Novel 3D textile structures and geometries for electrofluidics.

The integration of microfluidics with electric field control, commonly referred to as electrofluidics, has led to new opportunities for biomedical analysis. The requirement for closed microcapillary channels in microfluidics, typically formed via complex microlithographic fabrication approaches, limits the direct accessibility to the separation processes during conventional electrofluidic devices. Textile structures provide an alternative and low-cost approach to overcome these limitations via providing open and surface-accessible capillary channels. Herein, we investigate the potential of different 3D textile structures for electrofluidics. In this study, 12 polyester yarns were braided around nylon monofilament cores of different diameters to produce functional 3D core-shell textile structures. Capillary electrophoresis performances of these 3D core-shell textile structures both before and after removing the nylon core were evaluated in terms of mobility and bandwidth of a fluorescence marker compound. It was shown that the fibre arrangement and density govern the inherent capillary formation within these textile structures which also impacts upon the solute analyte mobility and separation bandwidth during electrophoretic studies. Core-shell textile structures with a 0.47 mm nylon core exhibited the highest fluorescein mobility and presented a narrower separation bandwidth. This optimal textile structure was readily converted to different geometries via a simple heat-setting of the central nylon core. This approach can be used to fabricate an array of miniaturized devices that possess many of the basic functionalities required in electrofluidics while maintaining open surface access that is otherwise impractical in classical approaches.

Combination of strong anion exchange liquid chromatography with microchip capillary electrophoresis sodium dodecyl sulfate for rapid two-dimensional separations of complex protein mixtures.

Two-dimensional separations provide a simple way to increase the resolution and peak capacity of complex protein separations. The feasibility of a recently developed instrumental approach for two-dimensional separations of proteins was evaluated. The approach is based on the general principle of two-dimensional gel electrophoresis. In the first dimension, semi-preparative strong anion exchange high-performance liquid chromatography is utilized and fractions are collected by means of a fraction collector. They are subsequently analyzed in the second dimension with microchip capillary electrophoresis sodium dodecyl sulfate. Microchip capillary electrophoresis provides the necessary speed (approximately 1 min/fraction) for short analysis. In this study, three different samples were investigated. Different constructs of soluble guanylyl cyclase were expressed in Sf9-cells using the baculovirus expression system. Cell lysates were analyzed and the resulting separations were compared. In our experimental setup, the soluble guanylyl cyclase was identified among hundreds of other proteins in these cell lysates, indicating its potential for screening, process control, or analysis. The results were validated by immunoblotting. Samples from Chinese hamster ovary cell culture before and after a purification step were investigated and approximately 9% less impurities could be observed. The separation patterns obtained for human plasma are closely similar to patterns obtained with two-dimensional gel electrophoresis and a total of 218 peaks could be observed. Overall, the approach was well applicable to all samples and, based on these results, further directions for improvements were identified. .

Two capillary approach for a multifunctional nanoflow sheath liquid interface for capillary electrophoresis-mass spectrometry.

CE hyphenated to ESI-MS (CE-ESI-MS) is a well-established technique to analyze charged analytes in complex samples. Although various interfaces for CE-MS coupling are commercially available, the development of alternatives which combine sensitivity, simplicity, and robustness remains a topic of research. In this work, a nanoflow sheath liquid CE-MS interface with two movable capillaries inside a glass emitter is described. The setup enables a separation mode and a conditioning mode to guide the separation capillary effluent either into the electrospray or to the waste, respectively. This enables to exclude parts of the analysis from MS detection and unwanted matrix components reaching the mass spectrometer, comparable to divert valves in LC-MS coupling. Also, this function improves the overall robustness of the system by reduction of particles blocking the emitter. Preconditioning with electrospray interfering substances and even the application of coating materials for every analysis is enabled, even while the separation capillary is built into the interface with running electrospray. The functionality is demonstrated by analyses of heavy matrix bioreactor samples. Overall, this innovation offers a more convenient installation of the interface, improved handling with an extended lifetime of the emitter tips and additional functions compared to previous approaches, while keeping the higher sensitivity of nanoflow CE-MS-coupling.

Rapid fingerprinting of a highly glycosylated fusion protein by microfluidic chip-based capillary electrophoresis-mass spectrometry.

Protein glycosylation can impact the efficacy, safety, and pharmacokinetics of therapeutic proteins. Achieving uniform and consistent protein glycosylation is an important requirement for product quality control at all stages of therapeutic protein drug discovery and development. The development of a new microfluidic CE device compatible with MS offers a fast and sensitive orthogonal mode of high-resolution separation with MS characterization. Here, we describe a fast and robust chip-based CE-MS method for intact glycosylation fingerprinting of a therapeutic fusion protein with complex sialylated N and O-linked glycoforms. The method effectively separates multiple sialylated glycoforms and offers a rapid detection of changes in glycosylation profile in 6 min.

Improved CE(SDS)-CZE-MS method utilizing an 8-port nanoliter valve.

Capillary sieving electrophoresis utilizing SDS (CE(SDS)) is one of the most applied methods for the analysis of antibody (mAb) size heterogeneity in the biopharmaceutical industry. Inadequate peak identification of observed protein fragments is still a major issue. In a recent publication, we introduced an electrophoretic 2D system, enabling online mass spectrometric detection of generic CE(SDS) separated peaks and identification of several mAb fragments. However, an improvement regarding system stability and handling of the approach was desired. Here, we introduce a novel 8-port valve in conjunction with an optimized decomplexation strategy. The valve contains four sample loops with increased distances between the separation dimensions. Thus, successively coinjection of solvent and cationic surfactant without any additional detector in the second dimension is enabled, simplifying the decomplexation strategy. Removal efficiency was optimized by testing different volumes of solvents as presample and cationic surfactant as postsample zone. 2D measurements of the light and heavy chain of the reduced NIST mAb with the 8-port valve and the optimized decomplexation strategy demonstrates the increased robustness of the system. The presented novel set-up is a step toward routine application of CE(SDS)-CZE-MS for impurity characterization of proteins in the biopharmaceutical field.

Separation and determination of alkyl sulfate surfactants in wastewater by capillary electrophoresis coupled with contactless conductivity detection after preconcentration by simultaneous adsorption using alumina beads.

The aim of the present study is to determine four anionic alkyl sulfate (AS) surfactants with different alkyl chains, namely, C8, C10, C12, and C14, in wastewater by CE with capacitively coupled contactless conductivity detection (CE-C4 D). The conditions effective for the separation of the four AS surfactants were systematically optimized and found to be in a Tris-His (50 mM/20 mM) BGE solution at a pH of 8.95, using a separation voltage of +15 kV, hydrodynamic injection by siphoning using a 20 cm injection height and an injection time of 20 s. The LODs for C8, C10, C12, and C14 were 2.58, 2.30, 2.08, and 3.16 mg/L, respectively. The conditions used to achieve the simultaneous adsorption and preconcentration of the AS surfactants using Al2 O3 beads were pH of 3 and 0.1 mM NaCl. The adsorption efficiencies were found to be 45.6, 50.8, 81.7, and 99.9%, while the desorption efficiencies reached 66.1, 70.4, 83.9, and 100.0% for C8, C10, C12, and C14, respectively. The concentrations of the AS surfactants in wastewater samples were quantified by CE-C4 D after preconcentration by simultaneous adsorption using Al2 O3 beads. The results obtained from the proposed method were consistent with those obtained by HPLC-MS/MS, with a deviation of less than 15%. Our results indicate that the CE-C4 D performed after preconcentration by an adsorption technique using Al2 O3 beads is a new, inexpensive, and suitable method for quantifying AS surfactants in wastewater samples.

Simultaneous determination of flavonoids and anthraquinones in honey by using SPE-CE-LIF.

Based on advantages of capillary electrophoresis (CE), a new solid-phase extraction (SPE) coupled with CE has been developed for preconcentration, enrichment and determination of anthraquinones and flavonoids (rutin, emodin, quercetin, 1,8-dihydroxyanthraquinone) in honey. The environmental-friendly chitin activated after an easy processing is selected as the adsorbent to enrich analytes. Then, chitin was filled into the filter as the solid phase. To improve the extraction effect, some key parameters of extraction were optimized. Under the optional extraction conditions, the chitin showed excellent adsorption capacity and selectivity over rutin, emodin, quercetin, and 1,8-dihydroxyanthraquinone, with enrichment factors reaching 5 folds. The CE coupled with fluorescence detection was used for the detection. Results prove the method is simple, fast, and highly sensitive, with the limit of detection (LOD) is 3.00-200.0 ng/mL; the recovery is 90.0-107.0%, and relative standard deviation of (RSD) is 1.8-8.3%.

Kinetic analysis of the transphosphorylation with creatine kinase by pressure-assisted capillary electrophoresis/dynamic frontal analysis.

Kinetic reactions of the transphosphorylation with creatine kinase (CK) were individually investigated between creatine (Cr) and creatine phosphate (CrP) by pressure-assisted capillary electrophoresis/dynamic frontal analysis (pCE/DFA). The transphosphorylations are reversible between Cr and CrP, and reverse reactions inevitably accompany in general batch analyses. In pCE/DFA, the kinetic reaction proceeds in a separation capillary and the product is continuously resolved from the substrate zone. Therefore, the formation rate is kept constant at the substrate zone without the reverse reaction, and the product is detected as a plateau signal. This study demonstrates the direct and individual analyses of both the forward and the backward kinetic reactions with CK by pCE/DFA. A plateau signal was detected in the pCE/DFA with ADP or ATP as one of the products on either the forward or the backward reactions. The Michaelis-Menten constants of Km,ATP (from Cr to CrP) and Km,ADP (from CrP to Cr) were successfully determined through the plateau signal. Determined values of Km,ATP and Km,ADP by pCE/DFA were smaller than the ones obtained by the pre-capillary batch analyses. The results agree with the fact that the reverse reaction is excluded in the analysis of the kinetic reactions. The proposed pCE/DFA is useful on individual analyses of both forward and backward kinetic reactions without any interference from the reverse reaction.

Low Flow Voltage Free Interface for Capillary Electrophoresis and Mass Spectrometry Driven by Vibrating Sharp-Edge Spray Ionization.

Capillary electrophoresis-mass spectrometry is a powerful technique for high-throughput and high efficiency separations combined with structural identification. Electrospray ionization is the primary interface used to couple capillary electrophoresis to mass analyzers; however, improved designs continue to be reported. A new interfacing method based on vibrating sharp-edge spray ionization is presented in this work to overcome the challenges of decoupling applied voltages and to enhance the compatibility with separations performed at near-neutral pH. The versatility and ease of use of this ionization source is demonstrated using ß-blockers, peptides, and proteins. The cationic ß-blocker pindolol was injected electrokinetically, and detected at concentrations ranging from 10 nM to 5 µM, with an estimated detection limit of 2 nM. The vibrating sharp-edge spray ionization functions with flow rates from 70 to 200 nL/min and did not perturb the capillary electrophoresis separation electroosmotic flow as evidenced by the observation that most migration times differed less than 7% (n = 3) across a lab-built system interfaced to mass spectrometry and a commercial system that utilizes absorbance detection. For cationic beta-blockers the theoretical plates achieved in the capillary electrophoresis-mass spectrometry setup were 80%-95% of that observed with a commercial capillary electrophoresis-UV absorbance detection system.

Dynamic pH barrage junction focusing of amino acids, peptides, and digested monoclonal antibodies in capillary electrophoresis-mass spectrometry.

Dynamic pH barrage junction focusing in CE enables effective signal enhancement, quantitative capture efficiencies, and straightforward optimization. The method is a technical variant of dynamic pH junction focusing. CE separation with dynamic pH barrage junction focusing is compatible with both optical and mass spectrometric detection. We developed a CE-MS/MS method using hydrophilic polyethyleneimine-coated capillaries and validated it for the qualitative analysis of amino acids, peptides, and tryptic peptides of digested monoclonal antibodies. The S/N of extracted ion electropherograms of zwitterionic analytes were enhanced by approximately two orders of magnitude with a tradeoff of a shortened separation window. Online focusing improved the MS signal intensity of a diluted antibody digest, enabling more precursor ions to be analyzed with subsequent tandem mass spectrometric identification. It also broadened the concentration range of protein digest samples for which adequate sequence coverage data can be obtained. With only 0.9 ng of digested infliximab sample loaded into the capillary, 76% and 100% sequence coverage was realized for antibody heavy and light chains, respectively, after online focusing. Full coverage was achieved with 9 ng of injected digest.

Controllable and high-performance immobilized enzyme reactor: DNA-directed immobilization of multienzyme in polyamidoamine dendrimer-functionalized capillaries.

In recent years, CE-integrated immobilized enzyme reactors (IMERs) for single-enzyme immobilization have attracted considerable attention. However, there has been little research on multienzyme immobilization in CE. Here, we introduce a method for fabricating a CE-integrated IMER, using DNA-directed immobilization to fix glucose oxidase and horseradish peroxidase in the capillary, which had been functionalized with polyamidoamine dendrimer (PAMAM). Owing to the reversibility of DNA hybridization, the reactor is capable of dynamic immobilization. Moreover, by introducing the PAMAM, the loading capacity of the IMER is greatly enhanced, and the PAMAM can spontaneously form complexes with DNA and then contribute to the efficiency and stability of the reactor. After 25 days storage, the prepared IMER ultimately retained approximately 70% of its initial activity. We also used the IMER to detect glucose, and the favorable linearity was obtained over the concentration range of 0.78-12.5 mM, with an LOD of 0.39 mM, demonstrating that the CE-integrated IMER can be applied to actual samples. We believe that this strategy can be extended to other multienzyme immobilization systems, and CE-integrated IMERs are potentially useful in a wide range of biochemical research applications.

Low-cost and versatile analytical tool with purpose-made capillary electrophoresis coupled to contactless conductivity detection: Application to antibiotics quality control in Vietnam.

In this study, the development of our purpose-made capacitively coupled contactless conductivity detection (C4 D) for CE is reported. These systems have been employed as a simple, versatile, and cost-effective analytical tool. CE-C4 D devices, whose principle is based on the control of the ion movements under an electrical field, can be constructed even with a modest financial budget and limited infrastructure. A featured application was developed for quality control of antimicrobial drugs using CE-C4 D, with most recent work on determination of aminoglycoside and glycopeptide antibiotics being communicated. For aminoglycosides, the development of CE-C4 D methods was adapted to two categories. The first one includes drugs (liquid or powder form) for intravenous injection, containing either amikacin, streptomycin, kanamycin A, or kanamycin B. The second one covers drugs for eye drops (liquid or ointment form), containing either neomycin, tobramycin, or polymyxin. The CE-C4 D method development was also made for determination of some popular glycopeptide antibiotics in Vietnam, including vancomycin and teicoplanin. The best detection limit achieved using the developed CE-C4 D methods was 0.5 mg/L. Good agreement between results from CE-C4 D and the confirmation method (HPLC- Photometric Diode Array ) was achieved, with their result deviations less than 8% and 13% for aminoglycoside and glycopeptide antibiotics, respectively.

An in-line enzymatic microreactor for the middle-up analysis of monoclonal antibodies by capillary electrophoresis.

Monoclonal antibodies (mAbs) are undergoing rapid growth in the pharmaceutical industry due to their clinical efficiency. Concomitantly, robust, cost-effective, and high throughput analytical methods are needed for their quality control. Among all analytical techniques, capillary electrophoresis (CE) presents alternative and attractive features because the capillary can be used both as a microreactor and as a support for separation. Transverse diffusion of laminar flow profiles was applied for the middle-up analysis of mAbs for the first time. Infliximab was selected as the model mAb. All middle-up analysis steps (enzymatic digestion, electrophoretic separation and UV detection) were integrated into the same capillary. The conditions for the separation of infliximab subunits (pH, ionic strength, and type of background electrolyte) and in-line digestion parameters (reactant injection conditions, time, temperature and enzyme/mAb ratio) were optimized. The in-line methodology was compared to the off-line methodology and evaluated in terms of proteolysis efficiency, repeatability, and applicability to different mAbs. Finally, the methodology was transferred to capillary electrophoresis coupled to mass spectrometry (sheathless interface) to identify infliximab subunits. The in-line methodology was successfully implemented with a simplified injection scheme, temperature control, fast enzymatic reaction and high resolution of separation of infliximab subunits under pseudo-native MS compatible conditions. In comparison with the off-line methodology, reactant consumption was reduced by a factor of 1000, and the numbers of theoretical plates were increased by a factor of 2.

Strong correlation and high comparability of capillary electrophoresis and three different methods for HbA1c measurement in a population without hemoglobinopathy.

The present study aimed to investigate the comparability of capillary electrophoresis (CE) and three different methods for HbA1c measurement. The 270 whole blood samples with normal hemoglobin profiles were analyzed for HbA1c values by the Roche turbidimetric inhibition immunoassay (TINIA), the Mindray enzymatic assay (EA), the Arkray high-performance liquid chromatography (HPLC) in comparison with the Sebia CE. The within-laboratory coefficient of variation of all four methods was within the accepted goal (<2%), showing good performance of all of these methods. Pairwise comparisons of HbA1c values obtained by CE and other methods were determined in both total group and subgroups (HbA1c levels of <6.5%, 6.5-8% and >8%). Mean differences of HbA1c values in all groups were very small in which the mean HbA1c value measured by EA was lower while those by TINIA and HPLC were higher than that of CE. The majority of different values were within the limits of agreement in Bland-Altman analysis, indicating good agreement between CE and the others. Less than 5% of percentage differences were out of the total allowable error limit in all groups, showing that differences of HbA1c values between CE and other methods were not clinically significant. Pairwise comparisons of HbA1c values of CE and the others in Passing-Bablok regression and Spearman rank correlation studies displayed high concordance and strong correlation in all groups. In conclusion, the present study showed strong correlation, high comparability and consistent results for HbA1c measurement between capillary electrophoresis and the other three different methods.

Evaluation on the separated effect of 13 hemoglobin variants by a new automatic Hba1c analyzer.

OBJECTIVE: To evaluate the effect of a new type of automatic glycated hemoglobin analyzer on the separation of abnormal hemoglobin. METHODS: Samples diagnosed as hemoglobin variants by capillary electrophoresis and gene testing were selected, and HbA1c analyzer was used for separation and detection. RESULTS: A total of 13 hemoglobin variants in 40 samples could be separated from the normal peaks. CONCLUSIONS: The variant mode of hemoglobin HbA1c can identify a variety of hemoglobin variants, and the type of variants can be preliminarily determined according to the retention time and characteristic peak shape of the variants.

Advantages and Pitfalls of Capillary Electrophoresis of Pharmaceutical Compounds and Their Enantiomers in Complex Samples: Comparison of Hydrodynamically Opened and Closed Systems.

Several research disciplines require fast, reliable and highly automated determination of pharmaceutically active compounds and their enantiomers in complex biological matrices. To address some of the challenges of Capillary Electrophoresis (CE), such as low concentration sensitivity and performance degradation linked to the adsorption and interference of matrix components, CE in a hydrodynamically closed system was evaluated using the model compounds Pindolol and Propranolol. Some established validation parameters such as repeatability of injection efficiency, resolution and sensitivity were used to assess its performance, and it was found to be broadly identical to that of hydrodynamically opened systems. While some reduction in separation efficiency was observed, this was mainly due to dispersion caused by injection and it had no impact on the ability to resolve enantiomers of model compounds even when spiked into complex biological matrix such as blood serum. An approximately 18- to 23-fold increase in concentration sensitivity due to the employment of wide bore capillaries was observed. This brings the sensitivity of CE to a level similar to that of liquid chromatography techniques. In addition to this benefit and unlike in hydrodynamically opened systems, suppression of electroosmotic flow, which is essential for hydrodynamically closed systems practically eliminates the matrix effects that are linked to protein adsorption.

Open source capillary electrophoresis.

Open source paradigm is becoming widely accepted in scientific communities and open source hardware is finding its steady place in chemistry research. In this review article, we provide the reader with the most up-to-date information on open source hardware and software resources enabling the construction and utilization of an "open source capillary electrophoresis instrument". While CE is still underused as a separation technique, it offers unique flexibility, low-cost, and high efficiency and is particularly suitable for open source instrumental development. We overview the major parts of CE instruments, such as high voltage power supplies, detectors, data acquisition systems, and CE software resources with emphasis on availability of the open source information on the web and in the scientific literature. This review is the first of its kind, revealing accessible blueprints of most parts from which a fully functional open source CE system can be built. By collecting the extensive information on open source capillary electrophoresis in this review article, the authors aim at facilitating the dissemination of knowledge on CE within and outside the scientific community, fosters innovation and inspire other researchers to improve the shared CE blueprints.

An air-assisted flow-gating interface for capillary electrophoresis.

A new kind of flow gating interface (FGI) has been designed for online connection of CE with flow-through analytical techniques. The sample is injected into the separation capillary from a space from which the BGE was forced out by compressed air. A drop of sample solution with a volume of 75 nL is formed between the outlet of the delivery capillary supplying the solution from the flow-through apparatus and the entrance to the CE capillary; the sample is hydrodynamically injected into the CE capillary from this drop. The sample is not mixed with the surrounding BGE solution during injection. The functioning of the proposed FGI is fully automated and the individual steps of the injection process are controlled by a computer. The injection sequence lasts several seconds and thus permits performance of rapid sequential analyses of the collected sample. FGI was tested for the separation of equimolar 50 µM mixture of the inorganic cations K+ , Ba2+ , Na+ , Mg2+ , and Li+ in 50 mM acetic acid/20 mM Tris (pH 4.5) as BGE. The obtained RSD values for the migration times varied in the range 0.7-1.0% and the values for the peak area were 0.7-1.4%; RSD were determined for ten repeated measurements.

Integrated internal standards: A sample prep-free method for better precision in microchip CE.

Point-of-care systems based on microchip capillary electrophoresis require single-use, disposable microchips prefilled with all necessary solutions so an untrained operator only needs to apply the sample and perform the analysis. While microchip fabrication can be (and has been) standardized, some manufacturing differences between microchips are unavoidable. To improve analyte precision without increasing device costs or introducing additional error sources, we recently proposed the use of integrated internal standards (ISTDs): ions added to the BGE in small concentrations which form system peaks in the electropherogram that can be used as a measurement reference. Here, we further expand this initial proof-of-principle test to study a clinically-relevant application of K ion concentrations in human blood; however, using a mock blood solution instead of real samples to avoid interference from other obstacles (e.g. cell lysis). Cs as an integrated ISTD improves repeatability of K ion migration times from 6.97% to 0.89% and the linear calibration correlation coefficient (R2 ) for K quantification from 0.851 to 0.967. Peak area repeatability improves from 11.6-13.3% to 4.75-5.04% at each K concentration above the LOQ. These results further validate the feasibility of using integrated ISTDs to improve imprecision in disposable microchip CE devices by demonstrating their application for physiological samples.

Heart-cut nano-LC-CZE-MS for the characterization of proteins on the intact level.

Multidimensional separation techniques play an increasingly important role in separation science, especially for the analysis of complex samples such as proteins. The combination of reversed-phase liquid chromatography in the nanoscale and CZE is especially beneficial due to their nearly orthogonal separation mechanism and well-suited geometries/dimensions. Here, a heart-cut nano-LC-CZE-MS setup was developed utilizing for the first time a mechanical 4-port valve as LC-CE interface. A model protein mixture containing four different protein species was first separated by nano LC followed by a heart-cut transfer of individual LC peaks and subsequent CZE-MS analysis. In the CZE dimension, various glycoforms of one protein species were separated. Improved separation capabilities were achieved compared to the 1D methods, which was exemplarily shown for ribonuclease B and its different glycosylated forms. LODs in the lower µg/mL range were determined, which are considerably lower compared to traditional CZE-MS. In addition, this study represents the first application of an LC-CE-MS system for intact protein analysis. The nano-LC-CZE-MS system is expected to be applicable to various other analytical challenges.