Development and validation of an HPLC-DAD method for the quantification of cannabigerol, cannabidiol, cannabinol and cannabichromene in human plasma and mouse matrices.

Cannabigerol, cannabidiol, cannabinol and cannabichromene are non-psychoactive phytocannabinoids, highly present in Cannabis sativa, for which numerous therapeutical applications have been described. However, additional pre-clinical and clinical data, including toxicopharmacokinetic and pharmacodynamic studies, remain required to support their use in clinical practice and new therapeutic applications. To support these studies, a new high performance liquid chromatography technique (HPLC) with diode-array detection (DAD) was developed and validated to quantify these cannabinoids in human plasma and mouse matrices. Sample extraction was accomplished by protein precipitation and double liquid-liquid extraction. Simvastatin and perampanel were used as internal standards in human and mouse matrices, respectively. Chromatographic separation was achieved in 16 min on an InfinityLab Poroshell® 120 C18 column (4.6 mm × 100 mm, 2.7 µm) at 40 °C. A mobile phase composed of water/acetonitrile was pumped with a gradient elution program at 1.0 mL min-1. The technique revealed linearity in the defined concentration ranges with a determination coefficient of over 0.99. Intra and inter-day accuracy and precision values ranged from -14.83 to 13.97% and 1.08 to 13.74%, respectively. Sample stability was assessed to ensure that handling and storage conditions did not compromise analyte concentrations in different matrices. Carry-over was absent and recoveries were over 77.31%. This technique was successfully applied for the therapeutic monitoring of cannabidiol and preliminary pre-clinical studies with cannabigerol and cannabidiol. All samples were within calibration ranges, with the exception of cannabigerol after intraperitoneal administration. This is the first HPLC-DAD technique that simultaneously quantifies cannabinoids in these biological matrices, supporting future pre-clinical and clinical investigations.

The transcriptomic response to cannabidiol of Treponema denticola, a phytocannabinoid-resistant periodontal pathogen.

AIM: The use of cannabis, which contains multiple antimicrobials, may be a risk factor for periodontitis. We hypothesized that multiple oral spirochetes would be phytocannabinoid-resistant and that cannabidiol (CBD) would act as an environmental stressor to which Treponema denticola would respond transcriptionally, thereby providing first insights into spirochetal survival strategies. MATERIALS AND METHODS: Oral spirochete growth was monitored spectrophotometrically in the presence and absence of physiologically relevant phytocannabinoid doses, the transcriptional response to phytocannabinoid exposure determined by RNAseq, specific gene activity fluxes verified using qRT-PCR and orthologues among fully sequenced oral spirochetes identified. RESULTS: Multiple strains of oral treponemes were resistant to CBD (0.1-10 µg/mL), while T. denticola ATCC 35405 was resistant to all phytocannabinoids tested (CBD, cannabinol [CBN], tetrahydrocannabinol [THC]). A total of 392 T. denticola ATCC 35405 genes were found to be CBD-responsive by RNAseq. A selected subset of these genes was independently verified by qRT-PCR. Genes found to be differentially activated by both methods included several involved in transcriptional regulation and toxin control. Suppressed genes included several involved in chemotaxis and proteolysis. CONCLUSIONS: Oral spirochetes, unlike some other periodontal bacteria, are resistant to physiological doses of phytocannabinoids. Investigation of CBD-induced transcriptomic changes provided insight into the resistance mechanisms of this important periodontal pathogen. These findings should be considered in the context of the reported enhanced susceptibility to periodontitis in cannabis users.

Appearance of hexahydrocannabinols as recreational drugs and implications for cannabis drug testing - focus on HHC, HHC-P, HHC-O and HHC-H.

This study investigated the effects of hexahydrocannabinol (HHC) and other unclassified cannabinoids, which were recently introduced to the recreational drug market, on cannabis drug testing in urine and oral fluid samples. After the appearance of HHC in Sweden in 2022, the number of posts about HHC on an online drug discussion forum increased significantly in the spring of 2023, indicating increased interest and use. In parallel, the frequency of false positive screening tests for tetrahydrocannabinol (THC) in oral fluid, and for its carboxy metabolite (THC-COOH) in urine, rose from <2% to >10%. This suggested that HHC cross-reacted with the antibodies in the immunoassay screening, which was confirmed in spiking experiments with HHC, HHC-COOH, HHC acetate (HHC-O), hexahydrocannabihexol (HHC-H), hexahydrocannabiphorol (HHC-P), and THC-P. When HHC and HHC-P were classified as narcotics in Sweden on 11 July 2023, they disappeared from the online and street shops market and were replaced by other unregulated variants (e.g. HHC-O and THC-P). In urine samples submitted for routine cannabis drug testing, HHC-COOH concentrations up to 205 (mean 60, median 27) µg/L were observed. To conclude, cannabis drug testing cannot rely on results from immunoassay screening, as it cannot distinguish between different tetra- and hexahydrocannabinols, some being classified but others unregulated. The current trend for increased use of unregulated cannabinols will likely increase the proportion of positive cannabis screening results that need to be confirmed with mass spectrometric methods. However, the observed cross-reactivity also means a way to pick up use of new cannabinoids that otherwise risk going undetected.

Examining the hepatotoxic potential of cannabidiol, cannabidiol-containing hemp extract, and cannabinol at consumer-relevant exposure concentrations in primary human hepatocytes.

Hemp extracts and consumer products containing cannabidiol (CBD) and/or other phytocannabinoids derived from hemp have entered the marketplace in recent years. CBD is an approved drug in the United States for the treatment of certain seizure disorders. While effects of CBD in the liver have been well characterized, data on the effects of other cannabinoids and hemp extracts in the liver and methods for studying these effects in vitro are limited. This study examined the hepatotoxic potential of CBD, CBD concentration-matched hemp extract, and cannabinol (CBN), at consumer-relevant concentrations determined by in silico modeling, in vitro using primary human hepatocytes. Primary human hepatocytes exposed to between 10-nM and 25-µM CBD, CBN, or hemp extract for 24 and 48 h were evaluated by measuring lactate dehydrogenase release, apoptosis, albumin secretion, urea secretion, and mitochondrial membrane potential. Cell viability was not significantly affected by CBD, CBN, or the hemp extract at any of the concentrations tested. Exposure to hemp extract induced a modest but statistically significant decrease in albumin secretion, urea secretion, and mitochondrial membrane potential at the highest concentration tested whereas CBD only induced a modest but statistically significant decrease in albumin secretion compared with vehicle control. Although this study addresses data gaps in the understanding of cannabinoid hepatoxicity in vitro, additional studies will be needed to determine how these results correlate with relevant consumer exposure and the biological effects of cannabinoids in human liver.

Axially Chiral Cannabinoids: Design, Synthesis, and Cannabinoid Receptor Affinity.

The resorcinol-terpene phytocannabinoid template is a privileged scaffold for the development of diverse therapeutics targeting the endocannabinoid system. Axially chiral cannabinols (axCBNs) are unnatural cannabinols (CBNs) that bear an additional C10 substituent, which twists the cannabinol biaryl framework out of planarity creating an axis of chirality. This unique structural modification is hypothesized to enhance both the physical and biological properties of cannabinoid ligands, thus ushering in the next generation of endocannabinoid system chemical probes and cannabinoid-inspired leads for drug development. In this full report, we describe the philosophy guiding the design of axCBNs as well as several synthetic strategies for their construction. We also introduce a second class of axially chiral cannabinoids inspired by cannabidiol (CBD), termed axially chiral cannabidiols (axCBDs). Finally, we provide an analysis of axially chiral cannabinoid (axCannabinoid) atropisomerism, which spans two classes (class 1 and 3 atropisomers), and provide first evidence that axCannabinoids retain─and in some cases, strengthen─affinity and functional activity at cannabinoid receptors. Together, these findings present a promising new direction for the design of novel cannabinoid ligands for drug discovery and exploration of the complex endocannabinoid system.

Isolation and Characterization of Impurities in Commercially Marketed Δ8-THC Products.

Qualitative analysis of several commercial products containing Δ8-tetrahydrocannabinol (Δ8-THC) as a major component using GC-MS resulted in the identification of several impurities along with Δ8-THC. In an attempt to isolate and identify these impurities, a commercial Δ8-THC distillate was selected for the isolation work. Eleven impurities were isolated using a variety of chromatographic techniques, and their chemical structures were determined. These include Δ4,8-iso-tetrahydrocannabinol (1), Δ4-iso-tetrahydrocannabinol (2), Δ8-cis-iso-tetrahydrocannabinol (3), 4,8-epoxy-iso-tetrahydrocannabinol (4), 8-hydroxy-iso-tetrahydrocannabinol (5), 9ß-hydroxyhexahydrocannabinol (6), 9α-hydroxyhexa-hydrocannabinol (7), iso-tetrahydrocannabifuran (8), cannabicitran (CBT, 9), olivetol (10), and Δ9-THC (11). The chemical structures of the purified compounds were determined using several spectroscopic methods, including 1D (1H, 13C, and DEPT-135) and 2D (COSY, HMQC, HMBC, and NOESY) NMR, LC-MS, and GC-MS. Other naturally occurring cannabinoids and impurities were also identified in GC-MS chromatograms but were not isolated. These were cannabidiol (CBD, 12), cannabinol (CBN, 13), hexahydrocannabinol (HHC, 14), and Δ8-tetrahydrocannabivarin (Δ8-THCV, 15). The chemical structure of Δ8-THCV (15), for which a standard was not available, was confirmed by partial synthesis and NMR analysis. This is the first report for many of the above compounds as well as Δ8-THCV as impurities in Δ8-THC products.

Cannabidiol for Oral Health: A New Promising Therapeutical Tool in Dentistry.

The medical use of cannabis has a very long history. Although many substances called cannabinoids are present in cannabis, Δ9tetrahydrocannabinol (Δ9-THC), cannabidiol (CBD) and cannabinol (CBN) are the three main cannabinoids that are most present and described. CBD itself is not responsible for the psychotropic effects of cannabis, since it does not produce the typical behavioral effects associated with the consumption of this drug. CBD has recently gained growing attention in modern society and seems to be increasingly explored in dentistry. Several subjective findings suggest some therapeutic effects of CBD that are strongly supported by research evidence. However, there is a plethora of data regarding CBD's mechanism of action and therapeutic potential, which are in many cases contradictory. We will first provide an overview of the scientific evidence on the molecular mechanism of CBD's action. Furthermore, we will map the recent developments regarding the possible oral benefits of CBD. In summary, we will highlight CBD's promising biological features for its application in dentistry, despite exiting patents that suggest the current compositions for oral care as the main interest of the industry.

Therapeutic Potential of Minor Cannabinoids in Dermatological Diseases-A Synthetic Review.

Dermatological diseases pose a significant burden on the quality of life of individuals and can be challenging to treat effectively. In this aspect, cannabinoids are gaining increasing importance due to their therapeutic potential in various disease entities including skin diseases. In this synthetic review, we comprehensively analyzed the existing literature in the field of potential dermatological applications of a lesser-known subgroup of cannabinoids, the so-called minor cannabinoids, such as cannabidivarin (CBDV), cannabidiforol (CBDP), cannabichromene (CBC), tetrahydrocannabivarin (THCV), cannabigerolic acid (CBGA), cannabigerol (CBG), cannabielsoin (CBE), cannabimovone (CBM) or cannabinol (CBN), while drawing attention to their unique pharmacological properties. We systematically searched the available databases for relevant studies and analyzed the data to provide an overview of current thematic knowledge. We looked through the full-text, bibliographic and factographic databases, especially Scopus, Web of Science, PubMed, Polish Scientific Journals Database, and selected the most relevant papers. Our review highlights that minor cannabinoids exhibit diverse pharmacological activities, including anti-inflammatory, analgesic, antimicrobial, and anti-itch properties. Several studies have reported their efficacy in mitigating symptoms associated with dermatological diseases such as psoriasis, eczema, acne, and pruritus. Furthermore, minor cannabinoids have shown potential in regulating sebum production, a crucial factor in acne pathogenesis. The findings of this review suggest that minor cannabinoids hold therapeutic promise in the management of dermatological diseases. Further preclinical and clinical investigations are warranted to elucidate their mechanisms of action, determine optimal dosage regimens, and assess long-term safety profiles. Incorporating minor cannabinoids into dermatological therapies could potentially offer novel treatment options of patients and improve their overall well-being.

Anti-Inflammatory Effects of Minor Cannabinoids CBC, THCV, and CBN in Human Macrophages.

Inflammation is a natural response of the body to signals of tissue damage or infection caused by pathogens. However, when it becomes imbalanced, it can lead to various disorders such as cancer, obesity, cardiovascular problems, neurological conditions, and diabetes. The endocannabinoid system, which is present throughout the body, plays a regulatory role in different organs and influences functions such as food intake, pain perception, stress response, glucose tolerance, inflammation, cell growth and specialization, and metabolism. Phytocannabinoids derived from Cannabis sativa can interact with this system and affect its functioning. In this study, we investigate the mechanisms underlying the anti-inflammatory effects of three minor phytocannabinoids including tetrahydrocannabivarin (THCV), cannabichromene (CBC), and cannabinol (CBN) using an in vitro system. We pre-treated THP-1 macrophages with different doses of phytocannabinoids or vehicle for one hour, followed by treating the cells with 500 ng/mL of LPS or leaving them untreated for three hours. To induce the second phase of NLRP3 inflammasome activation, LPS-treated cells were further treated with 5 mM ATP for 30 min. Our findings suggest that the mitigation of the PANX1/P2X7 axis plays a significant role in the anti-inflammatory effects of THCV and CBC on NLRP3 inflammasome activation. Additionally, we observed that CBC and THCV could also downregulate the IL-6/TYK-2/STAT-3 pathway. Furthermore, we discovered that CBN may exert its inhibitory impact on the assembly of the NLRP3 inflammasome by reducing PANX1 cleavage. Interestingly, we also found that the elevated ADAR1 transcript responded negatively to THCV and CBC in LPS-macrophages, indicating a potential involvement of ADAR1 in the anti-inflammatory effects of these two phytocannabinoids. THCV and CBN inhibit P-NF-κB, downregulating proinflammatory gene transcription. In summary, THCV, CBC, and CBN exert anti-inflammatory effects by influencing different stages of gene expression: transcription, post-transcriptional regulation, translation, and post-translational regulation.

A Colorimetric Method for the Rapid Estimation of the Total Cannabinoid Content in Cannabis Samples.

A colorimetric method for the estimation of the total content of cannabinoids in cannabis samples is proposed. The assay is based on the reaction of these compounds with the reagent Fast Blue B (FBB), which has been immobilized into polydimethylsiloxane (PDMS). The reaction and detection conditions have been established according to the results obtained for the individual cannabinoids Δ9-tetrahydrocannabidiol (THC), cannabidiol (CBD), and cannabinol (CBN), as well as for ethanolic extracts obtained from cannabis samples after ultrasonication. In contact with the extract and under basic conditions, the reagent diffuses from the PDMS device, producing a red-brown solution. The absorbances measured at 500 nm after only 1 min of exposure to the FBB/PDMS composites led to responses proportional to the amounts of the cannabinoids in the reaction media. Those absorbances have been then transformed in total cannabinoid content using CBD as a reference compound. The potential utility of the proposed conditions has been tested by analyzing different cannabis samples. The selectivity towards other plants and drugs has been also evaluated. The present method is proposed as a simple and rapid alternative to chromatographic methods for the estimation of the total content of cannabinoids.

An approach to the evaluation of the potency of cannabis resin in Madrid: A health hazard? / Aproximación a la evaluación de la potencia de la resina de cannabis en Madrid: ¿Un riesgo para la salud?

The present study investigates the concentration of Delta (9)-tetrahidrocannabinol (THC), cannabidiol (CBD) and cannabinol (CBN) in 60 samples of cannabis resin acquired on the streets of Madrid region and its potential danger to consumers' health. Additionally, we study the possible correlation between the potency of samples and their organoleptic characteristics. The analysis of cannabinoids was carried out using a high performance liquid chromatography (RP-HPLC-UV). To classify samples, a strength scale based on THC content was established. THC content in 76.7% of the samples was higher than 15%. This potency allows these samples to be classified as Schedule I or drugs with "unacceptable risk" for human health. THC content in 36.7% of the samples was 28.8% on average, which means very high potency. The mean CBD content was 5%, while the correlation between the CBD/THC ratio and potency was negative. The mean content of CBN was 1.74% and the CBN/THC ratio also showed a negative correlation in respect to potency. When investigating the possible correlation between sample potency and organoleptic characteristics, those samples which simultaneously presented sticky texture, high elasticity and light brown colour had very high potency, with an average THC content of 28.7%. Our study shows that the THC content of most of the cannabis that can be purchased in Madrid region is over 15% and poses a health hazard. Additionally, we demonstrate for the first time that only those samples with very high potency can be directly associated with certain organoleptic characteristics.

El presente estudio investiga la concentración de Delta(9)-tetrahidrocannabinol (THC), cannabidiol (CBD) y cannabinol (CBN) en 60 muestras de resina de cannabis adquiridas en las calles de Madrid y su potencial riesgo para la salud del consumidor. Adicionalmente, estudiamos la posible asociación entre la potencia de las muestras y sus características organolépticas. El análisis de cannabinoides se llevó a cabo mediante cromatografía líquida de alta resolución (RP-HPLC-UV). Atendiendo al contenido en THC se estableció una escala de potencia para clasificar las muestras. El 76,7% de las muestras tenía un contenido en THC superior al 15%, esta potencia las cataloga como drogas de Grado I con "riesgo inaceptable" para la salud. El 36,7% de las muestras presentaron un contenido medio en THC del 28,8% (potencia muy alta). El contenido medio en CBD fue del 5% y el de CBN 1,74%; ambas ratios, CBD/THC y CBN/THC, mostraron una correlación negativa con la potencia. Al investigar la posible asociación entra potencia y características organolépticas, se observó que las muestras que presentaban a la vez una textura pegajosa, una elasticidad alta y un color marrón claro, tenían una potencia muy alta, con un contenido medio en THC del 28.7%. Nuestro estudio muestra que el contenido en THC de la mayoría de la resina de cannabis que puede adquirirse en Madrid es superior al 15% y supone un elevado riesgo para la salud. Adicionalmente, demostramos por primera vez que solo aquellas muestras con una potencia muy alta pueden asociarse directamente con ciertas características organolépticas.

Semiquantitative Screening of THC Analogues by Silica Gel TLC with an Ag(I) Retention Zone and Chromogenic Smartphone Detection.

With the ever-evolving cannabis industry, low-cost and high-throughput analytical methods for cannabinoids are urgently needed. Normally, (potentially) psychoactive cannabinoids, typically represented by Δ9-tetrahydrocannabinol (Δ9-THC), and nonpsychoactive cannabinoids with therapeutic benefits, typically represented by cannabidiol (CBD), are the target analytes. Structurally, the former (tetrahydrocannabinolic acid (THCA), cannabinol (CBN), and THC) have one olefinic double bond and the latter (cannabidiolic acid (CBDA), cannabigerol (CBG), and CBD) have two, which results in different affinities toward Ag(I) ions. Thus, a silica gel thin-layer chromatography (TLC) plate with the lower third impregnated with Ag(I) ions enabled within minutes a digital chromatographic separation of strongly retained CBD analogues and poorly retained THC analogues. The resolution (Rs) between the closest two spots from the two groups was 4.7, which is almost 8 times higher than the resolution on unmodified TLC. After applying Fast Blue BB as a chromogenic reagent, smartphone-based color analysis enabled semiquantification of the total percentage of THC analogues (with a limit of detection (LOD) of 11 ng for THC, 54 ng for CBN, and 50 ng for THCA when the loaded volume is 1.0 µL). The method was validated by analyzing mixed cannabis extracts and cannabis extracts. The results correlated with those of high-performance liquid chromatography with ultraviolet detection (HPLC-UV) (R2 = 0.97), but the TLC approach had the advantages of multi-minute analysis time, high throughput, low solvent consumption, portability, and ease of interpretation. In a desiccator, Ag(I)-TLC plates can be stored for at least 3 months. Therefore, this method would allow rapid distinction between high and low THC varieties of cannabis, with the potential for on-site applicability.

Analysis of cannabidiol (CBD) and THC in nonprescription consumer products: Implications for patients and practitioners.

PURPOSE: Cannabidiol products remains largely unregulated in the US. Unlike the Rx formulation of CBD [EpidiolexR], little information is available regarding labeling accuracy (does the product contain what the label says it does), lot to lot variability, nor long-term product stability. Understanding these properties are fundamental if these products are to be used in patients with epilepsy, where product variability of traditional AEDs has been suspected to result in inadequate seizure control. Therefore, we analyzed commercial CBD products, including oils, aqueous products (i.e., beverages), and various Other products for cannabinoid content vs label claims and stability under United States Pharmacopeia (USP) standards. METHOD: Samples were diluted and analyzed by HPLC for CBD, THC, and CBN concentrations in order to assess product label accuracy. Products with <90% of label claim CBD were denoted over-labeled, products with >110% of label claim CBD were denoted under-labeled, and products between 90% and 110% of label claim CBD were denoted appropriately labeled, per USP standards. RESULTS: Among commercial CBD Oils (n = 11), mean CBD concentration vs label claim was 91.56% [95% CI, 66.02-117.10%], although 18.18% of oils (n = 2) made nonspecific label claims of "hemp extract" in lieu of CBD. Among all oils, 36.36% (n = 4) were appropriately labeled, another 36.4% (n = 4) of all oils were under-labeled, maximum 128.3% label claim, and finally, 9.09% (n = 1) of oils were over-labeled. The remaining 18.18% (n = 2) of oils lacked specific CBD label claims, minimum of 0.3 mg CBD per 1-ml "dose". THC was detected in 54.55% (n = 6) of oils with a maximum concentration of 0.2% w/v and a minimum concentration of 0.036% w/v. Cannabinol was detectable in only 9.1% (n = 1) of products at a concentration of 0.00465% w/v. Among aqueous products (n = 21) tested, only 66.67% (n = 14) gave specific CBD label claims, with mean CBD concentration vs label claim of 59.93% [95% CI, 38.24-81.63%]. Only 7.14% (n = 1) of aqueous products with a label claim were appropriately labeled, 14.29% (n = 2) were found to be under-labeled, and 78.57% (n = 11) over-labeled. THC was detected in 23.81% (n = 5) of aqueous products tested with a maximum THC concentration of 0.0005% w/v, and a minimum concentration of 0.0002% w/v. Cannabinol was detected in 9.52% (n = 2) of aqueous products, both at a concentration of 0.0015% w/v. "Other" products (n = 7) tested ranged from chocolate bars to transdermal patches. Some 42.86% (n = 3) gave specific CBD label claims, with mean CBD concentration vs label claim of 67.01% [95% CI, 0.87-133.14%]. Among these three "Other" products with specific label claims, 33% (n = 1) was appropriately labeled, and 66.67% (n = 2) were over-labeled, with CBD concentrations vs label claim ranging from a minimum of 39.30% to a maximum of 101.99%. The remaining 57.14% (n = 5) of "Other" products tested made nonspecific CBD label claims, denoting CBD content in terms of "full spectrum hemp extract" or "activated cannabinoids". One such product was labeled with a "40-50-mg CBD" range instead of a single, specific value. Tetrahydrocannabinol was detected in 71.43% (n = 5) of Other products tested with a maximum concentration of 0.0046% w/w, and a minimum concentration of 0.0008% w/w. Cannabinol was detected in 14.3% (n = 1) of Other products at a concentration of 0.0001% w/w. CONCLUSION: We demonstrate that commercial CBD products, especially aqueous beverages, can show inconsistent labeling, vary largely from their label claims should they make them, and show lot-to-lot variability making dosing unpredictable.

Synthetic Strategies for Rare Cannabinoids Derived from Cannabis sativa.

Efficient syntheses of eight key cannabinoids were established and optimized. Predominant cannabinoids such as cannabigerol (CBG-C5) and cannabidiol (CBD-C5) were prepared from olivetol via regioselective condensation. Further treatments of CBD led to Δ9-tetrahydrocannabinol (THC-C5), Δ8-iso-tetrahydrocannabinol (iso-THC-C5), and cannabinol (CBN-C5). Alternatively, a [3 + 3] annulation between olivetol and citral yielded the minor cannabinoid cannabichromene (CBC-C5), which was converted into two very rare polycycles, cannabicyclol (CBL-C5) and cannabicitran (CBT-C5), in a one-pot reaction. Finally, all eight syntheses were extended by utilizing resorcinol and two phenolic analogues, achieving a cannabinoid group with more than 30 compounds through a facile synthesis strategy.

Non-psychotropic cannabinoids as inhibitors of TET1 protein.

Non-psychotropic cannabinoids (e.g., cannabidiol, cannabinol and cannabigerol) are contained in numerous alimentary and medicinal products. Therefore, predicting and studying their possible side effects, such as changes in DNA methylation, is an important task for assessing the safety of these products. Interference with TET enzymes by chelating ferrous ions can contribute to the altered methylation pattern. All tested cannabinoids displayed a strong affinity for Fe(II) ions. Cannabidiol and cannabinol exhibited potent inhibitory activities (IC50 = 4.8 and 6.27 µM, respectively) towards the TET1 protein, whereas cannabigerol had no effect on the enzyme activity. An in silico molecular docking study revealed marked binding potential within the catalytic cavity for CBD/CBN, but some affinity was also found for CBG, thus the total lack of activity remains unexplained. These results imply that cannabinoids could affect the activity of the TET1 protein not only due to their affinity for Fe(II) but also due to other types of interactions (e.g., hydrophobic interactions and hydrogen bonding).

Activity of THC, CBD, and CBN on Human ACE2 and SARS-CoV1/2 Main Protease to Understand Antiviral Defense Mechanism.

THC, CBD, and CBN were reported as promising candidates against SARS-CoV2 infection, but the mechanism of action of these three cannabinoids is not understood. This study aims to determine the mechanism of action of THC, CBD, and CBN by selecting two essential targets that directly affect the coronavirus infections as viral main proteases and human angiotensin-converting enzyme2. Tested THC and CBD presented a dual-action action against both selected targets. Only CBD acted as a potent viral main protease inhibitor at the IC50 value of 1.86 ± 0.04 µM and exhibited only moderate activity against human angiotensin-converting enzyme2 at the IC50 value of 14.65 ± 0.47 µM. THC acted as a moderate inhibitor against both viral main protease and human angiotensin-converting enzymes2 at the IC50 value of 16.23 ± 1.71 µM and 11.47 ± 3.60 µM, respectively. Here, we discuss cannabinoid-associated antiviral activity mechanisms based on in silico docking studies and in vitro receptor binding studies.

Inhibition of human androgen receptor by delta 9-tetrahydro-cannabinol and cannabidiol related to reproductive dysfunction: A computational study.

There have been conflicting reports on the impact of Cannabis sativa impact on reproductive function. Hence this study was aimed to ascertain the impact of tetrahydrocannabinol (THC) and cannabidiol (CBD) binding affinity on human androgen receptor (AR) via computational molecular dynamic simulation. The human AR coordinate in this study is derived from human AR in complex with the ligand metribolone (R18) (PBD ID: 1E3G) template using (MODELER version. 9.15). CBD (PubChem CID: 644019), and THC (PubChem CID: 16078) 2D structures were retrieved from PubChem and docked (Autodock-Vina inbuilt in PyMol into the active site of human AR using the coordinates of the co-crystalized ligand (R18). All atomic representations in this study were created using visual molecular dynamics (VMD) tools. The result revealed that neither CBD nor THC bear significant 2D similarity with R18. Despite the diversity within the chemical space, both CBD and THC poses bond flexibility required to bind avidly to AR with the docking scores comparable to R18. In fully bound state, the three compounds engage the AR pocket hydrophobic residues such as L701, L704, and L707, and aromatic residues such as F764. Polar contacts with T877 observed in R18 bound state is avoided in the THC and CBD bound states. Moreso, the results revealed that CBD has lesser binding energy compared to THC and R18 compound which serves as standard. This study hypothesized that CBD and THC binds complimentarily to the pocket AR, indicating a likely inhibition of reproductive function and prostate cancer progression.

DoE-assisted development and validation of a stability-indicating HPLC-DAD method for simultaneous determination of five cannabinoids in Cannabis sativa L. based on analytical quality by design (AQbD) concept.

INTRODUCTION: Medical uses of Cannabis sativa L. have gained interest in recent decades, which highlights the need for defining appropriate quality specifications for Cannabis-based products. However, the complexity of plant matrices and structural similarity between cannabinoids make analytical development a challenging task. Thus, the application of analytical quality by design (AQbD)-driven approaches can favour the development of fit-for-purpose methods. OBJECTIVES: To develop a high-performance liquid chromatography diode array detector (HPLC-DAD) method for simultaneous quantification of cannabidiol, Δ9 -tetrahydrocannabinol, cannabidiolic acid, tetrahydrocannabinolic acid, and cannabinol in C. sativa by applying an AQbD-driven approach. MATERIALS AND METHODS: Critical method attributes (CMA) were established following the analytical target profile. Critical method variables (CMV) were categorised based on risk assessment and literature review. Selected CMV regarding sample preparation and chromatographic conditions were optimised using response surface methodology (RSM). The working point was estimated by multiple response optimisation using Deringer's desirability function. The validity of the optimal conditions was confirmed experimentally. Method validation was performed according to ANVISA and ICH guidelines. Relative response factors (RRFs) were also determined. RESULTS AND DISCUSSION: Baseline resolution of 12 major cannabinoids was achieved in a 35 min chromatographic analysis. All experimental responses obtained during confirmatory analyses were within the prediction intervals (PI95% ). Method's selectivity, linearity (10-100 µg/mL), precision, bias, extraction recovery, and ruggedness were satisfactorily demonstrated. CONCLUSIONS: The application of an AQbD-driven approach allowed for a better understanding of the effects of the ensemble of CMV on the analyte's behaviour, enabling the definition of appropriate conditions to ensure consistent achievement of the intended method's performance.

The Determination of Cannabinoids in Urine Samples Using Microextraction by Packed Sorbent and Gas Chromatography-Mass Spectrometry.

Cannabis is the most consumed illicit drug worldwide, and its legal status is a source of concern. This study proposes a rapid procedure for the simultaneous quantification of Δ9-tetrahydrocannabinol (THC), 11-hydroxy-Δ9-tetrahydrocannabinol (11-OH-THC), 11-nor-9-carboxy-Δ9-tetrahydrocannabinol (THC-COOH), cannabidiol (CBD), and cannabinol (CBN) in urine samples. Microextraction by packed sorbent (MEPS) was used to pre-concentrate the analytes, which were detected by gas chromatography-mass spectrometry. The procedure was previously optimized, and the final conditions were: conditioning with 50 µL methanol and 50 µL of water, sample load with two draw-eject cycles, and washing with 310 µL of 0.1% formic acid in water with 5% isopropanol; the elution was made with 35 µL of 0.1% ammonium hydroxide in methanol. This fast extraction procedure allowed quantification in the ranges of 1-400 ng/mL for THC and CBD, 5-400 ng/mL for CBN and 11-OH-THC, and 10-400 ng/mL for THC-COOH with coefficients of determination higher than 0.99. The limits of quantification and detection were between 1 and 10 ng/mL using 0.25 mL of sample. The extraction efficiencies varied between 26 and 85%. This analytical method is the first allowing the for determination of cannabinoids in urine samples using MEPS, a fast, simple, and low-cost alternative to conventional techniques.

The Role of Cannabis sativa L. as a Source of Cannabinoids against Coronavirus 2 (SARS-CoV-2): An In Silico Study to Evaluate Their Activities and ADMET Properties.

Cannabis sativa L. is an annual herbaceous plant that belongs to the family Cannabinaceae. In this study, the potential use of forty-five cannabinoids, previously identified from Cannabis sativa to alleviate COVID-19 infection via prohibition of crucial SARS-CoV-2 proteins using molecular docking, was examined. In silico studies were performed on three vital enzymes that serve as principle therapeutic targets to prevent SARS-CoV-2 replication. These enzymes are the main protease SARS-CoV-2 MPro, papain-like protease SARS-CoV-2 PLpro and angiotensin-converting enzyme 2 (ACE2). Regarding SARS-CoV-2 MPro, cannabichromanon (32) showed the best fitting within its active centers, followed by cannabinolic acid (22) and cannabinol (21), displaying ∆G of -33.63, -23.24, and -21.60 kcal/mol, respectively. Concerning SARS-CoV-2 PLpro, cannabichromanon (32) followed by cannabinolic acid (22) and cannabicyclolic acid (41) revealed the best binding within its active pockets owing to multiple bond formation with ∆G values of -28.36, -22.81, and -19.89 kcal/mol. Furthermore, cannabichromanon (32), cannabinolic acid (22), and cannabinol (21) showed considerable fitting within the active sites of angiotensin-converting enzyme 2 (ACE2) evidenced by their significant ∆G values that were estimated as -41.77, -31.34, and -30.36 kcal/mol, respectively. ADME/TOPKAT (absorption, distribution, metabolism, excretion, and toxicity) evaluation was performed on the tested cannabinoids to further explore their pharmacokinetics, pharmacodynamics, and toxicity properties. The results indicated the considerable pharmacokinetic, pharmacodynamic, and toxicity properties of cannabinol (21), cannabinolic acid (22), cannabichromanon (32), and cannabicyclolic acid (41) that showed best fitting scores within the active sites of the tested enzymes. Multivariate data analysis revealed that cannabichromanon and cannabinolic acid showed a discriminant nature and hence can be incorporated in pharmaceutical dosage forms to alleviate COVID-19 infection.