Alkali-activated geopolymers based on calcined phosphate sludges and metakaolin.

The extraction of phosphorite ore in Tunisia has resulted in the discharge of substantial amounts of phosphatic sludge into the region's water system. To mitigate this environmental issue and prevent heavy metal leaching, a geopolymerization process was employed using two types of Tunisian calcined phosphate sludges (Cal-PS1 and Cal-PS2) as substitutes for alkali-activated metakaolin. This study aimed to investigate and compare the physical and mechanical properties of the resulting geopolymers. The optimal substitution ratio of metakaolin with calcined phosphate sludge was determined to be 1.5, equivalent to 20 wt.% of calcined phosphate sludge. Compressive strength tests conducted after 28 days of curing revealed values of 37 MPa for Cal-PS1 specimens and 28 MPa for Cal-PS2 geopolymers while compressive strength of geopolymers soaked in water for 28 days showed a decrease with the addition of phosphate sludges. The specific surface areas of Cal-PS1 geopolymers ranged from 16.3 to 16.9 m2/g and from 17.62 to 18.73 m2/g for Cal-PS2 specimens exhibiting a mesoporous structure. The elasticity modulus of the geopolymers was found to increase with the increase of the apparent density of geopolymers and with the sludges content but it tended to be lower than the Portland cement elasticity modulus. Leaching test was conducted to evaluate the potential environmental applications of the geopolymers. This test demonstrated effective containment of heavy metals within the geopolymers' network, except for low levels of arsenic.

Mortars for Conservation of Late 19th and Early 20th Century Buildings-Combination of Natural Cements with Air Lime.

With the availability of commercial Natural cements (NC) for the conservation purposes raises a fundamental question about the compatibility between historic and repair mortars. The properties of Natural cements are dependent on the geological location of the raw material extraction and also on the production parameters, both having an impact on the final properties of the mortars produced from each distinct. Therefore, the significance of preservation of 19th and 20th century heritage and selection of the proper binder compatible with the original materials necessitate the study of existing NCs, that nowadays are produced by several manufacturers. This work provides a complex study of the mortars prepared from three NCs available in the market: Groupe Prompt Vicat, France (NCPV); Cemento Collet Marfil (NCM) and Cemento Natural Tigre (NCT), both from Spain. Various mortar sets based on individual NC containing different binder/aggregate ratios and air lime additions were analyzed after 28, 60, and 90 days of curing with the focus on their mineralogical composition (XRD), morphology (SEM), mechanical (flexural and compressive strength), and physical properties such as water absorption by capillarity, water vapor permeability, and water vapor diffusion resistance. Mortars prepared from NCPV, NCM, and NCT show distinct physical-mechanical properties with varying binder/aggregate ratio and air lime addition. This study shows that the NC variability should be taken into consideration when selecting materials for the conservation and rehabilitation of historic renders and plasters. Based on the comparison with original NC mortars, several NC mortars developed in this study show adequate properties for conservation of the buildings from late 19th and early 20th century in terms of compressive strength (>12 MPa), water absorption by capillarity (<20 kg·m−2·h−0.5), water vapor permeability (<4 × 10−10 kg·s−1·m−1·Pa−1), and water vapor diffusion resistance (<28) values.

Lipid Biomarkers in Ephemeral Acid Salt Lake Mudflat/Sandflat Sediments: Implications for Mars.

Sedimentary strata on Mars often contain a mix of sulfates, iron oxides, chlorides, and phyllosilicates, a mineral assemblage that is unique on Earth to acid brine environments. To help characterize the astrobiological potential of depositional environments with similar minerals present, samples from four naturally occurring acidic salt lakes and adjacent mudflats/sandflats in the vicinity of Norseman, Western Australia, were collected and analyzed. Lipid biomarkers were extracted and quantified, revealing biomarkers from vascular plants alongside trace microbial lipids. The resilience of lipids from dead organic material in these acid saline sediments through the pervasive stages of early diagenesis lends support to the idea that sulfates, in tandem with phyllosilicates and iron oxides, could be a viable target for biomarkers on Mars. To fully understand the astrobiological potential of these depositional environments, additional investigations of organic preservation in ancient acidic saline sedimentary environments are needed.

Recovery of Fatty Acids from Mineralogic Mars Analogs by TMAH Thermochemolysis for the Sample Analysis at Mars Wet Chemistry Experiment on the Curiosity Rover.

The Mars Curiosity rover carries a diverse instrument payload to characterize habitable environments in the sedimentary layers of Aeolis Mons. One of these instruments is Sample Analysis at Mars (SAM), which contains a mass spectrometer that is capable of detecting organic compounds via pyrolysis gas chromatography mass spectrometry (py-GC-MS). To identify polar organic molecules, the SAM instrument carries the thermochemolysis reagent tetramethylammonium hydroxide (TMAH) in methanol (hereafter referred to as TMAH). TMAH can liberate fatty acids bound in macromolecules or chemically bound monomers associated with mineral phases and make these organics detectable via gas chromatography mass spectrometry (GC-MS) by methylation. Fatty acids, a type of carboxylic acid that contains a carboxyl functional group, are of particular interest given their presence in both biotic and abiotic materials. This work represents the first analyses of a suite of Mars-analog samples using the TMAH experiment under select SAM-like conditions. Samples analyzed include iron oxyhydroxides and iron oxyhydroxysulfates, a mixture of iron oxides/oxyhydroxides and clays, iron sulfide, siliceous sinter, carbonates, and shale. The TMAH experiments produced detectable signals under SAM-like pyrolysis conditions when organics were present either at high concentrations or in geologically modern systems. Although only a few analog samples exhibited a high abundance and variety of fatty acid methyl esters (FAMEs), FAMEs were detected in the majority of analog samples tested. When utilized, the TMAH thermochemolysis experiment on SAM could be an opportunity to detect organic molecules bound in macromolecules on Mars. The detection of a FAME profile is of great astrobiological interest, as it could provide information regarding the source of martian organic material detected by SAM.