Synergistic Effect of Metal Oxide and Carbon Nanoparticles on the Thermal and Mechanical Properties of Polyimide Composite Films.

In this paper, we report on novel polyimide (PI) nanocomposites filled with binary mixtures of metal oxide (either TiO2 or ZrO2) nanoparticles and nanocarbon (either carbon nanofibers (CNFs) or functionalized carbon nanotubes (CNTfs)). The structure and morphology of the materials obtained were comprehensively studied. An exhaustive investigation of their thermal and mechanical properties was performed. We revealed a synergistic effect of the nanoconstituents with regard to a number of functional characteristics of the PIs compared with single-filler nanocomposites, including thermal stability, stiffness (below and above glass transition temperature), yield point, and temperature of flowing. Moreover, the possibility of manipulating the properties of the materials by choosing a proper combination of the nanofillers was demonstrated. The results obtained can become a platform in the design of PI-based engineering materials with tailored characteristics capable of operating in extreme conditions.

Metal Oxide Nanoparticles: An Effective Tool to Modify the Functional Properties of Thermally Stable Polyimide Films.

A series of polyimide/metal oxide (either ZrO2 or TiO2) nanocomposite films were fabricated based on two polymer matrices. The prepared films were characterized by scanning electron microscopy (SEM), atomic force microscopy (AFM), and X-ray diffraction analysis (XRD), and their thermal and mechanical properties were investigated with the use of thermogravimetric (TGA), differential thermal analysis (DTA), and thermomechanical analysis (TMA). We have found out that functional properties of the obtained materials are determined by a number of factors, not only the type, size, surface functionality, and concentration of the nanofiller, but also the chemical structure of the matrix polyimide. We have demonstrated some trends in the thermal and mechanical behavior of the materials depending on these features. The data could be of great interest in the areas where new materials with improved functional characteristics are needed.

Ionic Conductivity and Structure of Chitosan Films Modified with Lactic Acid-Choline Chloride NADES.

The natural deep eutectic solvent (NADES) based on choline chloride (ChCl) and lactic acid (LA) was used for the preparation of chitosan (CS) films by the solution casting method. The content of NADES in films was from 0 to 82 wt%. The impact of NADES on the morphology and crystalline structure of films was investigated using scanning electron microscopy as well as wide-angle and small-angle X-ray scattering. The experimental results allow to propose CS chains swelling in NADES. FTIR spectroscopy confirms the interactions between CS and NADES components via the formation of hydrogen and ion bonds. The thermal properties of the composite films were studied by simultaneous thermogravimetric and differential thermal analysis. Thermomechanical analysis demonstrated appearance of two transitions at temperatures between -23 and -5 °C and 54-102 °C depending on NADES content. It was found that electrical conductivity of film with 82 wt% of NADES reaches 1.7 mS/cm. The influence of the composition and structure of films on the charge carriers concentration and their mobility is discussed.

Polyimide-Based Nanocomposites with Binary CeO2/Nanocarbon Fillers: Conjointly Enhanced Thermal and Mechanical Properties.

To design novel polymer materials with optimal properties relevant to industrial usage, it would seem logical to modify polymers with reportedly good functionality, such as polyimides (PIs). We have created a set of PI-based nanocomposites containing binary blends of CeO2 with carbon nanoparticles (nanocones/discs or nanofibres), to improve a number of functional characteristics of the PIs. The prime novelty of this study is in a search for a synergistic effect amidst the nanofiller moieties regarding the thermal and the mechanical properties of PIs. In this paper, we report on the structure, thermal, and mechanical characteristics of the PI-based nanocomposites with binary fillers. We have found that, with a certain composition, the functional performance of a material can be substantially improved. For example, a PI containing SO2-groups in its macrochains not only had its thermal stability enhanced (by ~20 °C, 10% weight loss up to 533 °C) but also had its stiffness increased by more than 10% (Young's modulus as high as 2.9-3.0 GPa) in comparison with the matrix PI. In the case of a PI with no sulfonic groups, binary fillers increased stiffness of the polymer above its glass transition temperature, thereby widening its working temperature range. The mechanisms of these phenomena are discussed. Thus, this study could contribute to the design of new composite materials with controllable and improved functionality.