Preparation and Luminescence Properties of A-Type Lutecium Silicate Core-Shell Nanospheres.

X-ray radio-luminescence materials have potential application in radiotherapy (RT) and biomedical imaging. Considering that lutecium ions (Lu3+) with high atomic number (Z) have high X-ray attenuation coefficients, Ce3+-doped A-type Lu2SiO5@SiO2 (A-LSO:Ce3+@SiO2) core-shell nanospheres with size in the range of 200-250 nm were prepared through coprecipitation method. The growth mechanism of A-LSO:Ce3+@SiO2 core-shell nanospheres was investigated through determining the phase transition and morphology evolution by XRD, FT-IR, and TEM. The emission spectra, decay profile, and X-ray excited luminescence spectra (XEL) of the obtained samples were collected. The results show that a new type of lutecium silicate core-shell nanospheres A-LSO:Ce3+@SiO2 can be fabricated and exhibit efficient radio-luminescence under X-ray radiation, which has potential application in the diagnosis and therapy of cancer.

In-vitro bioactivity of silicate-phosphate glasses using agriculture biomass silica.

In the present work, silica extracted from the agricultural waste material; rice husk (RH) was utilized for the synthesis of biocompatible glass of general composition SiO2-P2O5-CaO-MgO-MoO3. In the synthesized glasses P2O5 (5%) and CaO (25%) was kept constant whereas MgO and MoO3 was varied from 10% to 20% and 0% to 5% respectively. The structural, morphological, elemental and functional properties of silica as well as the derived glasses were analyzed by X-Ray Diffraction (XRD), Field Emission Scanning Electron Microscopy (FE-SEM), Energy Dispersive X-ray spectroscopy (EDX) and Fourier Transform Infrared (FTIR) spectroscopy techniques. The effect of MoO3 on the structural and thermal properties of silicate phosphate glasses has been studied in details. The bioactivity of as-synthesized glass samples were further evaluated after immersion in Simulated Body Fluid (SBF) solution which shows bioactive properties thus enabling them to be used as scaffolds in implant materials.

Effect of ethanol/TEOS ratios and amount of ammonia on the properties of copper-doped calcium silicate nanoceramics.

Calcium magnesium silicate glasses could be suggested for the synthesis of scaffolds for hard tissue regeneration, as they present a high residual glassy phase, high hardness values and hydroxyapatite-forming ability. The use of trace elements in the human body, such as Cu, could improve the biological performance of such glasses, as Cu is known to play a significant role in angiogenesis. Nano-bioceramics are preferable compared to their micro-scale counterparts, because of their increased surface area, which improves both mechanical properties and apatite-forming ability due to the increased nucleation sites provided, their high diffusion rates, reduced sintering time or temperature, and high mechanical properties. The aim of the present work was the evaluation of the effect of different ratios of Ethanol/TEOS and total amount of the inserted ammonia to the particle size, morphology and bioactive, hemolytic and antibacterial behavior of nanoparticles in the quaternary system SiO2-CaO-MgO-CuO. Different ratios of Ethanol/TEOS and ammonia amount affected the size and morphology of bioactive nanopowders. The optimum materials were synthesized with the highest ethanol/TEOS ratio and ammonia amount as verified by the enhanced apatite-forming ability and antibacterial and non-hemolytic properties.

Water near its Supercritical Point and at Alkaline pH for the Production of Ferric Oxides and Silicates in Anoxic Conditions. A New Hypothesis for the Synthesis of Minerals Observed in Banded Iron Formations and for the Related Geobiotropic Chemistry inside Fluid Inclusions.

An alternative hypothesis for the origin of the banded iron formations and the synthesis of prebiotic molecules is presented here. I show the importance of considering water near its supercritical point and at alkaline pH. It is based on the chemical equation for the anoxic oxidation of ferrous iron into ferric iron at high-subcritical conditions of water and high pH, that I extract from E-pH diagrams drawn for corrosion purposes (Geophysical Research Abstracts Vol 15, EGU2013-22 Bassez 2013, Orig Life Evol Biosph 45(1):5-13, Bassez 2015, Procedia Earth Planet Sci 17, 492-495, Bassez 2017a, Orig Life Evol Biosph 47:453-480, Bassez 2017b). The sudden change in solubility of silica, SiO2, at the critical point of water is also considered. It is shown that under these temperatures and pressures, ferric oxides and ferric silicates can form in anoxic terrains. No FeII oxidation by UV light, neither by oxygen is needed to explain the minerals of the Banded Iron Formations. The intervention of any kind of microorganisms, either sulfate-reducing, or FeII-oxidizing or O2-producing, is not required. The chemical equation for the anoxic oxidation of ferrous iron is applied to the hydrolyses of fayalite, Fe2SiO4 and ferrosilite, FeSiO3. It is shown that the BIF minerals of the Hamersley Group, Western Australia, and the Transvaal Supergroup, South Africa, are those of fayalite and ferrosilite hydrolyses and carbonations. The dissolution of crustal fayalite and ferrosilite during water-rock interaction needs to occur at T&P just below the critical point of water and in a rising water which is undersaturated in SiO2. Minerals of BIFs which can then be ejected at the surface from venting arcs are ferric oxide hydroxides, hematite, FeIII-greenalite, siderite. The greenalite dehydrated product minnesotaite forms when rising water becomes supersaturated in SiO2, as also riebeckite and stilpnomelane. Long lengths of siderite without ferric oxides neither ferric silicates can occur since the exothermic siderite formation is not so much dependent in T&P. It is also shown that the H2 which is released during hydrolysis/oxidation of fayalite/ferrosilite can lead to components of life, such as macromolecules of amino acids which are synthesized from mixtures of (CO, N2, H2O) in Sabatier-Senderens/Fischer-Tropsch & Haber-Bosch reactions or microwave or gamma-ray excitation reactions. I propose that such geobiotropic synthesis may occur inside fluid inclusions of BIFs, in the silica chert, hematite, FeIII-greenalite or siderite. Therefore, the combination of high-subcritical conditions of water, high solubility of SiO2 at these T&P values, formation of CO also at these T&P, high pH and anoxic water, leads to the formation of ferric minerals and prebiotic molecules in the process of geobiotropy.

An Extra-Large-Pore Zeolite with 24×8×8-Ring Channels Using a Structure-Directing Agent Derived from Traditional Chinese Medicine.

Extra-large-pore zeolites have attracted much interest because of their important applications for processing larger molecules. Although great progress has been made in academic science and industry, it is challenging to synthesize these materials. A new extra-large-pore zeolite SYSU-3 (Sun Yat-sen University no. 3) has been synthesized by using a novel sophoridine derivative as an organic structure-directing agent (OSDA). The framework structure was solved and refined using continuous rotation electron diffraction (cRED) data from nanosized crystals. SYSU-3 exhibits a new zeolite framework topology, which has the first 24×8×8-ring extra-large-pore system and a framework density (FD) as low as 11.4 T/1000 Å3 . The unique skeleton of the OSDA plays an essential role in the formation of the distinctive zeolite structure. This work provides a new perspective for developing new zeolitic materials by using alkaloids as cost-effective OSDAs.

[Novel Water-Soluble Substrate for Silicateins].

We suggested to use tetrakis(2-hydroxyethyl)orthosilicate (THEOS) as a substrate for silicateins--an enzyme family playing a key role in formation of skeleton in marine sponges. We compared THEOS with tetraethylorthosilicate (TEOS)--a commonly used substrate for silicateins. These substrates were tested in reaction of amorphous silica formation in vitro catalyzed by silicatein Al from sponge Latrunculia oparinae. It was found that reaction with THEOS occurs more efficiently than with TEOS, probably due to high water solubility and higher hydrolysis rate of THEOS.

Synthesis of α-Dawson-type silicotungstate [α-Si2W18O62]8- and protonation and deprotonation inside the aperture through intramolecular hydrogen bonds.

The design of structurally well-defined anionic molecular metal-oxygen clusters, polyoxometalates (POMs), leads to inorganic receptors with unique and tunable properties. Herein, an α-Dawson-type silicotungstate, TBA8[α-Si2W18O62]⋅3 H2O (II) that possesses a -8 charge was successfully synthesized by dimerization of a trivacant lacunary α-Keggin-type silicotungstate TBA4H6[α-SiW9O34]⋅2 H2O (I) in an organic solvent. POM II could be reversibly protonated (in the presence of acid) and deprotonated (in the presence of base) inside the aperture by means of intramolecular hydrogen bonds with retention of the POM structure. In contrast, the aperture of phosphorus-centered POM TBA6[α-P2W18O62]⋅H2O (III) was not protonated inside the aperture. The density functional theory (DFT) calculations revealed that the basicities and charges of internal µ3-oxygen atoms were increased by changing the central heteroatoms from P(5+) to Si(4+), thereby supporting the protonation of II. Additionally, II showed much higher catalytic performance for the Knoevenagel condensation of ethyl cyanoacetate with benzaldehyde than I and III.

Synthesis and characterization of multinuclear manganese-containing tungstosilicates.

The five manganese-containing, Keggin-based tungstosilicates [Mn(II)3(OH)3(H2O)3(A-α-SiW9O34)](7-) (1), [Mn(III)3(OH)3(H2O)3(A-α-SiW9O34)](4-) (2), [Mn(III)3(OH)3(H2O)3(A-ß-SiW9O34)](4-) (3), [Mn(III)3Mn(IV)O3(CH3COO)3(A-α-SiW9O34)](6-) (4), and [Mn(III)3Mn(IV)O3(CH3COO)3(A-ß-SiW9O34)](6-) (5) were synthesized in aqueous medium by interaction of [A-α-SiW9O34](10-) or [A-ß-SiW9O34H](9-) with either MnCl2 (1) or [Mn(III)8Mn(IV)4O12(CH3COO)16(H2O)4] (2-5) under carefully adjusted reaction conditions. The obtained salts of these polyanions were analyzed in the solid state by single-crystal X-ray diffraction, IR spectroscopy, and thermogravimetric analysis. The salts of polyanions 1, 2, and 4 were further characterized in the solid state by magnetic studies, as well as in solution by electrochemistry.

Synthesis of coffinite, USiO4, and structural investigations of UxTh(1-x)SiO4 solid solutions.

The miscibility behavior of the USiO4-ThSiO4 system was investigated. The end members and 10 solid solutions UxTh(1-x)SiO4 with x = 0.12-0.92 were successfully synthesized, without formation of other secondary uranium or thorium phases. Lattice parameters of the solid solutions evidently follow Vegard's Law. Investigation of the local structure with EXAFS reveals small differences between the U and Th environment attributed to different atomic radii of the metal atoms but no implications for a miscibility gap. The data provided confirm complete miscibility for the system USiO4-ThSiO4. The structure of the end members was studied in detail with XRD and discussed with special regard to the oxygen positions and the often neglected Si-O bond length. USiO4 could be obtained without UO2 impurities and the lattice parameters derived from Rietveld refinement as c = 6.2606(3) Å and a = 6.9841(3) Å. The Si-O distance in USiO4 appears to be 1.64 Å, which is more reasonable than earlier reported values.

Calcium silicates synthesised from industrial residues with the ability for CO2 sequestration.

This work explored several synthesis routes to obtain calcium silicates from different calcium-rich and silica-rich industrial residues. Larnite, wollastonite and calcium silicate chloride were successfully synthesised with moderate heat treatments below standard temperatures. These procedures help to not only conserve natural resources, but also to reduce the energy requirements and CO2 emissions. In addition, these silicates have been successfully tested as carbon dioxide sequesters, to enhance the viability of CO2 mineral sequestration technologies using calcium-rich industrial by-products as sequestration agents. Two different carbon sequestration experiments were performed under ambient conditions. Static experiments revealed carbonation efficiencies close to 100% and real-time resolved experiments characterised the dynamic behaviour and ability of these samples to reduce the CO2 concentration within a mixture of gases. The CO2 concentration was reduced up to 70%, with a carbon fixation dynamic ratio of 3.2 mg CO2 per g of sequestration agent and minute. Our results confirm the suitability of the proposed synthesis routes to synthesise different calcium silicates recycling industrial residues, being therefore energetically more efficient and environmentally friendly procedures for the cement industry.

Synthesis of chlorosilicates.

Chlorosilicates represent important intermediates in S(N)2 reactions of chlorosilanes. They can be stabilized by the introduction of electron-withdrawing substituents. Salts of various (pentafluoroethyl)chlorosilicates have been isolated and structurally characterized.

Synthesis and structure determination of CaSi(1/3)B(2/3)O(8/3): a new calcium borosilicate.

This article reports on the identification, synthesis, and in-situ structure determination of a new crystalline calcium borosilicate compound of composition CaSi(1/3)B(2/3)O(8/3). Synthesis was carried out by complete crystallization on annealing from a corresponding glassy composition in the widely studied CaO-SiO2-B2O3 ternary system. The crystallographic structure was determined ab initio using electron diffraction information and the charge flipping algorithm performed on synchrotron and neutron powder diffraction data collected in situ at high temperature. CaSi(1/3)B(2/3)O(8/3) is found to crystallize in the Pna2(1) (no. 33) orthorhombic space group, with a = 12.1025(4) Å, b = 5.2676(1) Å, c = 3.7132(1) Å, and V = 236.71(1) Å(3) at 650 °C. Solid-state (29)Si and (11)B NMR experiments have confirmed the existence of finite chains along the c axis, formed by corner-sharing SiO4 tetrahedra and BO3 units. Silicon and boron species share a crystallographic site, and the Si/B distribution induces different possible arrangements of the chains which are discussed in light of DFT calculations. At room temperature, the existence of a superstructure, resulting from the ordering within nanoscale domains, was explored by transmission electron microscopy.

Comparative adsorption of CO2 by mono-, di-, and triamino-organofunctionalized magnesium phyllosilicates.

Carbon dioxide adsorbents, constituted by organofunctionalized magnesium phyllosilicates, were produced using 3-aminopropyltriethoxysilane (AMPTS), N-[3-(trimethoxysilyl)propyl]-ethylenediamine (TMSPEDA), N-[3-(trimethoxysilyl)propyl]-diethylenetriamine (TMSPETA), and tetraethoxyorthosilane (TEOS) as silicon sources with N/Si ratios of 1, 0.75, 0.5, and 0.25, by conventional and microwave heating. Adsorption studies were performed using TGA and temperature programmed desorption (TPD) methods. The results showed that the best temperatures for adsorption were 41, 45, and 90 °C, when magnesium phyllosilicate functionalized with TMSPETA, TMSPEDA, and AMPTS, respectively, were used as adsorbents. Using TPD technique, the maximum efficiency was found to be between 0.285 and 0.899 for 100% AMPTS and 33.33% TMSPETA, obtained by conventional heating. Adsorption efficiency of the materials prepared by conventional method is higher than those obtained using microwave as heating source, except for 100% AMPTS. Desorption kinetics of CO2, described using Avrami's model, show that the CO2 desorption rate constant is in the range from 0.130 to 0.178 min(-1), similar to the values for CO2 desorption from monoetamolamine-functionalized TiO2 and Li4SiO4 but in a narrower range of values.

New nanostructural biomaterials based on active silicate systems and hydroxyapatite: characterization and genotoxicity in human peripheral blood lymphocytes.

AIM: To characterize and investigate the genotoxic effect of a new endodontic cement based on dicalcium- and tricalcium-silicate (CS) with hydroxyapatite (HA) on human lymphocytes. METHODOLOGY: Hydrothermal treatment was applied for synthesis of CS and HA. The final mixture HA-CS, with potential to be used in endodontic practice, is composed of CS (34%) and HA (66%). Human lymphocytes were incubated with HA, HA-CS and CS for 1 h, at 37 °C and 5% CO2. Cell viability was determined using the trypan blue exclusion assay. To evaluate the level of DNA damage comet assay (single cell gel electrophoresis) was performed. For the statistical analysis anova and Duncan's Post Hoc Test were used. RESULTS: The SEM analysis indicated that CS consisted mostly of agglomerates of several micrometers in size, built up from smaller particles, with dimensions between 117 and 477 nm. This is promising because dimensions of agglomerates are not comparable with channels inside the cell membranes, whereas their nano-elements provide evident activity, important for faster setting of these mixtures compared to MTA. Values of DNA damage obtained in the comet assay indicated low genotoxic risk of the new endodontic materials. CONCLUSIONS: The significantly improved setting characteristics and low genotoxic risk of the new material support further research.

The development of iron-free partially stabilized cement for use as dental root-end filling material.

AIM: To determine the effect of increasing the proportion of zinc on partially stabilized cement (PSC) produced using a one-step sol gel process. METHODOLOGY: A one-step sol-gel process of Portland cement-based PSC with Zn was synthesized by replacing iron nitrate. The crystalline phases of the PSC-Zn powder were analysed by using X-ray diffraction (XRD). The experimental groups [i.e., MTA, PSC-Fe (control), PSC with 1% Zn, PSC with 3% Zn, and PSC with 5% Zn] were immersed in simulated body fluid for 3 h, 1 and 3 days to evaluate the hydration product formation. The microstructure and surface morphology were analysed using scanning electron microscopy (SEM). Initial and final setting times of the materials were determined using an ASTM Vicat needle testing machine. To evaluate the cytotoxicity of PSC-Zn system, primary osteoblasts cell lines were used. RESULTS: The addition of increased weight percentages of Zn, resulted in a more unstable phase which favoured the formation of a monoclinic structure of C3 S with an increased hydration reaction of PSC and reduced setting time. The cytotoxicity testing of PSC with Zn revealed that the material was not toxic. CONCLUSIONS: The newly synthesized PSC-Zn material had short setting time and was biocompatible.

Statistical approach for assessing the influence of calcium silicate and HPMC on the formulation of novel alfuzosin hydrochloride mucoadhesive-floating beads as gastroretentive drug delivery systems.

Multiparticulate floating drug delivery systems have proven potential as controlled-release gastroretentive drug delivery systems that avoid the "all or none" gastric emptying nature of single-unit floating dosage forms. An objective of the presence investigation was to develop calcium silicate (CaSi)/calcium alginate (Ca-Alg)/hydroxypropyl methylcellulose (HPMC) mucoadhesive-floating beads that provide time- and site-specific drug release of alfuzosin hydrochloride (Alf). Beads were prepared by simultaneous internal and external gelation method utilizing 3(2) factorial design as an experimental design; with two main factors evaluated for their influence on the prepared beads; the concentration of CaSi as floating aid (X (1)) and the percentage of HPMC as viscosity enhancer and mucoadhesive polymer (X (2)), each of them was tested in three levels. Developed formulations were evaluated for yield, entrapment efficiency, particle size, surface topography, and buoyancy. Differential scanning calorimetry, Fourier transform infrared spectroscopy, in vitro drug release, as well as in vitro mucoadhesion using rat stomach mucosal membrane were also conducted. Percentage yield and entrapment efficiency ranged from 57.03% to 78.51% and from 49.78% to 83.26%, respectively. Statistical analysis using ANOVA proved that increasing the concentration of either CaSi or HPMC significantly increased the beads yield. Both CaSi and HPMC concentrations were found to significantly affect Alf release from the beads. Additionally, higher CaSi concentration significantly increased the beads diameter while HPMC concentration showed significant positive effect on the beads mucoadhesive properties. CaSi/Ca-Alg/HPMC beads represent simple floating-mucoadhesive gastroretentive system that could be useful in chronopharmacotherapy of benign prostatic hyperplasia.

Synthetic antibacterial minerals: harnessing a natural geochemical reaction to combat antibiotic resistance.

The overuse of antibiotics in clinical and livestock settings is accelerating the selection of multidrug resistant bacterial pathogens. Antibiotic resistant bacteria result in increased mortality and financial strain on the health care and livestock industry. The development of new antibiotics has stalled, and novel strategies are needed as we enter the age of antibiotic resistance. Certain naturally occurring clays have been shown to have antimicrobial properties and kill antibiotic resistant bacteria. Harnessing the activity of compounds within these clays that harbor antibiotic properties offers new therapeutic opportunities for fighting the potentially devastating effects of the post antibiotic era. However, natural samples are highly heterogenous and exhibit variable antibacterial effectiveness, therefore synthesizing minerals of high purity with reproducible antibacterial activity is needed. Here we describe for the first time synthetic smectite clay minerals and Fe-sulfide microspheres that reproduce the geochemical antibacterial properties observed in natural occurring clays. We show that these mineral formulations are effective at killing the ESKAPE pathogens (Enterococcus sp., Staphylococcus aureus, Klebsiella pneumoniae, Acinetobacter sp., Pseudomonas aeruginosa and Enterobacter sp.) by maintaining Fe2+ solubility and reactive oxygen species (ROS) production while buffering solution pH, unlike the application of metals alone. Our results represent the first step in utilizing a geochemical process to treat antibiotic resistant topical or gastrointestinal infections in the age of antibiotic resistance.

Synthesis and crystal structure of a layered silicate HUS-1 with a halved sodalite-cage topology.

A new layered silicate, HUS-1, was synthesized by hydrothermal synthesis using decomposed FAU- and *BEA-type zeolites as nanosized silica parts. Structural analyses by X-ray powder diffractometry and solid-state magic-angle-spinning (MAS) NMR spectroscopy revealed that HUS-1 has a layered structure containing a silicate layer per unit cell along a stacking direction. Its framework topology is similar to that of SOD-type zeolites and consists of a halved sodalite cage, which includes four- and six-membered Si rings. Structure refinement by the Rietveld method showed that tetramethylammonium (TMA) ions used as a structure-directing agent (SDA) were incorporated into the interlayer. The four methyl groups of the TMA molecule were located orderly in a hemispherical cage in the silicate layer, which suggests restraint of molecular motion. The interlayer distance is estimated at about 0.15 nm, which is unusually short in comparison with that in other layered silicates (e.g., ß-HLS or RUB-15) with similar framework topologies. The presence of hydrogen bonding between adjacent terminal O atoms was clearly revealed by the (1)H MAS NMR spectroscopy and by electron-density distribution obtained by the maximum entropy method.

Photochromic ordered mesoporous hybrid materials based on covalently grafted polyoxometalates.

Novel polyoxometalate (POM)-grafting mesoporous hybrid silicas, XW(11)/MHS (X=P, Si) and TBAPW(11)Si(2)/MHS, have been prepared respectively by co-condensation and post-synthesis routes based on the employment of Keggin-type monovacant XW(11) or a Si-substituted compound TBAPW(11)Si(2) as POM precursors. Upon characterization of the samples by FT-IR, XRD, ICP-AES, TEM and N(2) adsorption-desorption measurement, it was found that Keggin units were retained perfectly in ordered hexagonal mesopore channels with SBA-15 architecture and immobilized by covalent linkages on the mesopore wall. These materials, especially the co-condensed samples, exhibited stable and reversible photochromic properties under UV irradiation although no special organic component was supplied additionally as an electron donor. An investigation of the photochromism revealed that the photochromic response depended on the centre atom of the POM species (i.e., the redox potential of the POM), the content of the POM and the synthetic route of the sample, while the bleaching process was correlated not only to the redox potential but also to the pore size of the sample. The photochromic mechanism was also studied in detail by cyclic voltammetry, ESR, FT-IR and XPS techniques. It was found that the remaining P123 template acted as a reducing agent and was oxidized during the photochromic process accompanied by the reduction of the POM to heteropolyblue. Thus, a close contact between the POM and the remaining P123 chain in the sample is necessary. Low close-contact degree results in poor photochromic behavior of the post-synthesized sample and impregnated samples.

Preparation and characterization of nicotine-magnesium aluminum silicate complex-loaded sodium alginate matrix tablets for buccal delivery.

Nicotine (NCT) buccal tablets consisting of sodium alginate (SA) and nicotine-magnesium aluminum silicate (NCT-MAS) complexes acting as drug carriers were prepared using the direct compression method. The effects of the preparation pH levels of the NCT-MAS complexes and the complex/SA ratios on NCT release, permeation across mucosa, and mucoadhesive properties of the tablets were investigated. The NCT-MAS complex-loaded SA tablets had good physical properties and zero-order release kinetics of NCT, which indicate a swelling/erosion-controlled release mechanism. Measurement of unidirectional NCT release and permeation across porcine esophageal mucosa using a modified USP dissolution apparatus 2 showed that NCT delivery was controlled by the swollen gel matrix of the tablets. This matrix, which controlled drug diffusion, resulted from the molecular interactions of SA and MAS. Tablets containing the NCT-MAS complexes prepared at pH 9 showed remarkably higher NCT permeation rates than those containing the complexes prepared at acidic and neutral pH levels. Larger amounts of SA in the tablets decreased NCT release and permeation rates. Additionally, the presence of SA could enhance the mucoadhesive properties of the tablets. These findings suggest that SA plays the important role not only in controlling release and permeation of NCT but also for enhancing the mucoadhesive properties of the NCT-MAS complex-loaded SA tablets, and these tablets demonstrate a promising buccal delivery system for NCT.