Antimicrobial peptides from Bacillus spp. and strategies to enhance their yield.

Antibiotic resistance is a growing concern that is affecting public health globally. The search for alternative antimicrobial agents has become increasingly important. Antimicrobial peptides (AMPs) produced by Bacillus spp. have emerged as a promising alternative to antibiotics, due to their broad-spectrum antimicrobial activity against resistant pathogens. In this review, we provide an overview of Bacillus-derived AMPs, including their classification into ribosomal (bacteriocins) and non-ribosomal peptides (lipopeptides and polyketides). Additionally, we delve into the molecular mechanisms of AMP production and describe the key biosynthetic gene clusters involved. Despite their potential, the low yield of AMPs produced under normal laboratory conditions remains a challenge to large-scale production. This review thus concludes with a comprehensive summary of recent studies aimed at enhancing the productivity of Bacillus-derived AMPs. In addition to medium optimization and genetic manipulation, various molecular strategies have been explored to increase the production of recombinant antimicrobial peptides (AMPs). These include the selection of appropriate expression systems, the engineering of expression promoters, and metabolic engineering. Bacillus-derived AMPs offer great potential as alternative antimicrobial agents, and this review provides valuable insights on the strategies to enhance their production yield, which may have significant implications for combating antibiotic resistance. KEY POINTS: • Bacillus-derived AMP is a potential alternative therapy for resistant pathogens • Bacillus produces two main classes of AMPs: ribosomal and non-ribosomal peptides • AMP yield can be enhanced using culture optimization and molecular approaches.

Biodegradation of monocrotophos by Brucella intermedia Msd2 isolated from cotton plant.

Widespread and inadequate use of Monocrotophos has led to several environmental issues. Biodegradation is an ecofriendly method used for detoxification of toxic monocrotophos. In the present study, Msd2 bacterial strain was isolated from the cotton plant growing in contaminated sites of Sahiwal, Pakistan. Msd2 is capable of utilizing the monocrotophos (MCP) organophosphate pesticide as its sole carbon source for growth. Msd2 was identified as Brucella intermedia on the basis of morphology, biochemical characterization and 16S rRNA sequencing. B. intermedia showed tolerance of MCP up to 100 ppm. The presence of opd candidate gene for pesticide degradation, gives credence to B. intermedia as an effective bacterium to degrade MCP. Screening of the B. intermedia strain Msd2 for plant growth promoting activities revealed its ability to produce ammonia, exopolysaccharides, catalase, amylase and ACC-deaminase, and phosphorus, zinc and potassium solubilization. The optimization of the growth parameters (temperatures, shaking rpm, and pH level) of the MCP-degrading isolate was carried out in minimal salt broth supplemented with MCP. The optimal pH, temperature, and rpm for Msd2 growth were observed as pH 6, 35 °C, and 120 rpm, respectively. Based on optimization results, batch degradation experiment was performed. Biodegradation of MCP by B. intermedia was monitored using HPLC and recorded 78% degradation of MCP at 100 ppm concentration within 7 days of incubation. Degradation of MCP by Msd2 followed the first order reaction kinetics. Plant growth promoting and multi-stress tolerance ability of Msd2 was confirmed by molecular analysis. It is concluded that Brucella intermedia strain Msd2 could be beneficial as potential biological agent for an effective bioremediation for polluted environments.

Feather-Degrading Bacillus cereus HD1: Genomic Analysis and Its Optimization for Keratinase Production and Feather Degradation.

Keratinase is an important enzyme that is used to degrade feather wastes produced by poultry industries and slaughterhouses that accumulate rapidly over time. The search for keratinase-producing microorganisms is important to potentially substitute physicochemical treatments of feather waste. In this study, the genome of Bacillus cereus HD1 and its keratinolytic prowess was investigated. The whole-genome shotgun size is 5,668,864 bp consisting of 6083 genes, 69 tRNAs, and 10 rRNAs. The genomic analyses revealed 15 potential keratinase genes and other enzymes that might assist keratin degradation, such as disulfide reductase and cysteine dioxygenase. The optimal conditions for feather degradation and keratinase production by B. cereus HD1 such as incubation time, pH, temperature, yeast extract, and glycerol concentrations were determined to be 5 days, pH 8, 37 °C, 0.05% (w/v), and 0.1% (v/v), respectively. Under optimized conditions, B. cereus HD1 exhibited feather degradation of 65%, with bacterial growth and maximum keratinase activity of 1.3 × 1011 CFU/mL and 41 U/mL, respectively, after 5 days of incubation in a feather basal medium. The findings obtained from this study may facilitate further research into utilizing B. cereus HD1 as a prominent keratinolytic enzymes production host and warrant potential biotechnological applications.

A Review on a Hidden Gem: Phycoerythrin from Blue-Green Algae.

Phycoerythrin (PE) is a pink/red-colored pigment found in rhodophytes, cryptophytes, and blue-green algae (cyanobacteria). The interest in PE is emerging from its role in delivering health benefits. Unfortunately, the current cyanobacterial-PE (C-PE) knowledge is still in the infant stage. It is essential to acquire a more comprehensive understanding of C-PE. This study aimed to review the C-PE structure, up and downstream processes of C-PE, application of C-PE, and strategies to enhance its stability and market value. In addition, this study also presented a strengths, weaknesses, opportunities, and threats (SWOT) analysis on C-PE. Cyanobacteria appeared to be the more promising PE producers compared to rhodophytes, cryptophytes, and macroalgae. Green/blue light is preferred to accumulate higher PE content in cyanobacteria. Currently, the prominent C-PE extraction method is repeated freezing-thawing. A combination of precipitation and chromatography approaches is proposed to obtain greater purity of C-PE. C-PE has been widely exploited in various fields, such as nutraceuticals, pharmaceuticals, therapeutics, cosmetics, biotechnology, food, and feed, owing to its bioactivities and fluorescent properties. This review provides insight into the state-of-art nature of C-PE and advances a step further in commercializing this prospective pigment.

In Silico Study and Effects of BDMC33 on TNBS-Induced BMP Gene Expressions in Zebrafish Gut Inflammation-Associated Arthritis.

The bone morphogenic protein (BMP) family is a member of the TGF-beta superfamily and plays a crucial role during the onset of gut inflammation and arthritis diseases. Recent studies have reported a connection with the gut-joint axis; however, the genetic players are still less explored. Meanwhile, BDMC33 is a newly synthesized anti-inflammatory drug candidate. Therefore, in our present study, we analysed the genome-wide features of the BMP family as well as the role of BMP members in gut-associated arthritis in an inflammatory state and the ability of BDMC33 to attenuate this inflammation. Firstly, genome-wide analyses were performed on the BMP family in the zebrafish genome, employing several in silico techniques. Afterwards, the effects of curcumin analogues on BMP gene expression in zebrafish larvae induced with TNBS (0.78 mg/mL) were determined using real time-qPCR. A total of 38 identified BMP proteins were revealed to be clustered in five major clades and contain TGF beta and TGF beta pro peptide domains. Furthermore, BDMC33 suppressed the expression of four selected BMP genes in the TNBS-induced larvae, where the highest gene suppression was in the BMP2a gene (an eight-fold decrement), followed by BMP7b (four-fold decrement), BMP4 (four-fold decrement), and BMP6 (three-fold decrement). Therefore, this study reveals the role of BMPs in gut-associated arthritis and proves the ability of BDMC33 to act as a potential anti-inflammatory drug for suppressing TNBS-induced BMP genes in zebrafish larvae.

Molecular strategies to increase keratinase production in heterologous expression systems for industrial applications.

Keratinase is an important enzyme that can degrade recalcitrant keratinous wastes to form beneficial recyclable keratin hydrolysates. Keratinase is not only important as an alternative to reduce environmental pollution caused by chemical treatments of keratinous wastes, but it also has industrial significance. Currently, the bioproduction of keratinase from native keratinolytic host is considered low, and this hampers large-scale usage of the enzyme. Straightforward approaches of cloning and expression of recombinant keratinases from native keratinolytic host are employed to elevate the amount of keratinase produced. However, this is still insufficient to compensate for the lack of its large-scale production to meet the industrial demands. Hence, this review aimed to highlight the various sources of keratinase and the strategies to increase its production in native keratinolytic hosts. Molecular strategies to increase the production of recombinant keratinase such as plasmid selection, promoter engineering, chromosomal integration, signal peptide and propeptide engineering, codon optimization, and glycoengineering were also described. These mentioned strategies have been utilized in heterologous expression hosts, namely, Escherichia coli, Bacillus sp., and Pichia pastoris, as they are most widely used for the heterologous propagations of keratinases to further intensify the production of recombinant keratinases adapted to better suit the large-scale demand for them. KEY POINTS: • Molecular strategies to enhance keratinase production in heterologous hosts. • Construction of a prominent keratinolytic host from a native strain. • Patent analysis of keratinase production shows rapid high interest in molecular field.

Neuroprotective and antioxidant effect of Curcuma longa (Rhizome) methanolic extract on SH-SY5Y cells and Javanese medaka.

Diseases caused by oxidative stress can be prevented by antioxidant. Current treatments for those neurodegenerative diseases are not effective and cause many side effects. Thus, the search for alternative medicines is in high demand. Therefore, the main purposed of this study is to evaluate the neuroprotective effects of Curcuma longa (rhizome) 80% methanol extract. Antioxidant using dichlorofuoresence diacetate (DCF-DA) assay on SH-SY5Y cells revealed high activities of Curcuma longa (rhizome) extract with IC50 of 105.9±0.8 µg/mL. Sub-acute and chronic toxicity tests of the plant extract on adult Javanese medaka (Oryzias javanicus) showed high toxicity effect with LC50 of 24.15±0.8 mg/L and 13.69±0.7 mg/L respectively. Neuroprotective tests using cholinesterase assay disclose significant differences at P<0.05 between the group that are exposed to arsenic and treated with the crude extract and the group that are exposed to only arsenic. Identification of vitexin and isovitexin justified the high antioxidant potential of this plant leaf and it highest benefit to be used as medicinal supplement.

Statistical optimisation of growth conditions and diesel degradation by the Antarctic bacterium, Rhodococcus sp. strain AQ5‒07.

Petroleum pollution is a major concern in Antarctica due to the persistent nature of its hydrocarbon components coupled with the region's extreme environmental conditions, which means that bioremediation approaches are largely inapplicable at present. The current study assessed the ability of the psychrotolerant phenol-degrader, Rhodococcus sp. strain AQ5-07, to assimilate diesel fuel as the sole carbon source. Factors expected to influence the efficiency of diesel degradation, including the initial hydrocarbon concentration, nitrogen source concentration and type, temperature, pH and salinity were studied. Strain AQ5-07 displayed optimal cell growth and biodegradation activity at 1% v/v initial diesel concentration, 1 g/L NH4Cl concentration, pH 7 and 1% NaCl during one-factor-at-a-time (OFAT) analyses. Strain AQ5-07 was psychrotolerant based on its optimum growth temperature being near 20 °C. In conventionally optimised media, strain AQ5-07 showed total petroleum hydrocarbons (TPH) mineralisation of 75.83%. However, the optimised condition for TPH mineralisation predicted through statistical response surface methodology (RSM) enhanced the reduction to 90.39% within a 2 days incubation. Our preliminary data support strain AQ5-07 being a potential candidate for real-field soil bioremediation by specifically adopting sludge-phase bioreactor system in chronically cold environments such as Antarctica. The study also confirmed the utility of RSM in medium optimisation.

Production of Lipopeptide Biosurfactant by a Hydrocarbon-Degrading Antarctic Rhodococcus.

Rhodococci are renowned for their great metabolic repertoire partly because of their numerous putative pathways for large number of specialized metabolites such as biosurfactant. Screening and genome-based assessment for the capacity to produce surface-active molecules was conducted on Rhodococcus sp. ADL36, a diesel-degrading Antarctic bacterium. The strain showed a positive bacterial adhesion to hydrocarbon (BATH) assay, drop collapse test, oil displacement activity, microplate assay, maximal emulsification index at 45% and ability to reduce water surface tension to < 30 mN/m. The evaluation of the cell-free supernatant demonstrated its high stability across the temperature, pH and salinity gradient although no correlation was found between the surface and emulsification activity. Based on the positive relationship between the assessment of macromolecules content and infrared analysis, the extracted biosurfactant synthesized was classified as a lipopeptide. Prediction of the secondary metabolites in the non-ribosomal peptide synthetase (NRPS) clusters suggested the likelihood of the surface-active lipopeptide production in the strain's genomic data. This is the third report of surface-active lipopeptide producers from this phylotype and the first from the polar region. The lipopeptide synthesized by ADL36 has the prospect to be an Antarctic remediation tool while furnishing a distinctive natural product for biotechnological application and research.

Statistical Optimisation of Phenol Degradation and Pathway Identification through Whole Genome Sequencing of the Cold-Adapted Antarctic Bacterium, Rhodococcus sp. Strain AQ5-07.

Study of the potential of Antarctic microorganisms for use in bioremediation is of increasing interest due to their adaptations to harsh environmental conditions and their metabolic potential in removing a wide variety of organic pollutants at low temperature. In this study, the psychrotolerant bacterium Rhodococcus sp. strain AQ5-07, originally isolated from soil from King George Island (South Shetland Islands, maritime Antarctic), was found to be capable of utilizing phenol as sole carbon and energy source. The bacterium achieved 92.91% degradation of 0.5 g/L phenol under conditions predicted by response surface methodology (RSM) within 84 h at 14.8 °C, pH 7.05, and 0.41 g/L ammonium sulphate. The assembled draft genome sequence (6.75 Mbp) of strain AQ5-07 was obtained through whole genome sequencing (WGS) using the Illumina Hiseq platform. The genome analysis identified a complete gene cluster containing catA, catB, catC, catR, pheR, pheA2, and pheA1. The genome harbours the complete enzyme systems required for phenol and catechol degradation while suggesting phenol degradation occurs via the ß-ketoadipate pathway. Enzymatic assay using cell-free crude extract revealed catechol 1,2-dioxygenase activity while no catechol 2,3-dioxygenase activity was detected, supporting this suggestion. The genomic sequence data provide information on gene candidates responsible for phenol and catechol degradation by indigenous Antarctic bacteria and contribute to knowledge of microbial aromatic metabolism and genetic biodiversity in Antarctica.

Optimization of the Freezing-Thawing Method for Extracting Phycobiliproteins from Arthrospira sp.

The freezing-thawing method had been reported to be the best phycobiliprotein extraction technique. However, optimum parameters of this extraction method for Arthrospira sp. (one of the major phycobiliprotein sources) still remained unclear. Hence, this study aimed to optimize the freezing-thawing parameters of phycobiliprotein extraction in Arthrospira sp. (UPMC-A0087). The optimization of the freezing-thawing method was conducted using different solvents, biomass/solvent ratios, temperatures, time intervals and freezing-thawing cycles. The extracted phycobiliproteins were quantified using a spectrophotometric assay. Double distilled water (pH 7) with a 0.50% w/v biomass/solvent ratio was the most efficient solvent in extracting high concentrations and purity of phycobiliproteins from Arthrospira sp. In addition, the combination of freezing at -80 °C (2 h) and thawing at 25 °C (24 h) appeared to be the optimum temperature and extraction time to obtain the highest amount of phycobiliproteins. A minimum of one cycle of freezing and thawing was sufficient for extracting high concentrations of phycobiliproteins. The findings from this study could reduce the cost and labor needed for extracting high quality phycobiliproteins. It also allowed the harvesting of large amounts of valuable phycobiliproteins.

Biosurfactant Production and Growth Kinetics Studies of the Waste Canola Oil-Degrading Bacterium Rhodococcus erythropolis AQ5-07 from Antarctica.

With the progressive increase in human activities in the Antarctic region, the possibility of domestic oil spillage also increases. Developing means for the removal of oils, such as canola oil, from the environment and waste "grey" water using biological approaches is therefore desirable, since the thermal process of oil degradation is expensive and ineffective. Thus, in this study an indigenous cold-adapted Antarctic soil bacterium, Rhodococcus erythropolis strain AQ5-07, was screened for biosurfactant production ability using the multiple approaches of blood haemolysis, surface tension, emulsification index, oil spreading, drop collapse and "MATH" assay for cellular hydrophobicity. The growth kinetics of the bacterium containing different canola oil concentration was studied. The strain showed ß-haemolysis on blood agar with a high emulsification index and low surface tension value of 91.5% and 25.14 mN/m, respectively. Of the models tested, the Haldane model provided the best description of the growth kinetics, although several models were similar in performance. Parameters obtained from the modelling were the maximum specific growth rate (qmax), concentration of substrate at the half maximum specific growth rate, Ks% (v/v) and the inhibition constant Ki% (v/v), with values of 0.142 h-1, 7.743% (v/v) and 0.399% (v/v), respectively. These biological coefficients are useful in predicting growth conditions for batch studies, and also relevant to "in field" bioremediation strategies where the concentration of oil might need to be diluted to non-toxic levels prior to remediation. Biosurfactants can also have application in enhanced oil recovery (EOR) under different environmental conditions.

Extraction, characterization and molecular structure of bovine skin gelatin extracted with plant enzymes bromelain and zingibain.

Bovine skin was incubated with plant enzymes bromelain (B) and zingibain (Z) at the level of 0, 5, 10, 15, 20 and 25 unit/g of skin and gelatin was extracted at 60 °C for 6 h. Control gelatin was extracted without enzymatic pretreatment. The yield and gel strength were 17.90% and 283.35 g for the control samples and 22.26% and 160.88 g for B20 samples. The zingibain extracted gelatin (GEZ) samples failed to form gel. Viscosities of GEZ gelatins were significantly (P < 0.05) lower than the gelatins extracted using bromelain (GEB). ß and α chains were absolutely degraded in all GEB and GEZ samples. Only smear bands were observed in GEZ gelatins whereas GEB samples revealed presence of low molecular weight polypeptides. Loss of molecular order was noticed in Z5 as elaborated by Fourier transform infrared (FTIR) spectroscopy. Larger particle size, denser and inter-connected irregular network was observed in B20 under scanning electron microscopy. Based on the results obtained, bromelain, particularly at level 20, could be used to obtain a better quality gelatin with higher yield compared to zingibain.

Evaluation of conventional and response surface level optimisation of n-dodecane (n-C12) mineralisation by psychrotolerant strains isolated from pristine soil at Southern Victoria Island, Antarctica.

BACKGROUND: Biodegradation of hydrocarbons in Antarctic soil has been reported to be achieved through the utilisation of indigenous cold-adapted microorganisms. Although numerous bacteria isolated from hydrocarbon-contaminated sites in Antarctica were able to demonstrate promising outcomes in utilising hydrocarbon components as their energy source, reports on the utilisation of hydrocarbons by strains isolated from pristine Antarctic soil are scarce. In the present work, two psychrotolerant strains isolated from Antarctic pristine soil with the competency to utilise diesel fuel as the sole carbon source were identified and optimised through conventional and response surface method. RESULTS: Two potent hydrocarbon-degraders (ADL15 and ADL36) were identified via partial 16S rRNA gene sequence analysis, and revealed to be closely related to the genus Pseudomonas and Rhodococcus sp., respectively. Factors affecting diesel degradation such as temperature, hydrocarbon concentration, pH and salt tolerance were studied. Although strain ADL36 was able to withstand a higher concentration of diesel than strain ADL15, both strains showed similar optimal condition for the cell's growth at pH 7.0 and 1.0% (w/v) NaCl at the conventional 'one-factor-at-a-time' level. Both strains were observed to be psychrotrophs with optimal temperatures of 20 °C. Qualitative and quantitative analysis were performed with a gas chromatograph equipped with a flame ionisation detector to measure the reduction of n-alkane components in diesel. In the pre-screening medium, strain ADL36 showed 83.75% of n-dodecane mineralisation while the reduction of n-dodecane by strain ADL15 was merely at 22.39%. The optimised condition for n-dodecane mineralisation predicted through response surface methodology enhanced the reduction of n-dodecane to 99.89 and 38.32% for strain ADL36 and strain ADL15, respectively. CONCLUSIONS: Strain ADL36 proves to be a better candidate for bioaugmentation operations on sites contaminated with aliphatic hydrocarbons especially in the Antarctic and other cold regions. The results obtained throughout strongly supports the use of RSM for medium optimisation.

Keratinase production and biodegradation of polluted secondary chicken feather wastes by a newly isolated multi heavy metal tolerant bacterium-Alcaligenes sp. AQ05-001.

Biodegradation of agricultural wastes, generated annually from poultry farms and slaughterhouses, can solve the pollution problem and at the same time yield valuable degradation products. But these wastes also constitute environmental nuisance, especially in Malaysia where their illegal disposal on heavy metal contaminated soils poses a serious biodegradation issue as feather tends to accumulate heavy metals from the surrounding environment. Further, continuous use of feather wastes as cheap biosorbent material for the removal of heavy metals from effluents has contributed to the rising amount of polluted feathers, which has necessitated the search for heavy metal-tolerant feather degrading strains. Isolation, characterization and application of a novel heavy metal-tolerant feather-degrading bacterium, identified by 16S RNA sequencing as Alcaligenes sp. AQ05-001 in degradation of heavy metal polluted recalcitrant agricultural wastes, have been reported. Physico-cultural conditions influencing its activities were studied using one-factor-at-a-time and a statistical optimisation approach. Complete degradation of 5 g/L feather was achieved with pH 8, 2% inoculum at 27 °C and incubation period of 36 h. The medium optimisation after the response surface methodology (RSM) resulted in a 10-fold increase in keratinase production (88.4 U/mL) over the initial 8.85 U/mL when supplemented with 0.5% (w/v) sucrose, 0.15% (w/v) ammonium bicarbonate, 0.3% (w/v) skim milk, and 0.01% (w/v) urea. Under optimum conditions, the bacterium was able to degrade heavy metal polluted feathers completely and produced valuable keratinase and protein-rich hydrolysates. About 83% of the feathers polluted with a mixture of highly toxic metals were degraded with high keratinase activities. The heavy metal tolerance ability of this bacterium can be harnessed not only in keratinase production but also in the bioremediation of heavy metal-polluted feather wastes.

Evaluation of acetylcholinesterase source from fish, Tor tambroides for detection of carbamate.

Acetylcholinesterase (AChE) from the brain tissue of local freshwater fish, Tor tambroides was isolated through affinity purification. Acetylthiocholine iodide (ATCi) was preferable synthetic substrate to purified AChE with highest maximal velocity (V(max)) and lowest biomolecular constant (K(m)) at 113.60 Umg(-1) and 0.0689 mM, respectively, with highest catalytic efficiency ratio (V(max)/K(m)) of 1648.77. The optimum pH was 7.5 with sodium phosphate buffer as medium, while optimal temperature was in the range of 25 to 35 degrees C. Bendiocarp, carbofuran, carbaryl, methomyl and propoxur significantly lowered the AChE activity greater than 50%, and the IC50 value was estimated at inhibitor concentration of 0.0758, 0.0643, 0.0555, 0.0817 and 0.0538 ppm, respectively.

Isolation and characterization of luminescent bacterium for sludge biodegradation.

Microtox is based on the inhibition of luminescence of the bacterium Vibrio fischeri by the toxicants. This technique has been accepted by the USEPA (United States Environmental Protection Agency) as a biomonitoring tool for remediation of toxicants such as hydrocarbon sludge. In the present study, a luminescent bacterium was isolated from yellow striped scad (Selaroides leptolepis) and was tentatively identified as Vibrio sp. isolate MZ. This aerobic isolate showed high luminescence activity in a broad range of temperature from 25 to 35 °C. In addition, optimal conditions for high bioluminescence activity in range of pH 7.5 to 8.5 and 10 gl(-1) of sodium chloride, 10 gl(-1) of peptone and 10 gl(-1) of sucrose as carbon source. Bench scale biodegradation 1% sludge (w/v) was set up and degradation was determined using gas chromatography with flame ionised detector (GC-FID). In this study, Rhodococcus sp. strain AQ5NOL2 was used to degrade the sludge. Based on the preliminary results obtained, Vibrio sp. isolate MZwas able to monitor the biodegradation of sludge. Therefore, Vibrio sp. isolate MZ has the potential to be used as a biomonitoring agent for biomonitoring of sludge biodegradation particularly in the tropical ranged environment.

Application of response surface methodology for optimising caffeine-degrading parameters by Leifsonia sp. strain SIU.

Caffeine is an important naturally occurring compound which can be degraded by bacteria. Previously, Leifsonia sp. strain SIU capable of degrading caffeine was isolated from agricultural soil. Plackett-Burman design was used to screen significant parameters that affect the rate of caffeine degradation. After the design was applied, response surface methodology (RSM) through Central Composite Design (CCD) was used to study significant parameters further, in order to get the most superior degradation conditions. The optimum concentrations of carbon source (sucrose), nitrogen source (NH4Cl), pH and initial caffeine concentration was found to be 5.0 gl(-1), 0.4 gl(-1), 6.0 and 375 ppm respectively. Second order polynomial regression model accurately showed interpretation of experimental data with an R2 value of 0.9989, Adjusted (Adj) R2, Predicted (Pred) R2 and F values of 0.9939, 0.9225 and 88.77 respectively.

The assessment of cholinesterase from the liver of Puntius javanicus as detection of metal ions.

Crude extract of ChE from the liver of Puntius javanicus was purified using procainamide-sepharyl 6B. S-Butyrylthiocholine iodide (BTC) was selected as the specific synthetic substrate for this assay with the highest maximal velocity and lowest biomolecular constant at 53.49 µmole/min/mg and 0.23 mM, respectively, with catalytic efficiency ratio of 0.23. The optimum parameter was obtained at pH 7.5 and optimal temperature in the range of 25 to 30°C. The effect of different storage condition was assessed where ChE activity was significantly decreased after 9 days of storage at room temperature. However, ChE activity showed no significant difference when stored at 4.0, 0, and -25°C for 15 days. Screening of heavy metals shows that chromium, copper, and mercury strongly inhibited P. javanicus ChE by lowering the activity below 50%, while several pairwise combination of metal ions exhibited synergistic inhibiting effects on the enzyme which is greater than single exposure especially chromium, copper, and mercury. The results showed that P. javanicus ChE has the potential to be used as a biosensor for the detection of metal ions.

Effects of heavy metals on bacterial growth parameters in degradation of phenol by an Antarctic bacterial consortium.

Antarctica has often been perceived as a pristine continent until the recent few decades as pollutants have been observed accruing in the Antarctic environment. Irresponsible human activities such as accidental oil spills, waste incineration and sewage disposal are among the primary anthropogenic sources of heavy metal contaminants in Antarctica. Natural sources including animal excrement, volcanism and geological weathering also contribute to the increase of heavy metals in the ecosystem. A microbial growth model is presented for the growth of a bacterial cell consortium used in the biodegradation of phenol in media containing different metal ions, namely arsenic (As), cadmium (Cd), aluminium (Al), nickel (Ni), silver (Ag), lead (Pb) and cobalt (Co). Bacterial growth was inhibited by these ions in the rank order of Al < As < Co < Pb < Ni < Cd < Ag. Greatest bacterial growth occurred in 1 ppm Al achieving an OD600 of 0.985 and lowest in 1 ppm Ag with an OD600 of 0.090. At a concentration of 1.0 ppm, Ag had a considerable effect on the bacterial consortium, inhibiting the degradation of phenol, whereas this concentration of the other metal ions tested had no effect on degradation. The biokinetic growth model developed supports the suitability of the bacterial consortium for use in phenol degradation.