Bidentate Substrate Binding Mode in Oxalate Decarboxylase.

Oxalate decarboxylase is an Mn- and O2-dependent enzyme in the bicupin superfamily that catalyzes the redox-neutral disproportionation of the oxalate monoanion to form carbon dioxide and formate. Its best-studied isozyme is from Bacillus subtilis where it is stress-induced under low pH conditions. Current mechanistic schemes assume a monodentate binding mode of the substrate to the N-terminal active site Mn ion to make space for a presumed O2 molecule, despite the fact that oxalate generally prefers to bind bidentate to Mn. We report on X-band 13C-electron nuclear double resonance (ENDOR) experiments on 13C-labeled oxalate bound to the active-site Mn(II) in wild-type oxalate decarboxylase at high pH, the catalytically impaired W96F mutant enzyme at low pH, and Mn(II) in aqueous solution. The ENDOR spectra of these samples are practically identical, which shows that the substrate binds bidentate (κO, κO') to the active site Mn(II) ion. Domain-based local pair natural orbital coupled cluster singles and doubles (DLPNO-CCSD) calculations of the expected 13C hyperfine coupling constants for bidentate bound oxalate predict ENDOR spectra in good agreement with the experiment, supporting bidentate bound substrate. Geometry optimization of a substrate-bound minimal active site model by density functional theory shows two possible substrate coordination geometries, bidentate and monodentate. The bidentate structure is energetically preferred by ~4.7 kcal/mol. Our results revise a long-standing hypothesis regarding substrate binding in the enzyme and suggest that dioxygen does not bind to the active site Mn ion after substrate binds. The results are in agreement with our recent mechanistic hypothesis of substrate activation via a long-range electron transfer process involving the C-terminal Mn ion.

Coaxially Conductive Organic Wires Through Self-Assembly.

Here, we describe the synthesis of the hexameric macrocyclic aniline (MA[6]), which spontaneously assembles into coaxially conductive organic wires in its oxidized and acidified emeraldine salt (ES) form. Electrical measurements reveal that ES-MA[6] exhibits high electrical conductivity (7.5 × 10-2 S·cm-1) and that this conductivity is acid-base responsive. Single-crystal X-ray crystallography reveals that ES-MA[6] assembles into well-defined trimeric units that then stack into nanotubes with regular channels, providing a potential route to synthetic nanotubes that are leveraged for ion or small molecule transport. Ultraviolet-visible-near-infrared absorbance spectroscopy and electron paramagnetic spectroscopy showcase the interconversion between acidic (conductive) and basic (insulating) forms of these macrocycles and how charge carriers are formed through protonation, giving rise to the experimentally observed high electrical conductivity.

Oxalate decarboxylase uses electron hole hopping for catalysis.

The hexameric low-pH stress response enzyme oxalate decarboxylase catalyzes the decarboxylation of the oxalate mono-anion in the soil bacterium Bacillus subtilis. A single protein subunit contains two Mn-binding cupin domains, and catalysis depends on Mn(III) at the N-terminal site. The present study suggests a mechanistic function for the C-terminal Mn as an electron hole donor for the N-terminal Mn. The resulting spatial separation of the radical intermediates directs the chemistry toward decarboxylation of the substrate. A π-stacked tryptophan pair (W96/W274) links two neighboring protein subunits together, thus reducing the Mn-to-Mn distance from 25.9 Å (intrasubunit) to 21.5 Å (intersubunit). Here, we used theoretical analysis of electron hole-hopping paths through redox-active sites in the enzyme combined with site-directed mutagenesis and X-ray crystallography to demonstrate that this tryptophan pair supports effective electron hole hopping between the C-terminal Mn of one subunit and the N-terminal Mn of the other subunit through two short hops of ∼8.5 Å. Replacement of W96, W274, or both with phenylalanine led to a large reduction in catalytic efficiency, whereas replacement with tyrosine led to recovery of most of this activity. W96F and W96Y mutants share the wildtype tertiary structure. Two additional hole-hopping networks were identified leading from the Mn ions to the protein surface, potentially protecting the enzyme from high Mn oxidation states during turnover. Our findings strongly suggest that multistep hole-hopping transport between the two Mn ions is required for enzymatic function, adding to the growing examples of proteins that employ aromatic residues as hopping stations.

Epoxyqueuosine Reductase QueH in the Biosynthetic Pathway to tRNA Queuosine Is a Unique Metalloenzyme.

Queuosine is a structurally unique and functionally important tRNA modification, widely distributed in eukaryotes and bacteria. The final step of queuosine biosynthesis is the reduction/deoxygenation of epoxyqueuosine to form the cyclopentene motif of the nucleobase. The chemistry is performed by the structurally and functionally characterized cobalamin-dependent QueG. However, the queG gene is absent from several bacteria that otherwise retain queuosine biosynthesis machinery. Members of the IPR003828 family (previously known as DUF208) have been recently identified as nonorthologous replacements of QueG, and this family was renamed QueH. Here, we present the structural characterization of QueH from Thermotoga maritima. The structure reveals an unusual active site architecture with a [4Fe-4S] metallocluster along with an adjacent coordinated iron metal. The juxtaposition of the cofactor and coordinated metal ion predicts a unique mechanism for a two-electron reduction/deoxygenation of epoxyqueuosine. To support the structural characterization, in vitro biochemical and genomic analyses are presented. Overall, this work reveals new diversity in the chemistry of iron/sulfur-dependent enzymes and novel insight into the last step of this widely conserved tRNA modification.

Expansion of the Family of Molecular Nanoparticles of Cerium Dioxide and Their Catalytic Scavenging of Hydroxyl Radicals.

The syntheses, crystal structures, and catalytic radical scavenging activity are reported for four new molecular clusters that have resulted from a bottom-up molecular approach to nanoscale CeO2. They are [Ce6O4(OH)4(dmb)12(H2O)4] (dmb- = 2,6-dimethoxybenzoate), [Ce16O17(OH)6(O2CPh)24(HO2CPh)4], [Ce19O18(OH)9(O2CPh)27(H2O)(py)3], and [Ce24O27(OH)9(O2CPh)30(py)4]. They represent a major expansion of our family of so-called "molecular nanoparticles" of this metal oxide to seven members, and their crystal structures confirm that their cores all possess the fluorite structure of bulk CeO2. In addition, they have allowed the identification of surface features such as the close location of multiple Ce3+ ions and organic ligand binding modes not seen previously. The ability of all seven members to catalytically scavenge reactive oxygen species has been investigated using HO• radicals, an important test reaction in the ceria nanoparticle biomedical literature, and most have been found to exhibit excellent antioxidant activities compared to traditional ceria nanoparticles, with their activity correlating inversely with their surface Ce3+ content.

Manipulating Atomic Structures at the Au/TiO2 Interface for O2 Activation.

The metal/oxide interface has been extensively studied due to its importance for heterogeneous catalysis. However, the exact role of interfacial atomic structures in governing catalytic processes still remains elusive. Herein, we demonstrate how the manipulation of atomic structures at the Au/TiO2 interface significantly alters the interfacial electron distribution and prompts O2 activation. It is discovered that at the defect-free Au/TiO2 interface electrons transfer from Ti3+ species into Au nanoparticles (NPs) and further migrate into adsorbed perimeter O2 molecules (i.e., in the form of Au-O-O-Ti), facilitating O2 activation and leading to a ca. 34 times higher CO oxidation activity than that on the oxygen vacancy (Vo)-rich Au/TiO2 interface, at which electrons from Ti3+ species are trapped by interfacial Vo on TiO2 and hardly interact with perimeter O2 molecules. We further reveal that the calcination releases those trapped electrons from interfacial Vo to facilitate O2 activation. Collectively, our results establish an atomic-level description of the underlying mechanism regulating metal/oxide interfaces for the optimization of heterogeneous catalysis.

Chemical and Metagenomic Studies of the Lethal Black Band Disease of Corals Reveal Two Broadly Distributed, Redox-Sensitive Mixed Polyketide/Peptide Macrocycles.

Black band disease (BBD), a lethal, polymicrobial disease consortium dominated by the cyanobacterium Roseofilum reptotaenium, kills many species of corals worldwide. To uncover chemical signals or cytotoxins that could be important in proliferation of Roseofilum and the BBD layer, we examined the secondary metabolites present in geographically diverse collections of BBD from Caribbean and Pacific coral reefs. Looekeyolide A (1), a 20-membered macrocyclic compound formed by a 16-carbon polyketide chain, 2-deamino-2-hydroxymethionine, and d-leucine, and its autoxidation product looekeyolide B (2) were extracted as major compounds (∼1 mg g-1 dry wt) from more than a dozen field-collected BBD samples. Looekeyolides A and B were also produced by a nonaxenic R. reptotaenium culture under laboratory conditions at similar concentrations. R. reptotaenium genomes that were constructed from four different metagenomic data sets contained a unique nonribosomal peptide/polyketide biosynthetic cluster that is likely responsible for the biosynthesis of the looekeyolides. Looekeyolide A, which readily oxidizes to looekeyolide B, may play a biological role in reducing H2O2 and other reactive oxygen species that could occur in the BBD layer as it overgrows and destroys coral tissue.

Structural, Spectroscopic, Electrochemical, and Magnetic Properties for Manganese(II) Triazamacrocyclic Complexes.

We report the synthesis of [Mn(tacud)2](OTf)2 (1) (tacud = 1,4,8-triazacycloundecane), [Mn(tacd)2](OTf)2 (2) (tacd = 1,4,7-triazacyclodecane), and [Mn(tacn)2](OTf)2 (3) (tacn = 1,4,7-triazacyclononane). Electrochemical measurements on the MnIII/II redox couple show that complex 1 has the largest anodic potential of the set (E 1/2 = 1.16 V vs NHE, ΔE p = 106 mV) compared to 2 (E 1/2 = 0.95 V, ΔE p = 108 mV) and 3 (E 1/2 = 0.93 V, ΔE p = 96 mV). This is due to the fact that 1 has the fewest 5-membered chelate rings and thus is least stabilized. Magnetic studies of 1-3 revealed that all complexes remain high spin throughout the temperature range investigated (2 - 300 K). X-band EPR investigations in methanol glass indicated that the manganese(II) centers for 2 and 3 resided in a more distorted octahedral geometric configuration compared to 1. To ease spectral interpretation and extract ZFS parameters, we performed high-frequency high-field EPR (HFEPR) at frequencies above 200 GHz and a field of 7.5 T. Simulation of the spectral data yielded g = 2.0013 and D = -0.031 cm-1 for 1, g = 2.0008, D = -0.0824 cm-1, |E/D| = 0.12 for 2, and g = 2.00028, D = -0.0884 cm-1 for 3. These results are consistent with 3 possessing the most distorted geometry. Calculations (PBE0/6-31G(d)) were performed on 1-3. Results show that 1 has the largest HOMO-LUMO gap energy (6.37 eV) compared to 2 (6.12 eV) and 3 (6.26 eV). Complex 1 also has the lowest HOMO energies indicating higher stability.

Plasmonic Nickel-TiO2 Heterostructures for Visible-Light-Driven Photochemical Reactions.

Plasmon-mediated carrier transfer (PMCT) at metal-semiconductor heterojunctions has been extensively exploited to drive photochemical reactions, offering intriguing opportunities for solar photocatalysis. However, to date, most studies have been conducted using noble metals. Inexpensive materials capable of generating and transferring hot carriers for photocatalysis via PMCT have been rarely explored. Here, we demonstrate that the plasmon excitation of nickel induces the transfer of both hot electrons and holes from Ni to TiO2 in a rationally designed Ni-TiO2 heterostructure. Furthermore, it is discovered that the transferred hot electrons either occupy oxygen vacancies (VO ) or produce Ti3+ on TiO2 , while the transferred hot holes are located on surface oxygens at TiO2 . Moreover, the transferred hot electrons are identified to play a primary role in driving the degradation of methylene blue (MB). Taken together, our results validate Ni as a promising low-cost plasmonic material for prompting visible-light photochemical reactions.

Redox Cycling, pH Dependence, and Ligand Effects of Mn(III) in Oxalate Decarboxylase from Bacillus subtilis.

This contribution describes electron paramagnetic resonance (EPR) experiments on Mn(III) in oxalate decarboxylase of Bacillus subtilis, an interesting enzyme that catalyzes the redox-neutral dissociation of oxalate into formate and carbon dioxide. Chemical redox cycling provides strong evidence that both Mn centers can be oxidized, although the N-terminal Mn(II) appears to have the lower reduction potential and is most likely the carrier of the +3 oxidation state under moderate oxidative conditions, in agreement with the general view that it represents the active site. Significantly, Mn(III) was observed in untreated OxDC in succinate and acetate buffers, while it could not be directly observed in citrate buffer. Quantitative analysis showed that up to 16% of the EPR-visible Mn is in the +3 oxidation state at low pH in the presence of succinate buffer. The fine structure and hyperfine structure parameters of Mn(III) are affected by small carboxylate ligands that can enter the active site and have been recorded for formate, acetate, and succinate. The results from a previous report [Zhu, W., et al. (2016) Biochemistry 55, 429-434] could therefore be reinterpreted as evidence of formate-bound Mn(III) after the enzyme is allowed to turn over oxalate. The pH dependence of the Mn(III) EPR signal compares very well with that of enzymatic activity, providing strong evidence that the catalytic reaction of oxalate decarboxylase is driven by Mn(III), which is generated in the presence of dioxygen.

Assigning the EPR fine structure parameters of the Mn(II) centers in Bacillus subtilis oxalate decarboxylase by site-directed mutagenesis and DFT/MM calculations.

Oxalate decarboxylase (OxDC) catalyzes the Mn-dependent conversion of the oxalate monoanion into CO2 and formate. EPR-based strategies for investigating the catalytic mechanism of decarboxylation are complicated by the difficulty of assigning the signals associated with the two Mn(II) centers located in the N- and C-terminal cupin domains of the enzyme. We now report a mutational strategy that has established the assignment of EPR fine structure parameters to each of these Mn(II) centers at pH 8.5. These experimental findings are also used to assess the performance of a multistep strategy for calculating the zero-field splitting parameters of protein-bound Mn(II) ions. Despite the known sensitivity of calculated D and E values to the computational approach, we demonstrate that good estimates of these parameters can be obtained using cluster models taken from carefully optimized DFT/MM structures. Overall, our results provide new insights into the strengths and limitations of theoretical methods for understanding electronic properties of protein-bound Mn(II) ions, thereby setting the stage for future EPR studies on the electronic properties of the Mn(II) centers in OxDC and site-specific variants.

Heterobimetallic complexes of polypyridyl ligands containing paramagnetic centers: synthesis and characterization by IR and EPR.

Ligands containing linked dipicolylamine (dpa) and bipyridine sites have been explored as platforms for the synthesis of heterometallic complexes containing the paramagnetic metals Cu(2+) and Co(2+). IR and EPR studies on the bimetallic complexes and simplified model compounds support dpa-selective binding by both of these metals. The IR spectra have also been compared to those of diamagnetic Rh(+), Zn(2+), and Pd(2+) complexes whose metal binding sites had been independently determined through NMR techniques. The binding preferences have been used to control selective metalation in the synthesis of heterometallic Pt/Cu, Pd/Cu, and Rh/Cu complexes.

Selective incorporation of 5-hydroxytryptophan blocks long range electron transfer in oxalate decarboxylase.

Oxalate decarboxylase from Bacillus subtilis is a binuclear Mn-dependent acid stress response enzyme that converts the mono-anion of oxalic acid into formate and carbon dioxide in a redox neutral unimolecular disproportionation reaction. A π-stacked tryptophan dimer, W96 and W274, at the interface between two monomer subunits facilitates long-range electron transfer between the two Mn ions and plays an important role in the catalytic mechanism. Substitution of W96 with the unnatural amino acid 5-hydroxytryptophan leads to a persistent EPR signal which can be traced back to the neutral radical of 5-hydroxytryptophan with its hydroxyl proton removed. 5-Hydroxytryptophan acts as a hole sink preventing the formation of Mn(III) at the N-terminal active site and strongly suppresses enzymatic activity. The lower boundary of the standard reduction potential for the active site Mn(II)/Mn(III) couple can therefore be estimated as 740 mV against the normal hydrogen electrode at pH 4, the pH of maximum catalytic efficiency. Our results support the catalytic importance of long-range electron transfer in oxalate decarboxylase while at the same time highlighting the utility of unnatural amino acid incorporation and specifically the use of 5-hydroxytryptophan as an energetic sink for hole hopping to probe electron transfer in redox proteins.

Elucidating the Origin of Plasmon-Generated Hot Holes in Water Oxidation.

Plasmon-generated hot electrons in metal/oxide heterostructures have been used extensively for driving photochemistry. However, little is known about the origin of plasmon-generated hot holes in promoting photochemical reactions. Herein, we discover that, during the nonradiative plasmon decay, the interband excitation rather than the intraband excitation generates energetic hot holes that enable to drive the water oxidation at the Au/TiO2 interface. Distinct from lukewarm holes via the intraband excitation that only remain on Au, hot holes from the interband excitation are found to be transferred from Au into TiO2 and stabilized by surface oxygen atoms on TiO2, making them available to oxidize adsorbed water molecules. Taken together, our studies provide spectroscopic evidence to clarify the photophysical process for exciting plasmon-generated hot holes, unravel their atomic-level accumulation sites to maintain the strong oxidizing power in metal/oxide heterostructures, and affirm their crucial functions in governing photocatalytic oxidation reactions.

A structural element that facilitates proton-coupled electron transfer in oxalate decarboxylase.

The conformational properties of an active-site loop segment, defined by residues Ser(161)-Glu(162)-Asn(163)-Ser(164), have been shown to be important for modulating the intrinsic reactivity of Mn(II) in the active site of Bacillus subtilis oxalate decarboxylase. We now detail the functional and structural consequences of removing a conserved Arg/Thr hydrogen-bonding interaction by site-specific mutagenesis. Hence, substitution of Thr-165 by a valine residue gives an OxDC variant (T165V) that exhibits impaired catalytic activity. Heavy-atom isotope effect measurements, in combination with the X-ray crystal structure of the T165V OxDC variant, demonstrate that the conserved Arg/Thr hydrogen bond is important for correctly locating the side chain of Glu-162, which mediates a proton-coupled electron transfer (PCET) step prior to decarboxylation in the catalytically competent form of OxDC. In addition, we show that the T165V OxDC variant exhibits a lower level of oxalate consumption per dioxygen molecule, consistent with the predictions of recent spin-trapping experiments [Imaram et al. (2011) Free Radicals Biol. Med. 50, 1009-1015]. This finding implies that dioxygen might participate as a reversible electron sink in two putative PCET steps and is not merely used to generate a protein-based radical or oxidized metal center.

Enhanced archaeal laccase production in recombinant Escherichia coli by modification of N-terminal propeptide and twin arginine translocation motifs.

Laccases are multicopper oxidases that couple the oxidation of phenolic polymers to the reduction of molecular oxygen. While an archaeal laccase has only recently been described (LccA from the culture broth of Haloferax volcanii), this enzyme appears promising for biotechnology applications based on its robust bilirubin oxidase and laccase activities as well as its ability to withstand prolonged exposure to extreme conditions. To further optimize LccA productivity and develop an option for LccA purification from whole cells, the encoding gene was modified through deletion of the twin-arginine translocation motif and N-terminal propeptide, and the modified genes were expressed in Escherichia coli. With this approach, LccA was readily purified (overall yield up to 54 %) from the soluble fraction of E. coli as a 74-kDa monomer with syringaldazine oxidizing activity as high as 33 U mg(-1). LccA proteins prepared from H. volcanii culture broth and the soluble fraction of E. coli cells were compared by ICP-AES, EPR, DSC, CD, and UV-Vis spectroscopy and found to have a similar folding pattern with T (m) values and a rich ß-sheet structure analogous to other multicopper oxidases. However, in contrast to the H. volcanii-purified LccA, which was loaded with copper, copper was not fully incorporated into the type-I Cu center of E. coli purified LccA, thus, providing insight into avenues for further optimization.

The absence of the queuosine tRNA modification leads to pleiotropic phenotypes revealing perturbations of metal and oxidative stress homeostasis in Escherichia coli K12.

Queuosine (Q) is a conserved hypermodification of the wobble base of tRNA containing GUN anticodons but the physiological consequences of Q deficiency are poorly understood in bacteria. This work combines transcriptomic, proteomic and physiological studies to characterize a Q-deficient Escherichia coli K12 MG1655 mutant. The absence of Q led to an increased resistance to nickel and cobalt, and to an increased sensitivity to cadmium, compared to the wild-type (WT) strain. Transcriptomic analysis of the WT and Q-deficient strains, grown in the presence and absence of nickel, revealed that the nickel transporter genes (nikABCDE) are downregulated in the Q- mutant, even when nickel is not added. This mutant is therefore primed to resist to high nickel levels. Downstream analysis of the transcriptomic data suggested that the absence of Q triggers an atypical oxidative stress response, confirmed by the detection of slightly elevated reactive oxygen species (ROS) levels in the mutant, increased sensitivity to hydrogen peroxide and paraquat, and a subtle growth phenotype in a strain prone to accumulation of ROS.

Characterization of Ceriporiopsis subvermispora bicupin oxalate oxidase expressed in Pichia pastoris.

Oxalate oxidase (E.C. 1.2.3.4) catalyzes the oxygen-dependent oxidation of oxalate to carbon dioxide in a reaction that is coupled with the formation of hydrogen peroxide. Although there is currently no structural information available for oxalate oxidase from Ceriporiopsis subvermispora (CsOxOx), sequence data and homology modeling indicate that it is the first manganese-containing bicupin enzyme identified that catalyzes this reaction. Interestingly, CsOxOx shares greatest sequence homology with bicupin microbial oxalate decarboxylases (OxDC). We show that CsOxOx activity directly correlates with Mn content and other metals do not appear to be able to support catalysis. EPR spectra indicate that the Mn is present as Mn(II), and are consistent with the coordination environment expected from homology modeling with known X-ray crystal structures of OxDC from Bacillus subtilis. EPR spin-trapping experiments support the existence of an oxalate-derived radical species formed during turnover. Acetate and a number of other small molecule carboxylic acids are competitive inhibitors for oxalate in the CsOxOx catalyzed reaction. The pH dependence of this reaction suggests that the dominant contribution to catalysis comes from the monoprotonated form of oxalate binding to a form of the enzyme in which an active site carboxylic acid residue must be unprotonated.