Multichannel quartz crystal microbalance array: Fabrication, evaluation, application in biomarker detection.

A multichannel quartz crystal microbalance array (MQCM) with three pairs of gold electrodes was fabricated for detection of two biomarkers: acetone and nitric oxide (NO). The gold electrodes were deposited symmetrically on an AT-cut 10 MHz circular quartz plate using photolithography, sputtering, and lift-off technologies. The effect of gold layer thickness on MQCM performance was investigated and the optimized thickness was 101 nm. The simulation values of the electric parameters C0, Cq, Lq, and Rq in the Butterworth-Van Dike equivalent circuit for the MQCM device were 97 pF, 1.3 pF, 1.05 mH, and 9.8 Ω, respectively. Simulation values were in the theoretical range, which indicated that the fabricated MQCM device had good resonance performance. Two types of nanocomposites, titanium dioxide-multiwalled carbon nanotubes and cobalt (II)phthalocyanine-silica, were synthesized as sensing materials. The sensing mechanism is based on coordination adsorption of target molecules onto the sensing material, resulting in a resonant frequency shift of modified QCM sensor. A linear range from 4.33 to 129.75 ppmv for acetone was obtained and one from 5.75 to 103.45 ppbv for NO.

Terahertz Polarization Isolator Using Two-Dimensional Square Lattice Tellurium Rod Array.

A novel terahertz polarization isolator using a two-dimensional square lattice tellurium rod array is numerically investigated at the interesting band of 0.22 THz in this short paper. The isolator is designed by inserting six hexagonal tellurium rods into a fully polarized photonic crystals waveguide with high efficiency of -0.34 dB. The TE and TM photonic band gaps of the 7 × 16 tellurium photonic crystals are computed based on the plane wave expansion method, which happen to coincide at the normalized frequency domain from 0.3859(a/λ) to 0.4033(a/λ), corresponding to the frequency domain from 0.2152 to 0.2249 THz. The operating bandwidth of the tellurium photonic crystals waveguide covers 0.2146 to 0.2247 THz, calculated by the finite element method. The six hexagonal tellurium rods with smaller circumradii of 0.16a serve to isolate transverse electric waves and turn a blind eye to transverse magnetic waves. The polarization isolation function and external characteristic curves of the envisaged structure are numerically simulated, which achieves the highest isolation of -33.49 dB at the central frequency of 0.2104 THz and the maximum reflection efficiency of 98.95 percent at the frequency of 0.2141 THz. The designed isolator with a unique function and high performance provides a promising approach for implementing fully polarized THz devices for future 6G communication systems.