Synergy Between Surface Confinement and Heterointerfacial Regulations with Fast Electron/Ion Migration in InSe-PPy for Sodium-Ion Storage.

Layered indium selenide (InSe) is a new 2D semiconductor material with high carrier mobility, widely adjustable bandgap, and high ductility. However, its ion storage behavior and related electrochemical reaction mechanism are rarely reported. In this study, InSe nanoflakes encapsulated in conductive polypyrrole (InSe@PPy) are designed in consideration of restraining the severe volume change in the electrochemical reaction and increasing conductivity via in situ chemical oxidation polymerization. Density functional theory calculations demonstrate that the construction of heterostructure can generate an internal electric field to accelerate electron transfer via additional driving forces, offering synergistically enhanced structural stability, electrical conductivity, and Na+ diffusion process. The resulting InSe@PPy composite shows outstanding electrochemical performance in the sodium ion batteries system, achieving a high reversible capacity of 336.4 mA h g-1 after 500 cycles at 1 A g-1 and a long-term cyclic stability with capacity of 274.4 mA h g-1 after 2800 cycles at 5 A g-1 . In particular, the investigation of capacity fluctuation within the first cycling reveals the alternating significance of intercalation and conversion reactions and evanescent alloying reaction. The combined reaction mechanism of insertion, conversion, and alloying of InSe@PPy is revealed by in situ X-ray diffraction, ex situ electrochemical impedance spectroscopy, and transmission electron microscopy.

Controlling of Crystal Facets by Dysprosium-Modified WO3/Carbon Nanofibers Enhance the Flexible Supercapacitor Performance.

Dysprosium-modified tungsten oxide/carbon nanofibers (Dy-WO3/PCNFs) are fabricated via electrospinning combined with high-temperature calcination to synthesize a flexible, self-supporting electrode material that does not require a conductive agent or binder. XRD and TEM analyses showed that introducing dysprosium promoted the preferential growth of WO3 crystals along the preponderance crystal planes involved in the electrochemical reaction, enhancing the exposure of the (002) and (200) crystal planes. Furthermore, DFT calculations demonstrated that the incorporation of Dy resulted in enhanced adsorption of Dy-WO3 by PCNFs, with an adsorption energy of -1.21 eV. The Bader charge results indicate a transfer of 1.70 |e| from PCNFs to Dy-WO3. DFT calculations demonstrate that strong adsorption facilitates charge adsorption/desorption, which contributes to charge transfer and enhances storage capacity. The prepared Dy-WO3/PCNFs exhibited a high specific capacitance (557.28 F g-1 at 0.5 A g-1). Supercapacitors assembled with Dy-WO3/PCNFs as the positive electrode and CNFs as the negative electrode have high energy density (29.8 Wh kg-1 at a power density of 363.48 W kg-1). This study demonstrates the successful synthesis of Dy-WO3/PCNFs with exceptional electrochemical properties and offers significant insights into the design and application of flexible electrodes by incorporating dysprosium to modulate the crystal surface of WO3.

Construction of Nickel Molybdenum Sulfide/Black Phosphorous 3D Hierarchical Structure Toward High Performance Supercapacitor Electrodes.

Supercapacitors (SCs) with outstanding versatility have a lot of potential applications in next-generation electronics. However, their practical uses are limited by their short working potential window and ultralow-specific capacity. Herein, the facile one-step in-situ hydrothermal synthesis is employed for the construction of a NiMo3S4/BP (black phosphorous) hybrid with a 3D hierarchical structure. After optimization, the NiMo3S4/BP hybrid displays a high specific capacitance of 830 F/g at 1 A/g compared to the pristine NiMo3S4 electrode. The fabricated NiMo3S4/BP//NiCo2S4/Ti3C2Tx asymmetric supercapacitor exhibits a better specific capacitance of 120 F/g at 0.5 A/g, which also demonstrates a high energy density of 54 Wh/kg at 1148.53 W/kg and good cycle stability with capacity retention of 86% and 97% of Coulombic efficiency after 6000 cycles. Further from the DFT simulations, the hybrid NiMo3S4/BP structure shows higher conductivity and quantum capacitance, which demonstrate greater charge storage capability, due to enhanced electronic states near the Fermi level. The lower diffusion energy barrier for the electrolyte K+ ions in the hybrid structure is facilitated by improved charge transfer performance for the hybrid NiMo3S4/BP. This work highlights the potential significance of hybrid nanoarchitectonics and compositional tunability as an emerging method for improving the charge storage capabilities of active electrodes.

Interfacial Electron Engineering of PdSn-NbN/C for Highly Efficient Cleavage of the C-C Bonds in Alkaline Ethanol Electrooxidation.

The splitting of the C-C bonds of ethanol remains a key issue to be addressed, despite tremendous efforts made over the past several decades. This study highlights the enhancement mechanism of inexpensive NbN-modified Pd1 Sn3 -NbN/C towards the C-C bonds cleavage for alkaline ethanol oxidation reaction (EOR). The optimal Pd1 Sn3 -NbN/C delivers a catalytic activity up to 43.5 times higher than that of commercial Pd/C and high carbonate selectivity (20.5%) toward alkaline EOR. Most impressively, the Pd1 Sn3 -NbN/C presents good durability even after 25 200 s of chronoamperometric testing. The enhanced catalytic performance is mainly due to the interfacial interaction between PdSn and NbN, demonstrated by multiple structural characterization results. In addition, in situ ATR-SEIRAS (Attenuated total reflection-surface enhanced infrared absorption spectroscopy) results suggest that NbN facilitates the C-C bonds cleavage towards the alkaline EOR, followed by the enhanced OH adsorption to promote the subsequent oxidation of C1 intermediates after doping Sn. DFT (density functional theory) calculations indicate that the activation barriers of the C-H bond cleavage in CH3 CH2 OH, CH3 CHOH, CH3 CHO, CH3 CO, CH2 CO, and the C-C bond cleavage in CH3 CO, CH2 CO, CHCO are evidently reduced and the removal of adsorbed CH3 CO and CO becomes easier on the PdSn-NbN/C catalyst surface.

Unraveling the Performance Descriptors for Designing Single-Atom Catalysts on Defective MXenes for Exclusive Nitrate-To-Ammonia Electrocatalytic Upcycling.

Electrocatalytic nitrate reduction reaction (NO3 RR) is a promising approach for converting nitrate into environmentally benign or even value-added products such as ammonia (NH3 ) using renewable electricity. However, the poor understanding of the catalytic mechanism on metal-based surface catalysts hinders the development of high-performance NO3 RR catalysts. In this study, the NO3 RR mechanism of single-atom catalysts (SACs) is systematically explored by constructing single transition metal atoms supported on MXene with oxygen vacancies (Ov -MXene) using density functional theory (DFT) calculations. The results indicate that Ag/Ov -MXene (for precious metal) and Cu/Ov -MXene (for non-precious metal) are highly efficient SACs for NO3 RR toward NH3 , with low limiting potentials of -0.24 and -0.34 V, respectively. Furthermore, these catalysts show excellent selectivity toward ammonia due to the high energy barriers associated to the formation of byproducts such as NO2 , NO, N2 O, and N2 on Ag/Ov -MXene and Cu/Ov -MXene, effectively suppressing the competitive hydrogen evolution reaction (HER). The findings not only offer new strategies for promoting NH3 production by MXene-based SACs electrocatalysts under ambient conditions but also provide insights for the development of next-generation NO3 RR electrocatalysts.

Regulating the Oxygen Vacancy and Electronic Structure of NiCo Layered Double Hydroxides by Molybdenum Doping for High-Power Hybrid Supercapacitors.

Amelioration of nickel-cobalt layered double hydroxides (NiCo-LDH) with a high specific theoretical capacitance is of great desire for high-power supercapacitors. Herein, a molybdenum (Mo) doping strategy is proposed to improve the charge-storage performance of NiCo-LDH nanosheets growing on carbon cloth (CC) via a rapid microwave process. The regulation of the electronic structure and oxygen vacancy of the LDH is consolidated by the density functional theory (DFT) calculation, which demonstrates that Mo doping narrows the band gap, reduces the formation energy of hydroxyl vacancies, and promotes ionic and charge transfer as well as electrolyte adsorption on the electrode surface. The optimal Mo-doped NiCo-LDH electrode (MoNiCo-LDH-0.05/CC) has an amazing specific capacity of 471.1 mA h g-1 at 1 A g-1 , and excellent capacity retention of 84.8% at 32 A g-1 , far superior to NiCo-LDH/CC (258.3 mA h g-1 and 76.4%). The constructed hybrid supercapacitor delivers an energy density of 103.3 W h kg-1 at a power density of 750 W kg-1 and retains the cycle retention of 85.2% after 5000 cycles. Two assembled devices in series can drive thirty LED lamps, revealing a potential application prospect of the rationally synthesized MoNiCo-LDH/CC as an energy-storage electrode material.

The Magnesium Insertion Effects into P2-Type Na2/3 Ni1/3 Mn2/3 O2.

A Mg-cell with P2-Na2/3 Ni1/3 Mn2/3 O2 layered oxide cathode provides novel reaction mechanism not observed in Na-cells. The sodium/vacancy ordering and Jahn-Teller effects are suppressed with the insertion of magnesium ion. The Mg-cell exhibits different features when operating between 4.5 and 0.15 V and 3.9 and 0.15 V versus Mg2+ /Mg. To analyze the structural and chemical changes during Mg insertion, the cathode is first charged to obtain the Na1/3 Ni1/3 Mn2/3 O2 compound, which is formally accompanied by an oxidation from Ni2+ to Ni3+ . As structure models Mg1/6 Na1/3 Ni1/3 Mn2/3 O2 and Mg1/12 Na1/2 Ni1/3 Mn2/3 O2 are utilized with a large 2 3 a $2\sqrt 3 a$ × 2 3 a $2\sqrt 3 a$ supercell. On discharge, the Mg-cell exhibits a multistep profile which reaches ≈100 mA h g-1 with the valence change from Ni3+ to Ni2+ . Such profile is quite different from its sodium counterpart (230 mA h g-1 ) which exhibits the sodium/vacancy ordering and deleterious presence of Mn3+ . Depending on how the two interlayer spacings are filled by Na and Mg the "staged," "intermediated," and "average" models are analyzed for Mgy Na8 Ni8 Mn16 O48 supercell. This fact suggests differences in the cell performance when Mg is used as counter electrode providing some tips to improve the structure engineering on cathode materials.

Breaking Scaling Relations for Highly Efficient Electroreduction of CO2 to CO on Atomically Dispersed Heteronuclear Dual-Atom Catalyst.

Conversion of CO2 into value-added products by electrocatalysis provides a promising way to mitigate energy and environmental problems. However, it is greatly limited by the scaling relationship between the adsorption strength of intermediates. Herein, Mn and Ni single-atom catalysts, homonuclear dual-atom catalysts (DACs), and heteronuclear DACs are synthesized. Aberration-corrected annular dark-field scanning transmission electron microscopy (ADF-STEM) and X-ray absorption spectroscopy characterization uncovered the existence of the Mn─Ni pair in Mn─Ni DAC. X-ray photoelectron spectroscopy and X-ray absorption near-edge spectroscopy reveal that Mn donated electrons to Ni atoms in Mn─Ni DAC. Consequently, Mn─Ni DAC displays the highest CO Faradaic efficiency of 98.7% at -0.7 V versus reversible hydrogen electrode (vs RHE) with CO partial current density of 16.8 mA cm-2. Density functional theory calculations disclose that the scaling relationship between the binding strength of intermediates is broken, resulting in superior performance for ECR to CO over Mn─Ni─NC catalyst.

Tailoring Advanced CdS Anisotropy-Driven Charge Spatial Vectorial Separation and Migration via In Situ Dual Co-Catalyst Synergistic Layout.

Tailoring advanced anisotropy-driven efficient separation and migration of photogenerated carriers is a pivotal stride toward enhancing photocatalytic activity. Here, CdS-MoS2 binary photocatalysts are tailored into a dumbbell shape by leveraging the rod-shaped morphology of CdS and employing an in situ tip-induction strategy. To further enhance the photocatalytic activity, an in situ photo-deposition strategy is incorporated to cultivate MnOx particles on the dumbbell-shaped CdS-MoS2. The in situ deposition of MnOx effectively isolated the oxidatively active sites on the CdS surface, emphasizing the reductively active crystalline face of CdS, specifically the (002) face. Benefiting from its robust activity as a reduction active site, MoS2 adeptly captures photogenerated electrons, facilitating the reduction of H+ to produce hydrogen. The anisotropically driven separation of CdS photogenerated carriers markedly mitigates the Coulomb force or binding force of the photogenerated electrons, thus promoting a smoother migration toward the active site for photocatalytic hydrogen evolution. The hydrogen evolution rate of 35MnOx-CdS-MoS2-3 surpasses that of CdS by nearly an order of magnitude, achieving a quantum efficiency of 22.30% at 450 nm. Under simulated solar irradiation, it attains a rate of 42.86 mmol g-1 h-1. This work imparts valuable insights for the design of dual co-catalysts, anisotropy-driven spatial vectorial charge separation and migration, and the analysis of migration pathways of photogenerated carriers.

Carbon Corrosion Induced by Surface Defects Accelerates Degradation of Platinum/Graphene Catalysts in Oxygen Reduction Reaction.

Graphene supported electrocatalysts have demonstrated remarkable catalytic performance for oxygen reduction reaction (ORR). However, their durability and cycling performance are greatly limited by Oswald ripening of platinum (Pt) and graphene support corrosion. Moreover, comprehensive studies on the mechanisms of catalysts degradation under 0.6-1.6 V versus RHE (Reversible Hydrogen Electrode) is still lacking. Herein, degradation mechanisms triggered by different defects on graphene supports are investigated by two cycling protocols. In the start-up/shutdown cycling (1.0-1.6 V vs. RHE), carbon oxidation reaction (COR) leads to shedding or swarm-like aggregation of Pt nanoparticles (NPs). Theoretical simulation results show that the expansion of vacancy defects promotes reaction kinetics of the decisive step in COR, reducing its reaction overpotential. While under the load cycling (0.6-1.0 V vs. RHE), oxygen containing defects lead to an elevated content of Pt in its oxidation state which intensifies Oswald ripening of Pt. The presence of vacancy defects can enhance the transfer of electrons from graphene to the Pt surface, reducing the d-band center of Pt and making it more difficult for the oxidation state of platinum to form in the cycling. This work will provide comprehensive understanding on Pt/Graphene catalysts degradation mechanisms.

Pulsed Laser Ablation of Oxygen deficiency Enriched Superlattice Vanadium Pentoxide (V2O5) Ultrathin Nextrode aiming for Flexible Binder-less Tandem Energy Harvesting Devices.

For the initial instance, oxygen deficiency-enriched vanadium pentoxide (O─V2O5@500) thin film electrodes are tuned by the Pulsed Laser Ablation technique. The O─V2O5@500 thin film electrode shows remarkable electrochemical performances confirming the greater potential window of -0.4 to 0.9 V versus Hg/HgO in an alkaline electrolyte; also, the O─V2O5@ 500 thin film electrode exhibits a noteworthy volumetric capacity of 167.7 mAh cm-3 (areal capacity of 73.3 µAh cm-2). Additionally, Density Functional Theory (DFT) theory calculations are carried out for oxygen-deficient V2O5. From the partial density of states (pDOS) and partial charge density analysis, it is clear that oxygen vacancy improves the electrical conductivity due to the higher degree of electron delocalization of V─O─V near the vacancy and enhances the redox properties due to the formation of in-gap states. Further, it is reported that a O─V2O5@ 500 ||PVA-KOH|| Bi2O3 A-650 thin film supercapbattery (TFSCB) device attains an exceptional discharge volumetric capacitance of 182.85 F cm-3 (equal volumetric capacity of 124.5 mAh cm-3). Furthermore, the TFSCB device exhibits an extraordinary maximum volumetric energy (power) density of 14.28 mWh cm-3 (1.66 W cm-3); TFSCB succeeds in supreme capacity retention of 86% with outstanding coulombic efficiency of 94.4% after 21 000 cycles.

Switching Electric Double Layer Potential by Phase Structure Control for Advanced Oxygen Reduction Reaction of Cobalt@Nitrogen Doped Carbon Core-Shell.

The key to design an advanced oxygen reduction reaction (ORR) electrocatalyst is a well-balance between the adsorption and desorption of oxygen intermediates. This study systematically evaluated the ORR activity of HCP and FCC cobalt core-shell cobalt/N-doped carbon (Cobalt@NC) catalyst via theoretical and experimental studies. The electronic structure calculations using density functional theory (DFT) calculations revealed that the ORR activity of carbon layer can be improved by 1) switching the electrostatic potential in the electrical double layer due to the polarization induced at the carbon-cobalt interface and 2) modulating the electron population in the bonding orbital in the C-O bonds in an ORR. The results revealed that an O atom is bounded stronger to the outer NC shell with FCC Cobalt than HCP Cobalt, which hindered the desorption steps of OH*. Experimentally, plasma-engineered HCP Cobalt@NC also showed remarkably advanced performance toward ORR compared to that FCC Cobalt@NC. The kinetic current density of HCP Cobalt@NC at 0.85 V versus RHE is calculated as 6.24 mA cm-2, which is six folds higher than FCC Cobalt@NC and even outperform 20 wt.% Pt/C. In a practical Aluminium-air battery, HCP Cobalt@NC also exhibited slightly higher peak power density (110.57 mW cm-2) compared to 20 wt.% Pt/C.

BiVO4 Photoanodes Enhanced with Metal Phosphide Co-Catalysts: Relevant Properties to Boost Photoanode Performance.

Achieving highly performant photoanodes for oxygen evolution is key to developing photoelectrochemical devices for solar water splitting. In this work, BiVO4 photoanodes are enhanced with a series of core-shell structured bimetallic nickel-cobalt phosphides (MPs), and key insights into the role of co-catalysts are provided. The best BiVO4 /Ni1.5 Co0.5 P and BiVO4 /Ni0.5 Co1.5 P photoanodes achieve a 3.5-fold increase in photocurrent compared with bare BiVO4 . It is discovered that this enhanced performance arises from a synergy between work function, catalytic activity, and capacitive ability of the MPs. Distribution of relaxation times analysis reveals that the contact between the MPs, BiVO4 , and the electrolyte gives rise to three routes for hole injection into the electrolyte, all of which are significantly improved by the presence of a second metal cation in the co-catalyst. Kinetic studies demonstrate that the significantly improved interfacial charge injection is due to a lower charge-transfer resistance, enhanced oxygen-evolution reaction kinetics, and larger surface hole concentrations, providing deeper insights into the carrier dynamics in these photoanode/co-catalyst systems for their rational design.

Breaking the Pt Electron Symmetry and OH Spillover towards PtIr Active Center for Performance Modulation in Direct Ammonia Fuel Cell.

The growing interest in low-temperature direct ammonia fuel cells (DAFCs) arises from the utilization of a carbon-neutral ammonia source; however, DAFCs encounter significant electrode overpotentials due to the substantial energy barrier of the *NH2 to *NH dehydrogenation, compounded by the facile deactivation by *N on the Pt surface. In this work, a unique catalyst, Pt4Ir@AlOOH/NGr i.e., Pt4Ir/ANGr, is introduced composed of PtIr alloy nanoparticles controllably decorated on the pseudo-boehmite phase of AlOOH-supported nitrogen-doped reduced graphene (AlOOH/NGr) composite, synthesized via the polyol reduction method. The detailed studies on the structural and electronic properties of the catalyst by XAS and VB-XPS reveal the possible electronic modulations. The optimized Pt4Ir/ANGr composition exhibits a significantly improved onset potential and mass activity for AOR. The DFT study confirms the OHad species spillover by AlOOH and Pt4Ir (100) facilitates the conversion of the *NH2 to *NH with minimal energy barriers. Finally, testing of DAFC at the system level using a membrane electrode assembly (MEA) with Pt4Ir/ANGr as the anode catalyst, demonstrating the suitability of the catalyst for its practical applications. This study thus uncovers the potential of the Pt4Ir catalyst in synergy with ANGr, largely addressing the challenges in hydrogen transportation, storage, and safety within DAFCs.

Enhanced Sensitivity in Photovoltaic 2D MoS2/Te Heterojunction VOC Sensors.

Volatile organic compound (VOC) sensors have a broad range of applications including healthcare monitoring, product quality control, and air quality management. However, many such applications are demanding, requiring sensors with high sensitivity and selectivity. 2D materials are extensively used in many VOC sensing devices due to their large surface-to-volume ratio and fascinating electronic properties. These properties, along with their exceptional flexibility, low power consumption, room-temperature operation, chemical functionalization potential, and defect engineering capabilities, make 2D materials ideal for high-performance VOC sensing. Here, a 2D MoS2/Te heterojunction is reported that significantly improves the VOC detection compared to MoS2 and Te sensors on their own. Density functional theory (DFT) analysis shows that the MoS2/Te heterojunction significantly enhances the adsorption energy and therefore sensing sensitivity of the sensor. The sensor response, which denotes the percentage change in the sensor's conductance upon VOC exposure, is further enhanced under photo-illumination and zero-bias conditions to values up to ≈7000% when exposed to butanone. The MoS2/Te heterojunction is therefore a promising device architecture for portable and wearable sensing applications.

Advancing Gold Redox Catalysis: Mechanistic Insights, Nucleophilicity-Guided Transmetalation, and Predictive Frameworks for the Oxidation of Aryl Gold(I) Complexes.

Gold redox catalysis, often facilitated by hypervalent iodine(III) reagents, offers unique reactivity but its progress is mainly hindered by an incomplete mechanistic understanding. In this study, we investigated the reaction between the gold(I) complexes [(aryl)Au(PR3 )] and the hypervalent iodine(III) reagent PhICl2 , both experimentally and computationally and provided an explanation for the formation of divergent products as the ligands bonded to the gold(I) center change. We tackled this essential question by uncovering an intriguing transmetalation mechanism that takes place between gold(I) and gold(III) complexes. We found that the ease of transmetalation is governed by the nucleophilicity of the gold(I) complex, [(aryl)Au(PR3 )], with greater nucleophilicity leading to a lower activation energy barrier. Remarkably, transmetalation is mainly controlled by a single orbital - the gold dx 2 -y 2 orbital. This orbital also has a profound influence on the reactivity of the oxidative addition step. In this way, the fundamental mechanistic basis of divergent outcomes in reactions of aryl gold(I) complexes with PhICl2 was established and these observations are reconciled from first principles. The theoretical model developed in this study provides a conceptual framework for anticipating the outcomes of reactions involving [(aryl)Au(PR3 )] with PhICl2 , thereby establishing a solid foundation for further advancements in this field.

Size and Morphology Dependent Activity of Cu Clusters for CO2 Activation and Reduction: A First Principles Investigation.

Various Cu-based materials in diverse forms have been investigated as efficient catalysts for electrochemical reduction of CO2; however, they suffer from issues such as higher over potential and poor selectivity. The activity and selectivity of CO2 electro reduction have been shown to change significantly when the surface morphology (steps, kinks, and edges) of these catalysts is altered. In light of this, size and morphology dependent activity of selected copper clusters, Cun (n=2-20) have been evaluated for the activation and reduction of CO2 molecule. The phase-space of these copper clusters is rich in conformations of distinct morphologies starting from planar, 2D geometries to prolate-shaped geometries and also high-symmetry structures. The binding efficiency and the activation of CO2 are highest for medium sized clusters (n=9-17) with prolate-morphologies as compared to small or larger sized CunCO2 clusters that are existing mainly as planar (triangular, tetragonal etc.) or highly-symmetric geometries (icosahedron, capped-icosahedron etc.), respectively. The best performing (prolate-shaped) CunCO2 conformations are quite fluxional and also they are thermally stable, as demonstrated by the molecular dynamics simulations. Furthermore, on these CunCO2 conformations, the step-by-step hydrogenation pathways of CO2 to produce value-added products like methanol, formic acid, and methane are exceptionally favorable and energy-efficient.

Adsorption Structures, Vibrational Raman Spectra and Chemical Binding Properties of Thioglycolic Acid on Cu(111) Surfaces: A DFT Study.

Copper is widely used in everyday life and industrial production because of its good electrical and thermal conductivity. To overcome copper oxidation and maintain its good physical properties, small organic molecules adsorbed on the surface of copper make a passivated layer to further avoid copper corrosion. In this work, we have investigated thioglycolic acid (TGA, another name is mercaptoacetic acid) adsorbed on copper surfaces by using density functional theory (DFT) calculations and a periodical slab model. We first get five stable adsorption structures, and the binding interaction between TGA and Cu(111) surfaces by using density of states (DOS), indicating that the most stable configuration adopts a triple-end binding model. Then, we analyze the vibrational Raman spectra of TGA adsorbed on the Cu(111) surface and make vibrational assignments according to the vibrational vectors. Finally, we explore the temperature effect of the thermodynamically Gibbs free energy of TGA on the Cu(111) surface and the antioxidant ability of the small organic molecular layer of copper oxidation on the copper surface. Our calculated results further provide evidences to interpret the stability of adsorption structures and antioxidant properties of copper.

Efficiency Conceptualization Model: A Theoretical Method for Predicting the Turnover of Catalysts.

In recent times, the theoretical prediction of catalytic efficiency is of utmost urgency. With the advent of density functional theory (DFT), reliable computations can delineate a quantitative aspect of the study. To this state-of-the-art approach, valuable incorporation would be a tool that can acknowledge the efficiency of a catalyst. In the current work, we developed the efficiency conceptualization model (ECM) that utilizes the quantum mechanical tool to achieve efficiency in terms of turnover frequency (TOF). Twenty-six experimentally designed transition metal (TM) water oxidation catalysts were chosen under similar experimental conditions of temperature, pressure, and pH to execute the same. The computations conclude that the Fe-based [Fe(OTf)2(Me2Pytacn)] (MWOC-17) is a highly active catalyst and, therefore, can endure for more time in the catalytic cycle. Our results conclude that the Ir-based catalysts [Cp*Ir(κ2-N,O)X] with MWOC-23: X=Cl; and MWOC-24: X=NO3 report the highest computed turnover numbers (TONs), τ c o m p u t e d T O N 0 ${\tau _{computed\;TON}^0 }$ of 406 and 490 against the highest experimental TONs, τ e x p e r i m e n t a l T O N ${\tau _{experimental\;TON} }$ of 1200 and 2000 respectively, whereas the Co-based [Co(12-TMC)]2+ (MWOC-19) has the lowest TONs ( τ c o m p u t e d T O N 0 ${\tau _{computed\;TON}^0 }$ =19, τexperimental TON=16) among the chosen catalysts and thereby successful in corroborating the previous experimental results.

Prediction of Feasibility of Polaronic OER on (110) Surface of Rutile TiO2.

The polaronic effects at the atomic level hold paramount significance for advancing the efficacy of transition metal oxides in applications pertinent to renewable energy. The lattice-distortion mediated localization of photoexcited carriers in the form of polarons plays a pivotal role in the photocatalysis. This investigation focuses on rutile TiO2, an important material extensively explored for solar energy conversion in artificial photosynthesis, specifically targeting the generation of green H2 through photoelectrochemical (PEC) H2O splitting. By employing Hubbard-U corrected and hybrid density functional theory (DFT) methods, we systematically probe the polaronic effects in the catalysis of oxygen evolution reaction (OER) on the (110) surface of rutile TiO2. Theoretical understanding of polarons within the surface, coupled with simulations of OER at distinct titanium (Ti) and oxygen (O) active sites, reveals diverse polaron formation energies within the lattice sites with strong preference for bulk and surface bridge (Ob) oxygen sites. Moreover, we provide the evidence for the facilitative role of polarons in OER. We find that hole polarons situated at the equatorial oxygen sites near the Ti-active site, along with bridge site hole polarons distal from the Ob active site yield a small reduction in OER overpotential by ~0.06 eV and ~0.12 eV, respectively. However, subsurface, equatorial, and bridge site hole polarons significantly reduce the Ti-active site OER overpotential by ~0.4 eV through the peroxo-type oxygen pathway. We also observe that the presence of hole polarons stabilizes the *OH, *O, and *OOH intermediate species compared to the scenario without hole polarons. Overall, this study provides a detailed mechanistic insight into polaron-mediated OER, offering a promising avenue for improving the catalytic activity of transition metal oxide-based photocatalysts catering to renewable energy requisites.