Purification and characterization of recombinant human superoxide dismutase integrated with resilin-like polypeptide.

Human superoxide dismutase (hSOD1) plays an important role in the aerobic metabolism and free radical eliminating process in the body. However, the production of existing SOD faces problems such as complex purification methods, high costs, and poor product stability. This experiment achieved low-cost, rapid, and simple purification of hSOD1 through ammonium sulfate precipitation method and heat resistance of recombinant protein. We constructed a recombinant protein hSOD1-LR containing a resilin-like polypeptide tag and expressed it. The interest protein was purified by ammonium sulfate precipitation method, and the results showed that the purification effect of 1.5 M (NH4)2SO4 was the best, with an enzyme activity recovery rate of 80 % after purification. Then, based on its thermal stability, further purification of the interest protein at 60 °C revealed a purification fold of up to 24 folds, and the purification effect was similar to that of hSOD1-6xHis purified by nickel column affinity chromatography. The stability of hSOD1-LR showed that the recombinant protein hSOD1-LR has better stability than hSOD-6xHis. hSOD1-LR can maintain 76.57 % activity even after 150 min of reaction at 70 °C. At same time, hSOD1-LR had activity close to 80 % at pH < 5, indicating good acid resistance. In addition, after 28 days of storage at 4 °C and 40 °C, hSOD1-LR retained 92 % and 87 % activity, respectively. Therefore, the method of purifying hSOD1-LR through salt precipitation may have positive implications for the study of SOD purification.

Simple production of resilin-like protein hydrogels using the Brevibacillus secretory expression system and column-free purification.

Resilin, an insect structural protein, has excellent flexibility, photocrosslinking properties, and temperature responsiveness. Recombinant resilin-like proteins (RLPs) can be fabricated into three-dimensional (3D) structures for use as cell culture substrates and highly elastic materials. A simplified, high-yielding production process for RLPs is required for their widespread application. This study proposes a simple production process combining extracellular expression using Brevibacillus choshinensis (B. choshinensis) and rapid column-free purification. Extracellular production was tested using four representative signal peptides; B. choshinensis was found to efficiently secrete Rec1, an RLP derived from Drosophila melanogaster, regardless of the type of signal peptide. However, it was suggested that Rec1 is altered by an increase in the pH of the culture medium associated with prolonged incubation. Production in a jar fermentor with controllable pH yielded 530 mg Rec1 per liter of culture medium, which is superior to productivity using other hosts. The secreted Rec1 was purified from the culture supernatant via (NH4 )2 SO4 and ethanol precipitations, and the purified Rec1 was applied to ring-shaped 3D hydrogels. These results indicate that the combination of secretory production using B. choshinensis and column-free purification can accelerate the further application of RLPs.

On latches in biological systems: a comparative morphological and functional study of the retinaculum and the dens lock in Collembola.

BACKGROUND: Springtails have the ability to jump using morphological structures consisting of a catapult, the furca, and a latching system constructed with interaction of the retinaculum and the dens lock. The retinaculum engages in the furca at the dens lock in order to form a spring mechanism. They exhibit diversified morphological traits that serve as adaptations to a variety of terrestrial strata and aquatic surface environments. This comparative morphofunctional study centered on the retinaculum and the furcular region of the dens lock aims to describe the morphological variation between taxa and provide insights into the functional dynamics of the latching mechanism at work in the jumping apparatus. Using SEM, µCT and cLSM, we compared representatives of Collembola taxa, Poduromorpha (Neanura muscorum and Podura aquatica), Symphypleona (Dicyrtomina ornata) and Neelipleona (Megalothorax minimus), and examined extracts of the environment in which they were collected. RESULTS: A retinaculum is absent in N. muscorum, although vestigial muscles were found. Abdominal musculature varies significantly, being more abundant in springtails with clear segmentation (N. muscorum and P. aquatica), and reduced in springtails with fused segmentation (D. ornata and M. minimus). The M.a-ret varies as regards architecture and point of connection with the ramus, which is lateral in P. aquatica and median in the other species studied. The number of teeth in the retinaculum ramus also varies between three in M. minimus and four in the other species. The dens lock of all species studied has two locks and two furrows. CONCLUSIONS: The retinaculum and dens lock interact in a key-lock relationship. The latching and unlatching mechanism from the retinaculum and dens lock appear to be similar in all the taxa examined, occurring by muscle force. This leads us to question the hypothesis that hemolymph pressure may be a force generator in jumping. We offer a reconstruction of the ground pattern of the retinaculum and dens lock and, in addition, an explanation of their functioning and the interaction between them. Finally, we frame the interaction between the retinaculum and the dens lock as a latch in a biological system, a mechanism which functions by force of physical contact.

Genetic Fusion of Thermoresponsive Polypeptides with UCST-type Behavior Mediates 1D Assembly of Coiled-Coil Bundlemers.

Thermoresponsive resilin-like polypeptides (RLPs) of various lengths were genetically fused to two different computationally designed coiled coil-forming peptides with distinct thermal stability, to develop new strategies to assemble coiled coil peptides via temperature-triggered phase separation of the RLP units. Their successful production in bacterial expression hosts was verified via gel electrophoresis, mass spectrometry, and amino acid analysis. Circular dichroism (CD) spectroscopy, ultraviolet-visible (UV/Vis) turbidimetry, and dynamic light scattering (DLS) measurements confirmed the stability of the coiled coils and showed that the thermosensitive phase behavior of the RLPs was preserved in the genetically fused hybrid polypeptides. Cryogenic-transmission electron microscopy and coarse-grained modeling revealed that functionalizing the coiled coils with thermoresponsive RLPs leads to their thermally triggered noncovalent assembly into nanofibrillar assemblies.

Emergence of Elastic Properties in a Minimalist Resilin-Derived Heptapeptide upon Bromination.

Bromination is herein exploited to promote the emergence of elastic behavior in a short peptide-SDSYGAP-derived from resilin, a rubber-like protein exerting its role in the jumping and flight systems of insects. Elastic and resilient hydrogels are obtained, which also show self-healing behavior, thanks to the promoted non-covalent interactions that limit deformations and contribute to the structural recovery of the peptide-based hydrogel. In particular, halogen bonds may stabilize the ß-sheet organization working as non-covalent cross-links between nearby peptide strands. Importantly, the unmodified peptide (i.e., wild type) does not show such properties. Thus, SDSY(3,5-Br)GAP is a novel minimalist peptide elastomer.

On springtails (Hexapoda: Collembola): a morphofunctional study of the jumping apparatus.

BACKGROUND: Springtails (Hexapoda: Collembola) are tiny organisms that lead a hidden life, mostly occuring deep in the soil and on leaf litter. They have a variety of interesting body morphology patterns, the most famous of which is the catapult-like structure that enables them to jump and flee from predators. This highly specialized jumping apparatus consists of a mobile furca, which when at rest fits into a trigger, "the retinaculum" on the ventral side of the abdomen. Despite the many studies that have attempted to investigate the jumping apparatus, the actual mechanisms involved in the jump, for example the way in which the furca is released by the retinaculum, how and where the mechanisms of spring and hydrostatic pressure originate, are still not properly understood. The morphology of the jumping apparatus of Orchesella cincta was investigated in detail using confocal laser scanning microscopy and MicroCT techniques for 3D reconstruction. RESULTS: The morphology of O. cincta with both flexed and extended furca is analysed and described. The abdominal musculature involved in the jumping mechanism and relevant structures of the exoskeleton of retinaculum and furca are described in detail. With the data obtained in this study, hypotheses can be made about (1) where and how the spring and hydrostatic pressure mechanisms originate; (2) which muscles act on the extension and flexion of the furca; (3) which muscles act on the retinaculum and (4) how the retinaculum is released from the furca. CONCLUSIONS: The comparative morphological study proved informative, and shows how springtail jumping involves mechanisms unique to this taxon. Hydrostatic pressure regulation possibly varies between animals with distinct segmentation, and those with fused segmentation. Interesting cuticular characters were revealed, such as basal plates and sclerites related to the construction of the spring mechanism. The present study establishes itself as a model option for future morphofunctional studies on springtail's jumping. Analysis of videos and images using a high speed camera will be useful for understanding how the jump develops through take-off, aerial and landing phases.

Resilin is needed for wing posture in Drosophila suzukii.

Resilin is a protein matrix in movable regions of the cuticle conferring resistance to fatigue. The main component of Resilin is Pro-Rresilin that polymerises via covalent di- and tri-tyrosine bounds (DT). Loss of Pro-Resilin is nonlethal and causes a held-down wing phenotype (hdw) in the fruit fly Drosophila melanogaster. To test whether this mild phenotype is recurrent in other insect species, we analysed resilin in the spotted-wing fruit fly Drosophila suzukii. As quantified by DT autofluorescence by microscopy, DT intensities in the trochanter and the wing hinge are higher in D. suzukii than in D. melanogaster, while in the proboscis the DT signal is stronger in D. melanogaster compared to D. suzukii. To study the function of Pro-Resilin in D. suzukii, we generated a mutation in the proresilin gene applying the Crispr/Cas9 technique. D. suzukii pro-resilin mutant flies are flight-less and show a hdw phenotype resembling respective D. melanogaster mutants. DT signal intensity at the wing hinge is reduced but not eliminated in D. suzukii hdw flies. Either residual Pro-Resilin accounts for the remaining DT signal or, as proposed for the hdw phenotype in D. melanogaster, other DT forming proteins might be present in Resilin matrices. Interestingly, DT signal intensity reduction rates in D. suzukii and D. melanogaster are somehow different. Taken together, in general, the function of Pro-Resilin seems to be conserved in the Drosophila genus; small differences in DT quantity, however, allow us to hypothesise that Resilin matrices might be modulated during evolution probably to accommodate the species-specific lifestyle.

The Bright Side of the Tiger: Autofluorescence Patterns in Aedes albopictus (Diptera, Culicidae) Male and Female Mosquitoes.

Light-based events in insects deserve increasing attention for various reasons. Besides their roles in inter- and intra-specific visual communication, with biological, ecological and taxonomical implications, optical properties are also promising tools for the monitoring of insect pests and disease vectors. Among these is the Asian tiger mosquito, Aedes albopictus, a global arbovirus vector. Here we have focused on the autofluorescence characterization of Ae. albopictus adults using a combined imaging and spectrofluorometric approach. Imaging has evidenced that autofluorescence rises from specific body compartments, such as the head appendages, and the abdominal and leg scales. Spectrofluorometry has demonstrated that emission consists of a main band in the 410-600 nm region. The changes in the maximum peak position, between 430 nm and 500 nm, and in the spectral width, dependent on the target structure, indicate the presence, at variable degrees, of different fluorophores, likely resilin, chitin and melanins. The aim of this work has been to provide initial evidence on the so far largely unexplored autofluorescence of Ae. albopictus, to furnish new perspectives for the set-up of species- and sex-specific investigation of biological functions as well as of strategies for in-flight direct detection and surveillance of mosquito vectors.

Autofluorescent Biomolecules in Diptera: From Structure to Metabolism and Behavior.

Light-based phenomena in insects have long attracted researchers' attention. Surface color distribution patterns are commonly used for taxonomical purposes, while optically-active structures from Coleoptera cuticle or Lepidoptera wings have inspired technological applications, such as biosensors and energy accumulation devices. In Diptera, besides optically-based phenomena, biomolecules able to fluoresce can act as markers of bio-metabolic, structural and behavioral features. Resilin or chitinous compounds, with their respective blue or green-to-red autofluorescence (AF), are commonly related to biomechanical and structural properties, helpful to clarify the mechanisms underlying substrate adhesion of ectoparasites' leg appendages, or the antennal abilities in tuning sound detection. Metarhodopsin, a red fluorescing photoproduct of rhodopsin, allows to investigate visual mechanisms, whereas NAD(P)H and flavins, commonly relatable to energy metabolism, favor the investigation of sperm vitality. Lipofuscins are AF biomarkers of aging, as well as pteridines, which, similarly to kynurenines, are also exploited in metabolic investigations. Beside the knowledge available in Drosophila melanogaster, a widely used model to study also human disorder and disease mechanisms, here we review optically-based studies in other dipteran species, including mosquitoes and fruit flies, discussing future perspectives for targeted studies with various practical applications, including pest and vector control.

Resilin matrix distribution, variability and function in Drosophila.

BACKGROUND: Elasticity prevents fatigue of tissues that are extensively and repeatedly deformed. Resilin is a resilient and elastic extracellular protein matrix in joints and hinges of insects. For its mechanical properties, Resilin is extensively analysed and applied in biomaterial and biomedical sciences. However, there is only indirect evidence for Resilin distribution and function in an insect. Commonly, the presence of dityrosines that covalently link Resilin protein monomers (Pro-Resilin), which are responsible for its mechanical properties and fluoresce upon UV excitation, has been considered to reflect Resilin incidence. RESULTS: Using a GFP-tagged Resilin version, we directly identify Resilin in pliable regions of the Drosophila body, some of which were not described before. Interestingly, the amounts of dityrosines are not proportional to the amounts of Resilin in different areas of the fly body, arguing that the mechanical properties of Resilin matrices vary according to their need. For a functional analysis of Resilin matrices, applying the RNA interference and Crispr/Cas9 techniques, we generated flies with reduced or eliminated Resilin function, respectively. We find that these flies are flightless but capable of locomotion and viable suggesting that other proteins may partially compensate for Resilin function. Indeed, localizations of the potentially elastic protein Cpr56F and Resilin occasionally coincide. CONCLUSIONS: Thus, Resilin-matrices are composite in the way that varying amounts of different elastic proteins and dityrosinylation define material properties. Understanding the biology of Resilin will have an impact on Resilin-based biomaterial and biomedical sciences.

Avidity and Cell Uptake of Integrin-Targeting Polypeptide Micelles is Strongly Shape-Dependent.

We describe a genetically encoded micelle for targeted delivery consisting of a diblock polypeptide with segments derived from repetitive protein motifs inspired by Drosophila melanogaster Rec-1 resilin and human tropoelastin with a C-terminal fusion of an integrin-targeting fibronectin type III domain. By systematically varying the weight fraction of the hydrophilic elastin-like polypeptide (ELP) block and molecular weight of the diblock polypeptide, we designed micelles of different morphologies that modulate the binding avidity of the human wild-type 10th fibronectin domain (Fn3) as a function of shape. We show that wormlike micelles that present the Fn3 domain have a 1000-fold greater avidity for the αvß3 receptor compared to the monomer ligand and an avidity that is greater than a clinically relevant antibody that is driven by their multivalency. The amplified avidity of these micelles leads to significantly increased cellular internalization, a feature that may have utility for the intracellular delivery of drugs that are loaded into the core of these micelles.

Mechanical and optical properties of the femoral chordotonal organ in beetles (Coleoptera).

The femoral chordotonal organ (FCO) in beetles differs from that in orthopterids in the origin of its apodeme: it originates directly from the tibia in the latter, but amidst the tendon of the extensor muscle in the former. In many beetles, the apodeme pops up from the tendon as a short sclerite (arculum). It turns distally upon bending of the tibia. The turn of the arculum is several times more than the turn of the tibia, and the arculum is connected to the FCO. This system behaves as a high-pass filter with a time constant close to the step period. Various aspects of the arculum have been studied previously, including its shape in various taxa, its biomechanics, matched neural activity in the FCO, as well as evolutionary aspects. The results of previous studies, published in 1985-2003 in Russian, are inaccessible to most foreign readers. However, original texts and the list of studied species (>350) are now available online. Recently, we minimized the system to three components: the proximal tibial ledge, the tendon and the arculum. The elastic tendon contains resilin. In four model species, the arculum readily turned upon stretching of the tendon. Turning was video recorded. The force of approximately 0.005 N, applied to a tendon approximately 0.25 mm in size, is enough for the utmost turn of the arculum. The arculum turned also upon local deformations close to its base. The ability to turn vanished after incision between the arculum and the distal part of the extensor apodeme. A mechanical model of an amplifier is proposed. The apodeme includes optically active structures, which behave differently in polarized light.

Evidence for a sexually selected function of the attachment system in bedbugs Cimex lectularius (Heteroptera, Cimicidae).

Attachment to surfaces is a major aspect of an animal's interaction with the environment. Consequently, shaping of the attachment system in relation to weight load and substrate is considered to have occurred mainly by natural selection. However, sexual selection may also be important because many animals attach to their partner during mating. The two hypotheses generate opposing predictions in species where males are smaller than females. Natural selection predicts that attachment ability will scale positively with load, and hence body size, and so will be larger in females than males. Sexual selection predicts attachment forces in males will be larger than those in females, despite the males' smaller size because males benefit from uninterrupted copulation by stronger attachment to the female. We tested these predictions in the common bedbug Cimex lectularius, a species in which both sexes, as well as nymphs, regularly carry large loads: blood meals of up to 3 times their body weight. By measuring attachment forces to smooth surfaces and analysing in situ fixed copulating pairs and the morphology of attachment devices, we show that: (i) males generate twice the attachment force of females, despite weighing 15% less; (ii) males adhere to females during copulation using hairy tibial adhesive pads; (iii) there are more setae, and more setae per unit area, in the pads of males than in those of females but there is no difference in the shape of the tarsal setae; and (iv) there is an absence of hairy tibial attachment pads and a low attachment force in nymphs. These results are consistent with a sexually selected function of attachment in bedbugs. Controlling sperm transfer and mate guarding by attaching to females during copulation may also shape the evolution of male attachment structures in other species. More generally, we hypothesise the existence of an arms race in terms of male attachment structures and female counterparts to impede attachment, which may result in a similar evolutionary diversification to male genitalia.

Rational design of new materials using recombinant structural proteins: Current state and future challenges.

Sequence-definable polymers are seen as a prerequisite for design of future materials, with many polymer scientists regarding such polymers as the holy grail of polymer science. Recombinant proteins are sequence-defined polymers. Proteins are dictated by DNA templates and therefore the sequence of amino acids in a protein is defined, and molecular biology provides tools that allow redesign of the DNA as required. Despite this advantage, proteins are underrepresented in materials science. In this publication we investigate the advantages and limitations of using proteins as templates for rational design of new materials.

Recombinant Structural Proteins and Their Use in Future Materials.

Recombinant proteins are polymers that offer the materials engineer absolute control over chain length and composition: key attributes required for design of advanced polymeric materials. Through this control, these polymers can be encoded to contain information that enables them to respond as the environment changes. However, despite their promise, protein-based materials are under-represented in materials science. In this chapter we investigate why this is and describe recent efforts to address this. We discuss constraints limiting rational design of structural proteins for advanced materials; advantages and disadvantages of different recombinant expression platforms; and, methods to fabricate proteins into solid-state materials. Finally, we describe the silk proteins used in our laboratory as templates for information-containing polymers.

Resonance frequencies of honeybee (Apis mellifera) wings.

During flight, insect wings bend and twist under the influence of aerodynamic and inertial forces. We tested whether wing resonance of honeybees (Apis mellifera) matches the wingbeat frequency, against the 'stiff element' hypothesis that the wing's first longitudinal mode exceeds the wingbeat frequency. Six bees were immobilized with their right wing pair outspread, and stimulated with a shaker while the normal modes were recorded with a scanning Doppler laser vibrometer. The lowest normal mode of the wings was the first longitudinal bending mode and, at 602±145 Hz, was greater than the wingbeat frequency of 234±13.9 Hz. Higher-order normal modes of the wing tended to incorporate nodal lines in the chordwise direction of the trailing edge, suggesting that their mode shape did not strongly resemble wing deformation during flapping flight. These results support the stiff element hypothesis for Apis mellifera.

Functional morphology of tarsal adhesive pads and attachment ability in ticks Ixodes ricinus (Arachnida, Acari, Ixodidae).

The presence of well-developed, elastic claws on ticks and widely pilose hosts led us to hypothesise that ticks are mostly adapted to attachment and locomotion on rough, strongly corrugated and hairy, felt-like substrates. However, by using a combination of morphological and experimental approaches, we visualised the ultrastructure of attachment devices of Ixodes ricinus and showed that this species adheres more strongly to smooth surfaces than to rough ones. Between paired, elongated, curved, elastic claws, I. ricinus bears a large, flexible, foldable adhesive pad, which represents an adaptation to adhesion on smooth surfaces. Accordingly, ticks attached strongest to glass and to surface profiles similar to those of the human skin, generating safety factors (attachment force relative to body weight) up to 534 (females). Considerably lower attachment force was found on silicone substrates and as a result of thanatosis after jolting.

Type III secretion as a generalizable strategy for the production of full-length biopolymer-forming proteins.

Biopolymer-forming proteins are integral in the development of customizable biomaterials, but recombinant expression of these proteins is challenging. In particular, biopolymer-forming proteins have repetitive, glycine-rich domains and, like many heterologously expressed proteins, are prone to incomplete translation, aggregation, and proteolytic degradation in the production host. This necessitates tailored purification processes to isolate each full-length protein of interest from the truncated forms as well as other contaminating proteins; owing to the repetitive nature of these proteins, the truncated polypeptides can have very similar chemistry to the full-length form and are difficult to separate from the full-length protein. We hypothesized that bacterial expression and secretion would be a promising alternative option for biomaterials-forming proteins, simplifying isolation of the full-length target protein. By using a selective secretion system, truncated forms of the protein are not secreted and thus are not found in the culture harvest. We show that a synthetically upregulated type III secretion system leads to a general increase in secretion titer for each protein that we tested. Moreover, we observe a substantial enhancement in the homogeneity of full-length forms of pro-resilin, tropo-elastin crosslinking domains, and silk proteins produced in this manner, as compared with proteins purified from the cytosol. Secretion via the type III apparatus limits co-purification of truncated forms of the target protein and increases protein purity without extensive purification steps. Demonstrating the utility of such a system, we introduce several modifications to resilin-based peptides and use an un-optimized, single-column process to purify these proteins. The resulting materials are of sufficiently high quantity and yield for the production of antimicrobial hydrogels with highly reproducible rheological properties. The ease of this process and its applicability to an array of engineered biomaterial-forming peptides lend support for the application of bacterial expression and secretion for other proteins that are traditionally difficult to express and isolate from the bacterial cytoplasm. Biotechnol. Bioeng. 2016;113: 2313-2320. © 2015 Wiley Periodicals, Inc.

Jumping mechanisms and performance in beetles. I. Flea beetles (Coleoptera: Chrysomelidae: Alticini).

The present study analyses the anatomy, mechanics and functional morphology of the jumping apparatus, the performance and the kinematics of the natural jump of flea beetles (Coleoptera: Chrysomelidae: Galerucinae: Alticini). The kinematic parameters of the initial phase of the jump were calculated for five species from five genera (average values from minimum to maximum): acceleration 0.91-2.25 (×10(3)) m s(-2), velocity 1.48-2.80 m s(-1), time to take-off 1.35-2.25 ms, kinetic energy 2.43-16.5 µJ, G: -force 93-230. The jumping apparatus is localized in the hind legs and formed by the femur, tibia, femoro-tibial joint, modified metafemoral extensor tendon, extensor ligament, tibial flexor sclerite, and extensor and flexor muscles. The primary role of the metafemoral extensor tendon is seen in the formation of an increased attachment site for the extensor muscles. The rubber-like protein resilin was detected in the extensor ligament, i.e. a short, elastic element connecting the extensor tendon with the tibial base. The calculated specific joint power (max. 0.714 W g(-1)) of the femoro-tibial joint during the jumping movement and the fast full extension of the hind tibia (1-3 ms) suggest that jumping is performed via a catapult mechanism releasing energy that has beforehand been stored in the extensor ligament during its stretching by the extensor muscles. In addition, the morphology of the femoro-tibial joint suggests that the co-contraction of the flexor and the extensor muscles in the femur of the jumping leg is involved in this process.

Wing flexibility improves bumblebee flight stability.

Insect wings do not contain intrinsic musculature to change shape, but rather bend and twist passively during flight. Some insect wings feature flexible joints along their veins that contain patches of resilin, a rubber-like protein. Bumblebee wings exhibit a central resilin joint (1m-cu) that has previously been shown to improve vertical force production during hovering flight. In this study, we artificially stiffened bumblebee (Bombus impatiens) wings in vivo by applying a micro-splint to the 1m-cu joint, and measured the consequences for body stability during forward flight in both laminar and turbulent airflow. In laminar flow, bees with stiffened wings exhibited significantly higher mean rotation rates and standard deviation of orientation about the roll axis. Decreasing the wing's flexibility significantly increased its projected surface area relative to the oncoming airflow, likely increasing the drag force it experienced during particular phases of the wing stroke. We hypothesize that higher drag forces on stiffened wings decrease body stability when the left and right wings encounter different flow conditions. Wing splinting also led to a small increase in body rotation rates in turbulent airflow, but this change was not statistically significant, possibly because bees with stiffened wings changed their flight behavior in turbulent flow. Overall, we found that wing flexibility improves flight stability in bumblebees, adding to the growing appreciation that wing flexibility is not merely an inevitable liability in flapping flight, but can enhance flight performance.