Creating and Stabilizing an Oxidized Pd Surface under Reductive Conditions for Photocatalytic Hydrogenation of Aromatic Carbonyls.

Photocatalysis provides an eco-friendly route for the hydrogenation of aromatic carbonyls to O-free aromatics, which is an important refining process in the chemical industry that is generally carried out under high pressure of hydrogen at elevated temperatures. However, aromatic carbonyls are often only partially hydrogenated to alcohols, which readily desorbs and are hardly further deoxygenated under ambient conditions. Here, we show that by constructing an oxide surface over the Pd cocatalyst supported on graphitic carbon nitride, an alternative hydrogenation path of aromatic carbonyls becomes available via a step-wise acetalization and hydrogenation, thus allowing efficient and selective production of O-free aromatics. The PdO surface allows for optimum adsorption of reactants and intermediates and rapid abstraction of hydrogen from the alcohol donor, favoring fast acetalization of the carbonyls and their consecutive hydrogenation to O-free hydrocarbons. The photocatalytic hydrogenation of benzaldehyde into toluene shows a high selectivity of >90% and a quantum efficiency of ∼10.2% under 410 nm irradiation. By adding trace amounts of HCl to the reaction solution, the PdO surface remains stable and active for long-term operation at high concentrations, offering perspective for practical applications.

Design of TiO2-Surfactin Hybrid Systems with Multifunctional Properties.

In recent years, multifunctional inorganic-organic hybrid materials have been widely investigated in order to determine their potential synergetic, antagonist, or independent effects in terms of reactivity. The aim of this study was to design and characterize a new hybrid material by coupling well-known photocatalytic TiO2 nanoparticles with sodium surfactin (SS), a biosurfactant showing high binding affinity for metal cations as well as the ability to interact with and disrupt microorganisms' cell membranes. We used both chemical and colloidal synthesis methodologies and investigated how different TiO2:SS weight ratios affected colloidal, physicochemical, and functional properties. We discovered a clear breaking point between TiO2 and SS single-component trends and identified different ranges of applicability by considering different functional properties such as photocatalytic, heavy metal sorption capacity, and antibacterial properties. At low SS contents, the photocatalytic properties of TiO2 are preserved (conversion of organic dye = 99% after 40 min), and the hybrid system can be used in advanced oxidation processes, taking advantage of the additional antimicrobial SS properties. At high SS contents, the TiO2 photoactivity is inhibited, and the hybrid can be usefully exploited as a UV blocker in cosmetics, avoiding undesired oxidative effects (UV adsorption in the range between 300-400 nm). Around the breaking point (TiO2:SS 1:1), the hybrid material preserves the high surface area of TiO2 (specific surface area around 180 m2/g) and demonstrates NOx depletion of up to 100% in 80 min, together with improved adhesion of hybrid antibacterial coating. The last design demonstrated the best results for the concurrent removal of inorganic, organic, and biological pollutants in water/soil remediation applications.

Photocatalytic Oxidation of HMF under Solar Irradiation: Coupling of Microemulsion and Lyophilization to Obtain Innovative TiO2-Based Materials.

The photocatalytic oxidation of biomass-derived building blocks such as 5-hydroxymethylfurfural (HMF) is a promising reaction for obtaining valuable chemicals and the efficient long-term storage of solar radiation. In this work, we developed innovative TiO2-based materials capable of base-free HMF photo-oxidation in water using simulated solar irradiation. The materials were prepared by combining microemulsion and spray-freeze drying (SFD), resulting in highly porous systems with a large surface area. The effect of titania/silica composition and the presence of gold-copper alloy nanoparticles on the properties of materials as well as photocatalytic performance were evaluated. Among the lab-synthesized photocatalysts, Ti15Si85 SFD and Au3Cu1/Ti15Si85 SFD achieved the higher conversions, while the best selectivity was observed for Au3Cu1/Ti15Si85 SFD. The tests with radical scavengers for both TiO2-m and Au3Cu1/Ti15Si85 SFD suggested that primary species responsible for the selective photo-oxidation of HMF are photo-generated electrons and/or superoxide radicals.

Selective Oxidation of HMF via Catalytic and Photocatalytic Processes Using Metal-Supported Catalysts.

In this study, 5-hydroxymethylfurfural (HMF) oxidation was carried out via both the catalytic and the photocatalytic approach. Special attention was devoted to the preparation of the TiO2-based catalysts, since this oxide has been widely used for catalytic and photocatalytic application in alcohol oxidation reactions. Thus, in the catalytic process, the colloidal heterocoagulation of very stable sols, followed by the spray-freeze-drying (SFD) approach, was successfully applied for the preparation of nanostructured porous TiO2-SiO2 mixed-oxides with high surface areas. The versatility of the process made it possible to encapsulate Pt particles and use this material in the liquid-phase oxidation of HMF. The photocatalytic activity of a commercial titania and a homemade oxide prepared with the microemulsion technique was then compared. The influence of gold, base addition, and oxygen content on product distribution in the photocatalytic process was evaluated.

Strategies to improve hydrogen activation on gold catalysts.

Catalytic reactions involving molecular hydrogen are at the heart of many transformations in the chemical industry. Classically, hydrogenations are carried out on Pd, Pt, Ru or Ni catalysts. However, the use of supported Au catalysts has garnered attention in recent years owing to their exceptional selectivity in hydrogenation reactions. This is despite the limited understanding of the physicochemical aspects of hydrogen activation and reaction on Au surfaces. A rational design of new improved catalysts relies on making better use of the hydrogenating properties of Au. This Review analyses the strategies utilized to improve hydrogen-Au interactions, from addressing the importance of the Au particle size to exploring alternative mechanisms for H2 dissociation on Au cations and Au-ligand interfaces. These insights hold the potential to drive future applications of Au catalysis.

Aquivion-Based Spray Freeze-Dried Composite Materials for the Cascade Production of γ-Valerolactone.

The development of multifunctional catalysts is a necessary step to effectively carry out one-pot cascade reactions, such as that from furfural to γ-valerolactone. This research effort faces the challenge posed by the intrinsic limit of how many kinds of catalytic sites a single material can bear. In this work, the application of Spray-Freeze Drying (SFD) as a synthetic technique for the preparation of a wide range of innovative composite multi-functional catalysts is reported. Herein we show that by the proper combination of Aquivion as a highly active Brønsted acid catalyst and metal oxides as both support materials and Lewis acids (LAS) enable to achieve highly unique efficient and effective dual acid composite catalysts that are able to carry out the cascade reaction from furfural to γ-valerolactone. The dual catalytic system comprised of Aq/ZrO2 with 30 % polymer content prepared via spray-freeze drying exhibited GVL yields of 25 % after only 2 h at 180 °C and a remarkably high productivity of 4470 µmolGVL gCat -1 h-1, one of the highest reported results. Mechanistic studies based on experimental and advanced characterisation and spectroscopic techniques, such as, SEM, TEM, 15N MAS NMR and 19F MAS NMR indicate that activity arises from the proper tuning of BAS/LAS (Brønsted Acid Site/Lewis Acid Site) acidic properties.

Promoter Effect of Pt on Zr Catalysts to Increase the Conversion of Furfural to γ-Valerolactone Using Batch and Continuous Flow Reactors: Influence of the Way of the Incorporation of the Pt Sites.

The valorization of biomass and its transformation into fuels are highly interesting due to the abundance of biomass and its almost neutral carbon emissions. In this article, we show the production of γ-valerolactone (GVL), a valuable product, from furfural (FF), a compound that can be easily obtained from biomass. This FF to GVL transformation involves a catalytic cascade reaction with two hydrogenation steps. Pt and/or Zr supported on sepiolite catalysts have been prepared and tested in the FF transformation reaction. A physical mixture of a Zr-based and a Pt-based catalyst has reached a yield to GVL of ca. 50% after 16 h at 180 °C. This performance largely exceeds that obtained by each of the single Pt or single Zr metal catalysts independently, showing a strong synergistic effect. These data suggest that each metal (Pt and Zr) plays an important and complementary role in different reaction steps. Furthermore, the physical mixture appears to be much more efficient than bimetallic Pt/Zr catalysts synthesized with the same amount of metals. The role of the type of acidity and the oxidation state of the surface platinum species on the catalytic performance has been discussed. Moreover, this reaction has been carried out in batch and continuous flow reactors, and a comparative study between the two operation modes has been undertaken. A certain correlation between the catalytic results obtained by both operation modes has been found.

Water-Resistant Photo-Crosslinked PEO/PEGDA Electrospun Nanofibers for Application in Catalysis.

Catalysts are used for producing the vast majority of chemical products. Usually, catalytic membranes are inorganic. However, when dealing with reactions conducted at low temperatures, such as in the production of fine chemicals, polymeric catalytic membranes are preferred due to a more competitive cost and easier tunability compared to inorganic ones. In the present work, nanofibrous mats made of poly(ethylene oxide), PEO, and poly(ethylene glycol) diacrylate, PEGDA, blends with the Au/Pd catalyst are proposed as catalytic membranes for water phase and low-temperature reactions. While PEO is a water-soluble polymer, its blending with PEGDA can be exploited to make the overall PEO/PEGDA blend nanofibers water-resistant upon photo-crosslinking. Thus, after the optimization of the blend solution (PEO molecular weight, PEO/PEGDA ratio, photoinitiator amount), electrospinning process, and UV irradiation time, the resulting nanofibrous mat is able to maintain the nanostructure in water. The addition of the Au6/Pd1 catalyst (supported on TiO2) in the PEO/PEGDA blend allows the production of a catalytic nanofibrous membrane. The reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP), taken as a water phase model reaction, demonstrates the potential usage of PEO-based membranes in catalysis.

Superacid Resin-Based Heterogeneous Catalysts for the Selective Acylation of 1,2-Methylenedioxybenzene.

In this work, we firstly report on the use of highly active and selective Aquivion superacid resins as heterogeneous catalysts for the acylation of 1,2-methylenedioxybenzene (MDB) with propionic anhydride (AP). The reaction was investigated and optimized using solvent-free conditions to selectively produce 3,4-methylenedioxypropiophenone (MDP1P), a key intermediate for the manufacture of active ingredients used in insecticide formulations with a volume of production of roughly 3000 t/y. Interestingly, Aquivion-based catalysts allows to work in mild reaction conditions (i. e. 80 °C), obtaining MDP1P yields as high as 44 % after only 1 h of reaction (selectivity 83 %). A detailed study of the AP reactivity demonstrated its tendency to promote oligomerization reactions that, as confirmed by ex-situ and in-situ FT-ATR analyses, caused the deactivation of the catalyst forming surficial carbonaceous residues. In this context, a fast oxidation of the resin surface organic residues using a diluted HNO3 (or H2 O2 ) solution was proven to be an efficient method to regenerate the catalyst, which can be reused for several reaction cycles. The results obtained in preliminary scale-up tests were basically unaffected by the reaction volume (up to 800 mL), paving the way for possible future applications of the process.

Composition Effect on the Formation of Oxide Phases by Thermal Decomposition of CuNiM(III) Layered Double Hydroxides with M(III) = Al, Fe.

The thermal decomposition processes of coprecipitated Cu-Ni-Al and Cu-Ni-Fe hydroxides and the formation of the mixed oxide phases were followed by thermogravimetry and derivative thermogravimetry analysis (TG - DTG) and in situ X-ray diffraction (XRD) in a temperature range from 25 to 800 °C. The as-prepared samples exhibited layered double hydroxide (LDH) with a rhombohedral structure for the Ni-richer Al- and Fe-bearing LDHs and a monoclinic structure for the CuAl LDH. Direct precipitation of CuO was also observed for the Cu-richest Fe-bearing samples. After the collapse of the LDHs, dehydration, dehydroxylation, and decarbonation occurred with an overlapping of these events to an extent, depending on the structure and composition, being more pronounced for the Fe-bearing rhombohedral LDHs and the monoclinic LDH. The Fe-bearing amorphous phases showed higher reactivity than the Al-bearing ones toward the crystallization of the mixed oxide phases. This reactivity was improved as the amount of embedded divalent cations increased. Moreover, the influence of copper was effective at a lower content than that of nickel.

Preface to Special Issue on Green Conversion of HMF.

In this Editorial, Guest Editors Stefania Albonetti, Changwei Hu, and Shunmugavel Saravanamurugan introduce the Special Issue of ChemSusChem on Green Conversion of HMF. The significance of and enormous challenges for the sustainable transformation of 5-hydroxymethylfurfural are reviewed, and the contents of the Special Issue with highly interesting contributions from scientists around the world are outlined.

Insights into the Electrochemical Reduction of 5-Hydroxymethylfurfural at High Current Densities.

The electrocatalytic reduction of 5-hydroxymethylfurfural (HMF) is highly selective to 2,5-bishydroxymethylfuran (BHMF) at pH=9.2, diluted HMF solutions, and low current densities. In this work, the electrochemical reduction of 0.05 m HMF solutions was investigated in the 5-50 mA cm-2 current density range over an AgCu foam electrocatalyst. The selectivity towards the formation of BHMF or the dimerization depended on the current density, likely due to differences in the electrode potential, and on the reaction time. Operating at current densities of 40-50 mA cm-2 allowed to find a trade-off between HMF and H2 O activation, achieving 85 % BHMF selectivity and fostering the productivity (0.567 mmol cm-2 h-1 ), though co-producing H2 . The electrochemical characterization by Tafel slopes and electrochemical impedance spectroscopy indicated that the HMF reduction was kinetically favored in comparison to the hydrogen evolution reaction and that the process was limited by charge transfer.

AgCu Bimetallic Electrocatalysts for the Reduction of Biomass-Derived Compounds.

The electrochemical transformation of biomass-derived compounds (e.g., aldehyde electroreduction to alcohols) is gaining increasing interest due to the sustainability of this process that can be exploited to produce value-added products from biowastes and renewable electricity. In this framework, the electrochemical conversion of 5-hydroxymethylfurfural (HMF) to 2,5-bis(hydroxymethyl)furan (BHMF) is studied. Nanostructured Ag deposited on Cu is an active and selective electrocatalyst for the formation of BHMF in basic media. However, this catalyst deserves further research to elucidate the role of the morphology and size of the coated particles in its performance as well as the actual catalyst surface composition and its stability. Herein, Ag is coated on Cu open-cell foams by electrodeposition and galvanic displacement to generate different catalyst morphologies, deepening on the particle growth mechanism, and the samples are compared with bare Ag and Cu foams. The chemical-physical and electrochemical properties of the as-prepared and spent catalysts are correlated to the electroactivity in the HMF conversion and its selectivity toward the formation of BHMF during electroreduction. AgCu bimetallic nanoparticles or dendrites are formed on electrodeposited and displaced catalysts, respectively, whose surface is Cu-enriched along with electrochemical tests. Both types of bimetallic AgCu particles evidence a superior electroactive surface area as well as an enhanced charge and mass transfer in comparison with the bare Ag and Cu foams. These features together with a synergistic role between Ag and Cu superficial active sites could be related to the twofold enhanced selectivity of the Ag/Cu catalysts for the selective conversion of HMF to BHMF, that is, >80% selectivity and ∼ 100% conversion, and BHMF productivity values (0.206 and 0.280 mmol cm-2 h-1) ca. 1.5-3 times higher than those previously reported.

5-Hydroxymethyl-2-Furfural Oxidation Over Au/CexZr1-xO2 Catalysts.

A series of gold catalysts supported on pure CeO2, ZrO2, and two different Ce-Zr mixed oxides have been prepared and tested in the 5-hydroxymethyl-2-furfural oxidation reaction. All catalysts show high catalytic activity (100% conversion) and important selectivity (27-41%) to the desired product i.e., 2,5-furandicarboxylic acid at low base concentration. Products selectivity changes with the support nature as expected, however, the observed trend cannot be related neither to gold particle size, nor to catalyst reducibility and oxygen mobility. An important relation between the FDCA selectivity and the support textural properties is observed, conducing to the general requirement for optimal pore size for this reaction.

Scale-Up of Cluster Beam Deposition to the Gram Scale with the Matrix Assembly Cluster Source for Heterogeneous Catalysis (Catalytic Ozonation of Nitrophenol in Aqueous Solution).

The deposition of precisely controlled clusters from the beam onto suitable supports represents a novel method to prepare advanced cluster-based catalysts. In principle, cluster size, composition, and morphology can be tuned or selected prior to deposition. The newly invented matrix assembly cluster source (MACS) offers one solution to the long-standing problem of low cluster deposition rate. Demonstrations of the cluster activities under realistic reaction conditions are now needed. We deposited elemental silver (Ag) and gold (Au) clusters onto gram-scale powders of commercial titanium dioxide (TiO2) to investigate the catalytic oxidation of nitrophenol (a representative pollutant in water) by ozone in aqueous solution, as relevant to the removal of waste drugs from the water supply. A range of techniques, including scanning transmission electron microscopy (STEM), Brunauer-Emmett-Teller (BET) surface area test, and X-ray photoelectron spectroscopy (XPS), were employed to reveal the catalyst size, morphology, surface area, and oxidation state. Both the Ag and Au cluster catalysts proved active for the nitrophenol ozonation. The cluster catalysts showed activities at least comparable to those of catalysts made by traditional chemical methods in the literature, demonstrating the potential applications of the cluster beam deposition method for practical heterogeneous catalysis in solution.

Structural relaxation around Cr3+ in YAlO3-YCrO3 perovskites from electron absorption spectra.

The structural relaxation around Cr(3+) in YAl(1-x)Cr(x)O(3) perovskites was investigated and compared with analogous Cr-Al joins (corundum, spinel, garnet). Eight compositions (x(Cr)((3+)) from 0 to 1) were prepared by sol-gel combustion and were analyzed by a combined X-ray diffraction (XRD) and electron absorption spectroscopy (EAS) approach. The unit cell parameters and the XRD averaged octahedral (Cr,Al)-O and ([VIII])Y-O bond distances scale linearly with the chromium fraction. The optical parameters show an expected decrease of crystal field strength (10Dq) and an increase of covalency (B(35)) and polarizability (B(55)) toward YCrO(3), but a nonlinear trend outlines some excess 10Dq below x(Cr)((3+)) approximately 0.4. The local Cr-O bond lengths, as calculated from EAS, indicate a compression from 1.98 A (x(Cr)((3+)) = 1.0) down to 1.95 A (x(Cr)((3+)) = 0.035) so that the relaxation coefficient of perovskite (epsilon = 0.54) is the lowest in comparison with garnet (epsilon = 0.74), spinel (epsilon = 0.68), and corundum (epsilon = 0.58) in contrast with its structural features. The enhanced covalent character of the Cr(3+)-O-Cr(3+) bond in the one-dimensional arrangement of corner-sharing octahedra can be invoked as a factor limiting the perovskite polyhedral network flexibility. The increased probability of Cr-O-Cr clusters for x(Cr)((3+)) greater than approximately 0.4 is associated to diverging trends of nonequivalent interoctahedral angles. The relatively low relaxation degree of Y(Al,Cr)O(3) can be also understood by considering an additional contribution to 10Dq because of the electrostatic potential of the rest of the lattice ions upon the localized electrons of the CrO(6) octahedron. Such an "excess" of 10Dq increases when the point symmetry of the Cr site is low, as in perovskite, and would be affected by the change of yttrium effective coordination number observed by XRD for x(Cr)((3+)) greater than approximately 0.4. This would justify the systematic underestimation of local Cr-O bond distances, as inferred from EAS, compared to what is derived from X-ray absorption (XAS) studies implying a stronger degree of relaxation around Cr(3+) of all the structures considered and supporting the hypothesis that 10Dq from EAS contains more information than previously retained particularly an additional contribution from the next nearest neighboring ions.

Bimetallic Nanoparticles as Efficient Catalysts: Facile and Green Microwave Synthesis.

This work deals with the development of a green and versatile synthesis of stable mono- and bi-metallic colloids by means of microwave heating and exploiting ecofriendly reagents: water as the solvent, glucose as a mild and non-toxic reducer and polyvinylpirrolidone (PVP) as the chelating agent. Particle size-control, total reaction yield and long-term stability of colloids were achieved with this method of preparation. All of the materials were tested as effective catalysts in the reduction of p-nitrophenol in the presence of NaBH4 as the probe reaction. A synergistic positive effect of the bimetallic phase was assessed for Au/Cu and Pd/Au alloy nanoparticles, the latter showing the highest catalytic performance. Moreover, monoand bi-metallic colloids were used to prepare TiO2- and CeO2-supported catalysts for the liquid phase oxidation of 5-hydroxymethylfufural (HMF) to 2,5-furandicarboxylic acid (FDCA). The use of Au/Cu and Au/Pd bimetallic catalysts led to an increase in FDCA selectivity. Finally, preformed Pd/Cu nanoparticles were incorporated into the structure of MCM-41-silica. The resulting Pd/Cu MCM-41 catalysts were tested in the hydrodechlorination of CF3OCFClCF2Cl to CF3OCF=CF2. The effect of Cu on the hydrogenating properties of Pd was demonstrated.

Substrate and product role in the Shvo's catalyzed selective hydrogenation of the platform bio-based chemical 5-hydroxymethylfurfural.

The bio-based substrate and target product 2,5-bishydroxymethylfuran (BHMF) demonstrated to influence the reaction kinetics in the homogeneous reduction of 5-hydroxymethylfurfural (HMF) catalyzed by the Ru-based Shvo's catalyst. A combined experimental and computational study supports an important role of the -CH2OH moiety which may be involved in the catalytic cycle toward the formation of different intermediates from HMF and BHMF. The reaction is selective and leads to quantitative formation of BHMF working under mild conditions. Furthermore, an optimized recycling procedure which avoids the use of water, allows recover and reuse of the catalyst without loss of activity. The mechanistic insights from this work may be extended to provide a general description of the chemistry of the Shvo's catalyst feeding further bio-based molecules.

Solvothermal synthesis and properties control of doped ZnO nanoparticles.

Indium and gallium doped ZnO nanoparticles have been prepared by a hydrothermal reaction in ethanol and methoxyethanol. A comprehensive study of the preparation process, including a thorough investigation by TG-FTIR and TG-MS of the thermal-purification procedure, is presented. Moreover, the effect of thermal conditions and dopant concentration on the structural and optical properties is discussed on the basis of XRD, TEM and UV-vis-NIR results. Reported data indicated that the use of methoxyethanol as a solvent allows an enhanced control of nanoparticle size and favours dopant incorporation into zinc oxide. Near infrared absorption of these materials can be strongly affected by increasing the doping level and upon treating nanoparticles under reducing atmosphere. Preliminary study indicated that this effect is greatly enhanced for gallium-doped zinc oxide.