Integration of Highly Luminescent Lead Halide Perovskite Nanocrystals on Transparent Lead Halide Nanowire Waveguides through Morphological Transformation and Spontaneous Growth in Water.

The integration of highly luminescent CsPbBr3 quantum dots on nanowire waveguides has enormous potential applications in nanophotonics, optical sensing, and quantum communications. On the other hand, CsPb2 Br5 nanowires have also attracted a lot of attention due to their unique water stability and controversial luminescent property. Here, the growth of CsPbBr3 nanocrystals on CsPb2 Br5 nanowires is reported first by simply immersing CsPbBr3 powder into pure water, CsPbBr3- γ Xγ (X = Cl, I) nanocrystals on CsPb2 Br5 -γ Xγ nanowires are then synthesized for tunable light sources. Systematic structure and morphology studies, including in situ monitoring, reveal that CsPbBr3 powder is first converted to CsPb2 Br5 microplatelets in water, followed by morphological transformation from CsPb2 Br5 microplatelets to nanowires, which is a kinetic dissolution-recrystallization process controlled by electrolytic dissociation and supersaturation of CsPb2 Br5 . CsPbBr3 nanocrystals are spontaneously formed on CsPb2 Br5 nanowires when nanowires are collected from the aqueous solution. Raman spectroscopy, combined photoluminescence, and SEM imaging confirm that the bright emission originates from CsPbBr3 -γ Xγ nanocrystals while CsPb2 Br5 -γ Xγ nanowires are transparent waveguides. The intimate integration of nanoscale light sources with a nanowire waveguide is demonstrated through the observation of the wave guiding of light from nanocrystals and Fabry-Perot interference modes of the nanowire cavity.

Highly Efficient Red-Emitting Bis-Cyclometalated Iridium Complexes.

Bis-cyclometalated iridium complexes with enhanced phosphorescence quantum yields in the red region of the visible spectrum are described. Here, we demonstrate that incorporating strongly π-donating, nitrogen-containing ß-ketoiminate (acNac), ß-diketiminate (NacNac), and N, N'-diisopropylbenzamidinate (dipba) ancillary ligands can demonstrably perturb the excited-state kinetics, leading to enhanced photoluminescence quantum yields (ΦPL) for red-emitting compounds. A comprehensive study of the quantum yields and lifetimes for these complexes reveals that for the compounds with the highest quantum yields, the radiative rate constant ( kr) is significantly higher than that of related complexes, and contributes substantially to the increase in ΦPL. Experimental and computational evidence is consistent with the notion that an increase in spin-orbit coupling, caused by an enhancement of the metal-to-ligand charge transfer (MLCT) character of the excited state via destabilization of the HOMO, is mainly responsible for the faster radiative rates. One of the compounds was shown to be effective as the emissive dopant in an organic light-emitting diode device.

Photoacoustic identification of laser-induced microbubbles as light scattering centers for optical limiting in a liquid suspension of graphene nanosheets.

Liquid suspensions of carbon nanotubes, graphene and transition metal dichalcogenides have exhibited excellent performance in optical limiting. However, the underlying mechanism has remained elusive and is generally ascribed to their superior nonlinear optical properties such as nonlinear absorption or nonlinear scattering. Using graphene as an example, we show that photo-thermal microbubbles are responsible for optical limiting as strong light scattering centers: graphene sheets absorb incident light and become heated up above the boiling point of water, resulting in vapor and microbubble generation. This conclusion is based on the direct observation of bubbles above the laser beam as well as a strong correlation between laser-induced ultrasound and optical limiting. In situ Raman scattering of graphene further confirms that the temperature of graphene under laser pulses rises above the boiling point of water but still remains too low to vaporize graphene and create graphene plasma bubbles. Photo-thermal bubble scattering is not a nonlinear optical process and requires very low laser intensity. This understanding helps us to design more efficient optical limiting materials and understand the intrinsic nonlinear optical properties of nanomaterials.

Extrinsic Green Photoluminescence from the Edges of 2D Cesium Lead Halides.

Since the first report of the green emission of 2D all-inorganic CsPb2 Br5 , its bandgap and photoluminescence (PL) origin have generated intense debate and remained controversial. After the discovery that PL centers occupy only specific morphological structures in CsPb2 Br5 , a two-step highly sensitive and noninvasive optical technique is employed to resolve the controversy. Same-spot Raman-PL as a static property-structure probe reveals that CsPbBr3 nanocrystals are contributing to the green emission of CsPb2 Br5 ; pressure-dependent Raman-PL with a diamond anvil cell as a dynamic probe further rules out point defects such as Br vacancies as an alternative mechanism. Optical absorption under hydrostatic pressure shows that the bandgap of CsPb2 Br5 is 0.3-0.4 eV higher than previously reported values and remains nearly constant with pressure up to 2 GPa in good agreement with full-fledged density functional theory (DFT) calculations. Using ion exchange of Br with Cl and I, it is further proved that CsPbBr3- x Xx (X = Cl or I) is responsible for the strong visible PL in CsPb2 Br5- x Xx . This experimental approach is applicable to all PL-active materials to distinguish intrinsic defects from extrinsic nanocrystals, and the findings pave the way for new design and development of highly efficient optoelectronic devices based on all-inorganic lead halides.

Laser streaming: Turning a laser beam into a flow of liquid.

Transforming a laser beam into a mass flow has been a challenge both scientifically and technologically. We report the discovery of a new optofluidic principle and demonstrate the generation of a steady-state water flow by a pulsed laser beam through a glass window. To generate a flow or stream in the same path as the refracted laser beam in pure water from an arbitrary spot on the window, we first fill a glass cuvette with an aqueous solution of Au nanoparticles. A flow will emerge from the focused laser spot on the window after the laser is turned on for a few to tens of minutes; the flow remains after the colloidal solution is completely replaced by pure water. Microscopically, this transformation is made possible by an underlying plasmonic nanoparticle-decorated cavity, which is self-fabricated on the glass by nanoparticle-assisted laser etching and exhibits size and shape uniquely tailored to the incident beam profile. Hydrophone signals indicate that the flow is driven via acoustic streaming by a long-lasting ultrasound wave that is resonantly generated by the laser and the cavity through the photoacoustic effect. The principle of this light-driven flow via ultrasound, that is, photoacoustic streaming by coupling photoacoustics to acoustic streaming, is general and can be applied to any liquid, opening up new research and applications in optofluidics as well as traditional photoacoustics and acoustic streaming.

A TiO2/FeMnP Core/Shell Nanorod Array Photoanode for Efficient Photoelectrochemical Oxygen Evolution.

A variety of catalysts have recently been developed for electrocatalytic oxygen evolution, but very few of them can be readily integrated with semiconducting light absorbers for photoelectrochemical or photocatalytic water splitting. Here, we demonstrate an efficient core/shell photoanode with a highly active oxygen evolution electrocatalyst shell (FeMnP) and semiconductor core (rutile TiO2) for photoelectrochemical oxygen evolution reaction. Metal-organic chemical vapor deposition from a single-source precursor was used to ensure good contact between the FeMnP and the TiO2. The TiO2/FeMnP core/shell photoanode reaches the theoretical photocurrent density for rutile TiO2 of 1.8 mA cm-2 at 1.23 V vs reversible hydrogen electrode under simulated 100 mW cm-2 (1 sun) irradiation. The dramatic enhancement is a result of the synergistic effects of the high oxygen evolution reaction activity of FeMnP (delivering an overpotential of 300 mV with a Tafel slope of 65 mV dec-1 in 1 M KOH) and the conductive interlayer between the surface active sites and semiconductor core which boosts the interfacial charge transfer and photocarrier collection. The facile fabrication of the TiO2/FeMnP core/shell nanorod array photoanode offers a compelling strategy for preparing highly efficient photoelectrochemical solar energy conversion devices.