RESUMEN
In the face of growing global freshwater scarcity, the imperative to recycle and reuse water becomes increasingly apparent across industrial, agricultural, and domestic sectors. Eliminating a range of organic pollutants in wastewater, from pesticides to industrial byproducts, presents a formidable challenge. Among the potential solutions, membrane technologies emerge as promising contenders for treating diverse organic contaminants from industrial, agricultural, and household origins. This paper explores cutting-edge membrane-based approaches, including reverse osmosis, nanofiltration, ultrafiltration, microfiltration, gas separation membranes, and pervaporation. Each technology's efficacy in removing distinct organic pollutants while producing purified water is scrutinized. This review delves into membrane fouling, discussing its influencing factors and preventative strategies. It sheds light on the merits, limitations, and prospects of these various membrane techniques, contributing to the advancement of wastewater treatment. It advocates for future research in membrane technology with a focus on fouling control and the development of energy-efficient devices. Interdisciplinary collaboration among researchers, engineers, policymakers, and industry players is vital for shaping water purification innovation. Ongoing research and collaboration position us to fulfill the promise of accessible, clean water for all.
Asunto(s)
Membranas Artificiales , Contaminantes Químicos del Agua , Purificación del Agua , Purificación del Agua/métodos , Contaminantes Químicos del Agua/química , Contaminantes Químicos del Agua/aislamiento & purificación , Eliminación de Residuos Líquidos/métodos , Filtración/métodos , Filtración/instrumentación , Ultrafiltración/métodos , Compuestos Orgánicos/aislamiento & purificaciónRESUMEN
The detection and discrimination of organic acids (OAs) is of great importance in the early diagnosis of specific diseases. In this study, we established an effective visual sensor array for the identification of OA. This is the first time, to our best knowledge, that metal ions were used to regulate the etching of silver triangular nanoprisms (AgTNPs) in an OA discrimination sensor array. The sensor array was based on the oxidation etching of AgTNPs by three metal ions (Mn2+, Pb2+, and Cr3+) and accelerated etching of AgTNPs by OA. The introduction of metal ions alone led to a slight wavelength shift of the AgTNPs colloid solution, signifying the incomplete etching of the AgTNPs. Nevertheless, when metal ions and OA were introduced simultaneously to the solution, a significant blueshift of the localized surface plasmon resonance peak was detected, and a color change of the AgTNPs was observed, which were the consequences of morphological transitions of the AgTNPs. The addition of different OA accelerated AgTNPs etching in varying degrees, generating diverse colorimetric response patterns (i.e., RGB variations) as "fingerprints" associated with each specific organic acid. Pattern recognition algorithms and neural network simulation were employed to further data analysis, indicating the outstanding discrimination capability of the provided array for eight OA at the 33 µM level. Moreover, excellent results of selective experiments as well as real samples tests demonstrate that our proposed method possesses great potential for practical applications.
Asunto(s)
Compuestos Orgánicos , Colorimetría/métodos , Iones , Compuestos Orgánicos/aislamiento & purificación , Plata , MetalesRESUMEN
Sponge iron (SFe) is a zero-valent iron (Fe0) composite with a high-purity and porous structure. In this study, SFe was coupled with microorganisms that were gradually domesticated to form a Fe0/iron-oxidizing bacteria system (Fe0-FeOB system). The enhancement effect of the Fe0-FeOB system on refractory organics was verified, the mechanism of its strengthening action was investigated, and the relationship and influencing factors between the Fe0 and microorganisms were revealed. The average removal rates of the Fe0-FeOB system were 8.98%, 5.69%, and 40.67% higher than those of the SBR system for AF, AN, and NB wastewater treatment, respectively. With the addition of SFe, the microbial community structure was gradually enhanced with a large number of FeOB were detected. Moreover, the bacteria with strong iron corrosion and Fe(II) oxidation abilities plays a critical role in improving the Fenton-like effect. Interestingly, the variation trend of â OH was fairly consistent with that of Fe(II). Thus, the main drivers of the Fenton-like effect are biological corrosion and metabolism. Consequently, microbial degradation and Fenton-like effect contributed to the degradation performance of the Fe0-FeOB system. Among them, the microbial degradation accounted for 96.09%, of which the biogenic Fenton effect accounted for 8.9%, and the microbial metabolic activity accounted for 87.19%. However, the augmentation of the Fe0-FeOB system was strongly dependent on SFe for the strengthening effect of microorganisms disappeared after leaving the SFe 35 days.
Asunto(s)
Hierro/química , Compuestos Orgánicos/aislamiento & purificación , Microbiota , Purificación del Agua/métodosRESUMEN
RATIONALE: Low-molecular-weight organic acids that generally contain one to three carboxyl groups are involved in many important biological processes; therefore, it is important to develop a quantitative method for analyzing organic acids in serum in order to allow an evaluation of metabolic changes. In this study, we evaluated a protocol for detecting 26 organic acids in serum based on ultrasound-assisted derivatization by gas chromatography/mass spectrometry (GC/MS). METHODS: Serum samples were prepared using ultrasound-assisted silane derivatization before GC/MS analysis to quantify concentrations of organic acids. Additionally, we investigated the variables affecting derivatization yields, including the extraction solvent, derivatization reagents, and derivatization conditions (reaction temperature, duration, and sonication parameters). The protocol was ultimately applied to detect organic acid profiles related to obesity. RESULTS: We used acetone as the extraction solvent and determined suitable derivatization conditions, as follows: BSTFA + 1% TMCS, 50°C, 10 min, and 100% ultrasound power. The protocol showed satisfactory linearity (r = 0.9958-0.9996), a low limit of detection (0.04-0.42 µmol/L), good reproducibility (coefficient of variation (CV) %: 0.32-13.76%), acceptable accuracy (recovery: 82.97-114.96%), and good stability within 5 days (CV%: 1.35-12.01% at room temperature, 1.24-14.09% at 4°C, and 1.01-11.67% at -20°C). Moreover, the protocol was successfully applied to obtain the organic acid profiles from obese and healthy control subjects. CONCLUSIONS: We identified and validated a protocol for ultrasound-assisted derivatization prior to GC/MS analysis for detecting 26 kinds of organic acids in serum. The results suggest the efficacy of this protocol for clinical applications to determine metabolic changes related to fluctuations in organic acid profiles.
Asunto(s)
Cromatografía de Gases y Espectrometría de Masas/métodos , Compuestos Orgánicos/sangre , Ultrasonido/métodos , Humanos , Compuestos Orgánicos/aislamiento & purificación , Suero/químicaRESUMEN
To simultaneously and efficiently extract pollutants with differential polarities, we herein fabricated and characterized a multifunctional nanocomposite. The novel nanohybrids used NiFe2 O4 as magnetic cores, and NH2 -MIL-101(Al), ß-cyclodextrin and graphene oxide as functional components combined with magnetic cores. With the aid of graphene oxide's large π-conjugated system, NH2 -MIL-101(Al)'s strong adsorption to moderately/strongly polar chemicals, and ß-cyclodextrin's specific recognition effect, the nanohybrids realized synergistically efficient extraction of polyaromatic hydrocarbons and bisphenols with a logKow range of 3-6. Combined with acidic and alkaline sources, the nanohybrids-based effervescent tablets were prepared. Based on effervescent reaction-enhanced nanohybrids-based efficient adsorption/extraction and high performance liquid chromatography and fluorescence detection, we successfully developed an excellent microextraction method for the simultaneous determination of both polyaromatic hydrocarbons and bisphenols in roasted meat samples. Several important variables were optimized as follows: Na2 CO3 and tartaric acid as acidic and alkaline sources, 900 µLof the mixed solvent (acetone and hexane at 2:1 by v/v) as the eluent, 5 min of elution time. Under optimized conditions, the novel method gave low limits of detection (0.07-0.30 µg kg-1 ), satisfactory recoveries (86.9-103.9%), and high precision (relative standard deviations of 1.9-6.7%) in roasted lamb, beef, pork, chicken, and sausage samples.
Asunto(s)
Contaminación de Alimentos/análisis , Magnetismo , Productos de la Carne/análisis , Nanoestructuras , Compuestos Orgánicos/aislamiento & purificación , Microextracción en Fase Sólida/métodos , Compuestos de Bencidrilo/aislamiento & purificación , Cromatografía Líquida de Alta Presión/métodos , Límite de Detección , Microscopía Electrónica de Rastreo , Microscopía Electrónica de Transmisión , Fenoles/aislamiento & purificación , Hidrocarburos Policíclicos Aromáticos/aislamiento & purificación , Espectrometría de Fluorescencia/métodosRESUMEN
Covalent organic frameworks (COFs) are an emerging class of crystalline porous polymers with highly tuneable structures and functionalities. COFs have been proposed as ideal materials for applications in the energy-intensive field of molecular separation due to their notable intrinsic features such as low density, exceptional stability, high surface area, and readily adjustable pore size and chemical environment. This review attempts to highlight the key advancements made in the synthesis of COFs for diverse separation applications such as water treatment or the separation of gas mixtures and organic molecules, including chiral and isomeric compounds. Methods proposed for the fabrication of COF-based columns and continuous membranes for practical applications are also discussed in detail. Finally, a perspective regarding the remaining challenges and future directions for COF research in the field of separation has also been presented.
Asunto(s)
Estructuras Metalorgánicas/química , Gases/aislamiento & purificación , Isomerismo , Estructura Molecular , Compuestos Orgánicos/aislamiento & purificación , Porosidad , Relación Estructura-Actividad , Propiedades de Superficie , Purificación del Agua/métodosRESUMEN
In topic-related literature pertaining to the treatment of water, there is a lack of information on the influence of iron ions in highly basic polyaluminum chlorides on the efficiency of purifying water with increased contents of organic substance. The aim of this work was to determine the changes in the content of organic substances as well as iron compounds in water intended for human consumption following unit treatment processes with particular attention paid to the coagulation process. As coagulants, polyaluminium chloride PAXXL10 with an alkalinity of 70%, as well as polyaluminium chloride PAXXL1911 with an alkalinity of 85% the composition of which also contained iron, were tested. The analysis of the obtained results showed that iron compounds and organic substances were removed to the greatest extent by the coagulation process, which also had a significant influence on the final efficiency of water treatment. The effectiveness of water treatment was determined by the type of tested polyaluminum chloride, which influenced the formation of iron-organic complexes. The reason behind the formation of colored iron-organic complexes during coagulation using PAXXL1911 coagulant was the high pH (approx. 8), at which the functional groups of organic substances, due to their dissociation, are more reactive in relation to iron, and possibly the fact of introducing additional iron ions along with the coagulant.
Asunto(s)
Álcalis/química , Hidróxido de Aluminio/química , Hierro/aislamiento & purificación , Compuestos Orgánicos/aislamiento & purificación , Contaminantes Químicos del Agua/aislamiento & purificación , Purificación del Agua/métodos , Concentración de Iones de HidrógenoRESUMEN
With everyday advances in the field of pharmaceuticals, medicinal plants have high priority regarding the introduction of novel synthetic compounds by the usage of environmentally friendly extraction technologies. Herein, a supercritical CO2 extraction method was implemented in the analysis of four plants (chamomile, St. John's wort, yarrow, and curry plant) after which the non-targeted analysis of the chemical composition, phenolic content, and antioxidant activity was evaluated. The extraction yield was the highest for the chamomile (5%), while moderate yields were obtained for the other three plants. The chemical composition analyzed by gas chromatography-high-resolution mass spectrometry (GC-HRMS) and liquid chromatography-high-resolution mass spectrometry (LC-HRMS) demonstrated extraction of diverse compounds including terpenes and terpenoids, fatty acids, flavonoids and coumarins, functionalized phytosterols, and polyphenols. Voltammetry of microfilm immobilized on a glassy carbon electrode using square-wave voltammetry (SWV) was applied in the analysis of extracts. It was found that antioxidant activity obtained by SWV correlates well to 1,1-diphenyl-2-picrylhidrazine (DPPH) radical assay (R2 = 0.818) and ferric reducing antioxidant power (FRAP) assay (R2 = 0.640), but not to the total phenolic content (R2 = 0.092). Effective results were obtained in terms of activity showing the potential usage of supercritical CO2 extraction to acquire bioactive compounds of interest.
Asunto(s)
Antioxidantes/química , Dióxido de Carbono/química , Fraccionamiento Químico/métodos , Extractos Vegetales/química , Plantas Medicinales/química , Achillea/química , Antioxidantes/aislamiento & purificación , Manzanilla/química , Cromatografía de Gases , Cromatografía Liquida , Cromatografía con Fluido Supercrítico/métodos , Helichrysum/química , Hypericum/química , Espectrometría de Masas , Región Mediterránea , Compuestos Orgánicos/análisis , Compuestos Orgánicos/química , Compuestos Orgánicos/aislamiento & purificación , Fenoles/análisis , Fenoles/química , Fenoles/aislamiento & purificación , Extractos Vegetales/aislamiento & purificaciónRESUMEN
This study focused on the application of mesoporous silica monoliths for the removal of organic pollutants. The physico-chemical textural and surface properties of the monoliths were investigated. The homogeneity of the textural properties along the entire length of the monoliths was assessed, as well as the reproducibility of the synthesis method. The adsorption properties of the monoliths for gaseous toluene, as a model of Volatile Organic Compounds (VOCs), were evaluated and compared to those of a reference meso-structured silica powder (MCM-41) of commercial origin. Silica monoliths adsorbed comparable amounts of toluene with respect to MCM-41, with better performances at low pressure. Finally, considering their potential application in water phase, the adsorption properties of monoliths toward Rhodamine B, selected as a model molecule of water soluble pollutants, were studied together with their stability in water. After 24 h of contact, the silica monoliths were able to adsorb up to the 70% of 1.5 × 10-2 mM Rhodamine B in water solution.
Asunto(s)
Contaminantes Ambientales/aislamiento & purificación , Gases/química , Compuestos Orgánicos/aislamiento & purificación , Dióxido de Silicio/química , Compuestos Orgánicos Volátiles/aislamiento & purificación , Purificación del Agua/métodosRESUMEN
BACKGROUND: Chicken manure waste has a wide range of organic substances and mineral elements. This enriched source has stimulated great scientific interest in finding cleaner and more environmentally benign nutrient recovery options. This study aimed to determine an effective and eco-friendly method (i.e. subcritical water extraction) for processing fresh poultry manure. RESULTS: The high content of total organic carbon, including humic acids carbon and fulvic acids carbon, in extract was found to release under subcritical conditions. The organic compounds obtained by extraction with subcritical water correspond to humic acid in composition because of the presence in the sample of all the functional groups: polymer bonded by molecular hydrogen bond (3400 cm-1 ), the presence of CH2 and CH3 groups (2870 cm-1 ), the presence of carboxyl groups (1720 cm-1 ) and quinones (1640-1680 cm-1 ). The solid phase left over was characterized by a high content of organic carbon, phosphorus, potassium, and microelements. The maximum extraction of humic acid and fulvic acid carbon was found between 210 and 250 °C at a pressure of 50-60 atm, and the content was a maximum of 3647.2 × 10-6 g kg-1 at an extraction temperature of 250 °C. CONCLUSION: Given the high content of humic acid found in the extracted medium, the proposed subcritical extraction opens up new opportunities for nutrients recovery in the poultry industry. © 2020 Society of Chemical Industry.
Asunto(s)
Estiércol/análisis , Compuestos Orgánicos/aislamiento & purificación , Agua/química , Animales , Carbono/análisis , Pollos , Sustancias Húmicas/análisis , Compuestos Orgánicos/química , TemperaturaRESUMEN
Miniaturized LC has evolved at an exponential rate over the last 50 years. In the past decade, it has received considerable attention in the field of bioanalytical separation science and technology due to the need to measure different classes of biomolecules present in a variety of matrixes on a global scale to gain a deeper understanding of complex biological processes. This field has become a dominant area underpinning the molecular omics research (e.g., proteomics, metabolomics, lipidomics, and foodomics), allowing key insights into the function and mechanism of small to very large biomolecules on a molecular level. This Feature highlights the recent advances in molecular omics focusing on miniaturized LC technology combined with mass spectrometry-based platforms, with a particular emphasis on the strategies adopted and applications using new and sensitive nanoscale analytical methodologies.
Asunto(s)
Cromatografía Liquida/instrumentación , Cromatografía Liquida/métodos , Nanoestructuras/química , Aminoácidos/análisis , Aminoácidos/aislamiento & purificación , Humanos , Lípidos/análisis , Lípidos/aislamiento & purificación , Espectrometría de Masas , Metabolómica , Compuestos Orgánicos/análisis , Compuestos Orgánicos/aislamiento & purificación , Proteómica , Propiedades de SuperficieRESUMEN
Organic acids play a key role in central metabolic functions of organisms, are crucial for understanding regulatory processes and are ubiquitous inside the cell. Therefore, quantification of these compounds provides a valuable approach for studying dynamics of metabolic processes, in particular when the organism faces changing environmental conditions. However, the extraction and analysis of organic acids can be challenging and validated methods available in this field are limited. In this study, we developed a method for the extraction and quantification of organic acids from microbial samples based on solid-phase extraction on a strong anionic exchange cartridge and gas chromatographic-mass spectrometric analysis. Full method validation was conducted to determine quality parameters of the new method. Recoveries for 12 of the 15 aromatic and aliphatic acids were between 100 and 111% and detection limits between 3 and 272 ng/mL. The ranges for the regression coefficients and process standard deviations for these compound classes were 0.9874-0.9994 and 0.04-0.69 µg/mL, respectively. Limitations were encountered when targeting aliphatic acids with hydroxy, oxo or enol ester functions. Finally, we demonstrated the applicability of the method on cell extracts of the bacterium Escherichia coli and the dinoflagellate Prorocentrum minimum. Graphical abstract.
Asunto(s)
Ácidos/análisis , Dinoflagelados/química , Escherichia coli/química , Cromatografía de Gases y Espectrometría de Masas/métodos , Extracción en Fase Sólida/métodos , Ácidos/aislamiento & purificación , Límite de Detección , Compuestos Orgánicos/análisis , Compuestos Orgánicos/aislamiento & purificaciónRESUMEN
A peptide mixture named tolypin, originally isolated from species of the fungal genus Tolypocladium, was structurally characterised and sequences compared to those reported for efrapeptins isolated from strains of Tolypocladium inflatum. Chiral amino acid analysis, direct infusion, and online HPLC electrospray ionization tandem mass spectrometry provided composition, molecular weights of peptides, and series of diagnostic fragment ions. Sequences deduced from ESI-MS revealed that tolypins C-G are identical to efrapeptins C-G. The results were corroborated by ESI-MS and HPLC of an authentic efrapeptin sample from Eli Lilly Research Laboratories (USA). Comparison of the HPLC elution profiles of efrapeptin and tolypin indicated a pronounced microheterogeneity of the former. A high-resolution HPLC of authentic efrapeptin has not been published before. Close relationship and partial identity of sequences of tolypins and efrapeptins, which had previously been postulated, were definitely proven. The geographical origin of the two most important T. inflatum strains used for sequencing of efrapeptins/tolypins could unambiguously be clarified. A new minor compound, designated tolypin H1, was sequenced. High proportions of helicogenic Aib (α-aminoisobutyric acid) and l-isovaline, N-terminal acetyl-l-pipecolic acid and the unusual, amide-bound C-terminal residue, named (S)-2-amino-1-(1,5-diazabicyclo[4.3.0]non-5-ene-5-ylium)-4-methylpentane corresponding to 1-[(2S)-2-amino-4-methylpentyl]-2,3,4,6,7,8-hexahydropyrrolo[1,2-a]pyrimidin-1-ium, define these peptides as linear, cationic peptaibiotics.
Asunto(s)
Hypocreales/química , Insecticidas/aislamiento & purificación , Peptaiboles/aislamiento & purificación , Cromatografía Líquida de Alta Presión , Insecticidas/química , Estructura Molecular , Compuestos Orgánicos/química , Compuestos Orgánicos/aislamiento & purificación , Peptaiboles/química , Espectrometría de Masa por Ionización de ElectrosprayRESUMEN
The applicability of the hydride generation (HG) sample introduction technique combined with different spectrochemical detection methods for non-chromatographic speciation of toxic As species, i.e., As(III), As(V), dimethylarsinate (DMA) and monomethylarsonate (MMA), in waters and other environmental, food and biological matrices is presented as a promising tool to speciate As by obviating chromatographic separation. Different non-chromatographic procedures along with speciation protocols reported in the literature over the past 20 year are summarized. Basic rules ensuring species selective generation of the corresponding hydrides are presented in detail. Common strategies and alternative approaches are highlighted. Aspects of proper sample preparation before analysis and the selection of adequate strategies for speciation purposes are emphasized.
Asunto(s)
Fraccionamiento Químico/métodos , Métodos Analíticos de la Preparación de la Muestra , Compuestos Orgánicos/química , Compuestos Orgánicos/aislamiento & purificaciónRESUMEN
An automatic mesofluidic system combining dynamic oral bioaccessibility with lab-on-valve (LOV)-based sorptive microextraction is herein proposed for the first time for exploring the kinetics of leaching of incurred rather than spiked organic emerging contaminants (viz., methyl paraben, butyl paraben, diclofenac, and triclosan) from exposed mussels on the basis of the Versantvoort's fed-state physiological extraction test. Our method capitalizes on programmable flow analysis, in which gastrointestinal extracts are obtained online by pumping a simulated biorelevant gastrointestinal fluid across a large-bore column (maintained at 37.0 ± 2.0 °C) loaded with 250 mg of freeze-dried and powdered mussel onto a polyvinyldiene difluoride filter membrane. The physiologically relevant extracts are then cleaned up, and the analytes are preconcentrated onto a dedicated reversed-phase solid-phase extraction (Oasis PRIME-HLB) microcolumn that is captured into the channels of an LOV mesofluidic platform. The aim behind this is to obtain analyte-laden eluates with ACN/MeOH (90:10, v/v) in unsupervised mode for direct injection into LC-MS. The LOV minicolumn (≤25 mg) is automatically disposed of and renewed for every individual fraction on account of the strong retention of (phospho)lipids by the copolymeric sorbent. The proposed dynamic bioaccessibility test features a significant shortening of the extraction time against the batch method (28 vs 240 min) while avoiding overestimation of potentially bioavailable fractions. The trueness of the online gastrointestinal extraction method was confirmed using mass-balance validation following ultrasonic-assisted solid-liquid extraction of the original mussel sample and the residual (nonbioaccessible) fraction of emerging contaminants.
Asunto(s)
Líquidos Corporales/metabolismo , Análisis de Inyección de Flujo/instrumentación , Tracto Gastrointestinal/metabolismo , Compuestos Orgánicos/análisis , Extracción en Fase Sólida/métodos , Contaminantes Químicos del Agua/análisis , Animales , Automatización , Bivalvos , Cromatografía Líquida de Alta Presión , Análisis de Inyección de Flujo/métodos , Compuestos Orgánicos/aislamiento & purificación , Polímeros/química , Contaminantes Químicos del Agua/aislamiento & purificaciónRESUMEN
The easy shrinkage and swelling of polymer monolithic column when exposed to mobile phase with different polarity is a problem that cannot be ignored. To overcome this drawback, a convenient aqueous two-phase polymerization approach was used to prepare poly (polyethylene glycol diacrylate, PEGDA) monolithic porous layer open tubular (mono-PLOT) columns (150 µm). The poly(PEGDA) mono-PLOT column with homogeneous polymer porous layer was synthesized successfully. A maximum plate number of 41,500 plates per meter for allyl thiourea was obtained under a velocity of 1.8 mm/s. Several kinds of polar molecule were separated on the proposed mono-PLOT column and a typical hydrophilic interaction retention mechanism was observed. High speed separation of benzoic acids was also carried out, baseline separation of five benzoic acids was successfully achieved within 5 min with a 70 cm mono-PLOT column at 50°C. Furthermore, the resulting PLOT column was also successfully applied to separate standard analytes of three DNA oxidative damage products and RNA-modified nucleosides and four chlorophenols. At last, the column could separate alcohols, alkanes, and aromatic isomers via GC. It had more than 20,000 plates per meter for butanol - higher than commercial coatings open tubular columns.
Asunto(s)
Cromatografía de Gases/instrumentación , Cromatografía Liquida/instrumentación , Polietilenglicoles/química , Cromatografía de Gases/métodos , Cromatografía Liquida/métodos , Interacciones Hidrofóbicas e Hidrofílicas , Modelos Lineales , Modelos Químicos , Compuestos Orgánicos/análisis , Compuestos Orgánicos/química , Compuestos Orgánicos/aislamiento & purificación , Polimerizacion , Porosidad , Reproducibilidad de los ResultadosRESUMEN
Coagulation is the best available method for removing intracellular organic matter (IOM), which is released from algae cells and is an important precursor to disinfection by-products in drinking water treatment. To gain insight into the best strategy to optimize IOM removal, the coagulation performance of two Al salts, i.e., aluminum chloride (AlCl3) and polyaluminum chloride (PACl, containing 81.2% Al13), was investigated to illuminate the effect of Al species distribution on IOM removal. PACl showed better removal efficiency than AlCl3 with regard to the removal of turbidity and dissolved organic carbon (DOC), owing to the higher charge neutralization effect and greater stability of pre-formed Al13 species. High pressure size exclusion chromatography analysis indicated that the superiority of PACl in DOC removal could be ascribed to the higher binding affinity between Al13 polymer and the low and medium molecular weight (MW) fractions of IOM. The results of differential log-transformed absorbance at 254 and 350â¯nm indicated more significant formation of complexes between AlCl3 and IOM, which benefits the removal of tryptophan-like proteins thereafter. Additionally, PACl showed more significant superiority compared to AlCl3 in the removal of <5â¯kDa and hydrophilic fractions, which are widely viewed as the most difficult to remove by coagulation. This study provides insight into the interactions between Al species and IOM, and advances the optimization of coagulation for the removal of IOM in eutrophic water.
Asunto(s)
Aluminio/química , Espacio Intracelular/química , Compuestos Orgánicos/química , Compuestos Orgánicos/aislamiento & purificación , Polímeros/química , Eutrofización , Microcystis/citología , Microcystis/crecimiento & desarrollo , Peso MolecularRESUMEN
The removal of four dissolved organic matter (DOM) fractions, non-acid hydrophobics, hydrophobic acids, hydrophilics and transphilics, was achieved by coagulation-UV/H2O2 oxidation in post-pharmaceutical wastewater (PhWW). Coagulation with Polyferric chloride (PFC), Polymeric ferric sulfate (PFS) and Polymeric aluminum ferric chloride (PAFC) was studied separately to evaluate the effects of the initial pH and coagulant dosage. The coagulation-UV/H2O2 oxidation method resulted in much higher reduction rates for dissolved organic carbon (DOC) (by 75%) and UV254 (by 92%) than coagulation or UV/H2O2 oxidation alone. The proportion of non-acid hydrophobics, hydrophobic acids, transphilics and hydrophilics removed by coagulation was 54%, 49%, 27% and 12 %, while the combined treatment removed 92%, 87%, 70% and 39%, respectively. Parallel factor analysis (PARAFAC) of fluorescence measurements revealed that the humic-like fluorescent component C4 showed the highest removal (by 44%) during the coagulation stage. After coagulation-UV/H2O2 treatment, the humic-like fluorescent component C3 had the highest removal (by 72%), whereas xenobiotic organic fluorescent components C1 and C4 remained recalcitrant to decomposition. Significant correlations (R2 > 0.8) between C1 and the hydrophobic acids and non-acid hydrophobics suggested the possibility of using fluorescence spectroscopy as an effective tool to assess variations in DOM fraction treatment efficacy in coagulation-UV/H2O2 systems. After the combined treatment, toxic inhibition of cellular activity by post PhWW decreased from 88% to 47% and biodegradability increased from 0.1 to 0.52.
Asunto(s)
Industria Farmacéutica , Peróxido de Hidrógeno/química , Compuestos Orgánicos/química , Compuestos Orgánicos/aislamiento & purificación , Rayos Ultravioleta , Aguas Residuales/química , Ecotoxicología , Compuestos Orgánicos/metabolismo , Compuestos Orgánicos/toxicidad , Oxidación-Reducción , Contaminantes Químicos del Agua/química , Contaminantes Químicos del Agua/aislamiento & purificación , Contaminantes Químicos del Agua/metabolismo , Contaminantes Químicos del Agua/toxicidadRESUMEN
The flexibility and versatility of the chiral CE are unrivaled and the same instrumentation can be used to separate a diverse range of analytes, both large and small molecules, whether charged or uncharged. However, one of the disadvantages is generally thought to be the poor sensitivity of ultraviolet (UV) detection, which is the most popular among CE detectors. This review focuses on methodologies and applications regarding improvements of sensitivity in chiral CE published in the last 2 years (June 2015 until May 2017). This contribution continues to update this series of biannual reviews, first published in Electrophoresis in 2006. The main body of the review brings a survey of publications organized according to different approaches to detect a low amount of analytes, either by sample treatment procedures or by in-capillary sample preconcentration techniques, both using UV detection, or even by employing detection systems more sensitive than UV absorption, such as LIF or MS. This review provides comprehensive tables listing the new approaches in sensitive chiral CE with categorizing by the fundamental mechanism to enhance the sensitivity, which provide relevant information on the strategies employed. The concluding remarks in the final part of the review evaluate present state of art and the trends for sensitivity enhancement in chiral CE.
Asunto(s)
Compuestos Orgánicos/química , Compuestos Orgánicos/aislamiento & purificación , Fraccionamiento Químico/métodos , Electroforesis Capilar/métodos , Espectrometría de Masas/métodos , Sensibilidad y Especificidad , Espectrometría de Fluorescencia/métodos , Espectrofotometría Ultravioleta/métodos , EstereoisomerismoRESUMEN
This review focuses on the recent advances on microscale separation technology, particularly on the new development on column and detection technologies in electrophoretic and chromatographic separation modes (i.e., CE, CEC, cLC, etc.). Representative examples illustrate also applications on the small molecules, peptides, proteins, polysaccharides, chiral and so on. 246 relevant articles are cited covering the literature published from 2013 to May 2017.