Anaerobic Biodegradation of Alternative Fuels and Associated Biocorrosion of Carbon Steel in Marine Environments.

Fuels that biodegrade too easily can exacerbate through-wall pitting corrosion of pipelines and tanks and result in unintentional environmental releases. We tested the biological stability of two emerging naval biofuels (camelina-JP5 and Fischer-Tropsch-F76) and their potential to exacerbate carbon steel corrosion in seawater incubations with and without a hydrocarbon-degrading sulfate-reducing bacterium. The inclusion of sediment or the positive control bacterium in the incubations stimulated a similar pattern of sulfate reduction with different inocula. However, the highest rates of sulfate reduction were found in incubations amended with camelina-JP5 [(57.2 ± 2.2)-(80.8 ± 8.1) µM/day] or its blend with petroleum-JP5 (76.7 ± 2.4 µM/day). The detection of a suite of metabolites only in the fuel-amended incubations confirmed that alkylated benzene hydrocarbons were metabolized via known anaerobic mechanisms. Most importantly, general (r(2) = 0.73) and pitting (r(2) = 0.69) corrosion were positively correlated with sulfate loss in the incubations. Thus, the anaerobic biodegradation of labile fuel components coupled with sulfate respiration greatly contributed to the biocorrosion of carbon steel. While all fuels were susceptible to anaerobic metabolism, special attention should be given to camelina-JP5 biofuel due to its relatively rapid biodegradation. We recommend that this biofuel be used with caution and that whenever possible extended storage periods should be avoided.

Impact of organosulfur content on diesel fuel stability and implications for carbon steel corrosion.

Ultralow sulfur diesel (ULSD) fuel has been integrated into the worldwide fuel infrastructure to help meet a variety of environmental regulations. However, desulfurization alters the properties of diesel fuel in ways that could potentially impact its biological stability. Fuel desulfurization might predispose ULSD to biodeterioration relative to sulfur-rich fuels and in marine systems accelerate rates of sulfate reduction, sulfide production, and carbon steel biocorrosion. To test such prospects, an inoculum from a seawater-compensated ballast tank was amended with fuel from the same ship or with refinery fractions of ULSD, low- (LSD), and high sulfur diesel (HSD) and monitored for sulfate depletion. The rates of sulfate removal in incubations amended with the refinery fuels were elevated relative to the fuel-unamended controls but statistically indistinguishable (∼50 µM SO4/day), but they were found to be roughly twice as fast (∼100 µM SO4/day) when the ship's own diesel was used as a source of carbon and energy. Thus, anaerobic hydrocarbon metabolism likely occurred in these incubations regardless of fuel sulfur content. Microbial community structure from each incubation was also largely independent of the fuel amendment type, based on molecular analysis of 16S rRNA sequences. Two other inocula known to catalyze anaerobic hydrocarbon metabolism showed no differences in fuel-associated sulfate reduction or methanogenesis rates between ULSD, LSD, and HSD. These findings suggest that the stability of diesel is independent of the fuel organosulfur compound status and reasons for the accelerated biocorrosion associated with the use of ULSD should be sought elsewhere.

Proteogenomic elucidation of the initial steps in the benzene degradation pathway of a novel halophile, Arhodomonas sp. strain Rozel, isolated from a hypersaline environment.

Lately, there has been a special interest in understanding the role of halophilic and halotolerant organisms for their ability to degrade hydrocarbons. The focus of this study was to investigate the genes and enzymes involved in the initial steps of the benzene degradation pathway in halophiles. The extremely halophilic bacteria Arhodomonas sp. strain Seminole and Arhodomonas sp. strain Rozel, which degrade benzene and toluene as the sole carbon source at high salinity (0.5 to 4 M NaCl), were isolated from enrichments developed from contaminated hypersaline environments. To obtain insights into the physiology of this novel group of organisms, a draft genome sequence of the Seminole strain was obtained. A cluster of 13 genes predicted to be functional in the hydrocarbon degradation pathway was identified from the sequence. Two-dimensional (2D) gel electrophoresis and liquid chromatography-mass spectrometry were used to corroborate the role of the predicted open reading frames (ORFs). ORFs 1080 and 1082 were identified as components of a multicomponent phenol hydroxylase complex, and ORF 1086 was identified as catechol 2,3-dioxygenase (2,3-CAT). Based on this analysis, it was hypothesized that benzene is converted to phenol and then to catechol by phenol hydroxylase components. The resulting catechol undergoes ring cleavage via the meta pathway by 2,3-CAT to form 2-hydroxymuconic semialdehyde, which enters the tricarboxylic acid cycle. To substantiate these findings, the Rozel strain was grown on deuterated benzene, and gas chromatography-mass spectrometry detected deuterated phenol as the initial intermediate of benzene degradation. These studies establish the initial steps of the benzene degradation pathway in halophiles.

Molecular tools to track bacteria responsible for fuel deterioration and microbiologically influenced corrosion.

Investigating the susceptibility of various fuels to anaerobic biodegradation has become complicated with the recognition that the fuels themselves are not sterile. Bacterial DNA could be obtained when various fuels were filtered through a hydrophobic teflon (0.22 µm) membrane filter. Bacterial 16S rRNA genes from these preparations were PCR amplified, cloned, and the resulting libraries sequenced to identify the fuel-borne bacterial communities. The most common sequence, found in algal- and camelina-based biofuels as well as in ultra-low sulfur diesel (ULSD) and F76 diesel, was similar to that of a Tumebacillus. The next most common sequence was similar to Methylobacterium and was found in the biofuels and ULSD. Higher level phylogenetic groups included representatives of the Firmicutes (Bacillus, Lactobacillus and Streptococcus), several Actinobacteria, Deinococcus-Thermus, Chloroflexi, Cyanobacteria, Bacteroidetes, Alphaproteobacteria (Methylobacterium and Sphingomonadales), Betaproteobacteria (Oxalobacteraceae and Burkholderiales) and Deltaproteobacteria. All of the fuel-associated bacterial sequences, except those obtained from a few facultative microorganisms, were from aerobes and only remotely affiliated with sequences that resulted from anaerobic successional events evident when ULSD was incubated with a coastal seawater and sediment inoculum. Thus, both traditional and alternate fuel formulations harbor a characteristic microflora, but these microorganisms contributed little to the successional patterns that ultimately resulted in fuel decomposition, sulfide formation and metal biocorrosion. The findings illustrate the value of molecular approaches to track the fate of bacteria that might come in contact with fuels and potentially contribute to corrosion problems throughout the energy value chain.

A lysine-tyrosine pair carries out acid-base chemistry in the metal ion-dependent pyridine dinucleotide-linked beta-hydroxyacid oxidative decarboxylases.

This work reviews published structural and kinetic data on the pyridine nucleotide-linked beta-hydroxyacid oxidative decarboxylases. The family of metal ion-dependent pyridine nucleotide-linked beta-hydroxyacid oxidative decarboxylases can be divided into two structural families with the malic enzyme, which has an (S)-hydroxyacid substrate, comprising one subfamily and isocitrate dehydrogenase, isopropylmalate dehydrogenase, homoisocitrate dehydrogenase, and tartrate dehydrogenase, which have an (R)-hydroxyacid substrate, comprising the second subclass. Multiple-sequence alignment of the members of the (R)-hydroxyacid family indicates a high degree of sequence identity with most of the active site residues conserved. The three-dimensional structures of the members of the (R)-hydroxyacid family with structures available superimpose on one another, and the active site structures of the enzymes have a similar overall geometry of residues in the substrate and metal ion binding sites. In addition, a number of residues in the malic enzyme active site are also conserved, and the arrangement of these residues has a similar geometry, although the (R)-hydroxyacid and (S)-hydroxyacid family sites are geometrically mirror images of one another. The active sites of the (R)-hydroxyacid family have a higher positive charge density when compared to those of the (S)-hydroxyacid family, largely due to the number of arginine residues in the vicinity of the substrate alpha-carboxylate and one fewer carboxylate ligand to the divalent metal ion. Data available for all of the enzymes in the family have been considered, and a general mechanism that makes use of a lysine (general base)-tyrosine (general acid) pair is proposed. Differences exist in the mechanism for generating the neutral form of lysine so that it can act as a base.

Role of residues in the adenosine binding site of NAD of the Ascaris suum malic enzyme.

Ascaris suum mitochondrial malic enzyme catalyzes the divalent metal ion dependent conversion of l-malate to pyruvate and CO(2), with concomitant reduction of NAD(P) to NAD(P)H. In this study, some of the residues that form the adenosine binding site of NAD were mutated to determine their role in binding of the cofactor and/or catalysis. D361, which is completely conserved among species, is located in the dinucleotide-binding Rossmann fold and makes a salt bridge with R370, which is also highly conserved. D361 was mutated to E, A and N. R370 was mutated to K and A. D361E and A mutant enzymes were inactive, likely a result of the increase in the volume in the case of the D361E mutant enzyme that caused clashes with the surrounding residues, and loss of the ionic interaction between D361 and R370, for D361A. Although the K(m) for the substrates and isotope effect values did not show significant changes for the D361N mutant enzyme, V/E(t) decreased by 1400-fold. Data suggested the nonproductive binding of the cofactor, giving a low fraction of active enzyme. The R370K mutant enzyme did not show any significant changes in the kinetic parameters, while the R370A mutant enzyme gave a slight change in V/E(t), contrary to expectations. Overall, results suggest that the salt bridge between D361 and R370 is important for maintaining the productive conformation of the NAD binding site. Mutation of residues involved leads to nonproductive binding of NAD. The interaction stabilizes one of the Rossmann fold loops that NAD binds. Mutation of H377 to lysine, which is conserved in NADP-specific malic enzymes and proposed to be a cofactor specificity determinant, did not cause a shift in cofactor specificity of the Ascaris malic enzyme from NAD to NADP. However, it is confirmed that this residue is an important second layer residue that affects the packing of the first layer residues that directly interact with the cofactor.

Issues for storing plant-based alternative fuels in marine environments.

Two coastal seawaters (Key West, FL, USA and the Persian Gulf, Bahrain, representing oligotrophic and eutrophic environments, respectively) were used to evaluate potential biodegradation and corrosion problems during exposure to alternative and conventional fuels. Uncoated carbon steel was exposed at the fuel/seawater interface and polarization resistance was monitored. Under typical marine storage conditions, dioxygen in natural seawater exposed to fuel and carbon steel was reduced to <0.1parts-per-million within 2d due to consumption by corrosion reactions and aerobic microbial respiration. Sulfides, produced by anaerobic sulfate-reducing bacteria, and chlorides were co-located in corrosion products. Transient dioxygen influenced both metabolic degradation pathways and resulting metabolites. Catechols, indicative of aerobic biodegradation, persisted after 90d exposures. Detection of catechols suggested that initial exposure to dioxygen resulted in the formation of aerobic metabolites that exacerbated subsequent corrosion processes.

Metagenomic analysis and metabolite profiling of deep-sea sediments from the Gulf of Mexico following the Deepwater Horizon oil spill.

Marine subsurface environments such as deep-sea sediments, house abundant and diverse microbial communities that are believed to influence large-scale geochemical processes. These processes include the biotransformation and mineralization of numerous petroleum constituents. Thus, microbial communities in the Gulf of Mexico are thought to be responsible for the intrinsic bioremediation of crude oil released by the Deepwater Horizon (DWH) oil spill. While hydrocarbon contamination is known to enrich for aerobic, oil-degrading bacteria in deep-seawater habitats, relatively little is known about the response of communities in deep-sea sediments, where low oxygen levels may hinder such a response. Here, we examined the hypothesis that increased hydrocarbon exposure results in an altered sediment microbial community structure that reflects the prospects for oil biodegradation under the prevailing conditions. We explore this hypothesis using metagenomic analysis and metabolite profiling of deep-sea sediment samples following the DWH oil spill. The presence of aerobic microbial communities and associated functional genes was consistent among all samples, whereas, a greater number of Deltaproteobacteria and anaerobic functional genes were found in sediments closest to the DWH blowout site. Metabolite profiling also revealed a greater number of putative metabolites in sediments surrounding the blowout zone relative to a background site located 127 km away. The mass spectral analysis of the putative metabolites revealed that alkylsuccinates remained below detection levels, but a homologous series of benzylsuccinates (with carbon chain lengths from 5 to 10) could be detected. Our findings suggest that increased exposure to hydrocarbons enriches for Deltaproteobacteria, which are known to be capable of anaerobic hydrocarbon metabolism. We also provide evidence for an active microbial community metabolizing aromatic hydrocarbons in deep-sea sediments of the Gulf of Mexico.

Proper positioning of the nicotinamide ring is crucial for the Ascaris suum malic enzyme reaction.

The mitochondrial NAD-malic enzyme catalyzes the oxidative decarboxylation of malate to pyruvate and CO2. The role of the dinucleotide substrate in oxidative decarboxylation is probed in this study using site-directed mutagenesis to change key residues that line the dinucleotide binding site. Mutant enzymes were characterized using initial rate kinetics, and isotope effects were used to obtain information on the contribution of these residues to binding energy and catalysis. Results obtained for the N479 mutant enzymes indicate that the hydrogen bond donated by N479 to the carboxamide side chain of the nicotinamide ring is important for proper orientation in the hydride transfer step. The stepwise oxidative decarboxylation mechanism observed for the wt enzyme changed to a concerted one, which is totally rate limiting, for the N479Q mutant enzyme. In this case, it is likely that the longer glutamine side chain causes reorientation of malate such that it binds in a conformation that is optimal for concerted oxidative decarboxylation. Converting N479 to the shorter serine side chain gives very similar values of KNAD, Kmalate, and isotope effects relative to wt, but V/Et is decreased 2 000-fold. Data suggest an increased freedom of rotation, resulting in nonproductively bound cofactor. Changes were also made to two residues, S433 and N434, which interact with the nicotinamide ribose of NAD. In addition, N434 donates a hydrogen bond to the beta-carboxylate of malate. The KNAD for the S433A mutant enzyme increased by 80-fold, indicating that this residue provides significant binding affinity for the dinucleotide. With N434A, the interaction of the residue with malate is lost, causing the malate to reorient itself, leading to a slower decarboxylation step. The longer glutamine and methionine side chains stick into the active site and cause a change in the position of malate and/or NAD resulting in more than a 104-fold decrease in V/Et for these mutant enzymes. Overall, data indicate that subtle changes in the orientation of the cofactor and substrate dramatically influence the reaction rate.