GROWTH REGULATING FACTOR 7-mediated arbutin metabolism enhances rice salt tolerance.

Salt stress is an environmental factor that limits plant growth and crop production. With the rapid expansion of salinized arable land worldwide, investigating the molecular mechanisms underlying the salt stress response in plants is urgently needed. Here, we report that GROWTH REGULATING FACTOR 7 (OsGRF7) promotes salt tolerance by regulating arbutin (hydroquinone-ß-D-glucopyranoside) metabolism in rice (Oryza sativa). Overexpression of OsGRF7 increased arbutin content, and exogenous arbutin application rescued the salt-sensitive phenotype of OsGRF7 knockdown and knockout plants. OsGRF7 directly promoted the expression of the arbutin biosynthesis genes URIDINE DIPHOSPHATE GLYCOSYLTRANSFERASE 1 (OsUGT1) and OsUGT5, and knockout of OsUGT1 or OsUGT5 reduced rice arbutin content, salt tolerance, and grain size. Furthermore, OsGRF7 degradation through its interaction with F-BOX AND OTHER DOMAINS CONTAINING PROTEIN 13 reduced rice salinity tolerance and grain size. These findings highlight an underexplored role of OsGRF7 in modulating rice arbutin metabolism, salt stress response, and grain size, as well as its broad potential use in rice breeding.

Characterization of Amycolatopsis 75iv2 dye-decolorizing peroxidase on O-glycosides.

Dye-decolorizing peroxidases are heme peroxidases with a broad range of substrate specificity. Their physiological function is still largely unknown, but a role in the depolymerization of plant cell wall polymers has been widely proposed. Here, a new expression system for bacterial dye-decolorizing peroxidases as well as the activity with previously unexplored plant molecules are reported. The dye-decolorizing peroxidase from Amycolatopsis 75iv2 (DyP2) was heterologously produced in the Gram-positive bacterium Streptomyces lividans TK24 in both intracellular and extracellular forms without external heme supplementation. The enzyme was tested on a series of O-glycosides, which are plant secondary metabolites with a phenyl glycosidic linkage. O-glycosides are of great interest, both for studying the compounds themselves and as potential models for studying specific lignin-carbohydrate complexes. The primary DyP reaction products of salicin, arbutin, fraxin, naringin, rutin, and gossypin were oxidatively coupled oligomers. A cleavage of the glycone moiety upon radical polymerization was observed when using arbutin, fraxin, rutin, and gossypin as substrates. The amount of released glucose from arbutin and fraxin reached 23% and 3% of the total substrate, respectively. The proposed mechanism suggests a destabilization of the ether linkage due to the localization of the radical in the para position. In addition, DyP2 was tested on complex lignocellulosic materials such as wheat straw, spruce, willow, and purified water-soluble lignin fractions, but no remarkable changes in the carbohydrate profile were observed, despite obvious oxidative activity. The exact action of DyP2 on such lignin-carbohydrate complexes therefore remains elusive. IMPORTANCE: Peroxidases require correct incorporation of the heme cofactor for activity. Heterologous overproduction of peroxidases often results in an inactive enzyme due to insufficient heme synthesis by the host organism. Therefore, peroxidases are incubated with excess heme during or after purification to reconstitute activity. S. lividans as a production host can produce fully active peroxidases both intracellularly and extracellularly without the need for heme supplementation. This reduces the number of downstream processing steps and is beneficial for more sustainable production of industrially relevant enzymes. Moreover, this research has extended the scope of dye-decolorizing peroxidase applications by studying naturally relevant plant secondary metabolites and analyzing the formed products. A previously overlooked artifact of radical polymerization leading to the release of the glycosyl moiety was revealed, shedding light on the mechanism of DyP peroxidases. The key aspect is the continuous addition, rather than the more common approach of a single addition, of the cosubstrate, hydrogen peroxide. This continuous addition allows the peroxidase to complete a high number of turnovers without self-oxidation.

Cosmetically Approved Short-Chain Alcohol/Triethyl Citrate/Water Surfactant-Free Microemulsions and Potential Application to Transdermal Penetration of α-Arbutin.

Surfactant-free microemulsions (SFMEs) exhibited remarkable advantages and potential, attributed to their similarity to traditional surfactant-based microemulsions and the absence of surfactants. Herein, a novel SFME was developed utilizing cosmetically approved materials, such as short-chain alcohol as an amphi-solvent, triethyl citrate (TEC) as the nonpolar phase, and water as the polar phase. 1,2-Pentanediol (PtDO)/TEC/water combination can form the largest monophasic zone, accounting for ∼74% of the total phase diagram area, due to an optimal hydrophilic (water)-lipophilic (TEC) balance. Comparable to surfactant-based microemulsion, PtDO/TEC/water SFME can also be categorized into three types: water-in-oil, discontinuous, and oil-in-water. As TEC or water is increased, or PtDO is decreased, the nanoaggregates in PtDO/TEC/water SFME grow from <5 nm to tens of nanometers. The addition of α-arbutin (ABN) does not disrupt PtDO/TEC/water SFME, but rather enhances its formation, resulting in a larger monophasic area and consistent size (2.8-3.8 nm) through participating in interface assembly. Furthermore, ABN-loaded PtDO/TEC/water SFME exhibits remarkable resistance to dilution, exceptional stability, and minimal irritation. Notably, PtDO/TEC/water SFME significantly boosts ABN's solubility in water by 2 times, its percutaneous penetration rate by 3-4 times, and enables a slow-release DPPH• radical scavenging effect. This SFME serves as a safe and cosmetically suitable nanoplatform for the delivery of bioactive substances.

De novo biosynthesis of ß-Arbutin in Komagataella phaffii based on metabolic engineering strategies.

BACKGROUND: ß-Arbutin, found in the leaves of bearberry, stands out as one of the globally acknowledged eco-friendly whitening additives in recent years. However, the natural abundance of ß-Arbutin is low, and the cost-effectiveness of using chemical synthesis or plant extraction methods is low, which cannot meet the requirements. While modifying the ß-Arbutin synthesis pathway of existing strains is a viable option, it is hindered by the limited synthesis capacity of these strains, which hinders further development and application. RESULTS: In this study, we established a biosynthetic pathway in Komagataella phaffii for ß-Arbutin production with a titer of 1.58 g/L. Through diverse metabolic strategies, including fusion protein construction, enhancing shikimate pathway flux, and augmenting precursor supplies (PEP, E4P, and UDPG), we significantly increased ß-Arbutin titer to 4.32 g/L. Further optimization of methanol concentration in shake flasks led to a titer of 6.32 g/L titer after 120 h of fermentation, representing a fourfold increase over the initial titer. In fed-batch fermentation, strain UA3-10 set a record with the highest production to date, reaching 128.6 g/L in a 5 L fermenter. CONCLUSIONS: This is the highest yield in the fermentation tank level of using microbial cell factories for de novo synthesis of ß-Arbutin. Applying combinatorial engineering strategies has significantly improved the ß-Arbutin yield in K. phaffii and is a promising approach for synthesizing functional products using a microbial cell factory. This study not only advances low-cost fermentation-based production of ß-Arbutin but also establishes K. phaffii as a promising chassis cell for synthesizing other aromatic amino acid metabolites.

Protective effects of arbutin against doxorubicin-induced cardiac damage.

BACKGROUND: Doxorubicin is an effective antineoplastic agent but has limited clinical application because of its cumulative toxicities, including cardiotoxicity. Cardiotoxicity causes lipid peroxidation, genetic impairment, oxidative stress, inhibition of autophagy, and disruption of calcium homeostasis. Doxorubicin-induced cardiotoxicity is frequently tried to be mitigated by phytochemicals, which are derived from plants and possess antioxidant, anti-inflammatory, and anti-apoptotic properties. Arbutin, a natural antioxidant found in the leaves of the bearberry plant, has numerous pharmacological benefits, including antioxidant, anti-bacterial, anti-hyperglycemic, anti-inflammatory, and anti-tumor activity. METHODS AND RESULTS: The study involved male Wistar rats divided into three groups: a control group, a group treated with doxorubicin (20 mg/kg) to induce cardiac toxicity, a group treated with arbutin (100 mg/kg) daily for two weeks before doxorubicin administration. After treatment, plasma and heart tissue samples were collected for analysis. The samples were evaluated for oxidative stress parameters, including superoxide dismutase, malondialdehyde, and catalase, as well as for cardiac biomarkers, including CK, CK-MB, and LDH. The heart tissues were also analyzed using molecular (TNF-α, IL-1ß and Caspase 3), histopathological and immunohistochemical methods (8-OHDG, 4 Hydroxynonenal, and dityrosine). The results showed that arbutin treatment was protective against doxorubicin-induced oxidative damage by increasing SOD and CAT activity and decreasing MDA level. Arbutin treatment was similarly able to reverse the inflammatory response caused by doxorubicin by reducing TNF-α and IL-1ß levels and also reverse the apoptosis by decreasing caspase-3 levels. It was able to prevent doxorubicin-induced cardiac damage by reducing cardiac biomarkers CK, CK-MB and LDH levels. In addition to all these results, histopathological analyzes also show that arbutin may be beneficial against the damage caused by doxorubicin on heart tissue. CONCLUSION: The study suggests that arbutin has the potential to be used to mitigate doxorubicin-induced cardiotoxicity in cancer patients.

Silencing FHL2 inhibits bleomycin-induced pulmonary fibrosis through the TGF-ß1/Smad signaling pathway.

OBJECTIVE: This study aimed to investigate the inhibiting effects of FHL2 and Arbutin on cell fibrosis and their possible mechanisms. METHODS: The mRNA expression of FHL2 in pulmonary fibrosis tissues was analyzed by bioinformatics. TGF⁃ß1 induced fibrosis of mouse lung fibroblast (Mlg) and mouse primary pulmonary fibroblast (PPF) in rat's lung fibroblasts. FHL2 siRNA was transfected into Mlg and mouse PPF cells to inhibit FHL2. FHL2, α-smooth muscle actin (α-SMA), collagen 1 (Col I), and Fibronectin (Fn) were detected by qRT-PCR. Western blot expression levels of Smad3, p-Smad3, Smad2, and p-Smad2 proteins in cells. High-throughput drug screening for FHL2 inhibitors and the inhibitory effect of Arbutin on pulmonary fibrosis were validated in cellular and animal models of pulmonary fibrosis. RESULTS: The mRNA expression of FHL2 in lung fiber tissue was increased. Meanwhile, the decrease of FHL2 expression significantly inhibited the cellular fibrosis morphological changes of rat's lung fibroblasts (Mlgs) and primary lung fibroblasts (PPFs). The expression levels of α⁃SMA, Col I, and Fn were decreased. High-throughput screening showed that Arbutin targeted FHL2. Arbutin alleviated bleomycin (BLM)-induced pulmonary fibrosis in rats by inhibiting FHL2 and then the TGF-ß1/Smad signaling pathway. CONCLUSION: Inhibition of FHL2 can effectively reduce the fibrosis process induced by TGF⁃ß1 and bleomycin, and then inhibit the fibrosis.

Liposome preparation of alpha-arbutin: stability and toxicity assessment using mouse B16F10 melanoma cells.

Melanoma is the most aggressive type of skin cancer, with few therapeutic alternatives following metastasis development. In recent years, drug delivery-associated nanotechnology has shown promising targeted results with diminished adverse effects compared to conventional treatments. This study aimed to (1) examine the effects of plant-derived α-arbutin, a natural compound and (2) compare these findings with bioactively developed liposomes containing α-arbutin utilizing the B16-F10 murine melanoma cell line as a model. Liposomes were obtained through reversed-phase evaporation by applying a spray dryer to assess their stability. The following biologic assays were measured cytotoxicity/antiproliferative (MTT, Neutral Red, and dsDNA PicoGreen). In addition, the levels of melanin and purinergic enzymes were also measured. The production of reactive oxygen species (ROS) and nitric oxide (NO) was determined as a measure of oxidative state. Treatment with nano-liposome containing alpha-arbutin induced a significant 68.4% cytotoxicity, similar to the positive control, in the B16-F10 murine melanoma cell line at 72 hr. Further, arbutin and liposomes containing alpha-arbutin increased levels of ROS and nitrite formation at 72 hr at the highest concentration (100 and 300 µg/ml) of treatments. Arbutin and liposomes containing alpha-arbutin reduced melanin levels at all tested concentrations. In addition, arbutin and alpha-arbutin containing liposomes lowered nucleotides (AMP, ADP, and ATP) and nucleoside (adenosine) levels in melanoma cells. Evidence suggests that α-arbutin containing liposome can be considered as an alternative immunosuppressive agent stimulated in melanoma treatment.

Integrated Metabolomics and Transcriptomics Analyses of the Biosynthesis of Arbutin and 6'-O-Caffeoylarbutin in Vaccinium dunalianum Cell Suspension Cultures Fed with Hydroquinone.

Arbutin and 6'-O-caffeoylarbutin (CA) from Vaccinium dunalianum Wight are known for their ability to inhibit melanin synthesis. To boost the production of arbutin and CA, precursor feeding with hydroquinone (HQ) was studied in V. dunalianum suspension cells. The effect of HQ on the biosynthesis of arbutin and CA in the suspension cells was investigated using high-performance liquid chromatography (HPLC), and possible molecular mechanisms were analyzed using metabolomics and transcriptomics analyses. HPLC analysis only showed that the addition of HQ significantly enhanced arbutin synthesis in cells, peaking at 15.52 ± 0.28 mg·g-1 after 0.5 mmol·L-1 HQ treatment for 12 h. Subsequently, metabolomics identified 78 differential expression metabolites (DEMs), of which arbutin and CA were significantly up-regulated metabolites. Moreover, transcriptomics found a total of 10,628 differential expression genes (DEGs). The integrated transcriptomics and metabolomics revealed that HQ significantly enhanced the expression of two arbutin synthase (AS) genes (Unigene0063512 and Unigene0063513), boosting arbutin synthesis. Additionally, it is speculated that CA was generated from arbutin and 3,4,5-tricaffeoylquinic acid catalyzed by caffeoyl transferase, with Unigene0044545, Unigene0043539, and Unigene0017356 as potentially associated genes with CA synthesis. These findings indicate that the precursor feeding strategy offers a promising approach for the mass production of arbutin and CA in V. dunalianum suspension cells and provides new insights for CA biosynthesis in V. dunalianum.

6'-O-Caffeoylarbutin from Quezui Tea: A Highly Effective and Safe Tyrosinase Inhibitor.

Tyrosinase is vital in fruit and vegetable browning and melanin synthesis, crucial for food preservation and pharmaceuticals. We investigated 6'-O-caffeoylarbutin's inhibition, safety, and preservation on tyrosinase. Using HPLC, we analyzed its effect on mushroom tyrosinase and confirmed reversible competitive inhibition. UV_vis and fluorescence spectroscopy revealed a stable complex formation with specific binding, causing enzyme conformational changes. Molecular docking and simulations highlighted strong binding, enabled by hydrogen bonds and hydrophobic interactions. Cellular tests showed growth reduction of A375 cells with mild HaCaT cell toxicity, indicating favorable safety. Animal experiments demonstrated slight toxicity within safe doses. Preservation trials on apple juice showcased 6'-O-caffeoylarbutin's potential in reducing browning. In essence, this study reveals intricate mechanisms and applications of 6'-O-caffeoylarbutin as an effective tyrosinase inhibitor, emphasizing its importance in food preservation and pharmaceuticals. Our research enhances understanding in this field, laying a solid foundation for future exploration.

Hypolipidemic and Antithrombotic Effect of 6'-O-Caffeoylarbutin from Vaccinium dunalianum Based on Zebrafish Model, Network Pharmacology, and Molecular Docking.

Vaccinium dunalianum leaf buds make one of the most commonly used herbal teas of the Yi people in China, which is used to treat articular rheumatism, relax tendons, and stimulates blood circulation in the body. In addition, 6'-O-caffeoylarbutin (CA) is a standardized extract of V. dunalianum, which has been found in dried leaf buds, reaching levels of up to 31.76%. Because of the uncommon phenomenon, it is suggested that CA may have a potential therapeutic role in hyperlipidemia and thrombosis. This study was designed to study the efficacy of CA on treating hyperlipidemia and thrombosis and the possible mechanisms behind these effects. Hyperlipidemia and thrombosis zebrafish models were treated with CA to observe variations of the integrated optical density within the vessels and the intensity of erythrocyte staining within the hearts. The possible mechanisms were explored using network pharmacology and molecular docking. The results demonstrate that CA exhibits an excellent hypolipidemic effect on zebrafish at concentrations ranging from 3.0 to 30.0 µg/mL and shows thrombosis inhibitory activity in zebrafish at a concentration of 30.0 µg/mL, with an inhibition rate of 44%. Moreover, network pharmacological research shows that MMP9, RELA, MMP2, PRKCA, HSP90AA1, and APP are major targets of CA for therapy of hyperlipidemia and thrombosis, and may relate to pathways in cancer, chemical carcinogenesis-receptor activation, estrogen signaling pathway, and the AGE-RAGE signaling pathway in diabetic complications.

Arbutin attenuates CFA-induced arthritis by modulating expression levels of 5-LOX, NF­κB, IL-17, PGE-2 and TNF-α.

Arbutin, a naturally soluble glycosylated phenol has antioxidant, antimicrobial, antitumor and anti-inflammatory properties. The current exploration appraises the treatment of arthritis by use of Arbutin (25, 50 and 100 mg/kg) orally in CFA-induced rat arthritis model. Body weight changes, paw size, and joint diameter were recorded till the 28th day in the arthritic-induced rats. Hematological, biochemical, oxidative and inflammatory biomarkers were measured through the blood samples of anesthetized rats. Arbutin markedly decreased paw volume, PGE-2, anti-CCP and 5-LOX levels, however, maintained metabolic and hematological balance and prevented weight loss. Radiology and histology changes improved significantly in the ankle joints of rats. Moreover, Arbutin increased gene pointers such as IL-10 and IL-4 while significantly reducing the levels of CRP and WBCs, whereas Hb, platelets and RBCs count markedly raised in post-treatments. Antioxidant levels of SOD, CAT and GSH were improved and MDA level was reduced in treated groups. Rt-PCR investigation showed a significant reduction of the interleukin-1ß, TNF-α, interleukin-6, cyclooxygenase-2, NF-κB and IL-17 and increased expression of gene pointers like IL-4, and IL-10 in treated groups. Assessment of molecular docking revealed a strong binding interaction of Arbutin against 5-LOX, IL-17, TNF-alpha and interleukin-6, cyclooxygenase-2, nuclear factor-κB, IL-4 and iNOS providing a strong association between experimental and theoretical results. As a result, Arbutin has significantly reduced CFA-induced arthritis by modulation of anti-inflammatory cytokines, i.e., IL-10 and IL-4, the pro-inflammatory cytokines panel such as NF-κB, TNF-alpha, IL-1ß, IL-6, PGE-2, 5-LOX and COX-2 and oxidative biomarkers.

The Effect of α-Arbutin on UVB-Induced Damage and Its Underlying Mechanism.

Ultraviolet radiation can heighten tyrosinase activity, stimulate melanocyte production, impede the metabolism of numerous melanocytes, and result in the accumulation of plaques on the skin surface. α-Arbutin, a bioactive substance extracted from the arbutin plant, has been widely used for skin whitening. In this study, the whitening effect of α-arbutin by inhibiting tyrosinase activity and alleviating the photoaging effect induced by UVB are investigated. The results indicate that α-arbutin can inhibit skin inflammation, and its effectiveness is positively correlated with concentration. Moreover, α-arbutin can reduce the skin epidermal thickness, decrease the number of inflammatory cells, and down-regulate the expression levels of IL-1ß, IL-6 and TNF-α, which are inflammatory factors. It also promotes the expression of COL-1 collagen, thus playing an important role in anti-inflammatory action. Network pharmacology, metabolomics and transcriptomics further confirm that α-arbutin is related to the L-tyrosine metabolic pathway and may interfere with various signaling pathways related to melanin and other photoaging by regulating metabolic changes. Therefore, α-arbutin has a potential inhibitory effect on UVB-induced photoaging and possesses a whitening effect as a cosmetic compound.

Protective Effect of Que Zui Tea on d-Galactose-Induced Oxidative Stress Damage in Mice via Regulating SIRT1/Nrf2 Signaling Pathway.

Que Zui tea (QT) is an important herbal tea in the diet of the 'Yi' people, an ethnic group in China, and it has shown significant antioxidant, anti-inflammatory, and hepatoprotective effects in vitro. This study aims to explore the protective effects of the aqueous-ethanol extract (QE) taken from QT against ᴅ-galactose (ᴅ-gal)-induced oxidative stress damage in mice and its potential mechanisms. QE was identified as UHPLC-HRMS/MS for its chemical composition and possible bioactive substances. Thus, QE is rich in phenolic and flavonoid compounds. Twelve compounds were identified, the main components of which were chlorogenic acid, quinic acid, and 6'-O-caffeoylarbutin. Histopathological and biochemical analysis revealed that QE significantly alleviated brain, liver, and kidney damage in ᴅ-gal-treated mice. Moreover, QE remarkably attenuated oxidative stress by activating the Nrf2/HO-1 pathway to increase the expression of antioxidant indexes, including GSH, GSH-Px, CAT, SOD, and T-AOC. In addition, QE administration could inhibit the IL-1ß and IL-6 levels, which suppress the inflammatory response. QE could noticeably alleviate apoptosis by inhibiting the expressions of Caspase-3 and Bax proteins in the brains, livers, and kidneys of mice. The anti-apoptosis mechanism may be related to the upregulation of the SIRT1 protein and the downregulation of the p53 protein induced by QE in the brain, liver, and kidney tissues of mice. Molecular docking analysis demonstrated that the main components of QE, 6'-O-caffeoylarbutin, chlorogenic acid, quinic acid, and robustaside A, had good binding ability with Nrf2 and SIRT1 proteins. The present study indicated that QE could alleviate ᴅ-gal-induced brain, liver and kidney damage in mice by inhibiting the oxidative stress and cell apoptosis; additionally, the potential mechanism may be associated with the SIRT1/Nrf2 signaling pathway.

Preparation and efficacy verification of three-dimensional printed partitioned multi-effect precision-care gel facial mask.

OBJECTIVE: A partition multi-effect precision-care gel facial mask conforming to facial skin characteristics was prepared using three-dimensional (3D) printing technology. METHODS: First, the hydrogel matrix and humectant of a 3D-printed gel for facial masks were screened, and three 3D-printed gels of arbutin, hexapeptide, and salicylic acid were prepared with whitening, wrinkle removal, and oil control functions, respectively. Skin irritation tests were performed on the gels. Physicochemical properties such as pH, heat and cold tolerance were evaluated. The efficacy of three 3D-printed gels was assessed by measuring melanin value, wrinkle depression score, and oil secretion. Finally, the facial mask model design and printing parameters were studied, and a partition multi-effect precision-care gel facial mask was printed in line with facial skin characteristics. RESULTS: For the 3D-printed facial mask, the gel prescription with 2% hydroxyethyl cellulose gel as matrix and 7% glycerol as humectant was the best. The prepared 3D-printed gel did not irritate the human skin, and its physicochemical properties met the Chinese facial mask industry standard (QB/T2872-2017). We showed that three types of 3D-printed gels containing arbutin, hexapeptide, and salicylic acid could be applied to the corresponding parts of the face to solve different problems, such as facial skin dullness, wrinkles, and oil secretion. Therefore, according to facial physiological characteristics, the facial mask model was designed for the forehead and nasolabial fold, which needs to be anti-wrinkled; the cheek, which needs to be whitened; and the nose and chin, which need oil control. The optimal printing parameters were 0.26 mm nozzle diameter, 90 mm/s printing speed, 30% filling density, 140% wire extrusion ratio, and 0.25 mm layer height. Different skin care effects can be achieved using a three-nozzle printer to print arbutin, hexapeptide, or salicylic acid gel on the mask's forehead and nasolabial fold, cheek, and nose and chin, respectively. CONCLUSION: The 3D-printed partition multi-effect care gel facial mask prepared according to the skin features of different parts of the face can overcome the problem of the single skincare effect of the mass-produced facial masks.

OBJECTIF: Un masque facial de soin de précision en gel à effets multiples, adapté aux caractéristiques de la peau du visage, a été préparé à l'aide de la technologie d'impression tridimensionnelle (3D). MÉTHODES: Tout d'abord, la matrice d'hydrogel et l'humectant d'un gel imprimé en 3D pour les masques faciaux ont été sélectionnés, et trois gels imprimés en 3D d'arbutine, d'hexapeptide et d'acide salicylique ont été préparés avec des fonctions de blanchiment, d'élimination des rides et de contrôle du sébum, respectivement. Des tests d'irritation cutanée ont été réalisés sur les gels. Les propriétés physicochimiques telles que le pH et la tolérance à la chaleur et au froid ont été évaluées. L'efficacité des trois gels imprimés en 3D a été évaluée en mesurant la valeur de la mélanine, le score de dépression des rides et la sécrétion de sébum. Enfin, la conception du modèle de masque facial et les paramètres d'impression ont été étudiés, et un masque facial de gel de soin de précision à effets multiples a été imprimé en fonction des caractéristiques de la peau du visage. RÉSULTATS: Pour le masque facial imprimé en 3D, la prescription de gel avec 2 % de gel d'hydroxyéthylcellulose comme matrice et 7 % de glycérol comme humectant était la meilleure. Le gel imprimé en 3D n'a pas irrité la peau humaine et ses propriétés physicochimiques sont conformes à la norme industrielle chinoise relative aux masques faciaux (QB/T2872­2017). Nous avons montré que trois types de gels imprimés en 3D contenant de l'arbutine, de l'hexapeptide et de l'acide salicylique pouvaient être appliqués aux parties correspondantes du visage pour résoudre différents problèmes, tels que l'aspect terne de la peau du visage, les rides et la sécrétion de sébum. Par conséquent, en fonction des caractéristiques physiologiques du visage, le modèle de masque facial a été conçu pour le front et le sillon nasogénien, qui doivent être antirides, la joue, qui doit être blanchie, et le nez et le menton, qui ont besoin d'un contrôle du sébum. Les paramètres d'impression optimaux étaient les suivants : diamètre de buse de 0,26 mm, vitesse d'impression de 90 mm/s, densité de remplissage de 30 %, rapport d'extrusion du fil de 140 % et hauteur de couche de 0,25 mm. Différents effets de soin de la peau peuvent être obtenus en utilisant une imprimante à trois buses pour imprimer de l'arbutine, de l'hexapeptide ou du gel d'acide salicylique sur le front et le sillon nasogénien, la joue, le nez et le menton du masque, respectivement. CONCLUSION: Le masque facial en gel de soin à effets multiples imprimé en 3D et préparé en fonction des caractéristiques de la peau des différentes parties du visage peut résoudre le problème de l'effet de soin unique des masques faciaux produits en masse.

Metabolomic analysis and bioactivities of Arbutus unedo leaves harvested across the seasons in different natural habitats of Sardinia (Italy).

BACKGROUND: Arbutus unedo L. is a wild tree of Mediterranean regions used as food and in traditional medicine and important for afforestation programs. There is no detailed information available on the variation of A. unedo leaves metabolome across the seasons. The leaves were analyzed by Proton nuclear magnetic resonance (1 H NMR)-based metabolomics, comparing samples harvested across the seasons and in ten different natural habitats of Sardinia (Italy). RESULTS: Multivariate analysis showed the impact of seasonal variation on the metabolome: glucose and quinic acid increased in summer, while in spring sucrose was accumulated. ß-Arbutin, the main known active principle of A. unedo, generally reached the highest concentration in autumn. In winter, O-ß-methylglucose, γ-aminobutyric acid (GABA), flavonols (quercetin-3-O-α-rhamnoside, myricetin-3-O-α-rhamnoside, kaempferol-3-O-α-rhamnoside), catechin, and gallocatechin increased. Characteristic metabolomic features were found also for samples collected in different locations. For instance, trees growing at the highest altitude and exposed to lower temperatures produced less flavonols and catechins. The only sample collected on trees growing on limestones, dolomites, and dolomitic limestones type of soil showed generally the highest content of arbutin. The highest phenolics content was found during spring, while samples collected on flowering branches in winter were the ones with the highest flavonoid content. The antioxidant activity was also variated, ranging from 1.3 to 10.1 mg of Trolox equivalents (TE)/mL of extract, and it was positively correlated to both total phenolics and flavonoid content. Winter samples showed the lowest antibacterial activity, while summer and autumn ones exhibited the highest activity (IC50 values ranging from 17.3 to 42.3 µg/mL against Staphylococcal species). CONCLUSION: This work provides 1 H-NMR fingerprinting of A. unedo leaves, elucidating the main metabolites and their variations during seasons. On the basis of arbutin content, autumn could be considered the balsamic period of this taxon. Samples collected in this season were also the most active ones as antibacterial. Moreover, an interesting metabolomic profile enriched in catechins and flavonols was observed in leaves collected in winter on flowering branches which were endowed with high antioxidant potential.

The protective effect of arbutin against potassium bromate-induced oxidative damage in the rat brain.

This study aimed to investigate the protective effects of arbutin (ARB) against brain injury induced in rats with potassium bromate (KBrO3 ). The rats were divided into four groups as Group 1: Control (0.9% NaCl ml/kg/day p.), Group 2: KBrO3 (100 mg/kg (gavage), Group 3: ARB (50 mg/kg/day p.), and Group 4: KBrO3 + ARB (100 mg/kg (gavage) + 50 mg/kg/day p.). At the end of the fifth day of the study, the rats in all groups were killed, and their brain tissues were collected. In the collected brain tissues, malondialdehyde (MDA), superoxide dismutase (SOD), and catalase (CAT) levels were measured, and routine histopathological examinations were made. The MDA levels in the group that was exposed to KBrO3 were significantly higher than those in the control group (p ˂ 0.001). In comparison to the KBrO3 group, the MDA levels in the KBrO3 + ARB group were significantly lower (p ˂ 0.001). It was observed that SOD and CAT enzyme activity levels were significantly lower in the KBrO3 group compared to the control group (p ˂ 0.001), while these levels were significantly higher in the KBrO3 + ARB group than in the KBrO3 group (p ˂ 0.001). Additionally, the group that was subjected to KBrO3 toxicity, as well as ARB administration, had much lower levels of histopathologic signs than the group that was subjected to KBrO3 toxicity only. Consequently, it was found that KBrO3 exposure led to injury in the brain tissues of the rats, and using ARB was effective in preventing this injury.

Research progress and application of enzymatic synthesis of glycosyl compounds.

Glucoside compounds are widely found in nature and have garnered significant attention in the medical, cosmetics, and food industries due to their diverse pharmaceutical properties, biological activities, and stable application characteristics. Glycosides are mainly obtained by direct extraction from plants, chemical synthesis, and enzymatic synthesis. Given the challenges associated with plant extraction, such as low conversion rates and the potential for environmental pollution with chemical synthesis, our review focuses on enzymatic synthesis. Here, we reviewed the enzymatic synthesis methods of 2-O-α-D-glucopyranosyl-L-ascorbic acid (AA-2G), 2-O-α-D-glucosyl glycerol (α-GG), arbutin and α-glucosyl hesperidin (Hsp-G), and other glucoside compounds. The types of enzymes selected in the synthesis process are comprehensively analyzed and summarized, as well as a series of enzyme transformation strategies adopted to improve the synthetic yield. KEY POINTS: • Glycosyl compounds have applications in the biomedical and food industries. • Enzymatic synthesis converts substrates into products using enzymes as catalysts. • Substrate bias and specificity are key to improving substrate conversion.

Combinatorial metabolic engineering enables high yield production of α-arbutin from sucrose by biocatalysis.

α-Arbutin has been widely used as a skin-whitening ingredient. Previously, we successfully produced α-arbutin via whole-cell biocatalysis and found that the conversion rate of sucrose to α-arbutin was low (~45%). To overcome this issue, herein, we knocked out the genes of enzymes related to the sucrose hydrolysis, including sacB, sacC, levB, and sacA. The sucrose consumption was reduced by 17.4% in 24 h, and the sucrose conversion rate was increased to 51.5%. Furthermore, we developed an inducible protein degradation system with Lon protease isolated from Mesoplasma florum (MfLon) and proteolytic tag to control the PfkA activity, so that more fructose-6-phosphate (F6P) can be converted into glucose-1-phosphate (Glc1P) for α-arbutin synthesis, which can reduce the addition of sucrose and increase the sucrose conversion efficiency. Finally, the pathway of F6P to Glc1P was enhanced by integrating another copy of glucose 6-phosphate isomerase (Pgi) and phosphoglucomutase (PgcA); a high α-arbutin titer (~120 g/L) was obtained. The sucrose conversion rate was increased to 60.4% (mol/mol). In this study, the substrate utilization rate was boosted due to the attenuation of its hydrolysis and the assistance of the intracellular enzymes that converted the side product back into the substrate for α-arbutin synthesis. This strategy provides a new idea for the whole-cell biocatalytic synthesis of other products using sucrose as substrate, especially valuable glycosides.Key points The genes of sucrose metabolic pathway were knocked out to reduce the sucrose consumption. The by-product fructose was reused to synthesize α-arbutin. The optimized whole-cell system improved sucrose conversion by 15.3%.

High-yield production of ß-arbutin by identifying and eliminating byproducts formation.

ß-Arbutin is a plant-derived glycoside and widely used in cosmetic and pharmaceutical industries because of its safe and effective skin-lightening property as well as anti-oxidant, anti-microbial, and anti-inflammatory activities. In recent years, microbial fermentation has become a highly promising method for the production of ß-arbutin. However, this method suffers from low titer and low yield, which has become the bottleneck for its widely industrial application. In this study, we used ß-arbutin to demonstrate methods for improving yields for industrial-scale production in Escherichia coli. First, the supply of precursors phosphoenolpyruvate and uridine diphosphate glucose was improved, leading to a 4.6-fold increase in ß-arbutin production in shaking flasks. The engineered strain produced 36.12 g/L ß-arbutin with a yield of 0.11 g/g glucose in a 3-L bioreactor. Next, based on the substrate and product's structural similarity, an endogenous O-acetyltransferase was identified as responsible for 6-O-acetylarbutin formation for the first time. Eliminating the formation of byproducts, including 6-O-acetylarbutin, tyrosine, and acetate, resulted in an engineered strain producing 43.79 g/L ß-arbutin with a yield of 0.22 g/g glucose in fed-batch fermentation. Thus, the yield increased twofold by eliminating byproducts formation. To the best of our knowledge, this is the highest titer and yield of ß-arbutin ever reported, paving the way for the industrial production of ß-arbutin. This study demonstrated a systematic strategy to alleviate undesirable byproduct accumulation and improve the titer and yield of target products. KEY POINTS: • A systematic strategy to improve titer and yield was showed • Genes responsible for 6-O-acetylarbutin formation were firstly identified • 43.79 g/L ß-arbutin was produced in bioreactor, which is the highest titer so far.

Distinctive Arbutin-Containing Markers: Chemotaxonomic Significance and Insights into the Evolution of Proteaceae Phytochemistry.

Natural products isolation studies of eight endemic Tasmanian Proteaceae species - Agastachys odorata, Persoonia juniperina, Hakea megadenia, Hakea epiglottis, Orites diversifolius, Orites acicularis, Orites revolutus, and Telopea truncata - and three endemic Australian Proteaceae species Banksia serrata, Banksia praemorsa, and Banksia marginata were undertaken. Two previously unreported glycoside-derived natural products were identified, in addition to four other tremendously rare arbutin esters. The results of this study provide further evidence consistent with the proposal that these distinctive arbutin esters represent markers that can provide valuable insights into the chemical evolution of plant species within the family Proteaceae.