystallinity.

A flexible and versatile method to fabricate two-dimensional metal-organic coordination networks (MOCNs) by bottom-up self-assembly is described. 2D crystalline layers were formed at the air-water interface, coordinated by ions from the liquid phase, and transferred onto a solid substrate with their crystallinity preserved. By using an inherently three-dimensional amphiphile, namely 25,26,27,28-tetrapropoxycalix[4]arene-5,11,17,23-tetracarboxylic acid, and a copper metal node, large and monocrystalline dendritic MOCN domains were formed. The method described allows for the fabrication of monolayers of tunable crystallinity on liquid and solid substrates. It can be applied to a large range of differently functionalized organic building blocks, also beyond macrocycles, which can be interconnected by diverse metal nodes.

Surface-Supported Robust 2D Lanthanide-Carboxylate Coordination Networks.

Lanthanide-based metal-organic compounds and architectures are promising systems for sensing, heterogeneous catalysis, photoluminescence, and magnetism. Herein, the fabrication of interfacial 2D lanthanide-carboxylate networks is introduced. This study combines low- and variable-temperature scanning tunneling microscopy (STM) and X-ray photoemission spectroscopy (XPS) experiments, and density functional theory (DFT) calculations addressing their design and electronic properties. The bonding of ditopic linear linkers to Gd centers on a Cu(111) surface gives rise to extended nanoporous grids, comprising mononuclear nodes featuring eightfold lateral coordination. XPS and DFT elucidate the nature of the bond, indicating ionic characteristics, which is also manifest in appreciable thermal stability. This study introduces a new generation of robust low-dimensional metallosupramolecular systems incorporating the functionalities of the f-block elements.

Nanosized heterostructures of Au@Prussian blue analogues: towards multifunctionality at the nanoscale.

Access to multifunctionality at the nanoscale requires the development of hybrid nanostructures that combine materials of different natures. In this line of thought, current research on coordination polymers is not only focusing on their synthesis at the nanoscale, but also on combining these polymers with other materials. According to a novel and rational approach, single-layer Au@Prussian blue analogue (PBA) and double-layer Au@PBA@PBA' core-shell nanoparticles (NPs) may be obtained through the growth of a cyano-bridged coordination network on the gold surface. The nanosized heterostructures combine the plasmonic optical properties of the gold core and the magnetic properties of the PBA shell. Whereas the single-layer nanoparticles are paramagnetic, the double-layer nanostructures display ferromagnetism; therefore, the overall structural motif may be considered as multifunctional. The developed synthetic concept also includes an easy access to hollow PBA NPs.

A surface coordination network based on copper adatom trimers.

Surface coordination networks formed by co-adsorption of metal atoms and organic ligands have interesting properties, for example regarding catalysis and data storage. Surface coordination networks studied to date have typically been based on single metal atom centers. The formation of a novel surface coordination network is now demonstrated that is based on network nodes in the form of clusters consisting of three Cu adatoms. The network forms by deposition of tetrahydroxybenzene (THB) on Cu(111) under UHV conditions. As shown from a combination of scanning tunneling microscopy, X-ray photoelectron spectroscopy, and density functional theory calculations, all four hydroxy groups of THB dehydrogenate upon thermal activation at 440 K. This highly reactive ligand binds to Cu adatom trimers, which are resolved by high-resolution STM. The network creates an ordered array of mono-dispersed metal clusters constituting a two-dimensional analogue of metal-organic frameworks.

Interpenetration Phenomena via Anion Template Effects in Fe(II) and Co(II) Coordination Networks with a Bis-(1,2,4-triazole) Ligand.

Seven new coordination networks, [Fe(tbbt)3](BF4)2 (1), [Co(tbbt)3](BF4)2 (2), [Fe(tbbt)3](ClO4)2 (3), [Co(tbbt)3](ClO4)2 (4), [Fe(NCS)2(tbbt)2] (5), [Co(NCS)2(tbbt)2] (6), and [Fe(H2O)2(tbbt)2]Br2·2H2O (7), were synthesized with the linker 1,1'-(trans-2-butene-1,4-diyl)bis-1,2,4-triazole (tbbt) and structurally investigated. The structure of complexes 1-4 is composed of three interpenetrating, symmetry-related 3D networks. Each individual 3D network forms a primitive, nearly cubic lattice (pcu) with BF4- or ClO4- anions present in the interstitial spaces. The structure of compounds 5 and 6 is composed of two-dimensional sql layers, which are parallel to each other in the AB stacking type. These layers are interpenetrated by one-dimensional chains, both having the same formula unit, [M(NCS)2(tbbt)2] (M = Fe, Co). The structure of compound 7 consists of parallel, two-dimensional sql layers in the ABCD stacking type. The interpenetration in 1-6 is not controlled by π-π-interactions between the triazole rings or C=C bonds, as could have been expected, but by (triazole)C-H⋯F4B, C-H⋯O4Cl, and C-H⋯SCN anion hydrogen bonds, which suggests a template effect of the respective non-coordinated or coordinated anion for the interpenetration. In 7, the (triazole)C-H⋯Br anion interactions are supplemented by O-H⋯O and O-H⋯Br hydrogen bonds involving the aqua ligand and crystal water molecules. It is evident that the coordinated and non-coordinated anions play an essential role in the formation of the networks and guide the interpenetration. All iron(II) coordination networks are colorless, off-white to yellow-orange, and have the metal ions in the high-spin state down to 77 K. Compound 5 stays in the high spin state even at temperatures down to 10 K.