Fundamental Limits of the Spatial Control of Heterogeneous Nucleation on Biphilic Surfaces.

Condensation of water vapor on nonwetting surfaces, termed dropwise condensation, leads to rapid droplet removal and significantly improves heat transfer compared to wetting surfaces. However, the spatial distribution of heterogeneous nucleation sites during dropwise condensation is random. Furthermore, the low surface energy of the nonwetting substrate reduces the nucleation rate as predicted by classical nucleation theory. To achieve higher nucleation rates, biphilic surfaces having low nucleation energy barriers that rely on spatial heterogeneity of surface chemistry have been developed. Here, we use a robust method to create biphilic surfaces on flat and micropillar samples having various dimensions (pillar lengths: 10-15 µm, pillar heights: 0-15 µm) by utilizing lift-off microfabrication. Our fabrication approach leads to hydrophilic pillar tops and hydrophobic pillar sides and surrounding basal areas. To study water vapor condensation on the biphilic surfaces, we utilized optical microscopy in a controlled temperature and humidity environment. Interestingly, our studies show that while the majority of nucleation (≈100%) occurred only on the hydrophilic areas (pillar tops) for small pillar center-to-center spacing (pitch), the spatial control of heterogeneous nucleation broke down when the pitch increased. For larger pitches, we observed the nucleation of water droplets on the hydrophobic base in conjunction with hydrophilic pillar tops. Using theoretical models of vapor diffusion coupled with heat transfer and three-dimensional (3D) numerical simulations, we show that nucleation initiation on hydrophilic pillar tops leads to the formation of dry zones, preventing nucleation on hydrophobic regions. However, with increasing pitch, part of the hydrophobic region no longer feels the presence of the vapor depletion zone, resulting in subsequent nucleation at defect sites on the hydrophobic regions at the base. Our study offers insights into the fundamental limitations of biphilic condensation and offers avenues for their further improvement for applications such as boiling, icing, evaporation, and condensation.

Characterization of chemoresistant human non-small cell lung cancer cells by metabolic and lipidomic profiling.

INTRODUCTION: Lung cancer is one of the most malignant cancers and the leading cause of cancer-related deaths worldwide, while acquired chemoresistance would represent a major problem in the treatment of non-small cell lung cancer (NSCLC) because of the reduced treatment effect and increased rates of recurrence. METHODS: To establish the chemoresistant NSCLC cells, doxorubicin was treated to A549 cells over 3 months at gradually increasing concentrations from 0.03 to 0.5 µM. Real-time PCR and Western blotting were employed for investigating mRNA and protein expression of the glutathione peroxidase (GPX) protein family and multidrug resistance protein 1 (MRP1) in A549 and A549/CR cells. We also employed gas chromatography mass-spectrometry and nano electrospray ionization mass-spectrometry coupled with multivariate statistical analysis to characterize the unique metabolic and lipidomic profiles of chemoresistant NSCLC cells in order to identify potential therapeutic targets. RESULTS: Reactive oxygen species levels were decreased, and mRNA and protein levels of GPX2 and multidrug resistance protein 1 (MRP1) were increased in A549/CR. We identified 87 metabolites and intact lipid species in A549 and A549/CR. Among these metabolites, lactic acid, glutamic acid, glycine, proline, aspartic acid, succinic acid, and ceramide, alongside the PC to PE ratio, and arachidonic acid-containing phospholipids were suggested as characteristic features of chemoresistant NSCLC cells (A549/CR). CONCLUSIONS: This study reveals characteristic feature differences between drug-resistance NSCLC cells and their parental cells. We suggest potential therapeutic targets in chemoresistant NSCLC. Our results provide new insight into metabolic and lipidomic alterations in chemoresistant NSCLC. This could be used as fundamental information to develop therapeutic strategies for the treatment of chemoresistant NSCLC patients.

End Group Functionality of 95-99%: Epoxide Functionalization of Polystyryl-Lithium Evaluated via Solvent Gradient Interaction Chromatography.

End group functionality is a key parameter of functional polymer chains. The end-capping efficiency of living polystyryl lithium with various epoxides, namely ethylene oxide (EO), ethoxy ethyl glycidyl ether (EEGE) and isopropylidene glyceryl glycidyl ether (IGG), is investigated with solvent gradient interaction chromatography (SGIC). Generally, end-capping efficiencies >95% are observed. Hydroxy functional polystyrene (PS-OH, PS-EEGE-OH, and PS-IGG-OH) with molar masses ranging from 13.8 to 15.0 kg mol-1 are obtained, with dispersities of 1.05-1.06. Deprotection of the acetal (PS-EEGE-OH) and ketal protective group (PS-IGG-OH) is investigated. Nearly quantitative deprotection (>99%) resulting in the corresponding multihydroxy functional PS (PS-(OH)2 and PS-(OH)3 ) are observed via SGIC. Esterification of PS-OH with succinic anhydride shows a conversion of 98% to the corresponding ester. A detailed picture of side reactions during the carbanionic polymer synthesis subsequent epoxide termination is obtained, demonstrating 95-99% terminal functionality. Depending on the polarity of the end group, an elution order of PS-OH < PS-(OH)2  < PS-(OH)3  < PS-COOH is obtained in SGIC. The study demonstrates both the analytical power of SGIC and the exceptionally high terminal functionalization efficiency of anionic polymerization methods.

Nonlinear rheometry of entangled polymeric rings and ring-linear blends.

We present a comprehensive experimental rheological dataset for purified entangled ring polystyrenes and their blends with linear chains in nonlinear shear and elongation. In particular, data for shear stress growth coefficient, steady-state shear viscosity, and first and second normal stress differences are obtained and discussed as functions of shear rate as well as molecular parameters (molar mass, blend composition and decreasing molar mass of linear component in blend). Over the extended parameter range investigated, rings do not exhibit clear transient undershoot in shear, in contrast to their linear counterparts and ring-linear blends. For the latter, the size of the undershoot and respective strain appear to increase with shear rate. Universal scaling of strain at overshoot and fractional overshoot (ratio of maximum to steady-state shear stress growth coefficient) indicates subtle differences in the shear-rate dependence between rings and linear polymers or their blends. The shear thinning behaviour of pure rings yields a slope nearly identical to predictions (-4/7) of a recent shear slit model and molecular dynamics simulations. Data for the second normal stress difference are reported for rings and ring-linear blends. While N 2 is negative and its absolute value stays below that of N 1 , as for linear polymers, the ratio -N 2 /N 1 is unambiguously larger for rings compared to linear polymer solutions with the same number of entanglements (almost by factor of two), in agreement with recent non-equilibrium molecular dynamics simulations. Further, -N 2 exhibits slightly weaker shear rate dependence compared to N 1 at high rates, and the respective power-law exponents can be rationalized in view of the slit model (3/7) and simulations (0.6), although further work is needed to unravel the molecular original of the observed behaviour. The comparison of shear and elongational stress growth coefficients for blends reflects the effect of ring-linear threading which leads to significant viscosity enhancement in elongation. Along the same lines, the elongational stress is much larger than the first normal stress in shear, and their ratio is much larger for rings and ring-linear blends compared to linear polymers. This conforms the interlocking scenario of rings and their important role in mechanically reinforcing linear matrices.

Activation of Persulfate by Nanosized Zero-Valent Iron (NZVI): Mechanisms and Transformation Products of NZVI.

The mechanisms involved in the activation of persulfate by nanosized zero-valent iron (NZVI) were elucidated and the NZVI transformation products identified. Two distinct reaction stages, in terms of the kinetics and radical formation mechanism, were found when phenol was oxidized by the persulfate/NZVI system. In the initial stage, lasting 10 min, Fe0(s) was consumed rapidly and sulfate radicals were produced through activation by aqueous Fe2+. The second stage was governed by Fe catalyzed activation in the presence of aqueous Fe3+ and iron (oxyhydr)oxides in the NZVI shells. The second stage was 3 orders of magnitude slower than the initial stage. An electron balance showed that the sulfate radical yield per mole of persulfate was more than two times higher in the persulfate/NZVI system than in the persulfate/Fe2+ system. Radicals were believed to be produced more efficiently in the persulfate/NZVI system because aqueous Fe2+ was supplied slowly, preventing sulfate radicals being scavenged by excess aqueous Fe2+. In the second stage, the multilayered shell conducted electrons, and magnetite in the shell provided electrons for the activation of persulfate. Iron speciation analysis (including X-ray absorption spectroscopy) results indicated that a shrinking core/growing shell model explained NZVI transformation during the persulfate/NZVI process.

Results of Database Studies in Spine Surgery Can Be Influenced by Missing Data.

BACKGROUND: National databases are increasingly being used for research in spine surgery; however, one limitation of such databases that has received sparse mention is the frequency of missing data. Studies using these databases often do not emphasize the percentage of missing data for each variable used and do not specify how patients with missing data are incorporated into analyses. This study uses the American College of Surgeons National Surgical Quality Improvement Program (ACS-NSQIP) database to examine whether different treatments of missing data can influence the results of spine studies. QUESTIONS/PURPOSES: (1) What is the frequency of missing data fields for demographics, medical comorbidities, preoperative laboratory values, operating room times, and length of stay recorded in ACS-NSQIP? (2) Using three common approaches to handling missing data, how frequently do those approaches agree in terms of finding particular variables to be associated with adverse events? (3) Do different approaches to handling missing data influence the outcomes and effect sizes of an analysis testing for an association with these variables with occurrence of adverse events? METHODS: Patients who underwent spine surgery between 2005 and 2013 were identified from the ACS-NSQIP database. A total of 88,471 patients undergoing spine surgery were identified. The most common procedures were anterior cervical discectomy and fusion, lumbar decompression, and lumbar fusion. Demographics, comorbidities, and perioperative laboratory values were tabulated for each patient, and the percent of missing data was noted for each variable. These variables were tested for an association with "any adverse event" using three separate multivariate regressions that used the most common treatments for missing data. In the first regression, patients with any missing data were excluded. In the second regression, missing data were treated as a negative or "reference" value; for continuous variables, the mean of each variable's reference range was computed and imputed. In the third regression, any variables with > 10% rate of missing data were removed from the regression; among variables with ≤ 10% missing data, individual cases with missing values were excluded. The results of these regressions were compared to determine how the different treatments of missing data could affect the results of spine studies using the ACS-NSQIP database. RESULTS: Of the 88,471 patients, as many as 4441 (5%) had missing elements among demographic data, 69,184 (72%) among comorbidities, 70,892 (80%) among preoperative laboratory values, and 56,551 (64%) among operating room times. Considering the three different treatments of missing data, we found different risk factors for adverse events. Of 44 risk factors found to be associated with adverse events in any analysis, only 15 (34%) of these risk factors were common among the three regressions. The second treatment of missing data (assuming "normal" value) found the most risk factors (40) to be associated with any adverse event, whereas the first treatment (deleting patients with missing data) found the fewest associations at 20. Among the risk factors associated with any adverse event, the 10 with the greatest effect size (odds ratio) by each regression were ranked. Of the 15 variables in the top 10 for any regression, six of these were common among all three lists. CONCLUSIONS: Differing treatments of missing data can influence the results of spine studies using the ACS-NSQIP. The current study highlights the importance of considering how such missing data are handled. CLINICAL RELEVANCE: Until there are better guidelines on the best approaches to handle missing data, investigators should report how missing data were handled to increase the quality and transparency of orthopaedic database research. Readers of large database studies should note whether handling of missing data was addressed and consider potential bias with high rates or unspecified or weak methods for handling missing data.

BMP-2-induced Neuroforaminal Bone Growth in the Setting of a Minimally Invasive Transforaminal Lumbar Interbody Fusion.

Minimally invasive transforaminal lumbar interbody fusion (MIS-TLIF) has become a popular alternative to traditional methods of lumbar decompression and fusion. When compared with the open technique, the minimally invasive approach can result in decreased pain and blood loss as well as a shorter length of hospitalization. However, the narrower working channel through the tubular retractor increases the difficulty of decortication and bone grafting. Therefore, recombinant human bone morphogenetic proteins (rhBMP-2) is often utilized (although this is off-label) to create a more favorable interbody fusion environment. Recently, the use of rhBMP-2 has been associated with excessive bone growth in an MIS-TLIF. If this bone growth compresses the neighboring neural structures, patients may present with either new or recurrent radicular pain. Computed tomographic (CT) imaging can demonstrate heterotopic bone growth extending from the disk space into either the ipsilateral neuroforamen or lateral recess, which may result in the compression of the exiting or traversing root, respectively. The purpose of this article and the accompanying video is to demonstrate a technique for defining and resecting rhBMP-2-induced heterotopic bone growth following a previous MIS-TLIF.

Minimally Invasive Transforaminal Lumbar Interbody Fusion.

Minimally invasive transforaminal lumbar interbody fusion (MIS TLIF) is performed via tubular dilators thereby preserving the integrity of the paraspinal musculature. The decreased soft tissue disruption in the MIS technique has been associated with significantly decreased blood loss, shorter length of hospitalization, and an expedited return to work while maintaining comparable arthrodesis rates when compared with the open technique particularly in the setting of spondylolisthesis (isthmic and degenerative), recurrent symptomatic disk herniation, spinal stenosis, pseudoarthrosis, iatrogenic instability, and spinal trauma. The purpose of this article and the accompanying video wass to demonstrate the techniques for a primary, single-level MIS TLIF.

Minimally Invasive Posterior Cervical Foraminotomy.

The minimally invasive posterior cervical foraminotomy procedure has become a common and successful procedure for the treatment of cervical radiculopathy. Specifically, the minimally invasive approach allows for decreased postoperative pain, blood loss, and length of hospitalization by preserving the surrounding soft tissue as compared with the traditional open approach. This article and accompanying video demonstrates the technique for a primary, single-level minimally invasive posterior cervical foraminotomy as performed through a tubular retractor.

Development of an MgO-based binder for stabilizing fine sediments and storing CO2.

An MgO-based binder was developed that could stabilize fine dredged sediments for reuse and store CO2. Initially, a binder consisting of fly ash (FA) and blast furnace slag (BFS) was developed by using alkaline activators such as KOH, NaOH, and lime. The FA0.4-BFS0.6 binder (mixed at a FA-to-BFS weight ratio of 4:6) showed the highest compressive strength of 10.7 MPa among FA/BFS binders when 5 M KOH was used. When lime (L) was tested as an alkaline activator, the strength was comparable with those obtained when KOH or NaOH was used. The L0.1-(FA0.4BFS0.6)0.9 binder (10 % lime mixed with the FA/BFS binder) showed the highest strength of 11.0 MPa. Finally, by amending this L0.1-(FA0.4BFS0.6)0.9 binder with MgO, a novel MgO-based binder (MgO0.5-(L0.1-(FA0.4BFS0.6)0.9) 0.5) was developed, which demonstrated the 28th day strength of 11.9 MPa. The MgO-based binder was successfully applied to stabilize a fine sediment to yield a compressive strength of 4.78 MPa in 365 days, which was higher than that obtained by the Portland cement (PC) system (3.22 MPa). Carbon dioxide sequestration was evidenced by three observations: (1) the decrease in pH of the treated sediment from 12.2 to 11.0; (2) the progress of the carbonation front inward the treated sediment; and (3) the presence of magnesium carbonates. The thermogravimetric analysis (TGA) results showed that 67.2 kg of CO2 per ton of the treated sediment could be stored under the atmospheric condition during 1 year.