A comparative analysis of the ontogeny of syngnathids (pipefishes and seahorses) reveals how heterochrony contributed to their diversification.

BACKGROUND: Syngnathids are a highly derived and diverse fish clade comprising the pipefishes, pipe-horses, and seahorses. They are characterized by a plethora of iconic traits that increasingly capture the attention of biologists, including geneticists, ecologists, and developmental biologists. The current understanding of the origins of their derived body plan is, however, hampered by incomplete and limited descriptions of the early syngnathid ontogeny. RESULTS: We provide a comprehensive description of the development of Nerophis ophidion, Syngnathus typhle, and Hippocampus erectus from early cleavage stages to release from the male brooding organ and beyond, including juvenile development. We comparatively describe skeletogenesis with a particular focus on dermal bony plates, the snout-like jaw morphology, and appendages. CONCLUSIONS: This most comprehensive and detailed account of syngnathid development to date suggests that convergent phenotypes (e.g., reduction and loss of the caudal fins), likely arose by distinct ontogenetic means in pipefishes and seahorses. Comparison of the ontogenetic trajectories of S. typhle and H. erectus provides indications that characteristic features of the seahorse body plan result from developmental truncation. Altogether, this work provides a valuable resource and framework for future research to understand the evolution of the outlandish syngnathid morphology from a developmental perspective.

The anatomy of the head muscles in caecilians (Amphibia: Gymnophiona): Variation in relation to phylogeny and ecology?

In limbless fossorial vertebrates such as caecilians (Gymnophiona), head-first burrowing imposes severe constraints on the morphology and overall size of the head. As such, caecilians developed a unique jaw-closing system involving the large and well-developed m. interhyoideus posterior, which is positioned in such a way that it does not significantly increase head diameter. Caecilians also possess unique muscles among amphibians. Understanding the diversity in the architecture and size of the cranial muscles may provide insights into how a typical amphibian system was adapted for a head-first burrowing lifestyle. In this study, we use dissection and non-destructive contrast-enhanced micro-computed tomography (µCT) scanning to describe and compare the cranial musculature of 13 species of caecilians. Our results show that the general organization of the head musculature is rather constant across extant caecilians. However, the early-diverging Rhinatrema bivittatum mainly relies on the 'ancestral' amphibian jaw-closing mechanism dominated by the m. adductores mandibulae, whereas other caecilians switched to the use of the derived dual jaw-closing mechanism involving the additional recruitment of the m. interhyoideus posterior. Additionally, the aquatic Typhlonectes show a greater investment in hyoid musculature than terrestrial caecilians, which is likely related to greater demands for ventilating their large lungs, and perhaps also an increased use of suction feeding. In addition to three-dimensional interactive models, our study provides the required quantitative data to permit the generation of accurate biomechanical models allowing the testing of further functional hypotheses.

A methodological exploration to study 2D arm kinematics in Ophiuroidea (Echinodermata).

Brittle stars, unlike most other echinoderms, do not use their small tube feet for locomotion but instead use their flexible arms to produce a rowing or reverse rowing movement. They are among the fastest-moving echinoderms with the ability of complex locomotory behaviors. Considering the high species diversity and variability in morphotypes, a proper understanding of intra- and interspecies variation in arm flexibility and movement is lacking. This study focuses on the exploration of the methods to investigate the variability in brittle star locomotion and individual arm use. We performed a two-dimensional (2D) image processing on horizontal movement only. The result indicated that sinuosity, disc displacement and arm angle are important parameters to interpret ophiuroid locomotion. A dedicated Python script to calculate the studied movement parameters and visualize the results applicable to all 5-armed brittle stars was developed. These results can serve as the basis for further research in robotics inspired by brittle star locomotion.

The evolutionary relationship between arm vertebrae shape and ecological lifestyle in brittle stars (Echinodermata: Ophiuroidea).

Ophiuroidea are one of the most diverse classes among extant echinoderms, characterized by their flexible arms composed of a series of ossicles called vertebrae, articulating with each other proximally and distally. Their arms show a wide range of motion, important for feeding and locomotion, associated with their epizoic and non-epizoic lifestyles. It remains to be explored to what degree the phenotypic variation in these ossicles also reflects adaptations to these lifestyles, rather than only their phylogenetic affinity. In this study, we analyzed the 3D shape variation of six arm vertebrae from the middle and distal parts of an arm in 12 species, belonging to the intertidal, subtidal and bathyal zones and showing epizoic and non-epizoic behaviors. A PERMANOVA indicated a significant difference in ossicle morphology between species and between lifestyles. A principal component analysis showed that the morphology of epizoic ophiuroids is distinct from non-epizoic ones; which may reflect variation in arm function related to these different lifestyles. The Phylogenetic MANOVA and phylogenetic signal analysis showed that shape variation in the vertebral articulation seems to reflect ecological and functional adaptations, whereas phylogeny controls more the lateral morphology of the vertebrae. This suggests a convergent evolution through ecological adaptation to some degree, indicating that some of these characters may have limited taxonomic value.

Regional differences in vertebral shape along the axial skeleton in caecilians (Amphibia: Gymnophiona).

Caecilians are elongate, limbless and annulated amphibians that, as far as is known, all have an at least partly fossorial lifestyle. It has been suggested that elongate limbless vertebrates show little morphological differentiation throughout the postcranial skeleton. However, relatively few studies have explored the axial skeleton in limbless tetrapods. In this study, we used µCT data and three-dimensional geometric morphometrics to explore regional differences in vertebral shape across a broad range of caecilian species. Our results highlight substantial differences in vertebral shape along the axial skeleton, with anterior vertebrae being short and bulky, whereas posterior vertebrae are more elongated. This study shows that despite being limbless, elongate tetrapods such as caecilians still show regional heterogeneity in the shape of individual vertebrae along the vertebral column. Further studies are needed, however, to understand the possible causes and functional consequences of the observed variation in vertebral shape in caecilians.

Is vertebral shape variability in caecilians (Amphibia: Gymnophiona) constrained by forces experienced during burrowing?

Caecilians are predominantly burrowing, elongate, limbless amphibians that have been relatively poorly studied. Although it has been suggested that the sturdy and compact skulls of caecilians are an adaptation to their head-first burrowing habits, no clear relationship between skull shape and burrowing performance appears to exist. However, the external forces encountered during burrowing are transmitted by the skull to the vertebral column, and, as such, may impact vertebral shape. Additionally, the muscles that generate the burrowing forces attach onto the vertebral column and consequently may impact vertebral shape that way as well. Here, we explored the relationships between vertebral shape and maximal in vivo push forces in 13 species of caecilian amphibians. Our results show that the shape of the two most anterior vertebrae, as well as the shape of the vertebrae at 90% of the total body length, is not correlated with peak push forces. Conversely, the shape of the third vertebrae, and the vertebrae at 20% and 60% of the total body length, does show a relationship to push forces measured in vivo. Whether these relationships are indirect (external forces constraining shape variation) or direct (muscle forces constraining shape variation) remains unclear and will require quantitative studies of the axial musculature. Importantly, our data suggest that mid-body vertebrae may potentially be used as proxies to infer burrowing capacity in fossil representatives.

The relationship between head shape, head musculature and bite force in caecilians (Amphibia: Gymnophiona).

Caecilians are enigmatic limbless amphibians that, with a few exceptions, all have an at least partly burrowing lifestyle. Although it has been suggested that caecilian evolution resulted in sturdy and compact skulls as an adaptation to their head-first burrowing habits, no relationship between skull shape and burrowing performance has been demonstrated to date. However, the unique dual jaw-closing mechanism and the osteological variability of their temporal region suggest a potential relationship between skull shape and feeding mechanics. Here, we explored the relationships between skull shape, head musculature and in vivo bite forces. Although there is a correlation between bite force and external head shape, no relationship between bite force and skull shape could be detected. Whereas our data suggest that muscles are the principal drivers of variation in bite force, the shape of the skull is constrained by factors other than demands for bite force generation. However, a strong covariation between the cranium and mandible exists. Moreover, both cranium and mandible shape covary with jaw muscle architecture. Caecilians show a gradient between species with a long retroarticular process associated with a large and pennate-fibered m. interhyoideus posterior and species with a short process but long and parallel-fibered jaw adductors. Our results demonstrate the complexity of the relationship between form and function of this jaw system. Further studies that focus on factors such as gape distance or jaw velocity will be needed in order to fully understand the evolution of feeding mechanics in caecilians.

Ontogenetic divergence generates novel phenotypes in hybrid cichlids.

Hybridization is suggested to contribute to ecomorphological and taxonomic diversity in lacustrine East African cichlids. This is supported by studies demonstrating that genetic diversity within lake radiations has been influenced by hybridization events, leading to extensive phenotypic differentiation of genetically closely related species. Hybrid persistence and speciation in sympatry with gene flow can be explained by pleiotropy in traits involved in reproductive isolation; however, little attention has been given to how trait differentiation is established during hybrid ontogeny, and how this may relate to trophic and locomotor specialization. This study compares body shape changes in a Lake Victoria cichlid hybrid throughout its post-hatch ontogeny to those of its parental species. Across the considered age/size categories, hybrids occupy a distinct and intermediate morphological space, yet where several transgressive traits emerge. A between-group principal component analysis on body shapes across size categories reveals axes of shape variation exclusive to the hybrids in the youngest/smallest size categories. Shape differences in the hybrids involved morphological traits known to be implicated in trophic and locomotor specializations in the parental species. Combined, our findings suggest that phenotypic divergence in the hybrid can lead to functional differences that may potentially release them to some degree from competition with the parental species. These findings agree with recent literature that addresses the potential importance of hybridization for the unusually recent origin of the Lake Victoria cichlid super-species flock.

Body size miniaturization in a lineage of colubrid snakes: Implications for cranial anatomy.

As body size strongly determines the biology of an organism at all levels, it can be expected that miniaturization comes with substantial structural and functional constraints. Dwarf snakes of the genus Eirenis are derived from big, surface-dwelling ancestors, considered to be similar to those of the sister genus Dolichophis. To better understand the structural implications of miniaturization on the feeding apparatus in Eirenis, the morphology of the cranial musculoskeletal system of Dolichophis schmidti was compared with that of the miniature Eirenis punctatolineatus and E. persicus using high-resolution µCT data. The gape index was compared between D. schmidti and 14 Eirenis species. Our results show a relatively increased neurocranium size and decreased maximal jaw muscle force in E. persicus, compared with the D. schmidti, and an intermediate situation in E. punctatolineatus. A significant negative allometry in gape index relative to body size is observed across the transition from the Dolichophis to Pediophis and Eirenis subgenera. However, the gape index relative to head size showed a significant negative allometry only across the transition from the Dolichophis to Pseudocyclophis subgenus. In Dolichophis-Eirenis dwarfing lineages, different structural patterns are observed through miniaturization, indicating that overcoming the challenge of miniaturization has achieved via different adaptations.

Under pressure: the relationship between cranial shape and burrowing force in caecilians (Gymnophiona).

Caecilians are elongate, limbless and annulated amphibians that, with the exception of one aquatic family, all have an at least partly fossorial lifestyle. It has been suggested that caecilian evolution resulted in sturdy and compact skulls with fused bones and tight sutures, as an adaptation to their head-first burrowing habits. However, although their cranial osteology is well described, relationships between form and function remain poorly understood. In the present study, we explored the relationship between cranial shape and in vivo burrowing forces. Using micro-computed tomography (µCT) data, we performed 3D geometric morphometrics to explore whether cranial and mandibular shapes reflected patterns that might be associated with maximal push forces. The results highlight important differences in maximal push forces, with the aquatic Typhlonectes producing a lower force for a given size compared with other species. Despite substantial differences in head morphology across species, no relationship between overall skull shape and push force could be detected. Although a strong phylogenetic signal may partly obscure the results, our conclusions confirm previous studies using biomechanical models and suggest that differences in the degree of fossoriality do not appear to be driving the evolution of head shape.

From yellow to silver: Transforming cranial morphology in European eel (Anguilla anguilla).

The European eel (Anguilla anguilla) has been extensively studied, especially because of its highly specialized migratory behaviour associated with substantial phenotypic transformations. During this migration, one of those transformations the eel undergoes is from yellow to silver eel, a process known as silvering. Although the cranial morphology during the earlier glass, elver and yellow eel stages are well studied, little is known about actual morphological changes during the transformation process from the yellow to the silver eel stage. Yet, literature suggests drastic changes in musculoskeletal anatomy. Here, we investigated the cranial musculoskeletal morphology of 11 male European eels at different stages during silvering, resulting both from natural and artificial maturation. Using 3D-reconstructed µCT data of the head, the skull and cranial muscles associated with jaw closing and respiration were studied. Eye size was used as a proxy for the silvering stage. Size-adjusted jaw muscle volumes increased during silvering, although insignificantly. Accordingly, a near-significant increase in bite force was observed. Respiratory muscles size did increase significantly during silvering, however. Considering the eel's long migration, which often includes deep and thus potentially oxygen-poor environments, having a better performing respiratory system may facilitate efficient migration. Both overall skull dimensions and specifically orbit size increased with eye index, suggesting they play a role in accommodating the enlarging eyes during silvering. Finally, artificially matured eels had a wider and taller skull, as well as larger jaw muscles than wild silver eels. This could be caused (a) by different conditions experienced during the yellow eel stage, which are maintained in the silver eel stage, (b) by side effects of hormonal injections or (c) be part of the maturation process as artificially induced silver eels had a higher eye index than the wild silver eels.

Extensive chondroid bone in juvenile duck limbs hints at accelerated growth mechanism in avian skeletogenesis.

Modern altricial birds are the fastest growing vertebrates, whereas various degrees of precocity (functional maturity) result in slower growth. Diaphyseal osteohistology, the best proxy for inferring relative growth rates in fossils, suggests that in the earliest birds, posthatching growth rates were more variable than in modern representatives, with some showing considerably slow growth that was attributed to their assumed precocial flight abilities. For finding clues how precocial or altricial skeletogenesis and related growth acceleration could be traced in avian evolution, as a case study we investigated the growing limb diaphyseal histology in an ontogenetic series of ducks which, among several other avian taxa, show a combination of altricial wing and precocial leg development. Here we report the unexpected discovery that chondroid bone, a skeletal tissue family intermediate between cartilage and bone, extensively contributes to the development of limb bone shaft in ducks up to at least 30 days posthatching age. To our knowledge, chondroid bone has never been reported in such quantities and with an ontogenetically extended deposition period in post-embryonic, non-pathological periosteal bone formation of any tetrapod limb. It shows transitional cellular/lacunar morphologies and matrix staining properties between cartilage and woven bone and takes a significant part in the diametric growth of the limb bone shaft. Its amount and distribution through duckling ontogeny seems to be associated with the disparate functional and growth trajectories of the altricial wings vs. precocial legs characteristic of duck limb development. The presence of isogenous cell groups in the periosteal chondroid bone implies that cartilage-like interstitial growth took place before matrix mineralization complementing appositional bone growth. Based on these characteristics and on its fast formation rate in all previously reported normal as well as pathological cases, we suggest that chondroid bone in ducks significantly accelerates diametric limb bone growth. Related to this growth acceleration, we hypothesize that chondroid bone may be generally present in the growing limb bones of modern birds and hence may have key skeletogenic importance in achieving extreme avian growth rates and placing birds among the fastest growing vertebrates. Thus, we encourage future studies to test this hypothesis by investigating the occurrence of chondroid bone in a variety of precocial and altricial bird species, and to explore the presence of similar tissues in the growing limbs of other extant and extinct tetrapods in order to understand the evolutionary significance of chondroid bone in accelerated appendicular skeletogenesis.

A digital dissection of two teleost fishes: comparative functional anatomy of the cranial musculoskeletal system in pike (Esox lucius) and eel (Anguilla anguilla).

Advances in X-ray computed tomography (CT) have led to a rise in the use of non-destructive imaging methods in comparative anatomy. Among these is contrast-enhanced CT scanning, which employs chemical stains to visualize soft tissues. Specimens may then be 'digitally dissected', producing detailed, three-dimensional digital reconstructions of the soft- and hard-tissue anatomy, allowing examination of anatomical structures in situ and making accurate measurements (lengths, volumes, etc.). Here, we apply this technique to two species of teleost fish, providing one of the first comprehensive three-dimensional (3D) descriptions of teleost cranial soft tissue and quantifying differences in muscle anatomy that may be related to differences in feeding ecology. Two species with different feeding ecologies were stained, scanned and imaged to create digital 3D musculoskeletal reconstructions: Esox lucius (Northern Pike), predominantly a suction feeder; and Anguilla anguilla (European eel), which captures prey predominantly by biting. Muscle cross-sectional areas were calculated and compared between taxa, focusing on muscles that serve important roles in feeding. The adductor mandibulae complex - used in biting - was larger in Esox than Anguilla relative to head size. However, the overall architecture of the adductor mandibulae was also very different between the two species, with that of Anguilla better optimized for delivering forceful bites. Levator arcus palatini and sternohyoideus - which are used in suction feeding - are larger in Esox, whereas the levator operculi is larger in Anguilla. Therefore, differences in the size of functionally important muscles do not necessarily correlate neatly with presumed differences in feeding mode.

Morphological and histological characterization of an ectopically mineralized structure in a gilthead sea bream Sparus aurata with opercular deformation.

In this study, we describe an abnormal ectopically mineralized structure (EMS) that was found inside the skull of a juvenile Sparus aurata that also showed a bilateral opercular deformation. The overall phenotype and tissue composition were studied using micro-CT scanning and histological analyses. The ectopic structure occupies a large volume of the brain cavity, partially extruding into the gill cavity. It shows a dense mineralization and an extracellular matrix-rich phenotype, with variation in both the morphology and size of the cell lacunae, combined with an irregular fibre organization inside the matrix. This study is the first to report such an EMS in a juvenile teleost fish, where the tissue does not resemble any other connective tissue type described in bony fish so far. The tissue phenotype seems to rule out that the EMS corresponds to a tumorous cartilage. Yet, it is rather reminiscent of a highly mineralized structure found in cartilaginous fish, where it is suggested to be associated with damage repair.

Building trophic specializations that result in substantial niche partitioning within a young adaptive radiation.

Dietary partitioning often accompanies the increased morphological diversity seen during adaptive radiations within aquatic systems. While such niche partitioning would be expected in older radiations, it is unclear how significant morphological divergence occurs within a shorter time period. Here we show how differential growth in key elements of the feeding mechanism can bring about pronounced functional differences among closely related species. An incredibly young adaptive radiation of three Cyprinodon species residing within hypersaline lakes in San Salvador Island, Bahamas, has recently been described. Characterized by distinct head shapes, gut content analyses revealed three discrete feeding modes in these species: basal detritivory as well as derived durophagy and lepidophagy (scale-feeding). We dissected, cleared and stained, and micro-CT scanned species to assess functionally relevant differences in craniofacial musculoskeletal elements. The widespread feeding mode previously described for cyprinodontiforms, in which the force of the bite may be secondary to the requisite dexterity needed to pick at food items, is modified within both the scale specialist and the durophagous species. While the scale specialist has greatly emphasized maxillary retraction, using it to overcome the poor mechanical advantage associated with scale-eating, the durophage has instead stabilized the maxilla. In all species the bulk of the adductor musculature is composed of AM A1. However, the combined masses of both adductor mandibulae (AM) A1 and A3 in the scale specialist were five times that of the other species, showing the importance of growth in functional divergence. The scale specialist combines plesiomorphic jaw mechanisms with both a hypertrophied AM A1 and a slightly modified maxillary anatomy (with substantial functional implications) to generate a bite that is both strong and allows a wide range of motion in the upper jaw, two attributes that normally tradeoff mechanically. Thus, a significant feeding innovation (scale-eating, rarely seen in fishes) may evolve based largely on allometric changes in ancestral structures. Alternatively, the durophage shows reduced growth with foreshortened jaws that are stabilized by an immobile maxilla. Overall, scale specialists showed the most divergent morphology, suggesting that selection for scale-biting might be stronger or act on a greater number of traits than selection for either detritivory or durophagy. The scale specialist has colonized an adaptive peak that few lineages have climbed. Thus, heterochronic changes in growth can quickly produce functionally relevant change among closely related species.

Kinematics of chisel-tooth digging by African mole-rats.

Mole-rats are known to use their protruding, chisel-like incisors to dig underground networks of tunnels, but it remains unknown how these incisors are used to break and displace the soil. Theoretically, different excavation strategies can be used. Mole-rats could either use their head depressor muscles to power scooping motions of the upper incisors (by nose-down head rotations) or the lower incisors (by nose-up head rotations), or their jaw adductors to grab and break the soil after penetrating both sets of incisors into the ground, or a combination of these mechanisms. To identify how chisel-tooth digging works, a kinematic analysis of this behaviour was performed based on high-speed videos of 19 individuals from the African mole-rat species Fukomys micklemi placed inside transparent tubes in a laboratory setting. Our analysis showed that the soil is penetrated by both the upper and lower incisors at a relatively high gape angle, generally with the head rotated nose-up. Initially, the upper incisors remain approximately stationary to function as an anchor to allow an upward movement of the lower incisors to grab the soil. Next, a quick, nose-down rotation of the head further detaches the soil and drops the soil below the head. Consequently, both jaw adduction and head depression are jointly used to power tooth-digging in F. micklemi The same mechanism, but with longer digging cycles, and soil being thrown down at smaller gape sizes, was used when digging in harder soil.

Diet-induced phenotypic plasticity in European eel (Anguilla anguilla).

Two phenotypes are present within the European eel population: broad-heads and narrow-heads. The expression of these phenotypes has been linked to several factors, such as diet and differential growth. The exact factors causing this dimorphism, however, are still unknown. In this study, we performed a feeding experiment on glass eels from the moment they start to feed. Eels were either fed a hard diet, which required biting and spinning behavior, or a soft diet, which required suction feeding. We found that the hard feeders develop a broader head and a larger adductor mandibulae region than eels that were fed a soft diet, implying that the hard feeders are capable of larger bite forces. Next to this, soft feeders develop a sharper and narrower head, which could reduce hydrodynamic drag, allowing more rapid strikes towards their prey. Both phenotypes were found in a control group, which were given a combination of both diets. These phenotypes were, however, not as extreme as the hard or the soft feeding group, indicating that some specimens are more likely to consume hard prey and others soft prey, but that they do not selectively eat one of both diets. In conclusion, we found that diet is a major factor influencing head shape in European eel and this ability to specialize in feeding on hard or soft prey could decrease intra-specific competition in European eel populations.

Kinematics of mouthbrooding in Oreochromis niloticus (Cichlidae).

Many species from several different families of fishes perform mouthbrooding, where one of the sexes protects and ventilates the eggs inside the mouth cavity. This ventilation behaviour differs from gill ventilation outside the brooding period, as the normal, small-amplitude suction-pump respiration cycles are alternated with actions including near-simultaneous closed-mouth protrusions and high-amplitude depressions of the hyoid. The latter is called churning, referring to its hypothetical function in moving around and repositioning the eggs by a presumed hydrodynamic effect of the marked shifts in volume along the mouth cavity. We tested the hypothesis that churning causes the eggs located posteriorly in the mouth cavity to move anteriorly away from the gill entrance. This would prevent or clear accumulations of brood at the branchial basket, which would otherwise hinder breathing by the parent. Dual-view videos of female Nile tilapias (Oreochromis niloticus) during mouthbrooding showed that churning involves a posterior-to-anterior wave of expansion and compression of the head volume. Flow visualisation with polyethylene microspheres revealed a significant inflow of water entering the gill slits at the zone above the pectoral fin base, followed by a predominantly ventral outflow passing the ventrolaterally flapping branchiostegal membranes. X-ray videos indicated that particularly the brood located close to the gills is moved anteriorly during churning. These data suggest that, in addition to mixing of the brood to aid its oxygenation, an important function of the anterior flow through the gills and buccal cavity during churning is to prevent clogging of the eggs near the gills.

Musculoskeletal anatomy and feeding performance of pre-feeding engyodontic larvae of the European eel (Anguilla anguilla).

Being part of the elopomorph group of fishes, Anguillidae species show a leptocephalus larval stage. However, due to largely unknown spawning locations and habitats of their earliest life stages, as well as their transparency, these Anguilla larvae are rarely encountered in nature. Therefore, information regarding the early life history of these larvae, including their exogenous feeding strategy and feeding performance, is rather scarce. To better understand the structural basis and functional performance of larval feeding in captivity, the functional morphology of the cranial musculoskeletal system in pre- and first-feeding engyodontic leptocephali of the European eel (Anguilla anguilla) was studied. A 3D reconstruction of the feeding apparatus (head of the leptocephali < 1 mm) was used to visualize and describe the musculoskeletal changes throughout these stages. To analyze the ontogenetic changes in the functionality of the feeding apparatus towards the active feeding phase, 3D data of joints, levers and muscles derived from the reconstructions were used to estimate bite and joint reaction forces (JRFs). Observing a maximum estimated bite force of about 65 µN (and corresponding JRFs of 260 µN), it can be hypothesized that leptocephalus larvae are functionally constrained to feed only on soft food particles. Additionally, potential prey items are size delimited, based on the theoretically estimated average gape of these larvae of about 100 µm. This hypothesis appears to be in line with recent observations of a diet consisting of small and/or gelatinous prey items (Hydrozoa, Thaliacea, Ctenophora, Polycystenia) found in the guts of euryodontic leptocephalus larvae.

Mechanics of snout expansion in suction-feeding seahorses: musculoskeletal force transmission.

Seahorses and other syngnathid fishes rely on a widening of the snout to create the buccal volume increase needed to suck prey into the mouth. This snout widening is caused by abduction of the suspensoria, the long and flat bones outlining the lateral sides of the mouth cavity. However, it remains unknown how seahorses can generate a forceful abduction of the suspensoria. To understand how force is transmitted to the suspensoria via the hyoid and the lower jaw, we performed mathematical simulations with models based on computerized tomography scans of Hippocampus reidi. Our results show that the hinge joint between the left and right hyoid bars, as observed in H. reidi, allows for an efficient force transmission to the suspensorium from a wide range of hyoid angles, including the extremely retracted hyoid orientations observed in vivo for syngnathids. Apart from the hyoid retraction force by the sternohyoideus-hypaxial muscles, force generated in the opposite direction on the hyoid by the mandibulohyoid ligament also has an important contribution to suspensorium abduction torque. Forces on the lower jaw contribute only approximately 10% of the total suspensorium torque. In particular, when dynamical aspects of hyoid retraction are included in the model, a steep increase is shown in suspensorium abduction torque at highly retracted hyoid positions, when the linkages to the lower jaw counteract further hyoid rotation in the sagittal plane. A delayed strain in these linkages allows syngnathids to postpone suction generation until the end of cranial rotation, a fundamental difference from non-syngnathiform fishes.