Science- and Risk-Based Stability Strategies to Support Product Lifecycle Changes.

ICH Q12 asserts that science- and risk-based approaches are applicable to stability studies supporting Chemistry, Manufacturing and Controls (CMC) post-approval changes (PAC) to enable more timely implementation; however, no guidance or specific examples are provided to demonstrate how prior knowledge of the product can inform the risk assessment for the proposed change(s). Ten diverse case studies are presented in this manuscript to demonstrate how science- and risk-based stability strategies were used to support drug substance and product CMC PAC and lifecycle management activities. The accumulated stability knowledge held by original manufacturers of marketed products is substantial, and different elements of this knowledge base were used to assess the risks and impact of the proposed changes for confident change management. This paper provides ways to leverage science- and risk-based stability strategies as part of the post-approval change-management risk-mitigation strategy, which may enable a reduced stability data commitment and/or a reduced reporting category for change implementation.

Formulation-dependent stability mechanisms affecting dissolution performance of directly compressed griseofulvin tablets.

During drug product development, stability studies are used to ensure that the safety and efficacy of a product are not affected during storage. Any change in the dissolution performance of a product must be investigated, as this may indicate a change in the bioavailability. In this study, three different griseofulvin formulations were prepared containing microcrystalline cellulose (MCC) with either mannitol, lactose monohydrate, or dibasic calcium phosphate anhydrous (DCPA). The tensile strength, porosity, contact angle, disintegration time, and dissolution rate were measured after storage under five different accelerated temperature and humidity conditions for 1, 2, and 4 weeks. The dissolution rate was found to decrease after storage for all three batches, with the change in dissolution rate strongly correlating with the storage humidity. The changes in physical properties of each formulation were found to relate to either the premature swelling (MCC/DCPA, MCC/lactose) or dissolution (MCC/mannitol) of particles during storage. These results are also discussed with consideration of the performance- and stability-controlling mechanisms of placebo tablets of the same formulations (Maclean et al., 2021; Maclean et al., 2022).

Investigating the role of excipients on the physical stability of directly compressed tablets.

Stability studies are an integral part of the drug development process for any drug product. In addition to monitoring chemical degradation, the physical stability of a drug product must also be evaluated to ensure that the drug release and performance is not affected by storage. In this study, directly compressed tablets of 16 different formulations were exposed to an accelerated stability program to quantify changes in tablet breaking force, porosity, contact angle and disintegration time. Tablets were exposed to five different storage conditions from 37∘ C/30% relative humidity (RH) to 70∘ C/75%RH with testing after 2 and 4 weeks of storage. Each formulation contained two different fillers (47% w/w each), a disintegrant (5% w/w) and magnesium stearate (1% w/w). The results show that tablets stored at high humidity show increases in porosity and decreases in tensile strength, particularly if they contain a highly hygroscopic filler such as microcrystalline cellulose (MCC). For tablets stored at high temperature, the most commonly affected property was the tablet wettability, measured by sessile drop contact angle measurements. These results are considered in combination with the performance-controlling disintegration mechanism (Maclean et al., 2021) to identify the critical properties which influence the performance after storage.

Tablet disintegration performance: Effect of compression pressure and storage conditions on surface liquid absorption and swelling kinetics.

The disintegration process of pharmaceutical tablets is a crucial step in the oral delivery of a drug. Tablet disintegration does not only refer to the break up of the interparticle bonds, but also relates to the liquid absorption and swelling behaviour of the tablet. This study demonstrates the use of the sessile drop method coupled with image processing and models to analyse the surface liquid absorption and swelling kinetics of four filler combinations (microcrystalline cellulose (MCC)/mannitol, MCC/lactose, MCC/dibasic calcium phosphate anhydrous (DCPA) and DCPA/lactose) with croscarmellose sodium as a disintegrant. Changes in the disintegration performance of these formulations were analysed by quantifying the effect of compression pressure and storage condition on characteristic liquid absorption and swelling parameters. The results indicate that the disintegration performance of the MCC/mannitol and MCC/lactose formulations are driven by the liquid absorption behaviour. For the MCC/DCPA formulation, both liquid absorption and swelling characteristics affect the disintegration time, whereas DCPA/lactose tablets is primarily controlled by swelling characteristics of the various excipients. The approach discussed in this study enables a rapid (<1 min) assessment of characteristic properties that are related to tablet disintegration to inform the design of the formulation, process settings and storage conditions.

Considerations for Updates to ICH Q1 and Q5C Stability Guidelines: Embracing Current Technology and Risk Assessment Strategies.

In consideration of the recent ICH Quality Discussion Group (QDG) recommended revision to the ICH series of stability guidelines, the IQ Consortium (International Consortium for Innovation and Quality in Pharmaceutical Development) Science- and Risk-based Stability Working Group conducted a comprehensive review of ICH Q1A, Q1B, Q1C, Q1D, Q1E, and Q5C to identify areas where the guidelines could be clarified, updated, and amended to reflect the potential knowledge gained from current risk-based predictive stability tools and to consider other science- and risk-based stability strategies in accordance with ICH Q8-12. The recommendations propose a holistic approach to stability understanding, utilizing historical data, prior knowledge, modeling, and a risk assessment process to expand the concept of what could be included (or would be acceptable) in the core stability data package, including type and amount of stability evidence, assignment of retest period and shelf-life for a new product, and assessment of the impact of post-approval changes.