Decontamination of Spores on Model Stainless-Steel Surface by Using Foams Based on Alkyl Polyglucosides.

In the food industry, the surfaces of processing equipment are considered to be major factors in the risk of food contamination. The cleaning process of solid surfaces is essential, but it requires a significant amount of water and chemicals. Herein, we report the use of foam flows based on alkyl polyglucosides (APGs) to remove spores of Bacillus subtilis on stainless-steel surfaces as the model-contaminated surface. Sodium dodecyl sulfate (SDS) was also studied as an anionic surfactant. Foams were characterized during flows by measuring the foam stability and the bubble size. The efficiency of spores' removal was assessed by enumerations. We showed that foams based on APGs could remove efficiently the spores from the surfaces, but slightly less than foams based on SDS due to an effect of SDS itself on spores removal. The destabilization of the foams at the end of the process and the recovery of surfactant solutions were also evaluated by using filtration. Following a life cycle assessment (LCA) approach, we evaluated the impact of the foam flow on the global environmental footprint of the process. We showed significant environmental impact benefits with a reduction in water and energy consumption for foam cleaning. APGs are a good choice as surfactants as they decrease further the environmental impacts.

Cold plasma assisted deposition of organosilicon coatings on stainless steel for prevention of adhesion of Salmonella enterica serovar Enteritidis.

The persistence of Salmonella enterica on abiotic surfaces in hospitals and the agri-food industries leads to several infections worldwide. In this context, this work aimed to study the adhesion of S. Enteritidis on plasma-modified stainless steel to prevent biofilm-associated-infections. Surface modification was achieved by the elaboration of organosilicon coatings from the monomer 1,1,3,3-tetramethyldisiloxane, mixed with oxygen, using a flowing nitrogen microwave post-discharge plasma polymerization technique. The effect of cold plasma parameters on the properties of the coatings, the coated surface topography and S. Enteritidis cell adhesion was studied. The results showed that the surface topography influenced the bacterial adhesion rate. Indeed, rough surfaces did not repel S. Enteritidis since the number of attached cells on these coatings was between 30 ± 4 to 65 ± 4 bacteria per microscopic field. Otherwise, smoother surfaces demonstrated an anti-adhesive character since the number of attached cells was almost nil on these coatings.

Actively detached Pseudomonas aeruginosa biofilm cell susceptibility to benzalkonium chloride and associated resistance mechanism.

The present work aimed at studying physiological properties of Pseudomonas aeruginosa cells actively detached from biofilm formed on stainless steel and comparing them with their planktonic counterparts as a function of growth temperature (20 °C and 37 °C). The susceptibility of P. aeruginosa cells to benzalkonium chloride (BAC) was studied. Furthermore, the effect of BAC on the cell membrane integrity and the role of the cell membrane fluidity in the cell-scale-resistance mechanism were investigated. Our results showed that actively detached biofilm cells were more susceptible to BAC treatment than planktonic ones. A greater leakage of intracellular potassium after BAC addition was observed in actively detached biofilm cells, which reflects their membrane vulnerability. The rise of the growth temperature from 20 to 37 °C increased the membrane rigidity of planktonic cells comparatively to their actively detached biofilm ones. Under experimental conditions developed in this work, our data highlighted that actively biofilm-detached and planktonic P. aeruginosa cells have distinguishable phenotypes.

Impact of growth temperature on the adhesion of colistin-resistant Escherichia coli strains isolated from pigs to food-contact-surfaces.

This study investigated the effect of the growth temperature (20 and 37 °C) of Escherichia coli strains isolated from pigs on their adhesion to stainless steel and polycarbonate. This study also evaluated the ability of the DLVO and XDLVO mathematical models to predict this adhesion. The rise of growth temperature from 20 to 37 °C significantly influenced the adhesion of studied E. coli strains. The data also underlined that the mathematical prediction did not fully match with the experimental bacterial adhesion to surfaces. Furthermore, results showed that the colistin-resistant and sensitive E. coli strains adhesion depends on the type of abiotic surface. Based on these results, the mathematical models are limited in the prediction of the bacterial adhesion to abiotic surfaces. The surface roughness is a major parameter of the bacterial adhesion and should be included in the future mathematical models predicting the bacterial adhesion.

Effect of culture conditions on the resistance of Pseudomonas aeruginosa biofilms to disinfecting agents.

The relationship between the environmental conditions of biofilm formation and resistance to disinfectants was studied. Anti-biofilm assays were performed against biofilms grown at 20, 30 and 37°C on stainless steel and polycarbonate, over 24 and 48 h. A rise in growth temperature increased the resistance of 24 h biofilms to disinfectants containing didecyldimethylammonium chloride and decreased it to a disinfectant containing alkyldimethylbenzylammonium chloride. The increase in growth temperature coupled with an incubation time of 24 h promoted increases in both matrix production and the membrane rigidity of sessile cells. An increase in incubation time also increased both matrix production and the membrane rigidity of sessile cells. Such phenomena resulted in an increased resistance to disinfectants of biofilms grown at 20 and 30°C. The resistance of 48 h biofilms to disinfectants decreased with an increase in growth temperature despite the increase in matrix production and the membrane rigidity of sessile cells.

Biofilm formation and persistence on abiotic surfaces in the context of food and medical environments.

The biofilm formation on abiotic surfaces in food and medical sectors constitutes a great public health concerns. In fact, biofilms present a persistent source for pathogens, such as Pseudomonas aeruginosa and Staphylococcus aureus, which lead to severe infections such as foodborne and nosocomial infections. Such biofilms are also a source of material deterioration and failure. The environmental conditions, commonly met in food and medical area, seem also to enhance the biofilm formation and their resistance to disinfectant agents. In this regard, this review highlights the effect of environmental conditions on bacterial adhesion and biofilm formation on abiotic surfaces in the context of food and medical environment. It also describes the current and emergent strategies used to study the biofilm formation and its eradication. The mechanisms of biofilm resistance to commercialized disinfectants are also discussed, since this phenomenon remains unclear to date.

Effect of growth temperature, surface type and incubation time on the resistance of Staphylococcus aureus biofilms to disinfectants.

The goal of this study was to investigate the effect of the environmental conditions such as the temperature change, incubation time and surface type on the resistance of Staphylococcus aureus biofilms to disinfectants. The antibiofilm assays were performed against biofilms grown at 20 °C, 30 °C and 37 °C, on the stainless steel and polycarbonate, during 24 and 48 h. The involvement of the biofilm matrix and the bacterial membrane fluidity in the resistance of sessile cells were investigated. Our results show that the efficiency of disinfectants was dependent on the growth temperature, the surface type and the disinfectant product. The increase of growth temperature from 20 °C to 37 °C, with an incubation time of 24 h, increased the resistance of biofilms to cationic antimicrobials. This change of growth temperature did not affect the major content of the biofilm matrix, but it decreased the membrane fluidity of sessile cells through the increase of the anteiso-C19 relative amount. The increase of the biofilm resistance to disinfectants, with the rise of the incubation time, was dependent on both growth temperature and disinfectant product. The increase of the biofilm age also promoted increases in the matrix production and the membrane fluidity of sessile cells. The resistance of S. aureus biofilm seems to depend on the environment of the biofilm formation and involves both extracellular matrix and membrane fluidity of sessile cells. Our study represents the first report describing the impact of environmental conditions on the matrix production, sessile cells membrane fluidity and resistance of S. aureus biofilms to disinfectants.

High seroprevalence of SARS-CoV-2 antibodies in household cats and dogs of Lebanon.

The COVID-19 pandemic has been declared in late 2019. It is caused by the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). Flu-like symptoms and acute respiratory illnesses are the main manifestations of the disease. Recent studies have confirmed the susceptibility of domestic animals to SARS-CoV-2 infection. However, the seroprevalence of SARS-CoV-2 in household pets and the importance of pets in the epidemiology of this infection remain unknown. In Lebanon, there is no epidemiological data regarding SARS-CoV-2 infection in companion animals. Thus, this investigation aimed to determine the seroprevalence of SARS-CoV-2 antibodies in household pets of Lebanon during the COVID-19 pandemic. A cross-sectional study was carried out between April 2020 and February 2021. Blood samples from 145 cats and 180 dogs were collected from 12 veterinary clinics located in the North, Mount, and Beirut governorates. A validated ELISA assay was used to detect the anti- SARS-CoV-2 in the sera of the tested animals. An overall seroprevalence of 16.92% (55/325) was reported; 13.79% seroprevalence was found in cats (20/145) and 19.44% (35/180) in dogs. The young age and the cold season were significantly associated with an increased seropositivity rate to SARS-CoV-2 infection (P < 0.01). These results confirm the circulation of SARS-CoV-2 in household pets, in various geographical regions in Lebanon. Although, there is a lack of evidence to suggest that naturally infected pets could transmit the SARS-CoV-2 infection. Yet, owners diagnosed with COVID-19 should limit their contact with their animals during the course of the disease to curb the risk of transmission.

Eosinophil-derived IFN-gamma induces airway hyperresponsiveness and lung inflammation in the absence of lymphocytes.

BACKGROUND: Eosinophils are key players in T(H)2-driven pathologies, such as allergic lung inflammation. After IL-5- and eotaxin-mediated tissue recruitment, they release several cytotoxic and inflammatory mediators. However, their exact contribution to asthma remains controversial. Indeed, in human subjects anti-IL-5 treatment inhibits eosinophilia but not antigen-induced airway hyperresponsiveness (AHR). Likewise, lung fibrosis is abrogated in 2 strains of eosinophil-deficient mice, whereas AHR is inhibited in only one of them. Finally, eosinophils have been shown to attract T(H)2 lymphocytes at the inflammatory site. OBJECTIVE: The ability of eosinophils to promote AHR and lung inflammation independently of lymphocytes was investigated. METHODS: Adoptive transfers of resting or activated eosinophils from IL-5 transgenic mice were performed into naive BALB/c mice, mice with severe combined immunodeficiency, and IFN-gamma-deficient BALB/c recipients. RESULTS: Adoptively transferred eosinophils induced lung inflammation, fibrosis, collagen deposition, and AHR not only in BALB/c mice but also in recipient mice with severe combined immunodeficiency. Surprisingly, IFN-gamma expression was increased in lungs from eosinophil-transferred animals. Furthermore, IFN-gamma neutralization in recipients partially inhibited eosinophil-induced AHR. Moreover, IFN-gamma-deficient eosinophils or eosinophils treated with a blocking anti-IFN-gamma receptor antibody failed to induce AHR in IFN-gamma-deficient recipients. Finally, in vitro and at low concentrations, IFN-gamma increased eosinophil peroxidase release, potentiated chemotaxis, and prolonged survival, suggesting the existence of an autocrine mechanism. CONCLUSIONS: These results support the important and previously unsuspected contribution of eosinophils to lung inflammation independently of lymphocytes through production of IFN-gamma, the prototypical T(H)1 cytokine.

Comparative Study on the Impact of Growth Conditions on the Physiology and the Virulence of Pseudomonas aeruginosa Biofilm and Planktonic Cells.

The aim of the present work was to study and compare the effect of growth temperature (20, 30, and 37°C) and surface type (stainless steel and polycarbonate) on the production of virulence factors, such as proteases and siderophores, and the risk of surface contamination associated with Pseudomonas aeruginosa biofilm and planktonic cells. The increase of growth temperature from 20 to 37°C increased (approximately twofold) the electronegative charge and the hydrophobicity of the P. aeruginosa biofilm cell surface. P. aeruginosa biofilm cell adhesion to stainless steel and polycarbonate was 5- and 1.5-fold higher than their planktonic counterparts at 20 and 30°C, respectively. The increase of growth temperature from 20 to 37°C increased the production of proteases (twofold) and siderophores (twofold) and the cytotoxicity (up to 30-fold) against the HeLa cell line in the supernatants of P. aeruginosa planktonic and biofilm cultures. This study also highlighted that biofilm and planktonic P. aeruginosa cells exhibited distinct physiological properties with respect to the production of virulence factors and the cytotoxicity against the Hela cell line. Therefore, effective disinfection procedures should be adapted to inactivate bacteria detached from biofilms.

Effect of incubation duration, growth temperature, and abiotic surface type on cell surface properties, adhesion and pathogenicity of biofilm-detached Staphylococcus aureus cells.

The goal of this study was to investigate the effect of growth conditions such as the temperature (20, 30 and 37 °C), incubation duration (24 and 48 h) and surface type (stainless steel and polycarbonate) on the cell surface physicochemical properties and adhesion to abiotic surfaces of biofilm-detached and planktonic Staphylococcus aureus cells. This study tested also the hypothesis that S. aureus planktonic cells exhibit distinct pathogenic properties compared with their sessile counterparts. The results showed that the changes of the growth conditions promoted changes in the zeta potential, hydrophobicity, electron donor/acceptor character of the studied cell populations. Biofilm-detached cells showed a greater adhesion to stainless steel and polycarbonate compared with planktonic cells. Compared with planktonic cells, sessile ones showed higher cytotoxic effect against HeLa cells, DNase activity, and siderophore levels. The higher cytotoxic effect and production of DNase and siderophore increased with the increase of temperature and duration of incubations. Based on the obtained data, the S. aureus biofilm-detached cells were found to be distinct in many physiological properties compared with their planktonic counterparts.

Correction to: Effect of incubation duration, growth temperature, and abiotic surface type on cell surface properties, adhesion and pathogenicity of biofilm-detached Staphylococcus aureus cells.

Following publication of the original article (Khelissa et al. 2017), the authors reported that the legend for Fig. 3 contained an error. Instead of "Adhesion of planktonic and biofilm-detached Staphylococcus aureus cells on stainless steel and polycarbonate. Cell cultures were grown at 20, 30 and 37 °C, during 24 h (white square) and 48 h (white square). Planktonic cells adhesion on stainless steel (a) and polycarbonate (b). Adhesion of stainless steel-biofilm-detached-cells on stainless steel 24 (c) and polycarbonate-biofilm-detached-cells on polycarbonate (d)", the legend should read "Adhesion of planktonic and biofilm-detached Staphylococcus aureus cells on stainless steel and polycarbonate. Cell cultures were grown at 20, 30 and 37 °C, during 24 h (black square) and 48 h (white square). Planktonic cells adhesion on stainless steel (a) and polycarbonate (b). Adhesion of stainless steel-biofilm-detached-cells on stainless steel 24

Impact of growth temperature and surface type on the resistance of Pseudomonas aeruginosa and Staphylococcus aureus biofilms to disinfectants.

Biofilm formation of Pseudomonas aeruginosa and Staphylococcus aureus on food-contact-surfaces represents a significant risk for the public health. In this context, the present study investigates the relationship between the environmental conditions of biofilm formation and the resistance to disinfectants. Therefore, a static biofilm reactor, called NEC-Biofilm System, was established in order to study the effect of growth temperature (20, 30 and 37°C), and of the surface type (stainless steel and polycarbonate), on biofilm resistance to disinfectants. These conditions were selected to mimic the biofilm formation on abiotic surfaces of food processing industries. The antibiofilm assays were performed on biofilms grown during 24 h. The results showed that the growth temperature influenced significantly the biofilm resistance to disinfectants. These data also revealed that the growth temperature has a significant effect on the biofilm structure of both bacteria. Furthermore, the increase of the biofilm growth temperature increased significantly the algD transcript level in sessile P. aeruginosa cells, whereas the icaA one was not affected in S. aureus cells. Overall, our findings show that the biofilm structure and matrix cannot fully explain the biofilm resistance to disinfectant agents. Nevertheless, it underlines the intimate link between environmental conditions, commonly met in food sectors, and the biofilm resistance to disinfectants.

Thermodynamic prediction of growth temperature dependence in the adhesion of Pseudomonas aeruginosa and Staphylococcus aureus to stainless steel and polycarbonate.

This study investigated the effect of growth temperature changes (20, 30, and 37°C) on the adhesion behavior of Pseudomonas aeruginosa and Staphylococcus aureus to stainless steel and polycarbonate. Adhesion assays were performed under static conditions at 20°C. In addition, the validity of the thermodynamic and extended Derjaguin, Landau, Verwey, and Overbeek theories as predictive tools of bacterial adhesion were studied. The surface properties of the bacterial cells and the substrates of attachment were characterized, and atomic force microscopy was used to analyze the surface topography. The results indicated that the highest adhesion rate of P. aeruginosa and S. aureus on both surfaces was observed when the cells were grown at 37°C. The bacterial adhesion to stainless steel was found to be two times higher than to polycarbonate for both bacteria, whatever the condition used. The present study underlined that the thermodynamic and the extended Derjaguin, Landau, Verwey, and Overbeek theories were able to partially predict the empirical results of P. aeruginosa adhesion. However, these theories failed to predict the adhesion behavior of S. aureus to both surfaces when the growth temperature was changed. The results of the microbial adhesion to solvent indicated that the adhesion rate to abiotic surfaces may correlate with the hydrophobicity of bacterial surfaces. The effect of surface topography on bacterial adhesion showed that surface roughness, even on the very low nanometer scale, has a significant effect on bacterial adhesion behavior.

Identification of lactobacilli with inhibitory effect on biofilm formation by pathogenic bacteria on stainless steel surfaces.

Two hundred and thirty individual clones of microorganisms were recovered from milk tanks and milking machine surfaces at two distinct farms (Bejaja City, Algeria). Of these clones, 130 were identified as lactic acid bacteria (LAB). In addition Escherichia coli, Salmonella, Staphylococcus aureus and Pseudomonas aeruginosa species were identified in the remaining 100 isolates-spoilage isolate. These isolates were assayed for ability to form biofilms. S. aureus, Lactobacillus brevis strains LB1F2, LB14F1 and LB15F1, and Lactobacillus pentosus strains LB2F2 and LB3F2 were identified as the best biofilm formers. Besides, these LAB isolates were able to produce proteinaceous substances with antagonism against the aforementioned spoilage isolates, when grown in MRS or TSB-YE media. During the screening, L. pentosus LB3F2 exhibited the highest antibacterial activity when grown in TSB-YE medium at 30 °C. Additionally, L. pentosus LB3F2 was able to strongly hamper the adhesion of S. aureus SA3 on abiotic surfaces as polystyrene and stainless steel slides. LAB isolates did not show any hemolytic activity and all of them were sensitive to different families of antibiotic tested. It should be pointed out that LB3F2 isolate was not cytotoxic on the intestinal cells but could stimulate their metabolic activity. This report unveiled the potential of LB1F2, LB14F1, LB15F1, LB2F2, and LB3F2 isolates to be used as natural barrier or competitive exclusion organism in the food processing sector as well as a positive biofilm forming bacteria.