Development and validation of stability indicating assay method for mitapivat: Identification of novel hydrolytic, photolytic, and oxidative forced degradation products employing quadrupole-time of flight mass spectrometry.

Mitapivat is a novel, first-in-class orally active pyruvate kinase activator approved by the US Food and Drug Administration in 2022 for the treatment of hemolytic anemia. There is no literature available regarding the identification of degradation impurities of mitapivat. The present study deals with the degradation behavior of mitapivat under various stress conditions such as hydrolytic, photolytic, thermal, and oxidative stress. The multivariate analysis found that the independent variables, that is, molarity, temperature, and time, are interacting with each other to affect the degradation of mitapivat. A specific, accurate, and precise high-performance liquid chromatographic (HPLC) method was developed to separate mitapivat from its degradation products. The separation was achieved on the C-18 column (250 mm × 4.6 mm × 5 µm) using the combination of 0.1% formic acid buffer and acetonitrile in gradient elution profile. The method was validated as per the International Council for Harmonization of Technical Requirements for Pharmaceuticals for Human Use Q2(R2) guideline. LC-electrospray ionization-Quadrupole-time of flight was employed to identify degradation products. A total of seven novel degradation products of mitapivat were identified based on tandem mass spectrometry and accurate mass measurement. In-silico toxicity of mitapivat and its degradation products was qualitatively evaluated by the DEREK toxicity prediction tool.

Analytical quality by design-based stability-indicating high performance liquid chromatography method for the estimation of evogliptin tartrate in bulk and tablet dosage form.

The present study utilized Analytical Quality by Design (AQbD) approach to develop a stability-indicating high-performance liquid chromatography (HPLC) method for estimating evogliptin tartrate using design expert software. The key parameters were methodically optimized, contours were plotted, and stability was evaluated using various forced degradation conditions. Using an Agilent HPLC system with a photo diode array (PDA) detector along with Fortis C18 column (250 × 4.6 mm, 5 µm) effectively separated the drug from its degradants. The mobile phase used was methanol: water (pH adjusted to 3.0, 76:24; v/v) at 0.8 mL/min flow rate. Evogliptin was eluted at 2.98 min, at a detection wavelength of 267 nm. The proposed method was found to be specific, precise, linear and robust. The drug was sensitive to acidic, basic, oxidative, thermal, and photodegradation resolving six degradation products. Thus, the developed AQbD-based stability-indicating HPLC method is applicable in analyzing evogliptin in bulk, tablet dosage form and stability samples.

Innovative UPLC technique for concurrent quantification of etofenamate and benzyl nicotinate in the presence of methylparaben and benzyl alcohol in their topical cream: Greens, white, and Six Sigma methodologies.

The efficacious treatment of muscle and joint pain relies heavily on etofenamate (ETO) and benzyl nicotinate (BN), which possess robust anti-inflammatory and pain-relieving properties when paired with methylparaben (MP) or benzyl alcohol (BA). In this study, we have established and validated innovative RP-UPLC methods for assessing ETO and BN in the presence of MP or BA in their dosage forms, employing eight green tools to evaluate their eco-friendliness and effectiveness. Reversed phase-ultra-performance liquid chromatography (RP-UPLC) technique employs a flow rate of 0.3 mL/min on Waters Acquity UPLC BEH Column (C18, 1.7 µm, 100 mm × 2.1 mm), detection at 254 nm using a photo diode array (PDA) detector and mobile phase of 0.05 M KH2PO4 buffer, acetonitrile, and methanol (50:15:35, v/v/v) adjusted pH 6.0 with 0.2% triethylamine. For ETO, BN, MP, and BA, the calibration curves were linear and ranged from 0.005 to 1.0, from 0.001 to 0.2, from 0.002 to 0.08, and from 0.0001 to 0.1 mg/mL, respectively. The correlation value was 0.9999, and the accuracy findings ranged from 98.81% to 100.56%. Consequently, the methodology has been successfully implemented in assay testing for the pharmaceuticals in the presence of the MP or BA, demonstrating the high selectivity of these approaches. The present study presents the Blue Applicability Grade Index (BAGI), an innovative approach that complements green metrics in practical white analytical chemistry. According to the International Council for Harmonisation (ICH) criteria, the procedures were effectively validated.

Identification and characterization of two new oxidation degradation impurities in cinnarizine through LC-HRMS/MS and 1H NMR, along with in silico toxicity predictions of its degradation products.

Cinnarizine (CIN) drug substance is a US FDA and EMA approved antihistaminic drug, There is no report available on CIN for the identification of degradation products and their degradation pathway. Herein, we report a stability-indicating assay method for CIN, the formation and characterization of its major degradation products using LC-HRMS/MS and 1H-NMR techniques. CIN was subjected to oxidation, acid, base, thermal and photolytic degradation conditions. Two unknown degradation products (DP-1 and DP-2) of CIN were formed under oxidative conditions. We successfully separated these degradants using gradient elution on an Inertsil ODS 3 V column (150 × 4.6 mm, 5 µm) using mobile phase A consisting of 0.1% formic acid and the mobile phase B consisting of 0.1% formic acid/acetonitrile (20/80, v/v). CIN was labile to oxidative conditions and stable to acidic, alkaline hydrolytic, photolytic and thermal conditions. The degradation pathways were derived from the nature of the product formed under oxidative degradation conditions and available reports for confirmation of the mechanism. Since the stability-indicating assay method can be utilized for stability studies and routine quality control of CIN in both the pharmaceutical industry and research laboratories. This method has been validated in compliance with the guidelines set forth by the ICH.

Development, evaluation of critical method variables and stability assessment using a Box-Behnken design for the determination of organic impurities in a pharmaceutical dosage form of a centrally acting muscle relaxant drug chlorzoxazone.

This study validates a stability-indicating LC method for detecting organic impurities in the chlorzoxazone dosage form. Using a Waters X-Select R HSS T3 analytical column, mobile phase of it was made by mixing of water, methanol, and glacial acetic acid in the ratio of 700:300:10 (v/v/v). The drug product and drug substance were subjected to the stress conditions such as acid, base, oxidation, heat, and photolysis as per the recommendations of the International Conference on Harmonization (Q2) methodology. The study revealed the susceptibility of 4-chloro-2-aminophenol to alkaline environments, emphasizing peak homogeneity and stability. The method verification, per ICH guidelines and USP<1225>, established precision, specificity, linearity, accuracy, and robustness for quality control. The mean impurity recovery ranged from 95.5% to 105.2%, the correlation coefficient (r) was greater than 1.000, and the RSD values (n = 6) ranged from 0.6% to 5.1% across the LOQ-150% ranges. Full-factorial design tested final method conditions, evaluating multiple parameters concurrently. Graphical optimization within the design space defined strong method requirements, ensuring consistent and reliable outcomes. The study develops and validates chlorzoxazone stability-indicating methods, employing advanced statistical approaches like design of experiments and factorial design, with resilient conditions established through graphical optimization of the design space.

An Overview of Degradation Strategies for Amitriptyline.

Antidepressant drugs play a crucial role in the treatment of mental health disorders, but their efficacy and safety can be compromised by drug degradation. Recent reports point to several drugs found in concentrations ranging from the limit of detection (LOD) to hundreds of ng/L in wastewater plants around the globe; hence, antidepressants can be considered emerging pollutants with potential consequences for human health and wellbeing. Understanding and implementing effective degradation strategies are essential not only to ensure the stability and potency of these medications but also for their safe disposal in line with current environment remediation goals. This review provides an overview of degradation pathways for amitriptyline, a typical tricyclic antidepressant drug, by exploring chemical routes such as oxidation, hydrolysis, and photodegradation. Connex issues such as stability-enhancing approaches through formulation and packaging considerations, regulatory guidelines, and quality control measures are also briefly noted. Specific case studies of amitriptyline degradation pathways forecast the future perspectives and challenges in this field, helping researchers and pharmaceutical manufacturers to provide guidelines for the most effective degradation pathways employed for minimal environmental impact.

Greens appraisal of validated stability indicating RP-HPLC method and forced degradation study for quantification of Ebastine in wastewater and dosage form.

OBJECTIVES: Allergic rhinitis and chronic idiopathic urticaria are common conditions triggered by environmental irritants, stress, and certain foods. The FDA has recently announced that the efficacy and safety of Ebastine (EBS) have been thoroughly evaluated and confirmed. This study considered using various tools to assess their greenness. We used AGREEprep, analytical eco-scale (ESA), and analytical method volume intensity (AMVI) to evaluate the greenness of the validated stability-indicating method and a forced degradation study. This allowed for easy determination and quantitation of EBS in wastewater and dosage form. METHODS: The method was established on Symmetry RP-C18 (150mm×4.6mm,5µm) using mobile phase, which can be prepared by mixing buffer solution of pH 3 with acetonitrile in a ratio of (37.5: 62.5, v/v) in addition to dissolving 0.72 gm of sodium lauryl sulfate in the final solution. The separation process was executed at a flow rate of 1.5mL/min and 5µL injection volume with UV detection at 254nm. Linearity was conducted for EBS in the 5-50µg/mL range. Different validation parameters were investigated, including accuracy, precision, robustness, and specificity. RESULTS: The limits of both detection and quantification were 0.84µg/mL and 2.57µg/mL for EBS. The recovery percentages of EBS were found to be 101.01% and 101.02% for wastewater and pharmaceutical formulations, respectively. CONCLUSION: According to International Council for Harmonisation (ICH) guidelines, a forced degradation study of EBS was evaluated, including acid, base hydrolysis, and oxidative hydrolysis using hydrogen peroxide and photolytic and thermal degradation. The highest degradation was achieved by acid hydrolysis. The safety and efficacy of EBS were evaluated via a safety comparative profile study.

Quantitation of native and forced degraded collagens by capillary zone electrophoresis: Method development and validation.

A new capillary zone electrophoresis method for collagen quantitation was developed and validated according to the International Council for Harmonization guideline Q2 (R1). The Sircol collagen assay and ultraviolet spectrometry were employed as reference methods. Capillary zone electrophoresis enables specific, simple, and fast determination within 9 min. It is less user-dependent and more automated than the Sircol collagen assay. With a limit of detection of 18.0 µg/mL, the new method is less sensitive than the Sircol collagen assay, which has a limit of detection of 6.5 µg/mL. Nonetheless, capillary zone electrophoresis covers a wider linearity range (50-400 µg/mL) compared to the Sircol collagen assay (5-80 µg/mL), with similar precision. Additional advantages of capillary zone electrophoresis are the ability to gain information on collagen integrity and to simultaneously determine native and denatured collagens. This approach represents a modern and legitimate alternative to the Sircol collagen assay. The developed method has been successfully applied to the study of three collagen products and samples from forced degradation.

Development, stability-indicating assessment, and evaluation of influential method conditions using a full factorial design for the determination of Nintedanib esylate-related impurities.

The design of an appropriate analytical method for assessing the quality of pharmaceuticals requires a deep understanding of science, and risk evaluation approaches are appreciated. The current study discusses how a related substance method was developed for Nintedanib esylate. The best possible separation between the critical peak pairs was achieved using an X-Select charged surface hybrid Phenyl Hexyl (150 × 4.6) mm, 3.5 µm column. A mixture of water, acetonitrile, and methanol in mobile phase-A (70:20:10) and mobile phase-B (20:70:10), with 0.1% trifluoroacetic acid and 0.05% formic acid in both eluents. The set flow rate, wavelength, and injection volumes were 1.0 ml/min, 285 nm, and 5 µl, respectively, with gradient elution. The method conditions were validated as per regulatory requirements and United States Pharmacopeia general chapter < 1225 >. The correlation coefficient for all impurities from the linearity experiment was found to be > 0.999. The % relative standard deviation from the precision experiments ranged from 0.4 to 3.6. The mean %recovery from the accuracy study ranged from 92.5 to 106.5. Demonstrated the power of the stability-indicating method through degradation studies; the active drug component is more vulnerable to oxidation than other conditions. Final method conditions were further evaluated using a full-factorial design. The robust method conditions were identified using the graphical optimization from the design space.

Validation of stability-indicating LC method, degradation study, and impact on antioxidant and antifungal activities of Eugenia uniflora leaves extract.

The aim of this study is to demonstrate the stability-indicating capacity of an analytical method for Eugenia uniflora, enhance understanding of the stability of myricitrin, and assess the effect of degradation of spray-dried extract (SDE) on antioxidant and antifungal activities. Validation of the stability-indicating method was carried out through a forced degradation study of SDE and standard myricitrin. The antioxidant and antifungal activities of SDE were evaluated both before and after degradation. The quantification method described was found to be both accurate and precise in measuring myricitrin levels in SDE from E. uniflora, with excellent selectivity that confirmed its stability-indicating capability. The forced degradation study revealed that the marker myricitrin is sensitive to hydrolysis, but generally stable under other stress conditions. By contrast, the standard myricitrin displayed greater susceptibility to degradation under forced degradation conditions. Analysis of the antioxidant activity of SDE before and after degradation showed a negative impact in this activity due to degradation, while no significant effect was observed on antifungal activity. The method described can be a valuable tool in the quality control of E. uniflora, and the findings can assist in determining the optimal conditions and storage of products derived from this species.

Development of stability-indicating method for separation and characterization of benidipine forced degradation products using LC-MS/MS.

The present study describes forced degradation of benidipine (BEN) as per  Q1A (R2) and Q1B guidelines of the International Council for Harmonisation of Technical Requirements for Pharmaceuticals for Human Use. BEN degraded under hydrolysis (neutral, acidic, and alkaline), hydrogen peroxide induced oxidation, and UV light mediated photolytic degradation. A total of 14 degradation products (DPs) were found in all degradation studies, comprising 4 hydrolytic DPs, 8 oxidative DPs, and 4 photolytic DPs. A selective stability-indicating method was developed using an XBridge BEH C18 column with gradient elution program consisting of ammonium acetate (10 mM, 4.8 pH, acetic acid) and acetonitrile. The flow rate was maintained at 1 ml min-1 . All DPs were separated well using the developed HPLC method and were characterized using LC-MS/MS data. As this method is effective in identifying and separating BEN and its DPs with sufficient resolution, it can be used in laboratories for quality control of drugs in daily routine analysis and stability studies.

Chromatographic separation of tiropramide hydrochloride and its degradation products along with their structural characterization using liquid chromatography quadrupole time-of-flight tandem mass spectrometry and nuclear magnetic resonance.

Tiropramide HCl, a widely used antispasmodic drug, was subjected to various stress conditions (hydrolytic, oxidative, photolytic and thermal) per International Council for Harmonization guidelines in the present work. However, there were no comprehensive degradation studies reported on the drug. Therefore, forced degradation studies of tiropramide HCl were carried out to establish the degradation profile and the storage conditions to maintain its quality attributes during the shelf life and usage. A selective HPLC method was developed to separate the drug and its degradation products (DPs) using Agilent C18 column (250 × 4.6 mm; 5 µm). The mobile phase of 10 mM ammonium formate at pH 3.6 (solvent A) and methanol (solvent B) with gradient elution at a flow rate of 1.00 ml/min was used. Tiropramide was found to be susceptible to acidic and basic hydrolytic exposures as well as oxidative stress conditions in the solution state. This drug was found to be stable under neutral, thermal and photolytic conditions in both solutions and the solid state. Five DPs were detected under different stress conditions. The mass spectrometric fragmentation pattern of tiropramide and its DPs was extensively studied using liquid chromatography quadrupole time-of-flight tandem mass spectrometry for their structural characterization. The position of the oxygen atom in the N-oxide DP was confirmed by NMR studies. The knowledge gained by these studies was used to predict drug degradation profiles, which help analyse any impurities in the dosage form.

Quality by design-steered development and validation of analytical and bioanalytical methods for raloxifene: Application of Monte Carlo simulations and variance inflation factor.

A sensitive, rapid, reproducible, and economical HPLC method is reported for the quantification of raloxifene hydrochloride employing Quality by Design (QbD) principles. Factor screening studies, employing Taguchi design, indicated buffer volume percentage and isocratic flow rate as the critical method parameters (CMPs), which significantly influence the chosen critical analytical attributes, that is, tailing factor and theoretical plate number. Method conditions were subsequently optimized using face-centered cubic design with magnitude of variance inflation factor for assessing multicollinearity among CMPs. Method operable design region (MODR) was earmarked and liquid chromatographic separation optimized using 0.05 M citrate buffer, acetonitrile, and methanol (57:40:3 v/v/v) as ggmobile phase at 0.9 mL min-1 flow rate, λmax of 280 nm, and column temperature of 40°C. Validation of the developed analytical method was accomplished as per International Council on Harmonization (ICH) guidelines confirming high levels of linearity, precision, accuracy, robustness, and sensitivity. Application of Monte Carlo simulations enabled the attainment of best plausible chromatographic resolution and corroboration of the demarcated MODR. Establishment and validation of the bioanalytical method using rat plasma samples, along with forced degradation and stability studies, corroborated the aptness of developed HPLC methods for drug quantification in the biological fluids, as well as in bulk and marketed dosage forms.

Stability-indicating method development and validation for quantitative estimation of organic impurities of the antidiabetic drug glipizide in drug substance and pharmaceutical dosage form using HPLC.

Glipizide is an antidiabetic drug used for the treatment of type 2 diabetes. A simple, reliable and robust reverse-phase liquid chromatographic method (RP-HPLC) was developed and validated as per International Conference on Harmonization Q2(R1) for estimating the impurities of glipizide in pharmaceutical formulations. The chromatographic separation was carried out on a Phenomenex Luna C18 (2), 250 × 4.6 mm, 5 µm with a binary solvent delivery system [MP-A, a homogenous mixture of water and acetonitrile in a ratio of 90:10 (v/v) and 1 ml of orthophosphoric acid; and MP-B, a homogenous mixture of water and acetonitrile in a ratio of 10:90 (v/v) and 1 ml of orthophosphoric acid] with a detection wavelength of 225 nm, a column temperature of 30°C, a flow rate of 1.5 ml/min, and an injection volume of 20 µl. All process, degradant and unknown impurities were separated well with a resolution >2.2 and were estimated accurately without any interference. The recovered values and regression values were 98.7-100.5% and R2 > 0.9999, respectively. The recovery and linearity studies covered the quantitation limit to 150% of the specification limit. The stability-indicating properties of the developed RP-HPLC method was assessed from the forced degradation studies. The developed method was successfully applied for real-time sample analysis of the glipizide dosage form.

Stability-indicating method development and validation for quantitative estimation of assay and organic impurities of antiviral drug baloxavir marboxil in drug substance and pharmaceutical dosage form using HPLC and LC-MS methods.

Baloxavir marboxil (BXM) is a polymerase acidic endonuclease inhibitor used as an antiviral drug. A simple, reliable, and robust liquid chromatographic method was developed and validated per International Council for Harmonisation of Technical Requirements for Pharmaceuticals for Human Use (ICH) Q2(R1) for estimating the assay and impurities of BXM in drug substance and pharmaceutical formulations. The chromatographic separation was carried out on C18 (100 × 4.6 mm, 5 µm) with binary solvent delivery system (A:0.1% trifluoroacetic acid in water; B:0.1% trifluoroacetic-acid in acetonitrile) along with detection wavelength of 260 nm, column temperature of 57°C, flow of 1.2 mL/min and injection volume of 10 µL. All five known impurities and unknown impurities were separated well with resolution >1.7 and were estimated accurately without any interference. Recovered values and regression value were 99.5%-101.2% and R2  > 0.999, respectively. The recovery and linearity studies covered from 50% to 150% for assay, and quantitation limit, 120% for five BXM impurities. Stability-indicating property of the HPLC developed method was assessed from the forced degradation studies. The mass spectral data of unknown impurity formed under oxidation stress condition were discussed. The developed method was also successfully utilized for stability sample analysis of drug substance and tablet dosage form.

Biological Assay to Determine Gonadotropin Potency: From In Vivo to In Vitro Sustainable Method.

Various preparations of follicle-stimulating hormone (FSH) are commercially available; however, they differ in glycoforms composition and purity owing to their respective sources. Additional chemical/physical changes can also be introduced during manufacturing and can impact their biological activity (biopotency), which is routinely assessed using an in vivo bioassay (Steelman-Pohley). This study aimed to determine whether an in vitro bioassay could assess biopotency by distinguishing between r-hFSH chemical/physical variants with similar ability to the in vivo bioassay. The specific activity (units of biological activity per mg of product) of variants of r-hFSH generated through enrichment (acidic/basic), stress (oxidative/acidic pH) and enzymatic treatment (desialylation and desialylation/degalactosylation) was compared using the in vivo and in vitro bioassays. The in vitro bioassay reliably detected potential chemical/physical modifications in r-hFSH variants that may impact biopotency. Overall, the methods demonstrated a comparable ability to detect changes in specific activities due to chemical/physical differences in r-hFSH variants. These data indicate that the in vitro bioassay is suitable to replace the in vivo bioassay.

Simultaneous determination of emtricitabine, tenofovir alafenamide fumarate and dolutegravir sodium by validated stability-indicating RP-HPLC-DAD method.

OBJECTIVE: The purpose of this research was to develop and validate a stability-indicating RP-HPLC technique for simultaneous quantification of Emtricitabine (EMT), Tenofovir Alafenamide Fumarate (TEN), and Dolutegravir Sodium (DOL) in bulk and in their combined formulation. MATERIAL AND METHODS: The developed approach was done on Exterra C18 column (150×4.6mm, 5µm) and Methanol and Buffer (comprising 0.1 (v/v) of Triethylamine and o-phosphoric acid in water, pH 2.6) as mobile phase in the proportion of 75:25 (v/v), eluted at 1mL/min. The analytes were quantified using DAD detector at 265nm. RESULTS: The approach was validated in accordance with the ICH guidelines. Linearity, precision, accuracy, specificity, Limit of Detection (LOD), Limit of Quantitation (LOQ), and robustness were used to validate the proposed method. Linear response was found in the range of 500-1500µg/mL for EMT, 62.5-187.5µg/mL for TEN and 125-375µg/mL for DOL. The LOD values of EMT, TEN and DOL were found 91.78µg/mL, 10.47µg/mL and 19.28µg/mL correspondingly. The LOQ values of EMT, TEN and DOL were found and 278.11µg/mL, 31.74µg/mL and 58.42µg/mL correspondingly. The assay outcomes for all drugs were observed between 99.11-100.84%. To access the method's stability indicating capabilities, the drugs were exposed to various environmental (acid, alkaline, neutral, oxidative, photolytic and thermal) conditions. CONCLUSION: The established approach was considered to be accurate, linear, precise, specific, robust and it can be utilized to analyse the drugs mentioned in its tablet.

Identification, isolation, and structural characterization of novel forced degradation products of apixaban using advanced analytical techniques.

The current research explains the stress degradation behavior of Apixaban, which is an anticoagulant or blood thinner. The degradation was conducted using hydrolytic, oxidative, thermal, and photolytic conditions. Apixaban is relatively stable in oxidative, thermal, and photolytic conditions; however, considerable degradation was observed in acid and base hydrolysis. Degradation products were identified using ultra-high performance liquid chromatography-mass spectrometry, isolated using semi-preparative high-performance liquid chromatography, and structural characterization by high-resolution mass spectrometry and nuclear magnetic resonance spectroscopy. A total of five degradation products were identified and isolated in acid and base degradation. Degradation products 1, 2, and 3 were observed in acid conditions, whereas in base conditions, along with those three, two more degradation products 4 and 5 were identified. The representative thing was that among the five degradation products, two sets of positional isomers 1, 4, and 2, 5 were observed; out of which 2 and 5 are novel. The remaining degradation products 1, 3, and 4 are already reported tentatively using a single analytical technique of mass analysis without any evidence from nuclear magnetic resonance spectroscopy. Hence, the present study focused on using high-resolution mass, and nuclear magnetic resonance spectroscopy data for concrete confirmation of structures for degradation products.

HPLC-PDA identification and resolution of rufinamide forced degradation impurities: A congregated chemometric expedite optimization coupled with factorials and desirability.

Rufinamide is used presently to treat Lenaux-Gastaut syndrome. A full factorial design and desirability approach was investigated for the optimization of hydrolytic stress via response surface curves (RSCs). The degradation impurities were identified and resolved using reversed-phase high-performance liquid chromatography (RP-HPLC) on the Qualisil® BDS C8 column. Acetonitrile-water (29:71, v/v) was optimized for the mobile phase and used at a flow rate of 1.0 ml/min with detection at a wavelength of 230 nm. Rufinamide showed appreciable susceptibility to hydrolysis under acidic and alkaline stress, and substantial degradation in the neutral condition. It degraded much less under oxidative stress. Exposure towards thermal and photolytic stress conditions indicated appreciable stability. The developed method was subjected to validation as per the recommendations of the International Conference on Harmonization. The proposed method showed no influence from the excipients and the degradation products. As well as good precision and accuracy in determination, the method showed a linear response between 2 and 12 µg ml-1 . The method was extended for determination in a human plasma sample, which resulted in excellent recovery without interference from matrix effects. The combined use of desirability and design for the optimization of acidic and alkaline hydrolytic stress led to simple and rapid analysis.

Development of stabilized fuzapladib solution for injection: forced degradation study and pharmacokinetic evaluation.

The aim of the present study was to develop and evaluate stabilized injection solutions of fuzapladib sodium hydrate using antioxidants as the stabilizers. To estimate the possible degradation factors and pathways of fuzapladib, forced degradation studies were conducted under thermal, acid, base, oxidative, and light conditions. To select an optimal excipient to stabilize fuzapladib under a solution state, a screening study of antioxidants was carried out to evaluate their effects to inhibit the degradation. The influence of the selected stabilizers on its pharmacokinetic behavior was evaluated in rats after intravenous administration. On the basis of data from the forced degradation study, thermal and oxidative stresses were significant factors accelerating the degradation of fuzapladib. Among eight tested antioxidants, vitamin C (VC) was the most effective stabilizer to suppress the accelerated degradation by heating, as evidenced by 45% inhibition of the degradation. The stabilization effect was enhanced depending on the concentration of VC. After the intravenous administration of fuzapladib (0.5 mg/kg) with or without VC (2.1 mg/kg), there were no significant differences between the pharmacokinetic behaviors of each group. From these findings, VC might be a promising excipient to stabilize the injection solution of fuzapladib without significant influence on its pharmacokinetic behavior.