Influence of CAD-CAM manufacturing methods on the accuracy and mechanical properties of implant-supported prostheses: A systematic review.

PURPOSE: This systematic review aimed to provide comprehensive insights on the accuracy, fit, and mechanical characteristics of implant-supported computer-aided design and computer-aided manufacturing (CAD-CAM) prostheses, with a focus on milled and 3D-printed approaches. METHODS: The research question focused on implant-supported dental prostheses, comparing different manufacturing techniques (conventional, milled, and 3D-printed) to determine the different factors affecting the mechanical properties and fit of the CAD-CAM implant-supported prosthesis. The eligibility criteria encompassed studies involving implant-supported restorations, clear reporting of manufacturing techniques, and English-language publications from the last decade. The search was conducted across three main databases, MEDLINE, Scopus, and Web of Science in September 2023. Publication details, study characteristics, and methodological details of each included study were described. RESULTS: Of the initial 1964 articles, 581 met the inclusion criteria, and 104 studies were included in the final qualitative analysis. The majority of studies were conducted in the United States, Turkey, and Brazil. Fourteen studies evaluated accuracy parameters, while four studies focused on mechanical characteristics. The studies revealed variability in mechanical properties and marginal and internal fit, with fabrication methods impacting the structural integrity and stress distribution of the prostheses. CONCLUSIONS: The findings suggest that digital manufacturing workflows, both milling and 3D printing, yield acceptable properties for implant-supported restorations with minimal variations in fit and accuracy. Notably, 3D printing and hybrid techniques demonstrate advantages in specific aspects like marginal fit and stress distribution. However, the milled prosthesis provided superior results in flexural strength and fracture resistance compared to conventional methods. Further research is needed to confirm these findings in clinical settings.

Neglected Posterior Dislocation Hip Post Acetabulum Fixation: Case Report.

Introduction: An acetabular fracture is a relatively uncommon injury. An acetabular fracture can occur in conjunction with a posterior hip dislocation. Oni defined neglected hip dislocation as dislocation lasting more than 1 week after injury. Case Report: We present a 31-year-old male involved in a road traffic accident 6 months ago. He had 5 cm of shortening on examination, and the sciatic nerve was intact. The patient had post-traumatic arthritis and was counseled for total hip arthroplasty (THA) and its complications. Conclusion: Neglected posterior dislocation of the hip after acetabular fracture fixation is rare these days. It is a time-sensitive medical emergency that must be reduced within 6 h to avoid its complications, especially avascular necrosis and post-traumatic arthritis.

Assessment of color stability and translucency of various CAD/CAM ceramics of different compositions and Thicknesses: An in vitro study.

Background: Translucency and optical characteristics significantly affect the aesthetics of ceramic restorations. The introduction of new virgilite crystals to novel ceramic advanced lithium disilicate through a matrix firing process enhances the material's strength and aesthetic quality according to the manufacturer. Materials and Methods: Four types of CAD/CAM ceramics; lithium disilicate (LD), leucite reinforced (LR), advanced lithium disilicate (ALD), and zirconia-reinforced lithium silicate (ZLS) exposed to different staining solutions (tea, cola, coffee, and distilled water). Each ceramic type had 120 specimens, divided into subgroups based on thickness (0.5 mm, 1 mm, and 1.5 mm). Color changes (ΔE00) and translucency parameters (TP00) were measured after thermocycling, and spectrophotometry was employed to evaluate ΔE00 and TP00 after 1, 7, and 30 days of exposure to the staining solutions. Results: ZLS exhibited the lowest color stability, while lithium LD and ALD displayed the highest. Thickness significantly affected color stability, with 0.5 mm thickness showing the least change. The duration of exposure also impacted color changes, with 30 days causing the most significant shift. LD demonstrated the highest translucency. Coffee and tea induced more pronounced reductions in translucency and color stability compared to the control group. Conclusions: Material structure, thickness, staining solution, and exposure duration significantly influenced the color stability and translucency of CAD/CAM ceramics, with LD and ALD demonstrating superior color stability and LD exhibiting the highest translucency.

Knowledge and attitude of dental students regarding etiology, diagnosis, and treatment of peri-implantitis.

OBJECTIVE: The objective of this study was to assess the level of knowledge and attitude of dental students about the etiology, diagnosis, and management of peri-implantitis. METHODS: An online cross-sectional study that targeted senior undergraduate dental students at the College of Dentistry was conducted. A closed-ended survey consisting of 28 questions was designed. Three sections were created: 1) participants' characteristics; 2) Knowledge of peri-implantitis etiology, risk factors, diagnosis, and complications; 3) The use of antibiotics in peri-implantitis, diagnosis, and treatment methods. SPSS version 22 (IBM Corp.) was used for data analysis. Counts and percentages were calculated for correct answers in each section. RESULTS: A total of 267 dental students responded to the questionnaire. The majority of the participants (81.6%) were knowledgeable about peri-implantitis being an inflammatory reaction, and a lesser percentage (77.9%) knew that bacterial plaque is an etiologic factor for peri-implant diseases. 82.0% of the participants identified smoking as a risk factor, followed by periodontitis (80.5%). Regarding implant complications, 57.3% of the participants considered implant mobility as a definitive indication for implant removal. More than half of the participants reported using crater-like bone defects surrounding implants to diagnose peri-implantitis. The most commonly used antibiotic was amoxicillin (34.1%), followed by amoxicillin combined with metronidazole (26.9%). CONCLUSION: Most participants had a basic understanding of the etiology and risk factors of peri-implantitis. On the other hand, more courses addressing peri-implantitis diagnosis are needed.

Assessment of Oral Health Status and Pregnancy Outcomes Among Women in Saudi Arabia.

Purpose: Pregnant women witness many changes in the body as well as in the oral cavity with many factors influencing these changes. This study evaluated the relationship between oral health status, perceptions, and pregnancy outcomes. Methods: A cross sectional study design was implemented to recruit a convenience sample of women attending Obstetrics and gynecology department in public hospitals in East and capital city of Saudi Arabia. To collect data, a validated self-administered questionnaire in English and Arabic was used. The questionnaire covered background information, perceived oral health status, and dental visits. Results: About 64.4% of the 481 women recruited had dental problems, 49.7% reported deterioration in their oral health during pregnancy, and 17.5% reported adverse pregnancy outcomes. Only 40.7% of pregnant women rated their oral health as good, and only 22% visited a dentist during their pregnancy. Dentists were the most common source of oral health information (44.1%), followed by social media (38.9%). Dental problems during pregnancy were significantly associated with adverse outcomes (P=0.007). Oral health perceptions of pregnant women, not visiting the dentist during pregnancy, and gingival problems were also significantly associated with adverse pregnancy outcomes (P=0.001). Those with fair to poor oral health were twice as likely to experience adverse pregnancy outcome. Those who intended to visit the dentist during their pregnancy but did not do so, as well as those who did not visit the dentist at all were 12 and 9 times more likely to experience adverse pregnancy outcomes respectively. Conclusion: Dental complaints during pregnancy, oral health perceptions, and a lack of dental visits were all linked to increased likelihood of adverse pregnancy outcomes. There is a need for interprofessional collaboration to dispel myths and encourage oral health care and regular dental visits during pregnancy.

Impact of combining dental composite brushes with modeling resins on the color stability and topographic features of composites.

This study explores the effect of using dental brushes with or without metacrylate-based modeling resins on long-term color stability and surface topographies of resin-based composites. This study examined the effects of two variables: (1) the type of brush used (Art brush, Micro-brush, or Mylar strip) and (2) the application of a modeling resin (applied or not applied). The specimens were artificially aged through 10,000 cycles of thermocycling and subsequently immersed in coffee for 30 days. Measurements of color and surface roughness were taken at baseline and after the aging, using a non-contact profilometer for surface roughness and a spectrophotometer for color. Data were analyzed using paired t-tests and one-way ANOVA. Resin-based composites smoothed with dental brushes or micro brushes without modeling resins exhibited lower color change (ΔE) than other groups. Paired t-tests revealed significant differences in average surface roughness (Ra) and valley depth (Rv) for each surfacing technique before and after aging (p ⩽ 0.01). The root means square average of the profile heights (Rq) significantly increased in the control and micro-brush groups (p ⩽ 0.01). In conclusion, the use of brushes in resin-based composites placement does not increase the susceptibility to staining. Instead, the inclusion of resin modeling contributes to discoloration over time.

Influences of Different CAD/CAM Ceramic Compositions and Thicknesses on the Mechanical Properties of Ceramic Restorations: An In Vitro Study.

The aim of this study was to assess the influences of different CAD/CAM ceramic compositions and thicknesses on the surface roughness and hardness of ceramic restorations. Four different ceramics were used in the current study: lithium disilicate (LD), leucite reinforced (LE), advanced lithium disilicate (ALD), and zirconia-reinforced lithium silicate (ZLS). Each group included 30 specimens subdivided into three different ceramic thicknesses (0.5, 1 and 1.5 mm thicknesses). The microhardness was measured for all the specimens using a microhardness testing machine, while the surface roughness was measured using a non-contact optical profilometer at three intervals (before toothbrushing and after toothbrushing, with and without toothpaste). Three-way and two-way ANOVA were used to determine the factors influencing the surface roughness and microhardness. There was a significant difference in the surface roughness between the studied groups for all the thicknesses. The findings showed that ALD had the lowest surface roughness, while ZLS showed the highest surface roughness. Moreover, ALD, followed by ZLS, had the highest hardness, while LD and LE had the lowest hardness values. Regarding the thicknesses, both the 0.5 and 1 mm ceramic thicknesses showed a significantly lower surface roughness than the 1.5 mm thickness, while the 1.5 mm thickness showed a significantly higher microhardness than the 0.5 mm thickness. The surface roughness and hardness were significantly affected by the ceramic composition and type of filler. It is recommended to use 1.5 mm-thick ceramic materials for the fabrication of definitive full-coverage ceramic restorations, while veneers require 0.5 mm-thick materials. ALD is a promising CAD/CAM material that can be used for the fabrication of restorations with a proper strength in both anterior and posterior regions.

Radiographic assessment of dental post and core placement at different educational levels in an undergraduate student clinic: a 4-year retrospective study.

Background: Dental post and core is one of the common procedures performed after endodontic treatment. The aim of this study was to radiographically assess the quality of post and core procedures performed by dental students at different education levels in addition to determining the most critical errors encountered during their clinical practice. Methods: A retrospective cross-sectional study design was conducted in the College of Dentistry, Imam Abdulrahman Bin Faisal University. A total of 550 periapical radiographs (PAs) of cemented posts were retrieved from the records of patients treated by dental students. Parameters and guidelines for assessing the quality of post treatment have been determined and statistically analyzed. A P value <0.05 was considered statistically significant. Results: The study included 502 students and most of them were females (66.5%). Data were obtained from 502 patients (62% females) with fiber posts used in 98.2% of the cases. About 50% of the posts were inserted in premolars, 62.9% in the upper arch, and 66.7% were restored with crowns as a final restoration. Regarding the quality of posts, 98.4% showed good preparation quality and 98% showed good radiographic quality. The post diameter was equal to 1/3 of the root diameter in 31.9% of the cases; post length was equal to 2/3 of root length in 5% of the cases and equal to or more than crown height in all cases (100%). Length of the remaining gutta percha (GP) was between 3-5 mm in 38.8%, and there was no gap between the post and remaining GP in 95.6% of the cases. There were no statistically significant differences between dental students at different clinical educational levels regarding the quality of post placement. Conclusions: The quality of post and core procedures performed by students showed acceptable radiographic quality and were within the recommended standards.

The Effect of Coronal Pre-flaring and Type of Root Canal Irrigation on Working Length Accuracy Using Electronic Apex Locators.

Background: Successful root canal treatment is influenced by the apical extent of root canal preparation and the eventual root canal filling. Achieving the full working length until the apical constriction, which is usually 0.5 - 1 mm shorter than the anatomical apex, is crucial. Electronic apex locators were used to detect the working length more accurately. There are six generations of electronic apex locators in the market. The selection of the appropriate irrigation with each apex locator for accurate working length determination is not fully investigated. Methods: The actual working lengths of 120 freshly extracted human single-rooted teeth were measured and compared with their working lengths using 3 rd generation (Root ZX) followed by 6 th generation (Raypex 6) apex locators in dry medium, presence of 5.25% sodium hypochlorite, and 2% chlorhexidine, without coronal pre-flaring and after coronal pre-flaring using the same irrigating media. Data were collected, tabulated, and afterward analyzed using one-way ANOVA with post-hoc to evaluate the significant difference in average working length between actual working length, Root ZX, and Raypex 6 apex locator working lengths accuracy. Results: The significant results were shown in roots that were coronally pre-flared and their working lengths were measured in a dry medium using Raypex 6 apex locator. While using the Root ZX apex locator, the most accurate results were shown in roots that were coronally pre-flared and their working lengths were measured while using a chlorhexidine irrigating solution. Conclusions: It is concluded that it is very important to know the specific irrigating medium to be used with each specific electronic apex locator to achieve the most accurate working length results.

Effect of Different Scaling Methods on the Surface Topography of Different CAD/CAM Ceramic Compositions.

This study evaluated the effect of ultrasonic and manual scaling using different scaler materials on the surface topography of computer-aided designing and computer-aided manufacturing (CAD/CAM) ceramic compositions. After scaling with manual and ultrasonic scalers, the surface properties of four classes of CAD/CAM ceramic discs: lithium disilicate (IPE), leucite-reinforced (IPS), advanced lithium disilicate (CT), and zirconia-reinforced lithium silicate (CD) of 1.5 mm thickness were evaluated. Surface roughness was measured before and after treatment, and scanning electron microscopy was used to evaluate the surface topography following the performed scaling procedures. Two-way ANOVA was conducted to assess the association of the ceramic material and scaling method with the surface roughness. There was a significant difference in the surface roughness between the ceramic materials subjected to different scaling methods (p < 0.001). Post-hoc analyses revealed significant differences between all groups except for IPE and IPS where no significant differences were detected between them. CD showed the highest surface roughness values, while CT showed the lowest surface roughness values for the control specimens and after exposure to different scaling methods. Moreover, the specimens subjected to ultrasonic scaling displayed the highest roughness values, while the least surface roughness was noted with the plastic scaling method.

Assessment of Modality and Accuracy of Single Root Canal Treatment Performed by Undergraduate Students in Saudi Arabia: A Retrospective Study.

Aim To assess the radiographic quality of root canal treatment (RCT) performed on single-rooted anterior teeth by undergraduate dental students of Imam Abdulrahman Bin Faisal University (IAU). Moreover, the study also aimed to assess the types of procedural errors encountered during root canal treatment and to compare the results between male and female students. Methodology The record of patients who visited the endodontic clinics at IAU between the years 2018 and 2021 was obtained from the medical records department. The inclusion criteria for the study involved: i) RCT performed on anterior teeth with a single root; ii) RCT performed by fourth, fifth, and sixth-year undergraduate dental students; and iii) availability of pre-operative and post-operative peri-apical radiographs. After the inclusion criteria, a total of 278 records were selected. The radiographs were accessed by two calibrated examiners for the length of the obturation, homogeneity, and taper. In addition, procedural errors such as the presence of a ledge, perforation, or fractured instruments were also observed. Analysis was done using the Chi-square test. Results A total of 139 teeth (50%) were found to have an adequate quality root canal treatment. Regarding the length of the obturation, 85.6% were considered acceptable, while 65.1% of the obturations had acceptable radiographic homogeneity. The acceptable taper was found in 71.9% of the obturations. Dental students who participated in this study demonstrated a low rate of procedural errors, with 4.7% ledge formation and 1% perforation. A statistically significant difference was found in the quality of root canal obturation (P = <0.001) performed by fourth, fifth, and sixth-year students. Moreover, a significant difference was also observed between maxillary and mandibular teeth (P= 0.032). Conclusion The quality of RCT performed by undergraduate dental students demonstrated that improvements are required. The teaching methods used in the endodontic courses need to be developed and improved to ensure the best possible learning and treatment outcomes.

Cytotoxicity of Commercially Pure Titanium (cpTi), Silver-Palladium (Ag-Pd), and Nickel-Chromium (Ni-Cr) Alloys Commonly Used in the Fabrication of Dental Prosthetic Restorations.

INTRODUCTION: The longevity of dental implants is affected by the ability to avoid any hypersensitivity or corrosive reactions in the oral cavity. The aim of the current study was to evaluate the cytotoxic effect of commercially pure titanium (cpTi), silver-palladium (Ag-Pd), and nickel-chromium (Ni-Cr) on human gingival fibroblast (HGF). METHODS: The sample size used was 10 discs from each alloy used with dimensions of 4x3mm. The HGF was derived from healthy patients subjected to gingivectomy procedures. Of the specimens, 50% were incubated in artificial saliva and the other half in Dulbecco's Modified Eagle medium (DMEM). The extract of each alloy in both media was collected and applied on HGF. After 24 hours the morphology of the HGF cells was examined to detect any apoptosis or cell death. Also, cell viability was evaluated by the use of a 3-(4,5-dimethyl thiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. Statistical analysis was performed using students' t-test and two-way ANOVA with a significance level of p<0.05. RESULTS: In the case of morphological examination of HGF and MTT assessment, only cpTi alloy specimens didn't display any cytotoxic effect. Ni-Cr was the most cytotoxic alloy of the three. Also, MTT activities of all three alloys were decreased when they were incubated in artificial saliva. CONCLUSION: cpTi exhibited the highest corrosion resistance in comparison to Ag-Pd and Ni-Cr alloys. Ag-Pd alloys showed acceptable resistance to corrosion that is due to the passivity effect. Also, artificial saliva increased the cytotoxic effect of the tested alloys more than DMEM.

Is It Mum or the Dad? Parental Factors That Influence the Use and Acceptance of Fluoride Varnish among Parents in Eastern Saudi Arabia.

Objective: To investigate parental factors that influence knowledge, use, and acceptance of fluoride varnish (FLV) application. Methods: This cross-sectional study was conducted during December 2021. A multistage sampling technique was used to recruit parents with children aged 3 to 6 years and residing in Eastern Saudi Arabia, excluding those working in the dental field. The questionnaire consisted of four parts: demographics, knowledge, previous experience, and acceptance of FLV and was pilot-tested and distributed online using social media. Results: A total of 623 parents responded to the survey. Only 36.9% of parents had good FLV knowledge with dentists being the main source of information. Gender, educational level, family income, being in the medical field, and source of knowledge were factors that significantly (P < 0.05) influenced parental knowledge. Only 24.6% of the parents applied fluoride varnish to their children before, of whom only 29% were satisfied with the experience. Parent's FLV knowledge, view of dental visits, satisfaction with previous experience, perception of children's oral health, and willingness to reapply FLV were factors that significantly (P < 0.05) influenced FLV use. Working in the medical field, perception of dental visits, and the source of knowledge were factors that significantly (P < 0.05) influenced the parent's acceptance to apply FLV. While lack of knowledge about fluoride benefits (15%) was the main reason for parental refusal to apply FLV. Conclusions: The current study highlights the lack of knowledge and application of FLV among parents. There were more factors influencing mothers' acceptance of FLV application compared to fathers. Age, educational level, working in the medical field, perception, and patterns of dental visits were some of the identified factors. Dentists played a major role in parental knowledge and FLV acceptance. In a country with high caries prevalence, preventive programs such as FLV education and application are crucial.

Effect of the Addition of Varying Concentrations of Silver Nanoparticles on the Fluoride Uptake and Recharge of Glass Ionomer Cement.

This study aimed to compare the amount of fluoride uptake and the recharge and release characteristics of conventional glass ionomer cement (GIC) without any additives in comparison to conventional glass ionomer cement supplemented with silver nanoparticles (AgNPs) at two concentrations: 0.1% and 0.2% (w/w). A total of 60 specimens were used in this in vitro study. The sample was divided into six groups­including three groups without fluoride charge: Group 1 (conventional GIC), Group 2 (GIC with 0.1% silver nanoparticles), and Group 3 (GIC with 0.2% silver nanoparticles; and three groups with fluoride charge: Group 4 (conventional GIC with fluoride); Group 5 (GIC with 0.1% silver nanoparticles with fluoride); Group 6 (GIC with 0.2% silver nanoparticles with fluoride), where Group 1 is considered the control group and the other five groups are used as the test groups. The amount of fluoride released was measured on days 1, 2, 7, 15, and 30. The comparisons were made between the groups with and without fluoride and among all the groups. A significant difference in the amount of fluoride released was observed between the groups, with the highest amount occurring in Group 1, followed by Group 2; the lowest amount of fluoride released was observed in Group 3 (p < 0.05). The groups with fluoride recharge (Groups 4, 5, and 6) exhibited a higher amount of fluoride release than the groups with no recharge (Groups 1, 2, and 3); however, Group 1 has more fluoride release compared to all other groups on days 1, 2, 7, 15, and 30 (p < 0.05). The amount of released fluoride decreased from day 1 to day 30 in all of the groups in the study. Despite the antimicrobial and anticariogenic benefits of adding silver nanoparticles to GIC, it seems that fluoride release characteristics are significantly affected by the addition of this material. This may force the clinician to a compromise between the antimicrobial benefit of silver nanoparticles and the remineralizing advantage of fluoride.

Laboratory Diagnostic Methods and Antibiotic Resistance Patterns of Staphylococcus aureus and Escherichia coli Strains: An Evolving Human Health Challenge.

Raw ground meat is known as a transmission vehicle for biological agents that may be harmful to human health. The objective of the present study was to assess microbiological quality of the ground meats. A total of 280 samples of local and imported chilled meats were randomly collected from retail shops in Buraydah City, Saudi Arabia. The meat samples were microbiologically analyzed using standard methods, peptide mass fingerprinting (PMF) technique, MicroScan Walkaway System (MicroScan) and qPCR System. The imported meat was more bacterially contaminated than local meat, with variable contamination degrees of Staphylococcus aureus (40.33%), Escherichia coli (36.13%), Hafnia alvei (7.56%), Pseudomonas spp. (6.72%), Salmonella spp. (5.88%) and Aeromonas spp. (3.36%). PMF verified all the isolated bacteria by 100%, compared to 75-95% achieved by MicroScan. The gene encoding flagellin (fliC) was recognized in 67.44% of E. coli strains, while the thermonuclease (nuc) and methicillin resistance (mecA) genes were detected in 100% S. aureus and 39.6% of methicillin-resistant S. aureus (MRSA) strains, respectively. The S. aureus and E. coli strains were highly resistant to multiple antibiotics (e.g., ampicillin, amoxicillin-clavulanic acid and cephalothin). For identifying various foodborne pathogens, PMF has been recognized as a powerful and precise analytical method. In light of the increasing use of PMF to detect multidrug-resistant bacteria, this study emphasizes the need for improved ways of treating and preventing pathogens, as well as setting up monitoring systems to guarantee hygiene and safety in meat production.

Management of Latent Tuberculosis Infection in Saudi Arabia: Knowledge and Perceptions Among Healthcare Workers.

Background Tuberculosis (TB) continues to pose a serious threat to public health despite great efforts. For many years, management and screening for active TB cases have been the main focus of TB control programs. Latent TB is a stage where TB can be prevented and controlled. Therefore, designing a comprehensive TB control program that includes latent tuberculosis infection (LTBI) management diseases is needed to be implemented among the healthcare workers (HCWs) who have been found to be at a higher risk for active TB compared to the general population. The objective of the study The objective of the study is to assess the knowledge and perceptions of LTBI among HCWs. In addition to estimating the prevalence of LTBI among HCWs using closed-end questions in a self-administered questionnaire. Subjects and methods Through a cross-sectional study and non-random sampling technique, 324 (84%) healthcare workers who met the inclusion criteria completed and submitted the electronic questionnaire. Results Among all participants, the study reported a good knowledge about LTBI; however, a third of HCWs had poor knowledge about the difference between LTBI and active TB. Eighteen percent of participants were diagnosed with LTBI, and two-thirds accepted the treatment. Of all participants who started the treatment, 55% completed the treatment course. The compliance rate was high among young HCWs and physicians who had a short course of LTB treatment regimen.  Conclusion The study reported a low acceptance and completion rate of LTBI therapy among HCWs. Low knowledge about some clinical facts of LTBI, the long duration of treatment, and being the treatment optional in Saudi health institutes were all barriers to accepting and completing the treatment of LTBI. All of these factors need to be addressed to increase the compliance rate to LTBI treatment.

Real-World Evidence of COVID-19 Patients' Data Quality in the Electronic Health Records.

Despite the importance of electronic health records data, less attention has been given to data quality. This study aimed to evaluate the quality of COVID-19 patients' records and their readiness for secondary use. We conducted a retrospective chart review study of all COVID-19 inpatients in an academic healthcare hospital for the year 2020, which were identified using ICD-10 codes and case definition guidelines. COVID-19 signs and symptoms were higher in unstructured clinical notes than in structured coded data. COVID-19 cases were categorized as 218 (66.46%) "confirmed cases", 10 (3.05%) "probable cases", 9 (2.74%) "suspected cases", and 91 (27.74%) "no sufficient evidence". The identification of "probable cases" and "suspected cases" was more challenging than "confirmed cases" where laboratory confirmation was sufficient. The accuracy of the COVID-19 case identification was higher in laboratory tests than in ICD-10 codes. When validating using laboratory results, we found that ICD-10 codes were inaccurately assigned to 238 (72.56%) patients' records. "No sufficient evidence" records might indicate inaccurate and incomplete EHR data. Data quality evaluation should be incorporated to ensure patient safety and data readiness for secondary use research and predictive analytics. We encourage educational and training efforts to motivate healthcare providers regarding the importance of accurate documentation at the point-of-care.

Evaluation of Silver Nanoparticles Incorporated Acrylic Light Cure Resin Trays.

The conventional denture base resins had many drawbacks. Hence, the objective of this study was to compare the effect of incorporation of silver nanoparticles on mechanical properties of light-cured resin material. MATERIALS AND METHODS: Specimens of acrylic resin (control group) and acrylic resin reinforced with 2% silver nanoparticles (test group) were evaluated for mechanical properties such as impact strength, transverse strength, modulus of elasticity, and deflection. Unpaired t test was used for statistical analysis. RESULTS: Mechanical properties of light cure reinforced with silver nanoparticles were significantly higher than conventional light-cured resin (P < 0.05). CONCLUSION: The incorporation of silver nanoparticles into light-cured resin increases the mechanical properties making it more stronger material.

Burnout syndrome among southern region orthopedic surgeons, Saudi Arabia.

BACKGROUND: Burnout is known as result of long term exposing to stress. There are some factors that may cause stress in physicians: nature of work, their training, their public image, their families and themselves. The person who has burnout syndrome (BOS) seems like to have tiredness, low energy, nervousness, and mentally unstable. The aim of the study is to assess the pattern and magnitude of burnout among orthopedic surgeons in southern region, Saudi Arabia. METHODOLOGY: A descriptive cross-sectional survey was applied targeting all orthopedic surgeons in 12 hospitals all southern region, Saudi Arabia during the period from December 2018 to April 2019. Data were collected using self-administered questionnaire that was developed by the researchers. The questionnaire included personal data. Burnout was assessed using Maslach Burnout Inventory Scale. RESULTS: A total sample of 107 orthopedic surgeons were included with their ages ranged from 25 to 65 years old with mean age of 38.1 ± 8.9 years. About 94% of the surgeons were males and 43.9% were Saudi. Generally, the surgeons recorded mean score for emotional exhaustion of 18.9 points out of 54 with mean score% of 35.1%. Regarding depersonalization, the surgeons had mean score % of 30.7% and had a score of 39.6% for personal accomplishment. CONCLUSIONS: The study revealed that all included physicians had moderate levels of burnout. Personal accomplishment was the highest level of burnout recorded. Health education sessions and periodic training is required to improve surgeons coping strategies to overcome burnout.

Seasonal influenza vaccination among primary health care workers in Southwestern Saudi Arabia.

Background: Vaccination of primary healthcare workers (PHCWs) help to prevent the spread of influenza among at-risk patients.Objectives: To assesses seasonal influenza vaccination (SIV) coverage and the factors affecting SIV's utilization among PHCWs in Abha city, southwestern Saudi Arabia.Methods: A cross-sectional survey was carried out between June 2018 and August 2018 in all primary healthcare centers in Abha city. It targeted physicians, nurses, technicians, and pharmacists. A self-administered questionnaire was used to collect data regarding SIV status during the 2017-2018 season, obtain knowledge regarding SIV and influenza disease, and identify potential motivators for and barriers to SIV.Results: Of 312 PHCWs, the SIV coverage rate was 45.5% in the 2017-2018 vaccination season. A multivariable logistic regression model showed that the risk groups for non-vaccination were PHCWs less than 40 years old (adjusted Odds Ratio (aOR) = 4.07, 95% CI: 1.50-11.03), technicians (aOR = 3.73, 95% CI: 1.20-11.54), single PHCWs (aOR = 2.36, 95% CI:1.20-4.62), and PHCWs lacking adequate influenza vaccine knowledge (aOR = 4.22, 95% CI: 2.13-8.35). Approximately 23% and 32% of PHCWs were found to have inadequate knowledge about SIV and influenza disease, respectively. PHCWs' awareness about their risk of infection and their need for protection was found to be the most common motivator (77.5%), and a fear of side effects was found to be the most frequent barrier (40%).Conclusion: SIV coverage rate is suboptimal. Knowledge gaps and misconceptions about the influenza vaccine are the main barriers to an adequate coverage.