IgG subclass specificity to C1q determined by surface plasmon resonance using Protein L capture technique.

Recombinant monoclonal antibodies (mAbs) have become an important category of biological therapeutics. mAbs share the same structures and biological functions as endogenous IgG molecules. One function is complement-dependent cytotoxicity (CDC) initiation by binding of C1q. Traditionally, ELISA methods have been utilized to measure C1q binding. A new robust capture method was established in this study to measure the binding affinity of C1q to antibodies by surface plasmon resonance (SPR). The utility of this method was demonstrated by determination of the difference in IgG subclass specificity of C1q binding.

Accurate determination of protein methionine oxidation by stable isotope labeling and LC-MS analysis.

Methionine (Met) oxidation is a major modification of proteins, which converts Met to Met sulfoxide as the common product. It is challenging to determine the level of Met sulfoxide, because it can be generated during sample preparation and analysis as an artifact. To determine the level of Met sulfoxide in proteins accurately, an isotope labeling and LC-MS peptide mapping method was developed. Met residues in proteins were fully oxidized using hydrogen peroxide enriched with (18)O atoms before sample preparation. Therefore, it was impossible to generate Met sulfoxide as an artifact during sample preparation. The molecular weight difference of 2 Da between Met sulfoxide with the (16)O atom and Met sulfoxide with the (18)O atom was used to differentiate and calculate the level of Met sulfoxide in the sample originally. Using a recombinant monoclonal antibody as a model protein, much lower levels of Met sulfoxide were detected for the two susceptible Met residues with this new method compared to a typical peptide mapping procedure. The results demonstrated efficient elimination of the analytical artifact during LC-MS peptide mapping for the measurement of Met sulfoxide. This method can thus be used when accurate determination of the level of Met sulfoxide is critical.

Kinetic analysis of a monoclonal therapeutic antibody and its single-chain homolog by surface plasmon resonance.

Monoclonal antibodies (mAbs) and antibody fragments have become an emerging class of therapeutics since 1986. Their versatility enables them to be engineered for optimal efficiency and decreased immunogenicity, and the path to market has been set by recent regulatory approvals. One of the initial criteria for success of any protein or antibody therapeutic is to understand its binding characteristics to the target antigen. Surface plasmon resonance (SPR) has been widely used and is an important tool for ligand-antigen binding characterization. In this work, the binding kinetics of a recombinant mAb and its single-chain antibody homolog, single-chain variable fragment (scFv), was analyzed by SPR. These two proteins target the same antigen. The binding kinetics of the mAb (bivalent antibody) and scFv (monovalent scFv) for this antigen was analyzed along with an assessment of the thermodynamics of the binding interactions. Alternative binding configurations were investigated to evaluate potential experimental bias because theoretically experimental binding configuration should have no impact on binding kinetics. Self-association binding kinetics in the proteins' respective formulation solutions and antigen epitope mapping were also evaluated. Functional characterization of monoclonal and single-chain antibodies has become just as important as structural characterization in the biotechnology field.

A global benchmark study using affinity-based biosensors.

To explore the variability in biosensor studies, 150 participants from 20 countries were given the same protein samples and asked to determine kinetic rate constants for the interaction. We chose a protein system that was amenable to analysis using different biosensor platforms as well as by users of different expertise levels. The two proteins (a 50-kDa Fab and a 60-kDa glutathione S-transferase [GST] antigen) form a relatively high-affinity complex, so participants needed to optimize several experimental parameters, including ligand immobilization and regeneration conditions as well as analyte concentrations and injection/dissociation times. Although most participants collected binding responses that could be fit to yield kinetic parameters, the quality of a few data sets could have been improved by optimizing the assay design. Once these outliers were removed, the average reported affinity across the remaining panel of participants was 620 pM with a standard deviation of 980 pM. These results demonstrate that when this biosensor assay was designed and executed appropriately, the reported rate constants were consistent, and independent of which protein was immobilized and which biosensor was used.

Comparability and monitoring immunogenic N-linked oligosaccharides from recombinant monoclonal antibodies from two different cell lines using HPLC with fluorescence detection and mass spectrometry.

One of the most important structural features of recombinant monoclonal antibodies produced in mammalian cells is the N-linked oligosaccharide profile. These profiles impact recombinant therapeutics in a multitude of ways affecting distribution, efficacy, and immunogenicity. High mannose, alpha-gal and other oligosaccharide species are highly immunogenic and in most cases should be minimized during manufacturing. A recombinant monoclonal antibody, h5G1.1, was produced in NS0 and CHO cell lines and tested to identify changes in the N-linked oligosaccharide profiles caused from a change in cell line. Traditional peak analysis using HPLC with fluorescence detection was augmented by mass spectrometric analysis. Nano LC-MS following tryptic digestion corroborated HPLC findings of the presence of several alpha-gal oligosaccharide species in the recombinant IgG (rIgG) from NS0 cell line. Both cell lines possessed rIgGs with complex and small amounts of high mannose glycans.

Mass spectrometry and HPLC with fluorescent detection-based orthogonal approaches to characterize N-linked oligosaccharides of recombinant monoclonal antibodies.

A number of HPLC and mass spectrometric techniques are used to characterize post-translational modification in recombinant monoclonal antibodies (MAbs) using the intact glycoprotein and free glycans. LC separation utilizing fluorescent detection technique allows tentative structural assignment of MAb oligosaccharides. Intact molecular weight analysis via electrospray allows for an accurate mass determination and observation of the native glycoform mass envelope. N-linked oligosaccharides are then analyzed by MALDI-ToF. Their structures are further confirmed by analyzing the fragmentation patterns formed by MS/MS. All these techniques provide useful information when performed in isolation. However, the combined information allows for definitive and robust characterization of the N-linked glycans from recombinant MAbs.

Design and preclinical characterization of ALXN1210: A novel anti-C5 antibody with extended duration of action.

Eculizumab, a monoclonal antibody (mAb) directed against complement protein C5, is considered to be the current standard of care for patients with paroxysmal nocturnal hemoglobinuria (PNH) and atypical hemolytic uremic syndrome. This study describes the generation and preclinical attributes of ALXN1210, a new long-acting anti-C5 mAb, obtained through select modifications to eculizumab to both largely abolish target-mediated drug disposition (TMDD) and increase recycling efficiency via the neonatal Fc receptor (FcRn). To attenuate the effect of TMDD on plasma terminal half-life (t1/2), histidine substitutions were engineered into the complementarity-determining regions of eculizumab to enhance the dissociation rate of the mAb:C5 complex in the acidic early endosome relative to the slightly basic pH of blood. Antibody variants with optimal pH-dependent binding to C5 exhibited little to no TMDD in mice in the presence of human C5. To further enhance the efficiency of FcRn-mediated recycling of the antibody, two additional substitutions were introduced to increase affinity for human FcRn. These substitutions yielded an additional doubling of the t½ of surrogate anti-mouse C5 antibodies with reduced TMDD in transgenic mice expressing the human FcRn. In conclusion, ALXN1210 is a promising new therapeutic candidate currently in clinical development for treatment of patients with PNH and atypical hemolytic uremic syndrome.

Impact of IgG Fc-Oligosaccharides on Recombinant Monoclonal Antibody Structure, Stability, Safety, and Efficacy.

Glycosylation of the conserved asparagine residue in the CH2 domain is the most common posttranslational modification of recombinant monoclonal antibodies. Ideally, a consistent oligosaccharide profile should be maintained from early clinical material to commercial material for the development of recombinant monoclonal therapeutics, though variation in the profile is a typical result of process changes. The risk of oligosaccharide variation posed to further development is required to be thoroughly evaluated based on its impact on antibody structure, stability, efficacy and safety. The variation should be controlled within a range so that there is no detrimental impact on safety and efficacy and thus allowing the use of early phase safety and efficacy data to support project advancement to later phase. This review article focuses on the current scientific understanding of the commonly observed oligosaccharides found in recombinant monoclonal antibodies and their impact on structure, stability and biological functions, which are the basis to evaluate safety and efficacy. It also provides a brief discussion on critical quality attribute (CQA) assessment with regard to oligosaccharides based on the mechanism of action (MOA). © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:1173-1181, 2017.

Identification and comparative quantitation of glycation by stable isotope labeling and LC-MS.

Glycation is a common modification of proteins both in vitro and in vivo. To aid identification and comparative quantitation, a method of stable isotope labeling followed by LC-MS analysis was proposed. The samples were reduced using sodium borohydride or sodium borodeuteride. Reduction of the Schiff base between the amine group and the reducing sugars resulted in a molecular weight increase of 2Da using sodium borohydride or a molecular weight increase of 3Da using sodium borodeuteride. The molecular weight difference of 1Da between peptides containing glycated lysine residue reduced using sodium borohydride or sodium borodeuteride was used to identify glycated peptides and to calculate the glycation difference between samples. The method was used to investigate glycation of a recombinant human IgG1 antibody under native and denaturing conditions. The result demonstrated a good correlation between glycation propensity of lysine residues and their solvent exposure levels.

In vitro and in vivo modifications of recombinant and human IgG antibodies.

Tremendous knowledge has been gained in the understanding of various modifications of IgG antibodies, driven mainly by the fact that antibodies are one of the most important groups of therapeutic molecules and because of the development of advanced analytical techniques. Recombinant monoclonal antibody (mAb) therapeutics expressed in mammalian cell lines and endogenous IgG molecules secreted by B cells in the human body share some modifications, but each have some unique modifications. Modifications that are common to recombinant mAb and endogenous IgG molecules are considered to pose a lower risk of immunogenicity. On the other hand, modifications that are unique to recombinant mAbs could potentially pose higher risk. The focus of this review is the comparison of frequently observed modifications of recombinant monoclonal antibodies to those of endogenous IgG molecules.