Baseline sLAG-3 levels in Caucasian and African-American breast cancer patients.

BACKGROUND: Worse survival persists for African-Americans (AA) with breast cancer compared to other race/ethnic groups despite recent improvements for all. Unstudied in outcomes disparities to date is soluble LAG-3 (sLAG-3), cleaved from the LAG-3 immune checkpoint receptor which is a proposed target for deactivation in emerging immunotherapies due to its prominent immunosuppressive function in the tumoral microenvironment. A prior study has found that lower sLAG-3 baseline level was associated with poor outcomes. METHODS: In a cross-sectional study of 95 patients with primary breast cancer (n = 58 Caucasian, n = 37 AA), we measured sLAG-3 (ELISA pg/ml) in pre-treatment blood samples using the non-parametric Mann-Whitney u-Test for independent samples, and, calculated Pearson r correlation coefficients of sLAG-3 with circulating cytokines by race. RESULTS: Mean sLAG-3 level was lower in AA compared to Caucasian patients (1377.6 vs 3690.3, P = .002), and in patients with triple-negative breast cancer (TNBC) compared to those with non-TNBC malignancies (P = .02). When patients with TNBC tumors were excluded from analyses, the difference in sLAG-3 level between AA (n = 21) and Caucasian patients (n = 40) substantially remained (1937.4 vs 4182.4, P = .06). Among Caucasian patients, sLAG-3 was correlated with IL-6, IL-8 and IL-10 (r = .69, P < .001; r = .70, P < .001; and, r = .46, P = .01; respectively). For AA patients, sLAG-3 was correlated only with IL-6 (r = .37, P = .03). CONCLUSIONS: We present the first report that African-American breast cancer patients might have comparatively low pre-treatment sLAG-3 levels, independent of TNBC status, along with reduced co-expression with circulating cytokines. The mechanistic and prognostic role of cleaved LAG-3, particularly in disparate outcomes, remains to be elucidated.

Application of various microscopy techniques to study early-age and longer-term behaviour of super sulphated cement microstructure.

Super sulphated cement (SSC) is a very promising substitute for traditional construction materials (i.e. Portland cement), due to its enhanced durability and particularly low environmental impact. This paper explores the microstructure and certain properties of SSC, focusing on the particular complexities of its microstructure and the difficulties of microanalysis of its hydrates. To do so, SSC paste samples were first cast to identify hydration products using X-ray diffraction, then observed at early age using confocal laser scanning microscopy (CLSM) and at early and late age using scanning electron microscopy. In addition, concrete cores impregnated with fluorescein in order to highlight porosity, cracking and aggregates debonding were observed under UV light using optical microscopy (OM), showing a complete absence of cracking and aggregate debonding. Both microscopy techniques (CLSM and UV light OM) have been applied to this type of binder for the first time. The results show that SSC microstructure is characterised by a sophisticated intergrowth of various phases, including ettringite and amorphous calcium-(alumina)-silicate hydrate gels. Finally, Monte-Carlo simulation of electron-matter has been provided for a better understanding of EDS analysis.

Eisenia fetida-driven vermitechnology for the eco-friendly transformation of steel waste slag into organic amendment: An insight through microbial diversity and multi-model approach.

The processing of steel waste slag from the black metallurgical sector seriously threatened the ecology. To counter these dangers, appropriate detoxification methods were required. Vermitechnology was one such strategy that could successfully convert this industrial waste into nutrient-rich products suitable for use in agriculture. This research primarily focuses on employing vermitechnology for the transformation of waste steel slag into vermicompost and to determine changes in microbial composition, nutrient cycling, and metal detoxification facilitated by earthworms (Eisenia fetida). Earthworm populations in steel waste vermibeds (sw-vermibeds) increased by 2.87-3.07 folds. T1(SW + CD-1:1) comparatively showed increased levels of nutrients such as nitrogen, phosphorus, and potassium. Microbial and enzymatic parameters were more pronounced in treatment T1. The findings of phospholipid fatty acid (PLFA) diversity demonstrate microbial diversity and fatty acid composition. Based on PLFA Sobol Sensitivity Analysis (SSA), PUFA and cyclo were the most sensitive inputs to the presence of heavy metal (HMs) concentrations in SW. In accordance with Taylor-based modelling, R-tree, and Mars were the most trusted regression models for predicting HMs toxicity on microbes. The bioavailable metal fractions of HMs (Fe, Ni, Cd, Cu, Pb, and Cr) decreased by 61-83%. The correlation was performed for 0 and 90 days for metal microbial interactions r (0 days), [BSR vs Fe, Cd, Cu, Ni = -0.99, -0.82, -0.43, -0.99] and r (90 days), [FDA vs Fe, Cu, Ni = -0.97, -0.47, -0.95]. Overall, the results indicated that T1(1:1 SW + CD) provided more favorable conditions for the development of microbes and Eisenia fetida. This research presents a new perspective to the world community on the transformation of harmful steel waste slag into advantageous biological resources by introducing a novel method of employing Eisenia fetida to remediate hazardous steel waste slag.

Enhanced activation of peroxymonosulfate for advanced oxidation processes using solid waste: A novel and easy implement high-value utilization process of slag.

A simple, efficient and low energy-consuming process available to generate resultful radicals from PMS for organic pollutants removal had been employed in this study. Slag had been used as the activator for organic pollutants degradation under slag/PMS advanced oxidation process. In this work, effects of slag with or without pretreatment on pollutant removal were studied and radical species generated by slag were measured. Calcination pretreatment is one efficient method to enhance the degradation efficiency significantly. Due to Fe3O4 and Fe2O3 became the dominant phases after calcination, it was about 8.6-flods increasing after comparing the pollutant removal efficiency for different slag/PMS system with calcination pretreatment or not. Organic pollutant neither degraded in PMS system at 25 °C nor being absorbed by slag system for 60 min. On the contrary, up to 90% pollutant concentration reduction achieved in the slag/PMS process. During this process, both •OH and SO4•- had been detected once slag and PMS interaction in wastewater. Through the free radicals quenching tests,•OH should be the key free radical in this advanced oxidation process for the organic pollutant removal under this alkaline condition. In general, organic degradation rate was determined by the slag dosage, and the maximum degradation efficiency was mainly controlled by the PMS usage. This work is expected to broaden the high-value reutilization way for industrial solid waste.

Concurrent removal of Fe(II), Cu(II), and Zn(II) cations from acid mine drainage by an industrial solid waste - steel slag: Behaviors and mechanisms.

Acid mine drainage (AMD) contamination poses a severe environmental threat and is a significant risk to human health. There is an urgent need to develop environmentally sustainable and technically viable solutions for water contamination caused by heavy metals. In this study, steel slag (SS) was used as a secondary resource to concurrently remove Fe(II), Cu(II), and Zn(II) from AMD. Because of the loose and porous structure, abundant functional groups, fast sedimentation velocity, and excellent solid-liquid separation, SS showed exceptional removal performance for heavy metal ions. The adsorption kinetic data of Fe(II), Cu(II), and Zn(II) showed good regression with the pseudo-second-order model. Besides, the adsorption of Fe(II) by SS conformed to the Freundlich model, whereas the adsorption of Cu(II) and Zn(II) followed the Langmuir model, with the maximum adsorption amounts of Cu(II) and Zn(II) being 170.69 and 155.98 mg/g. Furthermore, competitive adsorption was observed among Fe (II), Cu (II), and Zn (II) in a multi-component system, with the adsorption priority being Fe (II) > Cu (II) > Zn (II). The removal mechanism of Fe(II), Cu(II), and Zn(II) in AMD by SS mainly includes electrostatic attraction, chemical precipitation, and surface complexation. Interestingly, the leached concentrations of Fe(II), Cu(II), and Zn(II) from the spent slag after calcination were all within the detection limit of the Chinese emission standard, demonstrating excellent environmental stability. Theoretically, this renders it a viable candidate for use as an additive in construction materials. Meaningfully, the work offers a practical approach for energy-efficient and eco-friendly heavy metal ions adsorption, and the secondary utilization of SS also contributes to the sustainable development of the steel industry. It is beneficial to implement the development concepts of clean production and efficient utilization of industrial solid waste.

Aqueous mineral carbonation of three different industrial steel slags: Absorption capacities and product characterization.

Heavy carbon industries produce solid side stream materials that contain inorganic chemicals like Ca, Na, or Mg, and other metals such as Fe or Al. These inorganic compounds usually react efficiently with CO2 to form stable carbonates. Therefore, using these side streams instead of virgin chemicals to capture CO2 is an appealing approach to reduce CO2 emissions. Herein, we performed an experimental study of the mineral carbonation potential of three industrial steel slags via aqueous, direct carbonation. To this end, we studied the absorption capacities, reaction yields, and physicochemical characteristics of the carbonated samples. The absorption capacities and the reaction yields were analyzed through experiments carried out in a reactor specifically designed to work without external stirring. As for the physicochemical characterization, we used solid-state Fourier Transform Infrared Spectroscopy (FTIR), X-ray diffraction (XRD), and scanning electron microscope (SEM). Using this reactor, the absorption capacities were between 5.8 and 35.3 g/L and reaction yields were in the range of 81-211 kg CO2/ton of slag. The physicochemical characterization of the solid products with solid FTIR, XRD and SEM indicated the presence of CaCO3. This suggests that there is potential to use the carbonated products in commercial applications.

Synthesis of Fe-N doped porous carbon/silicate composites regulated by minerals in coal gasification fine slag for synergistic electrocatalytic treatment of phenolic wastewater.

Coal gasification fine slag (CGFS), as a difficult-to-dispose solid waste in the coal chemical industry, consists of minerals and residual carbon. Due to the aggregate structure of minerals blocking pores and encapsulating active substances, the high-value utilization of CGFS still remains a challenge. Based on the intrinsic characteristics of CGFS, this study synthesized Fe-N doped porous carbon/silicate composites (Fe-NC) by alkali activation and pyrolysis for electrocatalytic degradation of phenolic wastewater. Meanwhile, minerals were utilized to regulate the surface chemical and pore structure, turning their disadvantages into advantages, which caused a sharp increase in m-cresol mineralization. The positive effect of minerals on composite properties was investigated by characterization techniques, electrochemical analyses and density functional theory (DFT) calculations. It was found that the mesoporous structure of the mineral-regulated composites was further developed, with more carbon defects and reactive substances on its surface. Most importantly, silicate mediated iron conversion through strong interaction with H2O2, high work function gradient with electroactive iron, and excellent superoxide radical (•O2-) production capacity. It effectively improved the reversibility and kinetics of the entire electrocatalytic reaction. Within the Fe-NC311 electrocatalytic system, the m-cresol removal rate reached 99.55 ± 1.24%, surpassing most reported Fe-N-doped electrocatalysts. In addition, the adsorption and electrooxidation experiment confirmed that the synergistic effect of Fe-N doped porous carbon and silicate simultaneously promoted the capture of pollutants and the transformation of electroactive molecules, and hence effectively shortened the diffusion path of short-lived radicals, which was further supported by molecular dynamics simulation. Therefore, this research provides new insights into the problem of mineral limitations and opens an innovative approach for CGFS recycling and environmental remediation.

Persulfate activation by nanoscale zero-valent iron supported by modified blast furnace slag for degradation of phenol wastewater.

Nano-zero valent iron (nZVI) was anchored and dispersed on the surface of acid-modified blast furnace slag (mBFS) through the liquid phase reduction method. The synthesized nZVI@mBFS composite exhibited remarkable ability to degrade phenol when used in conjunction with persulfate (PDS), 97.8% phenol could be eliminated in 30 min. All the anions like SO42-, HCO3-, H2PO4-, and CO32- were detrimental to the phenol degradation in nZVI@mBFS system. Moreover, electron paramagnetic resonance (EPR) analysis and radical scavenging tests confirmed that SO4•-, •OH and •O2- were the principal reactive oxygen species (ROSs) generated during the reaction process. The potential degradation pathways were also deduced based on the results obtained from gas chromatograph-mass spectrometer (GC-MS) analysis. Collectively, this study holds substantial significance in regards to recycling industrial solid wastes, devising efficient persulfate-activated materials, and treating wastewater.

Levodopa-induced Dyskinesia in Parkinson's Disease: Plausible Inflammatory and Oxidative Stress Biomarkers.

BACKGROUND: Pathophysiology of levodopa-induced dyskinesia (LID) remains obscure. Increased dopamine metabolism due to prolonged levodopa treatment can exacerbate oxidative damage and neuroinflammatory pathology in Parkinson's disease (PD). Association of novel peripheral markers with LID severity might provide insight into LID pathomechanisms. OBJECTIVE: We aimed to study specific peripheral blood inflammatory-oxidative markers in LID patients and investigate their association with clinical severity of LID. METHOD: Motor, non-motor and cognitive changes in PD with and without LID compared to healthy-matched controls were identified. Within the same cohort, inflammatory marker (sLAG3, TOLLIP, NLRP3 and IL-1ß) levels and antioxidant enzyme activities were determined by ELISA and spectrophotometric methods. RESULTS: LID patients showed distinctly upregulated TOLLIP, IL-1ß levels with significant diminution of antioxidant activity compared to controls. Significant negative association of cognitive markers with oxidative changes was also observed. CONCLUSION: To our understanding, this is the first study that indicates the involvement of toll-like receptor-mediated distinct and low-grade inflammatory activation in LID pathophysiology.

Probabilistic risk assessment of residential exposure to electric arc furnace steel slag using Bayesian model of relative bioavailability and PBPK modeling of manganese.

Electric arc furnace (EAF) slag is a coproduct of steel production used primarily for construction purposes. Some applications of EAF slag result in residential exposures by incidental ingestion and inhalation of airborne dust. To evaluate potential health risks, an EAF slag characterization program was conducted to measure concentrations of metals and leaching potential (including oral bioaccessibility) in 38 EAF slag samples. Arsenic, hexavalent chromium, iron, vanadium, and manganese (Mn) were identified as constituents of interest (COIs). Using a probabilistic risk assessment (PRA) approach, estimated distributions of dose for COIs were assessed, and increased cancer risks and noncancer hazard quotients (HQs) at the 50th and 95th percentiles were calculated. For the residents near slag-covered roads, cancer risk and noncancer HQs were <1E - 6 and 1, respectively. For residential driveway or landscape exposure, at the 95th percentile, cancer risks were 1E - 6 and 7E - 07 based on oral exposure to arsenic and hexavalent chromium, respectively. HQs ranged from 0.07 to 2 with the upper bound due to ingestion of Mn among children. To expand the analysis, a previously published physiologically based pharmacokinetic (PBPK) model was used to estimate Mn levels in the globus pallidus for both exposure scenarios and further evaluate the potential for Mn neurotoxicity. The PBPK model estimated slightly increased Mn in the globus pallidus at the 95th percentile of exposure, but concentrations did not exceed no-observed-adverse-effect levels for neurological effects. Overall, the assessment found that the application of EAF slag in residential areas is unlikely to pose a health hazard or increased cancer risk.

A Water Environment-Based Simulated Method for Ultrasonic Testing of Slag Inclusion Weld Defects Based on Improved VMD.

The identification of slag inclusion defects in welds is of the utmost importance in guaranteeing the integrity, safety, and prolonged service life of welded structures. Most research focuses on different kinds of weld defects, but branch research on categories of slag inclusion material is limited and critical for safeguarding the quality of engineering and the well-being of personnel. To address this issue, we design a simulated method using ultrasonic testing to identify the inclusion of material categories in austenitic stainless steel. It is based on a simulated experiment in a water environment, and six categories of cubic specimens, including four metallic and two non-metallic materials, are selected to simulate the slag materials of the inclusion defects. Variational mode decomposition optimized by particle swarm optimization is employed for ultrasonic signals denoising. Moreover, the phase spectrum of the denoised signal is utilized to extract the phase characteristic of the echo signal from the water-slag specimen interface. The experimental results show that our method has the characteristics of appropriate decomposition and good denoising performance. Compared with famous signal denoising algorithms, the proposed method extracted the lowest number of intrinsic mode functions from the echo signal with the highest signal-to-noise ratio and lowest normalized cross-correlation among all of the comparative algorithms in signal denoising of weld slag inclusion defects. Finally, the phase spectrum can ascertain whether the slag inclusion is a thicker or thinner medium compared with the weld base material based on the half-wave loss existing or not in the echo signal phase.

Influence of the chemical composition of leachates on the results of ecotoxicity tests for different slag types.

In this study, four ecotoxicological tests on Vibrio fischeri bacteria, Sinapis alba L. (white mustard), Daphnia magna S. (daphnia's) and earthworms were performed for three types of aqueous slag (ladle, blast furnace and converter) leachates with two-grain sizes (<4 mm, <10 mm). Concentrations of toxic elements and concentrations of Cr(VI), Ca, Na, Al, and other ions were determined. The raw slags were analyzed using X-ray fluorescence spectroscopy (XRFS), and major substances were determined by X-ray powder diffraction (XRD). The aqueous slag leachates passed ecotoxicological tests and met the required criteria, showing no toxicity to Vibrio fischeri and complying with white mustard test criteria. According to the results of the ecotoxicity tests with daphnia, the blast furnace slag samples were not ecotoxic, while two other slag samples were found to be entirely compliant. Characterization of the slags showed that the effect of element/ion leachability and slag grain size is essential. Biplot principal component analysis (PCA) showed that grain size does not significantly affect the separation of individuals on the plane. A positive correlation on toxicity was found with pH, conductivity, calcium content, dissolved content, salinity and fluoride concentration, whereas a negative correlation was found with magnesium concentration, dissolved organic carbon and potassium concentration. The effective concentration at 50% inhibition (EC50) value for Vibrio fischeri correlated with the first dimension of bivariate assessment. In summary, it was found that the investigated slags can be effectively reused as they comply with regulations and do not endanger the environment.

Application of dirty-acid wastewater treatment technology in non-ferrous metal smelting industry: Retrospect and prospect.

Dirty-acid wastewater (DW) originating from the non-ferrous metal smelting industry is characterized by a high concentration of H2SO4 and As. During the chemical precipitation treatment, a significant volume of arsenic-containing slag is generated, leading to elevated treatment expenses. The imperative to address DW with methods that are cost-effective, highly efficient, and safe is underscored. This paper conducts a comprehensive analysis of three typical methods to DW treatment, encompassing technical principles, industrial application flow charts, research advancements, arsenic residual treatment, and economic considerations. Notably, the sulfide method emerges as a focal point due to its minimal production of arsenic residue and the associated lowest overall treatment costs. Moreover, in response to increasingly stringent environmental protection policies targeting new pollutants and carbon emissions reduction, the paper explores the evolving trends in DW treatment. These trends encompass rare metal and sulfuric acid recycling, cost-effective H2S production methods, and strategies for reducing, safely disposing of, and harnessing resources from arsenic residue.

Exploring the potential of steel slag waste for carbon sequestration through mineral carbonation: A comparative study of blast-furnace slag and ladle slag.

Steel slag is a by-product of steelmaking which has emerged as a potential CO2 sequestration material due to its high reactivity and abundance. This research investigates the use of steel slag waste for the direct capture of carbon from air and its storage through mineral carbonation. Two abundant wastes, blast-furnace slag (BFS) and ladle slag (LS), were tested for their carbon sequestration potential, and the effects of operational parameters such as reaction time between CO2 and slag waste, temperature, liquid-solid ratio, and pressure on CO2 sequestration were determined. Quantitative and qualitative results reveal that much higher CO2 sequestration was achieved using LS compared to BFS after exposure to CO2 for 1 day at room temperature. By increasing the exposure time to four days, levels of CO2 sequestration increased gradually from 2.71% to 4.19% and 23.46%-28.21% for BFS and LS respectively. Increasing the temperature from 20 ± 2 °C to 90 ± 2 °C positively influenced CO2 sequestration in BFS, resulting in an enhancement from 3.45% to 13.21%. However, the impact on LS was insignificant, with sequestration levels rising from 27.72% to 29.90%. Moreover, better CO2 sequestration was observed for BFS than LS when the liquid-to-solid ratio increased from 3:1 to 4:1, whereupon the sequestration potential reached approximately 15% for BFS and 30% for LS at 90 ± 2 °C. Meanwhile, higher pressure reduced the sequestration potential of slag. The results of this study suggest that there is potential for scaling up the process to industrial applications and contributing to the reduction of CO2 emissions in the steelmaking industry.

Fabrication and characterization of ceramic tubular composite membranes using slag waste materials for oily wastewater treatment.

In this study, low-cost tubular ceramic membranes were fabricated by using waste slag and natural raw materials in order to decrease the manufacturing carbon footprints. The effects of incorporation of phosphorus slag (PS) and blast furnace slag (BFS) in the mullite-zeolite membrane body were investigated. The structural characteristics of the fabricated membranes were evaluated using X-ray diffraction (XRD), field emission-scanning electron microscopy (FESEM), atomic force microscopy (AFM), contact angle, porosity and average pore size analyses. Thermal and mechanical stability were studied by thermogravimetric analysis (TGA) and three-point bending test, respectively. The oily wastewater treatment tests revealed that an increase in the slag percentage from 0 to 30% leads to enhancing the permeate flux from 99 l m-2 h-1 to 349 l m-2 h-1 for PS-based tubular membrane and to 244 l m-2 h-1 for BFS-based tubular membrane under 1 bar applied. The chemical oxygen demand (COD) removal percentage of all membranes was reported almost 99% for oily wastewater feed with a COD concentration of 612 mg l-1. In addition, the investigation of membrane fouling mechanisms was carried out using Hermia models indicating that the best correlation with the experimental data is observed for the complete pore blocking model. This study presents experimental foundations aimed at enhancing the performance of affordable slag-based membranes, thus fostering their applicability in engineering contexts.

Calcium carbonate synthesis from Kambara reactor desulphurization slag via indirect carbonation for CO2 capture and utilization.

In this work, industrial Kambara reactor desulphurization slag (KR slag) was indirectly carbonated. The effects of leaching time, leaching temperature, leaching agent types, and leaching agent concentration on the leaching ratio of calcium from KR slag were investigated. Subsequently, precipitated calcium carbonate (PCC) was synthesized by bubbling CO2 gas (flow rate of 15 mL/min) into 400 mL leaching solutions at 40 °C for 120 min with magnetic stirring at 300 rpm. It is found that calcium in KR slag can be selectively extracted using a diluted solution of ammonium acetate (CH3COONH4) or ammonium chloride (NH4Cl), while ammonium sulfate ((NH4)2SO4) solution is not suitable as leaching agent due to the formation of slightly soluble calcium sulfate (CaSO4). The leaching ratio of calcium is improved by extending the leaching time or increasing the leaching solvent concentration. However, leaching temperature has little effect on calcium extraction. After carbonating the NH4Cl- and CH3COONH4-leachate for 120 min, calcite and vaterite type PCC with a purity of 99% is synthesized. Each gram of KR slag can produce 0.794 g and 0.803 g PCC using NH4Cl and CH3COONH4 leaching agents respectively. Calculations show that 349.6 kg CO2 is captured by per ton of KR slag. The CO2 capture capacity of KR slag is significantly higher compared with previously studied materials.

Controlling organic carbon increase in oxygenated marine sediment by using decarburization slag.

The chemical oxygen demand (COD) in the Seto Inland Sea, Japan has increased in the recent decades due to the increase of bottom dissolved oxygen (DO) concentration which stimulated several autotrophic microorganisms, specially sulfur oxidizing bacteria (SOB). This increased SOB activity due to the oxygenation of the bottom sediment synthesized new organic matter (OM) which contributed dissolved organic carbon to the overlying seawater. This phenomenon further led to hypoxia in some subareas in the Seto Inland Sea. Higher pH or alkaline environment has been found to be an unfavorable condition for SOB. In this research, we used decarburization slag to elevate the pH of sediment to control the SOB activity and consequently reduce OM production in the sediment. Ignition loss of the surface sediment increased from 5.14% 6.38% after 21 days of incubation with aeration; whereas the sediment showed the less ignition loss of 5.71% after 21 days when the slag was incubated in the same experimental setup. Microbial community analysis showed less SOB activity in the slag added aerated sediment which accounts for the controlled increase of OM in the sediment. An additional experiment was conducted with magnesium oxide to confirm whether elevated pH can control the OM increase in sediment due to rising DO. All these results showed that decarburization slag can elevate the pH of the sediment to a certain level which can control the SOB activity followed by controlled increase of OM in the sediment. The findings may be beneficial to control accumulation of sedimentary OM which can act as a source of organic carbon in the overlying seawater.

Efficient recovery of zinc and copper from copper smelting slag (CSS) by cooperative modification with a composite medium of FeS-O2.

Efficient recovery of valuable metals from copper smelting slag (CSS) can not only alleviate the pressure from resource scarcity, but also has important practical significance for the realization of green and sustainable production in the copper smelting industry. In this paper, a composite medium of FeS-O2 is used as a synergistic modifier to transform the solid-state valuable metals in CSS into leachable state of sulphates, and achieves efficient and comprehensive recovery of zinc and copper through neutral leaching. XRD, FTIR, XPS, etc and comparative analysis methods are used to deeply analyze the characteristics of occurrence phase and transformation rules of valuable metal in CSS, roasted slag and leached slag. The results show under the optimal roasting conditions of TRoasting = 650 °C, M(copper slag): M(FeS) = 1:1, V(O2): V(Ar) = 1:6 and tHolding = 90 min, the recovery rate for zinc is approximately 95.1 %, and that for copper is 99.3 %, almost all of which is recovered. These findings provide a new method and process foundation and theoretical support for the efficient resource utilization of CSS.

Advancing hydrogen generation: Kinetic insights and process refinement for sorption-enhanced steam gasification of biomass utilizing waste carbide slag.

Sorption enhanced steam gasification of biomass (SESGB) presents a promising approach for producing high-purity H2 with potential for zero or negative carbon emissions. This study investigated the effects of gasification temperature, CaO to carbon in biomass molar ratio [CaO/C], and steam flow on the SESGB process, employing carbide slag (CS) and its modifications, CSSi2 (mass ratio of CS to SiO2 is 98:2) and CSCG5 (mass ratio of CS to coal gangue (CG) is 95:5), as CaO-based sorbents. The investigation included non-isothermal and isothermal gasification experiments and kinetic analyses using corn cob (CC) in a macro-weight thermogravimetric setup, alongside a fixed-bed pyrolysis-gasification system to assess operational parameter effects on gas product. The results suggested that CO2 capture by CaO reduced the mass loss during the main gasification as the [CaO/C] increased. The appropriate temperature for SESGB process should be selected between 550 and 700 °C at atmospheric pressure. The appropriate amount of sorbent or steam could facilitate the gasification reaction, but excessive addition led to adverse effects. Operational parameters influenced the apparent activation energy (Ea) by affecting various gasification reactions. For each test, Ea at the char gasification stage was significantly higher than that at the rapid pyrolysis stage. The addition of CS notably increased H2 concentration and yield, while sharply reducing CO2 levels. H2 concentration initially rose and then fell with greater steam flow, peaking at 76.11 vol% for a steam flow of 1.0 g/min. H2 yield peaked at 298 mL/g biomass with a steam flow of 1.5 g/min, a gasification temperature of 600 °C and a [CaO/C] of 1.0. Increasing gasification temperature remarkably boosted the H2 and CO2 yields. Optimal conditions for the SESGB using CS as a sorbent, determined via response surface methodology (RSM), include a gasification temperature of 666 °C, a [CaO/C] of 1.99, and a steam flow of 0.5 g/min, under which H2 and CO2 yields were 464 and 48 mL/g biomass, respectively. CSSi2 and CSCG5 demonstrated excellent cyclic H2 production stability, maintaining H2 yields around 440 mL/g biomass and low CO2 yields (∼60 mL/g biomass) across five cycles. The study results offer new insights for the high-value utilization of agroforestry biomass and the reduction and resource utilization of industrial waste.

Low-cost optimization of industrial textile landfill sludge re-dewatering using ferrous sulfate and blast furnace slag.

This study was based on an industrial sludge landfill with a scale of 1 million cubic meters, which had been filled for more than 10 years. It focused on the secondary dewatering of industrial textile landfill sludge (LS) with a total organic carbon (TOC) content greater than 50% and a volatile suspended solids to suspended solids (VSS/SS) ratio of 0.59. A response surface methodology (RSM) model was established using the coagulant ferrous sulfate (FeSO4) and conditioning agents such as hydrated magnesium oxide (MgO), blast furnace slag (BFS), and calcium oxide (CaO). By solving the RSM equations for the respective indicators, the optimal dosages of FeSO4, MgO, and BFS were determined to be 90 mg/g of dry sludge (DS), and for CaO 174.85 mg/g DS. Further examinations of the dewatering performance, apparent properties, extracellular polymeric substances (EPS) components, rheological characteristics, moisture distribution, and pollutant content variation led to the development of a green waste-based dewatering agent composed of FeSO4 and BFS. In small-scale diaphragm plate and frame filter press tests, the optimal water content (WC) was 69.11%. In the final production-scale experiments, it was 65.72%, with the actual application cost being only 13.07 $/ton DS. Additionally, when FeSO4 and BFS were used together, the combined action of Fe and Si could significantly reduce the biotoxicity of heavy metals (HMs), cut down 75.2% of the LS's TOC, and effectively reduced the leaching of organic substances from the leachate, which was beneficial for subsequent disposal. In conclusion, the combined use of FeSO4 and BFS for the secondary dewatering of industrial textile LS was economically efficient, effective in dewatering, and had significant harm reduction effects, making it a worthwhile for waste treatment.