RESUMO
The development of peroxidase mimic nanocatalysts is relevant for oxidation reactions in biosensing, environmental monitoring and green chemical processes. Several nanomaterials have been proposed as peroxidase mimic, the majority of which consists of noble metals and oxide nanoparticles (NPs). Yet, there is still limited information about how the change in the composition influences their catalytic activity. Here, the peroxidase mimic behaviour of gold NPs is compared to a traditional nanoalloy as Au-Ag and to the Au-Fe and the Au-Co nanoalloys, which were not tested before as oxidation catalysis. Since the alloys of gold with iron and cobalt are thermodynamically unstable, laser ablation in liquid (LAL) is exploited for the synthesis of these NPs. Using LAL, no chemical stabilizers or capping agents are present on the NPs surface, allowing the evaluation of the oxidation behaviour as a function of the alloy composition. The results point to the importance of surface gold atoms in the catalytic process, but also indicate the possibility of obtaining active nanocatalysts with a lower content of Au by alloying it with iron, which is earth-abundant, non-toxic and low cost. Overall, Au nanoalloys are worth consideration as a more sustainable alternative to pure Au nanocatalysts for oxidation reactions.
RESUMO
Metal oxides are a class of material of particular interest for catalytic purposes. Among them the iron oxide as a monolayer supported on gold, FeO/Au, stands out for its capability to promote the CO oxidation and the dissociation of O2 and H2. In this work, we use density functional theory calculations to characterize interfacial properties of this heterostructure. We consider a FeO/Au realistic model system, managing to reproduce the moiré pattern experimentally found. Specific features of the high-symmetry domains of the moiré are identified, providing a robust ground for establishing a structure-activity relationship and guessing how the surface would behave in catalytic conditions. We also describe a strategy to model smaller systems representative of each high-symmetry domains of the moiré, which will be useful in the future to model catalytic reaction mechanisms.
RESUMO
The transition toward renewable energy sources requires low-cost, efficient, and durable electrocatalysts for green H2 production. Herein, an easy and highly scalable method to prepare MoS2 nanoparticles embedded in 3D partially reduced (pr) graphene oxide (GO) aerogel microspheres (MoS2 /prGOAMs) with controlled morphology and composition is described. Given their peculiar center-diverging mesoporous structure, which allows easy access to the active sites and optimal mass transport, and their efficient electron transfer facilitated by the intimate contact between the MoS2 and the 3D connected highly conductive pr-GO sheets, these materials exhibit a remarkable electrocatalytic activity in the hydrogen evolution reaction (HER). Ni atoms, either as single Ni atoms or NiO aggregates are then introduced in the MoS2 /prGOAMs hybrids, to facilitate water dissociation, which is the slowest step in alkaline HER, producing a bifunctional catalyst. After optimization, Ni-promoted MoS2 /prGOAMs obtained at 500 °C reach a remarkable η10 (overpotential at 10 mA cm-2 ) of 160 mV in 1 m KOH and 174 mV in 0.5 m H2 SO4 . Moreover, after chronopotentiometry tests (15 h) at a current density of 10 mA cm-2 , the η10 value improves to 147 mV in alkaline conditions, indicating an exceptional stability.
RESUMO
Nonequilibrium nanoalloys are metastable solids obtained at the nanoscale under nonequilibrium conditions that allow the study of kinetically frozen atoms and the discovery of new physical and chemical properties. However, the stabilization of metastable phases in the nanometric size regime is challenging and the synthetic route should be easy and sustainable, for the nonequilibrium nanoalloys to be practically available. Here we report on the one-step laser ablation synthesis in solution (LASiS) of nonequilibrium Au-Co alloy nanoparticles (NPs) and their characterization on ensembles and at the single nanoparticle level. The NPs are obtained as a polycrystalline solid solution stable in air and water, although surface cobalt atoms undergo oxidation to Co(II). Since gold is a renowned plasmonic material and metallic cobalt is ferromagnetic at room temperature, these properties are both found in the NPs. Besides, surface conjugation with thiolated molecules is possible and it was exploited to obtain colloidally stable solutions in water. Taking advantage of these features, an array of magnetic-plasmonic dots was obtained and used for surface-enhanced Raman scattering experiments. Overall, this study confirms that LASiS is an effective method for the formation of kinetically stable nonequilibrium nanoalloys and shows that Au-Co alloy NPs are appealing magnetically responsive plasmonic building blocks for several nanotechnological applications.
RESUMO
Dye-sensitized photoelectrochemical cells represent an appealing solution for artificial photosynthesis, aimed at the conversion of solar light into fuels or commodity chemicals. Extensive efforts have been directed towards the development of photoelectrodes combining semiconductor materials and organic dyes; the use of molecular components allows to tune the absorption and redox properties of the material. Recently, we have reported the use of a class of pentacyclic quinoid organic dyes (KuQuinone) chemisorbed onto semiconducting tin oxide as photoanodes for water oxidation. In this work, we investigate the effect of the SnO2 semiconductor thickness and morphology and of the dye-anchoring group on the photoelectrochemical performance of the electrodes. The optimized materials are mesoporous SnO2 layers with 2.5 µm film thickness combined with a KuQuinone dye with a 3-carboxylpropyl-anchoring chain: these electrodes achieve light-harvesting efficiency of 93% at the maximum absorption wavelength of 533 nm, and photocurrent density J up to 350 µA/cm2 in the photoelectrochemical oxidation of ascorbate, although with a limited incident photon-to-current efficiency of 0.075%. Calculations based on the density functional theory (DFT) support the role of the reduced species of the KuQuinone dye via a proton-coupled electron transfer as the competent species involved in the electron transfer to the tin oxide semiconductor. Finally, a preliminary investigation of the photoelectrodes towards benzyl alcohol oxidation is presented, achieving photocurrent density up to 90 µA/cm2 in acetonitrile in the presence of N-hydroxysuccinimide and pyridine as redox mediator and base, respectively. These results support the possibility of using molecular-based materials in synthetic photoelectrochemistry.
RESUMO
Metal-organic frameworks (MOFs) can act as a platform for the heterogenization of molecular catalysts, providing improved stability, allowing easy catalyst recovery and a route toward structural elucidation of the active catalyst. We have developed a MOF, 1, possessing vacant N,N-chelating sites which are accessible via the porous channels that penetrate the structure. In the present work, cationic rhodium(I) norbornadiene (NBD) and bis(ethylene) (ETH) complexes paired with both noncoordinating and coordinating anions have been incorporated into the N,N-chelation sites of 1 via postsynthetic metalation and facile anion exchange. Exploiting the crystallinity of the host framework, the immobilized Rh(I) complexes were structurally characterized using X-ray crystallography. Ethylene hydrogenation catalysis by 1·[Rh(NBD)]X and 1·[Rh(ETH)2]X (X = Cl and BF4) was studied in the gas phase (2 bar, 46 °C) to reveal that 1·[Rh(ETH)2](BF4) was the most active catalyst (TOF = 64 h-1); the NBD materials and the chloride salt were notably less active. On the basis of these observations, the activity of the Rh(I) bis(ethylene) complexes, 1·[Rh(ETH)2]BF4 and 1·[Rh(ETH)2]Cl, in butene isomerization was also studied using gas-phase NMR spectroscopy. Under one bar of butene at 46 °C, 1·[Rh(ETH)2]BF4 rapidly catalyzes the conversion of 1-butene to 2-butene with a TOF averaging 2000 h-1 over five cycles. Notably, the chloride derivative, 1 [Rh(ETH)2]Cl displays negligible activity in comparison. XPS analysis of the postcatalysis sample, supported by DFT calculations, suggest that the catalytic activity is inhibited by the strong interactions between a Rh(III) allyl hydride intermediate and the chloride anion.
RESUMO
The relationship between composition and plasmonic properties in noble metal nanoalloys is still largely unexplored. Yet, nanoalloys of noble metals, such as gold, with transition elements, such as iron, have unique properties and a number of potential applications, ranging from nanomedicine to magneto-plasmonics and plasmon-enhanced catalysis. Here, we investigate the localized surface plasmon resonance at the level of the single Au-Fe nanoparticle by applying a strategy that combines experimental measurements using near field electron energy loss spectroscopy with theoretical studies via a full wave numerical analysis and density functional theory calculations of electronic structure. We show that, as the iron fraction increases, the plasmon resonance is blue-shifted and significantly damped, as a consequence of the changes in the electronic band structure of the alloy. This allows the identification of three relevant phenomena to be considered in the design and realization of any plasmonic nanoalloy, specifically: the appearance of new states around the Fermi level; the change in the free electron density of the metal; and the blue shift of interband transitions. Overall, this study provides new opportunities for the control of the optical response in Au-Fe and other plasmonic nanoalloys, which are useful for the realization of magneto-plasmonic devices for molecular sensing, thermo-plasmonics, bioimaging, photocatalysis, and the amplification of spectroscopic signals by local field enhancement.
RESUMO
Graphene and h-BN are grown by chemical vapor deposition in ultra high vacuum conditions on the Pt(110) surface. Scanning tunneling microscopy measurements and low-energy electron diffraction data indicate that graphene forms a variety of differently oriented incommensurate domains although with a strong preference to align its [Formula: see text] direction with the [Formula: see text] direction of Pt. Meanwhile, h-BN exhibits a c(8 × 10) commensurate superstructure, which presents a high level of defectivity that implies local variation of the periodicity (i.e. mixed c(8 × 10) and c(8 × 12) patches) and the introduction of local defects. The combination of advanced photoemission spectroscopy data (angle-resolved photoemission spectroscopy from the valence band) and ab initio calculations indicates that both 2D materials interact weakly with the substrate: graphene exhibits neutral doping and is morphologically flat, even if it nucleates on the relatively highly corrugated rectangular (110) surface. In the case of h-BN, the interaction is slightly stronger and is characterized by a small electron transfer from surface Pt atoms to nitrogen atoms. The (110) termination of Pt is therefore a quite interesting surface for the growth of 2D materials because given its low symmetry, it may favor the growth of selectively oriented domains but does not affect their pristine electronic properties.
RESUMO
In this paper, we study the magnetic and chemical properties of Fe/graphene vertically stacked ultrathin films by means of X-ray magnetic circular dichroism and X-ray photoelectron spectroscopy. We compare two systems: an iron layer deposited directly on top of the Pt(111) surface, and an intercalated Fe film sandwiched between graphene and Pt(111). The system composed of a submonolayer Fe deposited directly on Pt(111) maintains an out-of-plane easy magnetization axis, even if it has been covered by graphene that quenches effectively the magnetic orbital moment of Fe. However, when the Fe coverage is increased above 1 ML the easy magnetization axis flips in the in-plane direction.
RESUMO
Composite materials of titania and graphitic carbon, and their optimized synthesis are highly interesting for application in sustainable energy conversion and storage. We report on planar C/TiO2 composite films that are prepared on a polycrystalline titanium substrate by carbothermal treatment of compact anodic TiO2 with acetylene. This thin film material allows for the study of functional properties of C/TiO2 as a function of chemical composition and structure. The chemical and structural properties of the composite on top of individual Ti substrate grains are examined by scanning photoelectron microscopy and micro-Raman spectroscopy. Through comparison of these data with electron backscatter diffraction, it is found that the amount of generated carbon and the grade of anodic film crystallinity correlate with the crystallographic orientation of the Ti substrate grains. On top of Ti grains with â¼(0001) orientations the anodic TiO2 exhibits the highest grade of crystallinity, and the composite contains the highest fraction of graphitic carbon compared to Ti grains with other orientations. This indirect effect of the Ti substrate grain orientation yields new insights into the activity of TiO2 towards the decomposition of carbon precursors.
RESUMO
Dibromotetracene molecules are deposited on the Cu(110) surface at room temperature. The complex evolution of this system has been monitored at different temperatures (i.e., 298, 523, 673, and 723â K) by means of a variety of complementary techniques that range from STM and temperature-programmed desorption (TPD) to high-resolution X-ray spectroscopy (XPS) and near-edge X-ray absorption fine structure spectroscopy (NEXAFS). State-of-the-art density-functional calculations were used to determine the chemical processes that take place on the surface. After deposition at room temperature, the organic molecules are transformed into organometallic monomers through debromination and carbon-radical binding to copper adatoms. Organometallic dimers, trimers, or small oligomers, which present copper-bridged molecules, are formed by increasing the temperature. Surprisingly, further heating to 673â K causes the formation of elongated chains along the Cu(110) close-packed rows as a consequence of radical-site migration to the thermodynamically more stable molecule heads. Finally, massive dehydrogenation occurs at the highest temperature followed by ring condensation to nanographenic patches. This study is a paradigmatic example of how intermolecular coupling can be modulated by the stepwise control of a simple parameter, such as temperature, through a sequence of domino reactions.
RESUMO
Alloy nanoparticles are characterized by the combination of multiple interesting properties, which are attractive for technological and scientific purposes. A frontier topic of this field is nanoalloys with compositions not thermodynamically allowed at ordinary temperature and pressure (i.e. metastable), because they require out-of-equilibrium synthetic approaches. Recently, laser ablation synthesis in solution (LASiS) was successfully applied for the realization of metastable nanoalloys because of the fast kinetics of nanoparticle formation. However, the role played by the chemical environment on the final composition and structure of laser generated nanoalloys still has to be fully elucidated. Here, we investigated the influence of different synthetic conditions on the LASiS of metastable nanoalloys composed of Au and Fe, such as the use of water instead of ethanol, the bubbling of inert gases and the addition of a few vol% of H2O2 and H2O. The two elements showed different reactivity when LASiS was performed in water instead of ethanol, while minor effects were observed from bubbling pure gases such as N2, Ar and CO2 in the liquid solution. Moreover, the plasmonic response and the structure of the nanoalloys were sensibly modified by adding H2O2 to water. We also found that nanoparticle production is dramatically influenced just by adding 0.2% of H2O in ethanol. These results suggest that the formation of a cavitation bubble with long lifetime and large size during LASiS is useful for the preservation of the metastable alloy composition, whereas an oxidative environment hampers the formation of metastable alloy nanoparticles. Overall, by acting on the type of solvent and solutes, we were able to switch from a traditional synthetic approach for the composition of Au-Fe nanoalloys to one using a reactive environment, which gives unconventional structures such as metal@iron-oxide nanoshells and nanocrescents of oxide supported on metal nanospheres. These results expand the knowledge about the mechanism of the formation of nanoalloys using LASiS and show how to obtain multielement nanoparticles of enormous interest for nanomedicine, plasmonics, magneto-plasmonics and catalysis.
Assuntos
Ligas/química , Metais/química , Nanopartículas , Lasers , Microscopia Eletrônica de Transmissão , Óxidos/química , Soluções , Espectrofotometria UltravioletaRESUMO
The quest for economically sustainable electrocatalysts to replace critical materials in anodes for the oxygen evolution reaction (OER) is a key goal in electrochemical conversion technologies, and, in this context, metal-organic frameworks (MOFs) offer great promise as alternative electroactive materials. In this study, a series of nanostructured electrocatalysts was successfully synthesized by growing tailored Ni-Fe-based MOFs on nitrogen-doped graphene, creating composite systems named MIL-NG-n. Their growth was tuned using a molecular modulator, revealing a non-trivial trend of the properties as a function of the modulator quantity. The most active material displayed an excellent OER performance characterized by a potential of 1.47 V (vs. RHE) to reach 10 mA cm-2, a low Tafel slope (42 mV dec-1), and a stability exceeding 18 h in 0.1 M KOH. This outstanding performance was attributed to the synergistic effect between the unique MOF architecture and N-doped graphene, enhancing the amount of active sites and the electron transfer. Compared to a simple mixture of MOFs and N-doped graphene or the deposition of Fe and Ni atoms on the N-doped graphene, these hybrid materials demonstrated a clearly superior OER performance.
RESUMO
We have grown highly controlled VOx nanoclusters on rutile TiO2(110). The combination of photoemission and photoelectron diffraction techniques based on synchrotron radiation with DFT calculations has allowed identifying these nanostructures as exotic V4O6 nanoclusters, which hold vanadyl groups, even if vanadium oxidation state is formally +3. Our theoretical investigation also indicates that on the surface of titania, vanadia mononuclear species, with oxidation states ranging from +2 to +4, can be strongly stabilized by aggregation into tetramers that are characterized by a charge transfer to the titania substrate and a consequent decrease of the electron density in the vanadium 3d levels. We then performed temperature programmed desorption experiments using methanol as probe molecule to understand the impact of these unusual electronic and structural properties on the chemical reactivity, obtaining that the V4O6 nanoclusters can selectively convert methanol to formaldehyde at an unprecedented low temperature (300 K).
RESUMO
We have investigated by photoemission spectroscopy and scanning tunnelling microscopy what are the chemical and structural changes induced by nitrogen ion implantation (500 eV) on highly oriented pyrolytic graphite and how the defects induced by this process modify the growth and thermal stability of palladium nanoparticles, deposited in situ by physical vapour deposition. Since nitrogen derived defects are mostly buried below the surface, they are not accessible for a chemical interaction with metal nanoparticles; however, the amorphization induced by the ion beam in the outermost layers of the substrate beneficially affects the metal morphology, limiting the size of the nanoparticles and improving their thermal stability. The supported nanoparticles have been tested towards the oxygen reduction reaction indicating that the electrochemical activity does not depend significantly on the ion implantation, but mostly on the amount of palladium.
RESUMO
As a semiconductor used for the photocatalytic hydrogen evolution reaction (HER), BiOBr has received intensive attention in recent years. However, the high recombination of photoexcited charge carriers results in poor photocatalytic efficiency. The combination with other photoactive semiconductors might represent a valuable approach to deal with the intrinsic limitations of the material. Given that BiOBr has a 2D structure, we propose a simple liquid-phase exfoliation method to peel BiOBr microspheres into few-layer nanosheets. By tuning the weight ratio between the precursors, we prepare a series of 2D MoS2/BiOBr van der Waals (vdW) heterojunctions and study their behaviour as (photo)electrocatalysts for the HER, finding dramatic differences as a function of weight composition. Moreover, we found that pristine 2D BiOBr and the heterojunctions, with the exception of the 1% MoS2/BiOBr composition, undergo photocorrosion, with BiOBr being reduced to metallic Bi. These findings provide useful guidelines to design novel 2D material-based (photo)electrocatalysts for the production of sustainable fuels.
RESUMO
In this work, mixed Ni/Co and Ni/Fe metal phosphides with different metal ratios were synthesized through the phosphidization of high-surface-area hydroxides grown hydrothermally on carbon cloth. The materials were characterized by means of X-ray photoemission spectroscopy, X-ray diffraction, energy dispersive X-ray analysis, and electron microscopies. The electrocatalytic performance in the electrochemical water splitting was tested in alkaline media. With the aim of determining the chemical stability of the mixed phosphides and the possible changes undergone under catalytic conditions, the materials were characterized before and after the electrochemical tests. The best performances in the hydrogen evolution reaction were achieved when synergic interactions are established among the metal centers, as suggested by the outstanding performances (50 mV to achieve 10 mA/cm2) of materials containing the highest amount of ternary compounds, i.e., NiCoP and NiFeP. The best performances in the oxygen evolution reaction were reached by the Ni-Fe materials. Under these conditions, it was demonstrated that a strong oxidation of the surface and the dissolution of the phosphide/phosphate component takes place, with the consequent formation of the corresponding metal oxides and hydroxides.
RESUMO
Unraveling structure-activity relationships is a key objective of catalysis. Unfortunately, the intrinsic complexity and structural heterogeneity of materials stand in the way of this goal, mainly because the activity measurements are area-averaged and therefore contain information coming from different surface sites. This limitation can be surpassed by the analysis of the noise in the current of electrochemical scanning tunneling microscopy (EC-STM). Herein, we apply this strategy to investigate the catalytic activity toward the hydrogen evolution reaction of monolayer films of MoSe2. Thanks to atomically resolved potentiodynamic experiments, we can evaluate individually the catalytic activity of the MoSe2 basal plane, selenium vacancies, and different point defects produced by the intersections of metallic twin boundaries. The activity trend deduced by EC-STM is independently confirmed by density functional theory calculations, which also indicate that, on the metallic twin boundary crossings, the hydrogen adsorption energy is almost thermoneutral. The micro- and macroscopic measurements are combined to extract the turnover frequency of different sites, obtaining for the most active ones a value of 30 s-1 at -136 mV vs RHE.
RESUMO
Dye-sensitized photoanodes for C-H activation in organic substrates are assembled by vacuum sublimation of a commercially available quinacridone (QNC) dye in the form of nanosized rods onto fluorine-doped tin oxide (FTO), TiO2 , and SnO2 slides. The photoanodes display extended absorption in the visible range (450-600â nm) and ultrafast photoinduced electron injection (<1â ps, as revealed by transient absorption spectroscopy) of the QNC dye into the semiconductor. The proton-coupled electron-transfer reactivity of QNC is exploited for generating a nitrogen-based radical as its oxidized form, which is competent in C-H bond activation. The key reactivity parameter is the bond-dissociation free energy (BDFE) associated with the Nâ /N-H couple in QNC of 80.5±2.3â kcal mol-1 , which enables hydrogen atom abstraction from allylic or benzylic C-H moieties. A photoelectrochemical response is indeed observed for organic substrates characterized by C-H bonds with BDFE below the 80.5â kcal mol-1 threshold, such as γ-terpinene, xanthene, or dihydroanthracene. This work provides a rational, mechanistically oriented route to the design of dye-sensitized photoelectrodes for selective organic transformations.
RESUMO
Noble metal nanoparticles are efficient converters of light into heat but typically cover a limited spectral range or have intense light scattering, resulting in unsuited for broadband thermoplasmonic applications and sunlight-driven heat generation. Here, Au-Ag alloy nanoparticles were deliberately molded with an irregular nanocoral (NC) shape to obtain broadband plasmon absorption from the visible to the near-infrared yet at a lower cost compared to pure Au nanostructures. The Au-Ag NCs are produced through a green and scalable methodology that relies on pulsed laser fragmentation in a liquid, without chemicals or capping molecules, leaving the particles surface free for conjugation with thiolated molecules and enabling full processability and easy inclusion in various matrixes. Numerical calculations showed that panchromism, i.e., the occurrence of a broadband absorption from the visible to the near-infrared region, is due to the special morphology of Au-Ag alloy NCs and consists of a purely absorptive behavior superior to monometallic Au or Ag NCs. The thermoplasmonic properties were assessed by multiwavelength light-to-heat conversion experiments and exploited for the realization of a cellulose-based solar-steam generation device with low-cost, simple design but competitive performances. Overall, here it is shown how laser light can be used to harvest solar light. Besides, the optimized broadband plasmon absorption, the green synthetic procedure, and the other set of positive features for thermoplasmonic applications of Au-Ag NCs will contribute to the development of environmentally friendly devices of practical utility in a sustainable world.