Recombinant bone matrix maintains the graft space, induces vascularized bone regeneration and preserves canine tooth extraction socket structure.

AIM: Recombinant bone matrix (RBM) is a newly conceived and engineered porous bone graft granule of average size 600 µm composed of purified recombinant collagen peptide. We sought to examine the behaviour with time of RBM that was grafted in the canine tooth extraction socket. MATERIALS AND METHODS: The canine tooth extraction socket of the hemisectioned mandibular third premolar distal root was grafted with RBM granules, whereas the opposite side extraction socket served as non-grafted control. The mandibular samples were harvested at 1, 3 and 6 months of healing and subjected to micro-CT imaging and decalcified paraffin-embedded histology. Separately, the effect of RBM was compared with that of deproteinized cancellous bovine bone (DCBB) and bovine atelocollagen plug (BACP) in the canine tooth extraction model at 3 months of healing. RESULTS: RBM maintained the grafted space in the socket and the gingival connective tissue until new bone was formed within its porous space. The regenerated bone was highly vascularized and continued to mature, while RBM was completely bioresorbed by 6 months. The buccal and lingual alveolar ridge heights of the RBM-grafted extraction socket was better preserved than those of non-grafted control sockets. The degree of socket preservation by RBM was equivalent to that by DCBB, although their healing mechanisms were different. CONCLUSIONS: This study demonstrated that RBM induced controlled active bone regeneration and preserved the extraction socket structure in a canine model. Bioresorbable RBM engineered without animal or human source materials presents a novel bone graft category with robust bone regenerative property.

Effects of implant placement timing and type of soft-tissue grafting on histological and histomorphometric outcomes in a preclinical canine model.

AIM: To determine the effects of implant timing and type of soft-tissue grafting on histological and histomorphometric outcomes in a preclinical model. MATERIALS AND METHODS: Four implant placement protocols were randomly applied at the mesial root sites of the third and fourth mandibular premolars in 10 mongrel dogs: immediate placement (group IP), early placement (group EP), delayed placement with/without alveolar ridge preservation (groups ARP and DP, respectively). A connective-tissue graft (CTG) or porcine-derived volume-stable collagen matrix (VCMX) was applied to enhance the ridge profile (simultaneously with implant placement in group IP and staged for others), resulting in five sites for each combination. All dogs were sacrificed 3 months after soft-tissue grafting. Histological and histomorphometric analyses were performed, and the data were analysed descriptively. RESULTS: CTG and VCMX were difficult to differentiate from the augmented area. The median total tissue thickness on the buccal aspect of the implant was largest in group IP/CTG (between 2.78 and 3.87 mm). The soft-tissue thickness was generally favourable with CTG at all implant placement timings. Within the DP groups, CTG yielded statistically significantly larger total and soft-tissue thickness than VCMX (p < .05). Among the groups with VCMX, group EP/VCMX showed the largest soft-tissue thickness at apical levels to the implant shoulder. CONCLUSIONS: CTG generally led to greater tissue thickness than VCMX.

Histological and histomorphometric analysis of bone tissue using customized titanium meshes with or without resorbable membranes: A randomized clinical trial.

OBJECTIVES: To date, no clinical studies have investigated the effect of using resorbable collagen membrane in conjunction with customized titanium mesh to promote bone formation in guided bone regeneration. Therefore, a non-inferiority analysis (one-sided 95% CI approach) was designed to compare the augmented bone gained using meshes with and without collagen membranes, through histological and histomorphometric investigations. MATERIALS AND METHODS: Thirty patients undergoing bone augmentation procedures at both maxillary and mandible sites were randomly treated with customized titanium meshes alone (M-, n = 15) or covered with resorbable membrane (M+, n = 15), in both cases filled with autogenous bone and xenograft. After 6 months of healing, bone tissue biopsies were taken from the augmented region. The bone tissue (B.Ar), grafting material (G.Ar), and non-mineralized tissue (NMT.Ar) areas were quantified through histomorphometric analysis, as were the osteoid area (O.Ar) and its width. RESULTS: Collagen membrane did not appear to significantly influence the investigated parameters: B.Ar, G.Ar, NMT.Ar, and O.Ar were similar between Group M- (34.3%, 11.5%, 54.1%, 1.95 µm2 , respectively) and Group M+ (35.3%, 14.6%, 50.2%, and 1.75 µm2 , respectively). Considering the overall population, significantly higher rates of newly formed bone were obtained in mandibular sites, while non-mineralized and dense connective tissue rates were higher in the maxilla (p < .05). CONCLUSIONS: The application of collagen membrane over titanium mesh did not lead to significant results. Bone formation appeared significantly different in the maxilla compared with the mandible. Additional studies are required to further investigate the issues observed.

Ridge preservation in periodontally compromised molar sockets with and without primary wound closure: A comparative controlled clinical trial.

OBJECTIVE: This study aimed to compare hard- and soft-tissue changes after ridge preservation in periodontally compromised molar sockets with and without primary wound closure. MATERIALS AND METHODS: Forty molars with severe periodontitis requiring extraction were included and allocated to two treatment modalities. After tooth extraction, the sockets were filled with deproteinized bovine bone mineral and covered with a bioabsorbable porcine collagen membrane. Primary wound closure was achieved in the control group, whereas the test group underwent minimally invasive open healing. The dimensions of the bone and soft tissue were recorded at baseline and 6 months. RESULTS: Over 6 months, the control and test groups had similar mean ridge heights at the center of sockets of 8.59 ± 2.47 mm and 8.47 ± 2.51 mm, respectively. The total volume of the control group increased from 1070.17 to 1713.52 mm3 for a mean gain of 643.35 mm3 , whereas that of the test group increased from 992.51 to 1514.05 mm3 for a mean gain of 521.54 mm3 . Compared with the test group, the control group showed a statistically significant decrease in keratinized tissue width of 1.08 ± 1.63 mm. CONCLUSIONS: Bone dimensional changes following ridge preservation with and without primary wound closure were comparable. ARP without primary wound closure preserves more keratinized tissue than that with (Chinese Clinical Trial Registry: ChiCTR-ONN-16009433).

Ridge preservation using a self-retaining block type bone substitute for extraction sockets with buccal dehiscence defects - A preclinical study.

OBJECTIVE: To evaluate the effect of a self-retaining block-type bone substitute (srBB) on the dimensional stability of the horizontal ridge width at the coronal level in a buccal dehiscence model. MATERIALS AND METHODS: Four box-shaped bone defects with a buccal dehiscence were surgically prepared in the partially edentulous mandible (n = 6). Experimental biomaterials were randomly assigned to each site: (1) Control group: no treatment, (2) particle-type bone substitute (PBS) group, (3) collagenated soft block bone substitute (csBB) group, and (4) self-retaining synthetic block bone (srBB) group. In all grafted groups, a collagen membrane covered the biomaterials. At 16 weeks, clinical, histological, and radiographic analyses were performed. RESULTS: Three of the six blocks in the srBB group became exposed and fell out during the first week after surgery. Therefore, the remaining three specimens were renamed RsrBB group. The RsrBB group showed an increase horizontal ridge compared to the pristine bone width at 2-4 mm below the CEJ, while the other groups showed resorption (augmented width at 2 mm below: 4.2, 42.4, 36.2, and 110.1% in the control, PBS, csBB, and RsrBB groups, respectively). The mineralized bone area was largest in the RsrBB group (4.74, 3.44, 5.67, and 7.77 mm2 in the control, PBS, csBB, and RsrBB groups, respectively.). CONCLUSIONS: The srBB group demonstrated the highest volume stability at the coronal level. These findings would potentially suggest that self-retaining block bone substitute might be a good candidate for alveolar ridge preservation.

Guided bone regeneration for peri-implant augmentation: A retrospective study comparing two surgical techniques with a mean follow-up of 26 months.

OBJECTIVES: To introduce a modified guided bone regeneration (GBR) technique using intact periosteum and deproteinized bovine bone mineral (DBBM) for peri-implant augmentation and compare the clinical outcomes with those of conventional GBR. MATERIALS AND METHODS: Patients who received peri-implant augmentation in posterior sites between 2015 and 2021 were reviewed in this study. Group A was treated with a modified GBR technique, and Group B was treated with conventional GBR. For group comparison, propensity score matching was performed with a sensitivity analysis. The implant survival rate, dimensional changes in hard tissue, marginal bone loss (MBL), and peri-implant parameters were evaluated. RESULTS: In total, 114 implants from 98 patients were included. The implant survival rates were 95.74% in Group A and 95.00% in Group B during the follow-up period. At 6 months, the median horizontal thickness was recorded at 0.87 mm (IQ1-IQ3 = 0.00-1.75 mm) in Group A, exhibiting a relatively lower value compared to the corresponding measurement of 0.98 mm (IQ1-IQ3 = 0.00-1.89 mm) in Group B (p = .937). Vertical height displayed no statistically significant intergroup difference between the two groups (p = .758). The mean follow-up period was 25.83 ± 12.93 months after loading in Group A and 27.47 ± 21.29 months in Group B (p = .761). MBL and peri-implant parameters were comparable between the two groups. CONCLUSIONS: Within the limitations of this study, the modified GBR technique using intact periosteum and DBBM grafting might be a viable alternative to correct bone defects around implants in molar and premolar sites.

Histological and radiological outcome after horizontal guided bone regeneration with bovine bone mineral alone or in combination with bone in edentulous atrophic maxilla: A randomized controlled trial.

OBJECTIVE: To assess the radiological and histological outcome after horizontal guided bone regeneration (GBR) with deproteinized bovine bone mineral (DBBM) alone or in combination with particulate autogenous bone (PAB). MATERIALS AND METHODS: Eighteen edentulous patients with an alveolar ridge of ≤4 mm were included in this split-mouth randomized controlled trial. Horizontal GBR with a graft composition of 100% DBBM (100:0) on one side and 90% DBBM and 10% PAB (90:10) on the other side were conducted in all patients. Cone beam computed tomography (CBCT) was obtained preoperatively, immediately postoperative, and after 10 months of healing. Width and volumetric changes in the alveolar process were measured on CBCT. Implants were placed after 10 months of graft healing where biopsies were obtained for histomorphometrical evaluation. RESULTS: The gained widths were 4.9 (±2.4) mm (100:0) and 4.5 (±2.0) mm (90:10) at 3 mm from the top of the crest, and 5.6 (±1.3) mm (100:0) and 4.6 (±2.1) mm (90:10) at 6 mm from the top of the crest. The mean volumetric reductions were 32.8% (±23.8) (100:0) and 38.2% (±23.2) (90:10). Histomorphometry revealed that mean percentages of bone were 50.8% (±10.7) (100:0) and 46.4% (±11.3) (90:10), DBBM were 31.6% (±12.6) (100:0) and 35.4% (±14.8) (90:10), and non-mineralized tissue were 17.6% (±11.7; 100:0) and 18.2% (±18.2) (90:10). No significant differences were evident between in any evaluated parameters. CONCLUSIONS: There were no additional effects of adding PAB to DBBM regarding bone formation, width changes, or volumetric changes after 10 months of graft healing.

Evaluating risk factors and complications in mandibular ramus block grafting: a retrospective cohort study.

OBJECTIVES: This retrospective cohort study aimed to identify the complications and risk factors associated with alveolar grafting using autologous mandibular ramus grafts, guided by the research question: What are the complications encountered in patients undergoing alveolar bone grafting using autologous mandibular ramus block and what are the risk factors associated with the development of these complications? MATERIALS AND METHODS: The study included 70 patients who underwent alveolar crest augmentation with autologous mandibular ramus block grafting. Intraoperative, early postoperative, and late postoperative complications were analyzed, as were various risk factors. RESULTS: The results showed that the majority of patients had successful outcomes with minimal complications. Sex was found to significantly influence the visibility of the inferior alveolar nerve (IAN). Early postoperative complications were associated with IAN visibility and the use of a single screw for graft fixation. Late postoperative complications were significantly associated with the presence of infection. CONCLUSION: The findings emphasize the importance of careful surgical techniques, infection prevention, and patient selection in minimizing complications. CLINICAL RELEVANCE: This article may contribute to clinicians' and so patients' understanding of potential risk factors associated with over all ramus block grafting procedure. Based on this information, clinicians can also improve their ability to manage risk factors and associated complications and compare ramus block grafting with other alternatives to determine the best treatment approach for that particular patient.

Alveolar ridge splitting and simvastatin loaded xenograft for guided bone regeneration and simultaneous implant placement: randomized controlled clinical trial.

OBJECTIVES: The present study goal was to assess clinically and radiographically using simvastatin (SMV) loaded xenograft for guided bone regeneration (GBR) around simultaneously placed implants with alveolar ridge splitting in patients with horizontally atrophic jaw defect. MATERIALS AND METHODS: Randomized distribution of the twenty-two patients into two groups (11 patients each) was performed. Group I participants received alveolar ride splitting (ARS) with GBR using SMV gel mixed bone graft and a barrier membrane with simultaneous implant placement. Group II received the same treatment protocol without SMV gel. At the baseline, 6- and 9-months post-surgery, clinical and radiological alterations were assessed. RESULTS: Six months after therapy, PES records of group I were statistically significantly improved than those of group II (P < .001). Group I exhibited statistically significant expansion of the alveolar ridge over group II after 6 and 9 months (P < .001). When compared to group II over the evaluation interval between 6 and 9 months, group I demonstrated statistically substantially minimal loss of the mean marginal bone level (P < .001). At the 6- and 9-month observation periods, bone density gain was considerably higher in group I than that in group II (P < .001). CONCLUSION: Alveolar ridge splitting along with GBR-augmented SMV improve the clinical and radiographical outcomes around dental implant over GBR alone. CLINICAL RELEVANCE: Augmenting GBR with SMV in alveolar ridge splitting could boost implant osseointegration and enhance peri-implant tissue changes. CLINICAL TRIAL REGISTRATION: NCT05020405.

Peri-Implant Mucosal Fenestration and Histologic Observation of Bone Xenograft Material 7-Years After Implant Installation: A Case Report.

Bone augmentation is often required before the installation of dental implants. Here, we report a case for a patient who previously received bone augmentation at the upper right jaw using a xenogenic graft, followed by successful implant installation. Seven years later, the patient presented with mucosal fenestration with bone exposure at the area and gave a history of a recent diagnosis of cutaneous lichen planus. Several attempts were made to manage the situation, and finally, we resorted to connective tissue graft placement at the site. A piece of bone was sent for histologic evaluation, where the results indicated the presence of un-resorbed graft material surrounded by inflammatory cells, with no evidence of bone formation in the area. The case presents histologic evidence for the lack of new bone formation using xenograft over the evaluation period. The case also shows lichen planus, a possible cause for oral complication for patients undergoing augmentation and implant installation.

Application of sticky bone combined with concentrated growth factor (CGF) for horizontal alveolar ridge augmentation of anterior teeth: a randomized controlled clinical study.

OBJECTIVE: This study was designed to estimate the effect of sticky bone combined with concentrated growth factor (CGF) on anterior alveolar horizontal augmentation during implantation. METHODS: Twenty-eight patients were randomly assigned to either the test group (Group 1, n = 14) or the control group (Group 2, n = 14). Patients in Group 1 and Group 2 underwent GBR using sticky bone combined with CGF and bone powders mixed with saline, respectively. On postoperative Day 7, the patients completed the visual analogue scale (VAS). Three-dimensional models of maxillary alveolar bone were reconstructed from CBCT data at different periods, and the bone volume conversion rate was calculated with the assistance of a measurement marker guide. Labial bone thickness before and after trauma closure and bone density at six months postoperatively were also measured. RESULTS: The mean bone volume conversion rate for Group 1 (72.09 ± 12.18%) was greater than that for Group 2 (57.47 ± 9.62%, P = 0.002). The VAS score was lower for Group 1 than for Group 2 (P = 0.032). At six months postoperatively, greater bone density was found in patients in Group 1 than in those in Group 2, although the difference was not statistically significant (P > 0.05). The change in the thickness of the labial bone graft material in Group 1 was smaller than that in Group 2 (P = 0.025). CONCLUSION: Sticky bone combined with CGF was able to achieve better bone augmentation than conventional GBR. With excellent mechanical properties and the capacity to release growth factors, sticky bone is an ideal material for bone grafting. TRIAL REGISTRATION: The study was registered at the Chinese Clinical Trial Registry on 10/04/2022 (Identification number: ChiCTR2200058500).

Double layer graft technique for horizontal alveolar ridge augmentation with staged implant placement: radiographic histological and implant stability analysis-a case report.

INTRODUCTION: Horizontal ridge augmentation of a deficient alveolar bone site is performed either simultaneously with implant placement or in a staged approach prior to implant insertion. There are several available strategies for the augmentation of alveolar ridge deficiencies, including guided bone regeneration (GBR) through the use of barrier membranes. The success of the GBR approach mainly depends on the exclusion of soft tissue cells during bone remodeling. CASE PRESENTATION: A healthy 25-year-old male patient presented with a missing upper left central incisor after clinical and radiographic examination, the site showed a class III defect horizontal atrophy. The procedure performed was the horizontal alveolar ridge augmentation using resorbable pericardium membrane with double layer graft technique (DLT) where autogenous bone placed as a first layer of the graft followed by xenograft as a second layer, the membrane was fixed with titanium pins. A cone beam computed tomography (CBCT) was performed before, immediately and 6 month following the surgery. After 6 months during implant placement, a core biopsy specimen was retrieved, stored and prepared for histological evaluation, with assessment of primary implant stability. The radiographic analysis showed a horizontal width gain of about 4 mm, at 6 month following implant placement, the implant was successfully osteointegrated with stability assessment also done after 6 months from placement. CONCLUSION: DLT was successfully used for horizontal alveolar ridge augmentation, thus allowing a prosthetically driven implant placement. More cases assessing implant survival and success are needed to confirm the results of this case report.

The effect of platelet-rich fibrin (PRF) versus freeze-dried bone allograft (FDBA) used in alveolar ridge preservation on the peri-implant soft and hard tissues: a randomized clinical trial.

BACKGROUND: The effectiveness of alveolar ridge preservation on bone regeneration and tissue healing has been thoroughly documented in the literature. This study aimed to evaluate the peri-implant soft and hard tissue changes after alveolar ridge preservation using either platelet-rich fibrin (PRF) or freeze-dried bone allograft (FDBA) over a 12-month period following the prosthetic loading of implants. METHODS: In this randomized clinical trial, 40 individuals were recruited for alveolar ridge preservation using (1) FDBA or (2) PRF in incisal/premolar areas. At two follow-up sessions (six- and 12-months post-implant insertion), radiographic imaging and clinical examinations assessed marginal bone loss and soft tissue factors, including gingival recession and bleeding on probing. The differences between study groups were analyzed using Generalized estimating Equations, the Binary logistic regression model, and Cochran's Q test. RESULTS: There was a statistically significant difference regarding gingival recession at both follow-up evaluations; values in the PRF group were considerably lower compared to the FDBA group (p < 0.05). The mean values for vertical marginal bone loss and bleeding on probing showed no significant differences between the two study groups (p > 0.05). CONCLUSIONS: Except for gingival recession, applying PRF yielded comparable clinical results to FDBA after one year of implant loading and could be recommended as a potential biomaterial for alveolar ridge preservation following tooth extractions. CLINICAL TRIAL REGISTRATION: The research protocol was registered in the Protocol Registration and Results System on 13/08/2021, available at https://clinicaltrials.gov/ (NCT05005377).

Tomographic assessment of bone changes in atrophic maxilla treated by split-crest technique and dental implants with platelet-rich fibrin and NanoBone® versus platelet-rich fibrin alone: Randomized controlled trial.

BACKGROUND: This study evaluated the clinical benefits of adding NanoBone® with split-crest technique and simultaneous implant placement covered with platelet-rich fibrin membrane in horizontally deficient maxillary ridges in terms of crestal and horizontal bone changes and patient morbidity. METHODS: Forty patients indicated for maxillary ridge splitting and simultaneous implant placement were assigned randomly to the study groups: control group (Platelet Rich Fibrin membrane) and test group (Platelet Rich Fibrin membrane + Nanobone®). The Cone Beam Computed Tomography Fusion technique was utilized to assess crestal and horizontal bone changes after five months of the surgical procedure. Patient morbidity was recorded for one week post-surgical. RESULTS: Five months post-surgical, buccal crestal bone resorption was 1.26 ± 0.58 mm for the control group and 1.14 ± 0.63 mm for the test group. Lingual crestal bone resorption was 1.40 ± 0.66 mm for the control group and 1.47 ± 0.68 mm for the test group. Horizontal bone width gain was 1.46 ± 0.44 mm for the control group and 1.29 ± 0.73 mm for the test group. There was no significant statistical difference between study groups regarding crestal and horizontal bone changes and patient morbidity. CONCLUSIONS: The tomographic assessment of NanoBone® addition in this study resulted in no statistically significant difference between study groups regarding crestal and horizontal bone changes and patient morbidity. More randomized controlled clinical trials on gap fill comparing different bone grafting materials versus no grafting should be conducted. GOV REGISTRATION NUMBER: NCT02836678, 13th January 2017.

Atypical histological presentation of bone regeneration after insertion of cryoprotected allogeneic bone graft.

BACKGROUND: To evaluate bone regenerative capacity of cryoprotected corticocancellous allogeneic bone graft performed in type II and III post-extraction sockets for ridge preservation after twelve weeks in-vivo. MATERIAL AND METHODS: Twenty-seven type II or III bony-walled extraction sockets (mandible and maxilla) were selected for this study. Following atraumatic tooth-extraction a cryoprotected corticocancellous allogeneic bone graft material and a resorbable porcine-derived collagen membrane were used for ridge preservation. During re-entry surgery at approximately 12 weeks, bone core biopsies were obtained using a 3.2 mm trephine drill and samples were histologically processed and subjected to qualitative and quantitative histomorphometric analysis. Quantitative data was analyzed using a general linear mixed model with results presented as mean values with the corresponding 95% confidence interval values. RESULTS: Healing without incident and ridge preservation allowed for the placement of dental implants after 12 weeks in 25 out of the 27 treated socket sites. Analyses yielded an average of ~21.0±7% of old/native bone, ~17±5.5% of newly regenerated bone (total of ~38±12.8% for all bone), 0.23±0.14% of new bone presenting with nucleating sites within the matrix, ~52±5.12% of soft tissue, and 3.6±2.09% of damaged bone. The average regenerated bone was statistically analogous to that of old/native bone (p=0.355). Furthermore, an atypical histological pattern of bone regeneration was observed, with newly formed bone exhibiting "infiltration-like" behavior and with new bone nucleating sites observed within the demineralized bone matrix. CONCLUSIONS: Cryoprotected corticocancellous allogeneic bone-graft demonstrated osteoconductive, osteoinductive, and osteogenic properties, yielding unique healing patterns which does warrant further investigation.

Time management in multistep periodontal and implant treatments: a practical guide.

In addition to the proper selection of techniques, appropriate treatment sequencing and prioritization are prerequisites for successful periodontal and implant procedures. The aim of this study was to provide evidence-based time frames for various procedures pertaining to periodontal and implant treatment. A literature review was conducted to collect data on tissue healing; in areas in which data were lacking, the viewpoints of experienced clinicians were solicited to establish a consensus. This review reports recommended time frames for the healing processes associated with surgical crown-lengthening procedures (both functional and esthetic), fresh socket management, alveolar ridge management, soft tissue management, sinus floor augmentation, implant loading, and peri-implant defect management.

Restoring Severely Atrophic Edentulous Ridge of Mandible Using Self-Expanding Tissue Expander-A Case Report.

This report describes the use of Self Inflating Tissue Expanders (SITEs) to rehabilitate severely atrophic edentulous mandibular ridges, enabling successful bone grafting and implant placement. The treatment resulted in stable and complication-free implants over a seven-year follow-up, demonstrating SITEs' effectiveness in providing sufficient bone volume and soft tissue coverage for dental implants.

Clinical and Radiographic Outcomes of Autogenous Inlay Graft vs Autogenous Onlay Graft for Anterior Maxillary Horizontal Ridge Augmentation: A Randomized Control Clinical Study.

AIM: This study aimed to compare the efficacy of autogenous onlay and inlay grafts for anterior maxillary horizontal ridge augmentation. MATERIALS AND METHODS: This randomized clinical trial was performed on 14 patients with a deficient partially edentulous anterior maxillary ridge (3-5 mm in width). Patients were randomized and grouped into two equal groups: Group A was treated with symphyseal autogenous bone block, which was placed and fixed buccally as an onlay graft, and group B: was treated with symphyseal autogenous bone block, which was interpositioned and fixed in space created between buccal and lingual cortex as inlay graft. Patients were evaluated clinically and radiographically to evaluate the increase of bone width at [Baseline, immediate postoperative (T0)] and six months post-graft (T6). RESULTS: A total of 14 patients (8 males and 6 females) with age range from 20 to 43 years old with a mean of 42.1 years were involved in our study. Radiographically, there was a significant statistical difference in comparing between two groups for the creation of a horizontal alveolar bone at T0. In the inlay group, the mean preoperative bone width was 3.9 ± 0.3 mm at T0 and 5.7 ± 0.5 mm at T6. While in the onlay group, the mean preoperative bone width was 3.7 ± 0.7 mm at T0 while at T6 the mean bone width was 6.1 ± 0.8 mm. This was statistically significant. CONCLUSION: Inlay block graft appears to be a successful treatment option for horizontal ridge augmentation in the maxillary arch. CLINICAL SIGNIFICANCE: both techniques are viable techniques for augmentation of atrophic alveolar ridge with uneventful healing. How to cite this article: Elsayed AO, Abdel-Rahman FH, Ahmed WMAS, et al. Clinical and Radiographic Outcomes of Autogenous Inlay Graft vs Autogenous Onlay Graft for Anterior Maxillary Horizontal Ridge Augmentation: A Randomized Control Clinical Study. J Contemp Dent Pract 2024;25(2):107-113.

[Reparative potential of bone tissue and associated influencing factors]. / Reparativnyi potentsial kostnoi tkani i vliyayushchie na nego faktory.

OBJECTIVE: The aim of the sthudy. To study the influence of general and local factors on the regenerative potential of bone tissue to optimize augmentation mechanisms in the treatment of jaw atrophy. MATERIALS AND METHODS: The influence of general and local factors on the regenerative potential of the bone during the augmentation operation of the alveolar process (part) of the jaw in 68 patients was studied. The survival rate of dental implants and the incidence of complications after completion of dental rehabilitation in the long-term follow-up period (more than 5 years) were evaluated. 18 indicators were studied, which were evaluated by qualitative and quantitative methods. The study of the effect of indicators on regeneration was carried out using an accurate Fischer test for conjugacy tables. The assessment of the strength of the influence was calculated as the ratio of the chances of developing an unfavorable outcome of bone grafting and dental implantation. RESULTS: He highest chances of developing adverse outcomes were found in smoking patients with diabetes mellitus, high body mass index, low survival of bone walls, severe bone atrophy (5.6 and higher class according to Cawood & Howell), three-dimensional bone defect, in the absence of 3 or more bone walls, the presence of subcompensated and decompensated psychological state the patient. In the course of histological examination, the influence of these factors on the mechanisms of reparative osteogenesis morphologically manifested a lower degree of progress of regenerative processes and a lower degree of maturity of bone tissue. CONCLUSION: To reduce the chances of developing an unfavorable outcome, in the presence of negative general and local factors, it is not advisable to use dental implantation simultaneously with bone augmentation procedures. In order to reduce the pathophysiological impact of negative factors during sinus lifting, increase the proportion of autosteal material for potentiating the metabolic activity of bone tissue, as well as prescribe antioxidant, antihypoxant and membrane stabilizing therapy before surgery and in the early postoperative period.

[Elimination of defects in the Schneiderian membrane during sinus lift operations]. / Ustranenie defektov membrany Shneidera vo vremya provedeniya operatsii sinus-liftinga.

PURPOSE: Evaluation of the effectiveness of a new method of plasty of an extensive defect in the mucous membrane of the Schneiderian membrane, which occurs during the sinus lift operation, using an artificial collagen membrane and a developed method for fixing it. MATERIAL AND METHODS: A total of 188 patients took part in the study, all of these patients underwent an open sinus lift operation with simultaneous or delayed implantation. Operations were performed under balanced anesthesia. Six months after the operation, according to computed tomography, the height of the formed bone regenerate was estimated. In the area of each missing tooth, the initial bone height and the resulting bone grafting were assessed. Then we compared the average values before and after the operation, the average height difference before and after the operation. RESULTS: In 19 patients during the sinus lift there was an accidental extensive rupture of the mucous membrane of the maxillary sinus. Elimination of the mucosal defect was carried out according to our patented method. All 188 patients were diagnosed with partial loss of teeth with bone tissue deficiency in the distal maxillary sinus. The height of the alveolar process in the projection of missing teeth ranged from 0.5 mm to 5 mm. Delayed dental implantation was performed when the height of the alveolar bone was less than 3 mm, direct when the presence of 3-5 mm. After 6 months, dental implants were installed in the reconstruction zone, after another 6 months - rational prosthetics. CONCLUSIONS: The proposed method of plastic surgery has the following advantages. Firstly, it allows to eliminate the defect of the mucous membrane together with an increase in the height of the alveolar ridge. Secondly, after this method, the integrity of the mucous membrane will be restored. Thirdly, with an alveolar bone height of 3 mm or more, dental implants should also be installed.