RESUMO
This study focuses on the influence of electrospray deposition parameters on the morphology, topography, optical and sensing properties of ZnO films deposited on gold electrodes of quartz crystal resonators. The substrate temperature, precursor feed rate and emitter's voltage were varied. Zinc acetate dehydrate dissolved in a mixture of deionized water, ethanol and acetic acid was used as a precursor. The surface morphology and average roughness of the films were studied by scanning electron microscopy (SEM) and 3D optical profilometry, respectively, while the optical properties were investigated by diffuse reflectance and photoluminescence measurements. The sensing response toward ammonia was tested and verified by the quartz crystal microbalance (QCM) method. The studies demonstrated that electrospray deposition parameters strongly influence the surface morphology, roughness and gas sensing properties of the films. The deposition parameters were optimized in order for the highest sensitivity toward ammonia to be achieved. The successful implementation of the electrospray method as a simple, versatile and low-cost method for deposition of ammonia-sensitive and selective ZnO films used as a sensing medium in QCM sensors was demonstrated and discussed.
RESUMO
This paper presents a complex analytical study on the distribution, solubility, amorphization, and compatibility of diltiazem within the composition of Eudragit RS 100-based particles of microspongeous type. For this purpose, a methodology combining attenuated total reflectance Fourier transform infrared (ATR-FTIR) absorption spectroscopy, differential scanning calorimetry (DSC), scanning electron microscopy with energy-dispersive X-ray microanalysis (SEM-EDX), and in vitro dissolution study is proposed. The correct interpretation of the FTIR and drug-dissolution results was guaranteed by the implementation of two contrasting reference models: physical drug-polymer mixtures and casting-obtained, molecularly dispersed drug-polymer composites (solid dispersions). The spectral behavior of the drug-polymer composites in the carbonyl frequency (νCO) region was used as a quality marker for the degree of their interaction/mutual solubility. A spectral-pattern similarity between the microsponge particles and the solid dispersions indicated the molecular-type dispersion of the former. The comparative drug-desorption study and the qualitative observations over the DSC and SEM-EDX results confirmed the successful synthesis of a homogeneous coamorphous microsponge-type formulation with excellent drug-loading capacity and "controlled" dissolution profile. Among them, the drug-delivery particles with 25% diltiazem content (M-25) were recognized as the most promising, with the highest population of drug molecules in the polymer bulk and the most suitable desorption profile. Furthermore, an economical and effective analytical algorithm was developed for the comprehensive physicochemical characterization of complex delivery systems of this kind.
RESUMO
The mass sensitivity of thin aluminum nitride (AlN) film S0 Lamb wave resonators is theoretically and experimentally studied. Theoretical predictions based on modal and finite elements method analysis are experimentally verified. Here, two-port 888 MHz synchronous FPARs are micromachined and subsequently coated with hexamethyl-disiloxane(HMDSO)-plasma-polymerized thin films of various thicknesses. Systematic data on frequency shift and insertion loss versus film thickness are presented. FPARs demonstrate high mass-loading sensitivity as well as good tolerance towards the HMDSO viscous losses. Initial measurements in gas phase environment are further presented.
RESUMO
A specific version of the quartz crystal microbalance method has been proposed for quantitative evaluation of drug content in polymeric drug carrier systems. In this study, ammonio methacrylate copolymer (type B) microparticles and their standard solutions have been prepared and loaded with set amounts of the medications diltiazem (base) and lidocaine. The analytes have been segregatim deposited on the surface of the resonator and the drug content in them has been derived from the downshift of the resonance frequency produced by irreversible interaction of the drug molecules with irradiating hydrochloric gas. The obtained results have been statistically processed on a number of samples and have been found to exhibit excellent coherence to set theoretical values. As an alternative, the conventional pharmacopoeial UV-Vis spectral method has also been separately applied to studied samples, revealing worsened performance in the case of lidocaine due to polymer matrix interference. Thus the universality of the QCM method has been proved to add to its versatility and precision. The method appears to be readily applicable to the routine pharmaceutical quantity control of bulk and multiparticulate drug forms.
Assuntos
Resinas Acrílicas/química , Diltiazem/análise , Sistemas de Liberação de Medicamentos , Técnicas de Microbalança de Cristal de Quartzo , Estrutura Molecular , Espectrofotometria Ultravioleta , Propriedades de SuperfícieRESUMO
In this work we present a study on the growth and the gas sensing properties of poly(urethane imide) thin films. We first deeply characterized by atomic force microscopy (AFM) the nanostructuration of the poly(urethane imide) holding different amine groups. We further studied the interaction between highly toxic gases such as hexamethyleneimine (HMI) and pyridine and the polymer by using an unconventional method based on Quartz Crystal Microbalance (QCM) measurement. We showed for the first time that weak interactions, i.e. hydrogen bonding between the gas molecules and the polymer film allow the diffusion of the gas molecule deep in the polymeric film and the recovery of the film once the gas molecules leave the sensor. This first work paves a new way for the design of a completely recoverable sensor able to detect highly toxic gases for environmental concern.
RESUMO
A 1 GHz surface transverse wave resonator on 36 degrees Y-cut quartz plate coated with organothiol-functionalized gold nanoparticle film has been studied as a chemical gas sensor. Considerable sensitivity of the resonant frequency to vapors of ethanol, methanol, chloroform, and acetic acid has been found. Owing to the high short-term stability of the oscillator built, the detection limit is in the low ppm range. The results qualitatively confirm previous results on the same film type obtained by conductivity measurements. In the present case, the conductivity effect resulting from variable separation of nanoparticles is accompanied with surface-attached mass of the absorbed gas. The film matrix exhibits considerable capacity to absorb large amounts of molecules at high gas concentrations.