Counterion Distribution in the Stern Layer on Charged Surfaces.

Counterion adsorption at the solid-liquid interface affects numerous applications. However, the counterion adsorption density in the Stern layer has remained poorly evaluated. Here we report the direct determination of surface charge density at the shear plane between the Stern layer and the diffuse layer. By the Grahame equation extension and streaming current measurements for different solid surfaces in different aqueous electrolytes, we are able to obtain the counterion adsorption density in the Stern layer, which is mainly related to the surface charge density but is less affected by the bulk ion concentration. The charge inversion concentration is further found to be sensitive to the ion type and ion valence rather than to the charged surface, which is attributed to the ionic competitive adsorption and ion-ion correlations. Our findings offer a framework for understanding ion distribution in many physical and chemical processes where the Stern layer is ubiquitous.

Monodispersed Renewable Particles by Cascade and Density Gradient Size Fractionation to Advance Lignin Nanotechnologies.

Control over particle size and shape heterogeneity is highly relevant to the design of photonic coatings and supracolloidal assemblies. Most developments in the area have relied on mineral and petroleum-derived polymers that achieve well-defined chemical and dimensional characteristics. Unfortunately, it is challenging to attain such control when considering renewable nanoparticles. Herein, a pathway toward selectable biobased particle size and physicochemical profiles is proposed. Specifically, lignin is fractionated, a widely available heterogeneous polymer that can be dissolved in aqueous solution, to obtain a variety of monodispersed particle fractions. A two-stage cascade and density gradient centrifugation that relieves the need for solvent pre-extraction or other pretreatments but achieves particle bins of uniform size (~60 to 860 nm and polydispersity, PDI<0.06, dynamic light scattering) along with characteristic surface chemical features is introduced. It is found that the properties and associated colloidal behavior of the particles are suitably classified in distinctive size populations, namely, i) nanoscale (50-100 nm), ii) photonic (100-300 nm) and iii) near-micron (300-1000 nm). The strong correlation that exists between size and physicochemical characteristics (molar mass, surface charge, bonding and functional groups, among others) is introduced as a powerful pathway to identify nanotechnological uses that benefit from the functionality and cost-effectiveness of biogenic particles.

On the behavior of sub-micrometer polystyrene particles subjected to AC insulator-based dielectrophoresis.

Polymer beads, especially polystyrene particles, have been extensively used as model species in insulator-based dielectrophoresis (iDEP) studies. Their use in alternating current iDEP (AC-iDEP) is less explored; however, an assessment in the low-frequency regime (≤10 kHz) allows to link surface conduction effects with the surface properties of polymer particles. Here, we provide a case study for various experimental conditions assessing sub-micrometer polystyrene particles with AC-iDEP and link to accepted surface conduction theory to predict and experimentally verify the observed AC-iDEP trapping behavior based on apparent zeta potential and solution conductivity. We find excellent agreement with the theoretical predictions, but also the occurrence of concentration polarization electroosmotic flow under the studied conditions, which have the potential to confound acting dielectrophoresis conditions. Furthermore, we study a case relevant to the assessment of microplastics in human and animal body fluids by mimicking the protein adsorption of high abundant proteins in blood by coating polystyrene beads with bovine serum albumin, a highly abundant protein in blood. Theoretical predictions and experimental observations confirm a difference in observed AC-iDEP behavior between coated and non-coated particles, which might be exploited for future studies of microplastics in blood to assess their exposure to humans and animals.

Electrokinetic transport of CTAB induces multiphasic behavior during capillary adsorption and desorption.

Cationic surfactant coatings (e.g., CTAB) are commonly used in CE to control EOF and thereby improve separation efficiencies. However, our understanding of surfactant adsorption and desorption dynamics under EOF conditions is limited. Here, we apply automated zeta potential analysis to study the adsorption and desorption kinetics of CTAB in a capillary under different transport conditions: diameter, length, voltage alternation pattern and frequency, and applied pressure. In contrast to other studies, we observe slower kinetics at distinct capillary wall zeta potential ranges. Within these ranges, which we call "stagnant regimes," the EOF mobility significantly counteracts the electrophoretic (EP) mobility of CTA+ and hinders the net transport. By constructing a numerical model to compare with our experiments and recasting our experimental data in terms of the net CTA+ transport volume normalized by surface area, we reveal that the EP mobility of CTA+ and the capillary surface-area-to-volume ratio dictate the zeta potential range and the duration of the stagnant regime and thereby govern the overall reaction kinetics. Our results indicate that further transport-oriented studies can significantly aid in the understanding and design of electrokinetic systems utilizing CTAB and other charged surfactants.

Impact of Biofilms on Surface Properties of Polymethyl Methacrylate (PMMA) Resins.

Poly(methyl methacrylate) (PMMA) resins are widely used in medical and dental applications. Their susceptibility to bacterial biofilm formation poses significant challenges related to material degradation and infection risk. This study investigated the effects of Pseudomonas aeruginosa (P. aeruginosa) and Staphylococcus aureus (S. aureus) biofilms on PMMA resin surface properties over a 45-day period at 35°C. The study examined various parameters including biofilm adhesion, morphology, surface roughness, hydrophobicity, solid fraction, and zeta potential. PMMA resin specimens were inoculated with bacteria and incubated for 45 days. Biofilm adhesion was visually assessed, while surface characterization was conducted using scanning electron microscopy (SEM), atomic force microscopy (AFM), roughness analysis, contact angle measurements, solid fraction determination, and zeta potential analysis. The P. aeruginosa and S. aureus isolates were selected based on their biofilm-positive characteristics, which were further confirmed using Congo red and biofilm formation assays through crystal violet staining and spectrophotometric analysis. The results demonstrated robust biofilm adhesion on PMMA surfaces. SEM and AFM imaging revealed textured surfaces with elevated structures and depressions within the biofilm matrix. Biofilm-exposed resins exhibited significantly increased roughness (Ra = 164.5 nm, Rq = 169.5 nm) and hydrophobicity (mean angle = 85.5°-90.5°) compared to control samples (Ra = 38-50 nm, angle = 55°). Solid fraction measurements indicated a denser biofilm matrix on exposed resins (0.908) compared to controls (0.65). Additionally, zeta potential values were more negative for biofilm-exposed resins (mean = -84.2 mV) than controls (-45.0 mV). These findings underscore the substantial alterations in PMMA resin surface properties induced by bacterial biofilms, emphasizing the critical need for strategies to prevent biofilm formation and mitigate associated risks in healthcare settings. Future research should focus on developing anti-biofilm coatings or treatments to preserve the integrity and functionality of PMMA materials.

Physicochemical Characteristics of Porous Starch Obtained by Combined Physical and Enzymatic Methods, Part 1: Structure, Adsorption, and Functional Properties.

Porous starch can be applied as an adsorbent and encapsulant for bioactive substances in the food and pharmaceutical industries. By using appropriate modification methods (chemical, physical, enzymatic, or mixed), it is possible to create pores on the surface of the starch granules without disturbing their integrity. This paper aimed to analyze the possibility of obtaining a porous structure for native corn, potato, and pea starches using a combination of ultrasound, enzymatic digestion, and freeze-drying methods. The starch suspensions (30%, w/w) were treated with ultrasound (20 kHz, 30 min, 20 °C), then dried and hydrolyzed with amyloglucosidase (1000 U/g starch, 50 °C, 24 h, 2% starch suspension). After enzyme digestion, the granules were freeze-dried for 72 h. The structure of the native and modified starches were examined using VIS spectroscopy, SEM, ATR-FTIR, and LTNA (low-temperature nitrogen adsorption). Based on the electrophoretic mobility measurements of the starch granules using a laser Doppler velocimeter, zeta potentials were calculated to determine the surface charge level. Additionally, the selected properties such as the water and oil holding capacities, least gelling concentration (LGC), and paste clarity were determined. The results showed that the corn starch was the most susceptible to the combined modification methods and was therefore best suited for the production of porous starch.

Starch-Based Polysaccharide Systems with Bioactive Substances: Physicochemical and Wettability Characteristics.

Polysaccharide-based systems have very good emulsifying and stabilizing properties, and starch plays a leading role. Their modifications should add new quality features to the product to such an extent that preserves the structure-forming properties of native starch. The aim of this manuscript was to examine the physicochemical characteristics of the combinations of starch with phospholipids or lysozymes and determine the effect of starch modification (surface hydrophobization or biological additives) and preparation temperature (before and after gelatinization). Changes in electrokinetic potential (zeta), effective diameter, and size distribution as a function of time were analyzed using the dynamic light scattering and microelectrophoresis techniques. The wettability of starch-coated glass plates before and after modification was checked by the advancing and receding contact angle measurements, as well as the angle hysteresis, using the settle drop method as a complement to profilometry and FTIR. It can be generalized that starch dispersions are more stable than analogous n-alkane/starch emulsions at room and physiological temperatures. On the other hand, the contact angle hysteresis values usually decrease with temperature increase, pointing to a more homogeneous surface, and the hydrophobization effect decreases vs. the thickness of the substrate. Surface hydrophobization of starch carried out using an n-alkane film does not change its bulk properties and leads to improvement of its mechanical and functional properties. The obtained specific starch-based hybrid systems, characterized in detail by switchable wettability, give the possibility to determine the energetic state of the starch surface and understand the strength and specificity of interactions with substances of different polarities in biological processes and their applicability for multidirectional use.

Thermal Stability of Dispersions of Amino-Functionalized Silica in Glycol and in 50-50 Aqueous Glycol.

Dispersions of amino-functionalized silica in ethylene glycol (EG) and in aqueous glycol show excellent stability at room temperature. Stability at elevated temperatures would be much desired with respect to their potential application as heat-transfer fluids. Amino-functionalized silica was dispersed in EG and in 50-50 aqueous EG by mass. HCl and acetic acid were added to enhance the positive ζ potential. The dispersions were stored at 40, 60, 80, and 100 °C for up to 28 days, and ζ potential and apparent particle radius were studied as a function of elapsed time. The particles showed a positive ζ potential in excess of 40 mV (Smoluchowski), which remained unchanged for 28 days. Such a high absolute value of ζ potential is sufficient to stabilize the dispersion against flocculation and sedimentation. The apparent particle radius in acidified dispersions was about 70 nm, and it was stable for 28 days. The particles were larger in pH-neutral dispersions. The apparent particle radius was about 80 nm in fresh dispersions and it increased on long storage at 80 and 100 °C.

Assessment of Selected Surface and Electrochemical Properties of Boron and Strontium-Substituted Hydroxyapatites.

Tissue engineering is an interdisciplinary field of science that has been developing very intensively over the last dozen or so years. New ways of treating damaged tissues and organs are constantly being sought. A variety of porous structures are currently being investigated to support cell adhesion, differentiation, and proliferation. The selection of an appropriate biomaterial on which a patient's new tissue will develop is one of the key issues when designing a modern tissue scaffold and the associated treatment process. Among the numerous groups of biomaterials used to produce three-dimensional structures, hydroxyapatite (HA) deserves special attention. The aim of this paper was to discuss changes in the double electrical layer in hydroxyapatite with an incorporated boron and strontium/electrolyte solution interface. The adsorbents were prepared via dry and wet precipitation and low-temperature nitrogen adsorption and desorption methods. The specific surface area was characterized, and the surface charge density and zeta potential were discussed.

Effect of Dielectric Constant on the Zeta Potential of Spherical Electric Double Layers.

Zeta potential refers to the electrokinetic potential present in colloidal systems, exerting significant influence on the diverse properties of nano-drug delivery systems. The impact of the dielectric constant on the zeta potential and charge inversion of highly charged colloidal particles immersed in a variety of solvents spanning from polar, such as water, to nonpolar solvents and in the presence of multivalent salts was investigated through primitive Monte Carlo (MC) model simulations. Zeta potential, ξ, is decreased with the decreasing dielectric constant of the solvent and upon further increase in the salinity and the valency of the salt. At elevated levels of salt, the colloidal particles become overcharged in all solvents. As a result, their apparent charge becomes opposite in sign to the stoichiometric charge. This reversal of charge intensifies until reaching a saturation point with further increase in salinity.

Antibacterial Activity of Plant Polyphenols Belonging to the Tannins against Streptococcus mutans-Potential against Dental Caries.

Dental caries (DC) is the most common oral pathology. The main bacteria responsible for DC is Streptococcus mutans. One of the strategies that can decrease or eliminate the risk of DC development is using compounds that will inhibit both the growth and virulence factors of S. mutans. Tannins are plant polyphenols that have strong antibacterial activity. The purpose of this study was to assess the antibacterial activity of three tannins against S. mutans. In this investigation, microbiological tests (MIC and MBC) and physicochemical techniques like the fluorescence measurements of tannins' interaction with S. mutans cell membrane and membrane proteins, zeta potential, and thermodynamic analyses were used to obtain knowledge about the antibacterial potential of the investigated compounds against S. mutans as well as about the mechanisms associated with antibacterial activity. The obtained results demonstrate that the used compounds exhibit high antibacterial activity against S. mutans. The mechanisms of their antibacterial activity are linked to the strong change in the S. mutans membrane fluidity and potential, and to their interaction with membrane proteins that can result in great disturbance of bacterial physiology and ultimately the inhibition of bacterial growth, triggering their death. Therefore, it can be concluded that the investigated compounds can be potentially used as natural factors in the prevention of dental caries.

Preparation and Mechanism of Shale Inhibitor TIL-NH2 for Shale Gas Horizontal Wells.

In this study, a new polyionic polymer inhibitor, TIL-NH2, was developed to address the instability of shale gas horizontal wells caused by water-based drilling fluids. The structural characteristics and inhibition effects of TIL-NH2 on mud shale were comprehensively analyzed using infrared spectroscopy, NMR spectroscopy, contact angle measurements, particle size distribution, zeta potential, X-ray diffraction, thermogravimetric analysis, and scanning electron microscopy. The results demonstrated that TIL-NH2 significantly enhances the thermal stability of shale, with a decomposition temperature exceeding 300 °C, indicating excellent high-temperature resistance. At a concentration of 0.9%, TIL-NH2 increased the median particle size of shale powder from 5.2871 µm to over 320 µm, effectively inhibiting hydration expansion and dispersion. The zeta potential measurements showed a reduction in the absolute value of illite's zeta potential from -38.2 mV to 22.1 mV at 0.6% concentration, highlighting a significant decrease in surface charge density. Infrared spectroscopy and X-ray diffraction confirmed the formation of a close adsorption layer between TIL-NH2 and the illite surface through electrostatic and hydrogen bonding, which reduced the weakly bound water content to 0.0951% and maintained layer spacing of 1.032 nm and 1.354 nm in dry and wet states, respectively. Thermogravimetric analysis indicated a marked reduction in heat loss, particularly in the strongly bound water content. Scanning electron microscopy revealed that shale powder treated with TIL-NH2 exhibited an irregular bulk shape with strong inter-particle bonding and low hydration degree. These findings suggest that TIL-NH2 effectively inhibits hydration swelling and dispersion of shale through the synergistic effects of cationic imidazole rings and primary amine groups, offering excellent temperature and salt resistance. This provides a technical foundation for the low-cost and efficient extraction of shale gas in horizontal wells.

Surface Charge-Modulated Toxicity of Cysteine-Stabilized Silver Nanoparticles.

The toxicity of silver nanoparticles (AgNPs) depends on their physicochemical properties. The ongoing research aims to develop effective methods for modifying AgNPs using molecules that enable control over the processes induced by nanoparticles in both normal and cancerous cells. Application of amino acid-stabilized nanoparticles appears promising, exhibiting tunable electrokinetic properties. Therefore, this study focused on determining the influence of the surface charge of cysteine (CYS)-stabilized AgNPs on their toxicity towards human normal B (COLO-720L) and T (HUT-78) lymphocyte cell lines. CYS-AgNPs were synthesized via the chemical reduction. Transmission electron microcopy (TEM) imaging revealed that they exhibited a quasi-spherical shape with an average size of 18 ± 3 nm. CYS-AgNPs remained stable under mild acidic (pH 4.0) and alkaline (7.4 and 9.0) conditions, with an isoelectric point observed at pH 5.1. Following a 24 h treatment of lymphocytes with CYS-AgNPs, concentration-dependent alterations in cell morphology were observed. Positively charged CYS-AgNPs notably decreased lymphocyte viability. Furthermore, they exhibited grater genotoxicity and more pronounced disruption of biological membranes compared to negatively charged CYZ-AgNPs. Despite both types of AgNPs interacting similarly with fetal bovine serum (FBS) and showing comparable profiles of silver ion release, the biological assays consistently revealed that the positively charged CYS-AgNPs exerted stronger effects at all investigated cellular levels. Although both types of CYS-AgNPs have the same chemical structure in their stabilizing layers, the pH-induced alterations in their surface charge significantly affect their biological activity.

Deposition of Human-Serum-Albumin-Functionalized Spheroidal Particles on Abiotic Surfaces: Reference Kinetic Results for Bioparticles.

Human serum albumin (HSA) corona formation on polymer microparticles of a spheroidal shape was studied using dynamic light scattering and Laser Doppler Velocimetry (LDV). Physicochemical characteristics of the albumin comprising the zeta potential and the isoelectric point were determined as a function of pH for various ionic strengths. Analogous characteristics of the polymer particles were analyzed. The adsorption of albumin on the particles was in situ monitored by LDV. The stability of the HSA-functionalized particle suspensions under various pHs and their electrokinetic properties were also determined. The deposition kinetics of the particles on mica, silica and gold sensors were investigated by optical microscopy, AFM and quartz microbalance (QCM) under diffusion and flow conditions. The obtained results were interpreted in terms of the random sequential adsorption model that allowed to estimate the range of applicability of QCM for determining the deposition kinetics of viruses and bacteria at abiotic surfaces.

Effects of pH and salt concentration on freeze-thaw fractionation of soymilk protein.

BACKGROUND: The two major storage proteins of soymilk are the globulins 7S and 11S. Freeze-thaw fractionation is a simple method for separating these proteins in raw soymilk. In this study, we assessed the freeze-thaw fractionation ability of raw soymilk under various pH (4.3-11.6) conditions and added salt (sodium chloride) concentrations (0.00-0.67 mol L-1). RESULTS: We successfully achieved fractionation within a pH range of 5.8-6.7 and when the salt concentration was 0.22 mol L-1 or lower. Analysis of particle size distribution and microscopic examination of soymilk revealed no direct correlation between particle size and freeze-thaw fractionation ability. Interestingly, it was confirmed that the ranges of zeta potential values associated with successful freeze-thaw fractionation in raw soymilk remained consistent across different pH and salt concentration conditions. These ranges were between -23 and -28 mV at pH levels ranging from 5.8 to 6.7 and between -18 and -29 mV at added salt concentrations ranging from 0 to 0.22 mol L-1. CONCLUSION: The pH and salt concentration in raw soymilk markedly influence the freeze-thaw fractionation process. We confirmed that the range of zeta potential values where fractionation was possible remained consistent under various pH and salt concentration conditions. These findings suggest that the zeta potential value might serve as an indicator for evaluating the freeze-thaw fractionation ability of raw soymilk. © 2024 Society of Chemical Industry.

Fucoidan coated liposomes loaded with novel antituberculosis agent: preparation, evaluation, and cytotoxicity study.

In this article, we described a novel antituberculosis imidazotetrazine derivative designed in fucoidan-coated liposomes to reduce its cytotoxicity and investigate its mucoadhesive properties. Firstly, fucoidan extracted from Ascophyllum nodosum was used for additional stabilization of liposomal suspensions and to give it mucoadhesive properties. PEG-600 and/or Tween-80 were used to increase the shelf life of liposomal suspension. The ratio of the fucoidan: lipids 1:2 was found to be the optimum that produces stable fucoidan-coated liposomes. The particle size of the optimum formulation was 336.3 ± 5.4, the PDI was 0.33, and the zeta potential was -39.6. This size and the practical spherical shape of the particles were confirmed by atomic force microscopy. In addition, the in vitro release profiles from uncoated and fucoidan-coated liposomes revealed significant and faster release compared to free antituberculosis agent. Using the MTT assay test, the fucoidan-coated liposomes exhibited fourteen times lower cytotoxicity (IC50 7.14 ± 0.91 µg/ml) than the free drug (IC50 0.49 ± 0.06). Moreover, the mucoadhesive capabilities of these liposomal formulations were also confirmed using snail mucin, which highlighting their potential use as an effective delivery system for antituberculosis therapy, with notable improvements in dissolution rate and reduced cytotoxicity.

Characterization and Techno-Functional Properties of High Protein Walnut Flour from an Oil by-Product.

A high protein walnut flour (HPWF) was obtained by defatting walnut flour (WF), which is a by-product of the oil industry. The objective of this study was the chemical and techno-functional characterization of HPWF. Composition, amino acid content, protein secondary structure, protein solubility and thermal transitions were measured. Besides, the techno-functional properties, emulsion activity and stability, and water holding and oil absorption capacities, of HPWF were evaluated. Also, the molecular mass of proteins under denaturing conditions and the microstructure of HPWF were evaluated by electrophoresis and confocal scanning laser microscopy, respectively. HPWF had 55.4% protein content and 21.5% total dietary fibre. In terms of HPWF amino acid composition, the limiting amino acids were the sulphurated cysteine and methionine. By FTIR analysis, the main secondary structures were ß-sheet (49%) followed by α-helix (24%); both structures are considered to be ordered. Likewise, HPWF soluble proteins increased at basic pH and HPWF proteins were separated in 11 bands with molecular masses ranging from 97 kDa to 18 kDa by electrophoresis. With respect to techno-functional properties, HPWF presented good emulsion activity (51%) and high thermal emulsion stability (46%). In addition, HPWF retained 571% and 242% of water and oil by weight, respectively. Finally, the micrograph showed the predominance of protein structures and fibre fragments, and the presence of few lipids mostly trapped. These results showed that HPWF is an interesting source of plant-based proteins and walnut flour can be used to obtain high protein ingredients from non-traditional sources.

Alteration of zeta potential and cell viability in rat-derived L6 skeletal muscle cells and H9c2 cardiomyocytes: A study with submicron polystyrene particles.

BACKGROUND: Microand nanoplastics pollution can cause substantial damage to ecosystems. Since scientists have focused mainly on their impact on aquatic environments, less attention has been paid to the accumulation of polymer particles in terrestrial organisms. OBJECTIVES: We checked if submicron (<5 mm) polystyrene (PS) particles, which can accumulate in living organisms, lead to changes in the physicochemical properties of mammalian cell membranes. MATERIAL AND METHODS: The influence of submicron PS particles on the properties of rat-derived L6 myocytes and H9c2 cardiomyocytes was analyzed. Non-functionalized and amine-functionalized PS particles of 100 nm and 200 nm in diameter were used. The MTT assay was performed to evaluate the viability of the polymers-treated cells. The effect of short (6 h) and prolonged (48 h) incubation with different concentrations of PS particles on the cell's zeta (ζ) potential was examined with the electrophoretic light scattering technique (ELS). Polystyrene particles' physicochemical characteristics (size and stability) were performed using dynamic light scattering (DLS) and electrophoretic light scattering methods. RESULTS: The results show that submicron PS particles affect cell viability and cause changes in the physiochemical parameters of rat cell membranes. Differences were observed depending on the origin of the cells. We observed doseand time-dependent alterations in the studied parameters after submicron PS particle incubation in L6 myotubes and H9c2 cardiomyocytes. CONCLUSIONS: The size and modification of PS particle surfaces determine the extent to which they affect the analyzed properties of rat cardiomyocytes and myocytes membranes.

Colloidal Zeta Potential Modulation as a Handle to Control the Crystallization Kinetics of Tin Halide Perovskites for Photovoltaic Applications.

Tin halide perovskites (THPs) have demonstrated exceptional potential for various applications owing to their low toxicity and excellent optoelectronic properties. However, the crystallization kinetics of THPs are less controllable than its lead counterpart because of the higher Lewis acidity of Sn2+, leading to THP films with poor morphology and rampant defects. Here, a colloidal zeta potential modulation approach is developed to improve the crystallization kinetics of THP films inspired by the classical Derjaguin-Landau-Verwey-Overbeek (DLVO) theory. After adding 3-aminopyrrolidine dihydro iodate (APDI2) in the precursor solution to change the zeta potential of the pristine colloids, the total interaction potential energy between colloidal particles with APDI2 could be controllably reduced, resulting in a higher coagulation probability and a lower critical nuclei concentration. In situ laser light scattering measurements confirmed the increased nucleation rate of the THP colloids with APDI2. The resulting film with APDI2 shows a pinhole-free morphology with fewer defects, achieving an impressive efficiency of 15.13 %.

Temperature-Promoted Giant Unilamellar Vesicle (GUV) Aggregation: A Way of Multicellular Formation.

The evolution of unicellular to multicellular life is considered to be an important step in the origin of life, and it is crucial to study the influence of environmental factors on this process through cell models in the laboratory. In this paper, we used giant unilamellar vesicles (GUVs) as a cell model to investigate the relationship between environmental temperature changes and the evolution of unicellular to multicellular life. The zeta potential of GUVs and the conformation of the headgroup of phospholipid molecules at different temperatures were examined using phase analysis light scattering (PALS) and attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR), respectively. In addition, the effect of increasing temperature on the aggregation of GUVs was further investigated in ionic solutions, and the possible mechanisms involved were explored. The results showed that increasing temperature reduced the repulsive forces between cells models and promoted their aggregation. This study could effectively contribute to our understanding of the evolution of primitive unicellular to multicellular life.