RESUMO
In this work, we present a high-pulse-energy multi-wavelength Raman laser spanning from 1.53 µm up to 2.4 µm by employing the cascaded rotational stimulated Raman scattering effect in a 5 m hydrogen (H2)-filled nested anti-resonant fiber, pumped by a linearly polarized Er/Yb fiber laser with a peak power of â¼13kW and pulse duration of â¼7ns in the C-band. The developed Raman laser has distinct lines at 1683 nm, 1868 nm, 2100 nm, and 2400 nm, with pulse energies as high as 18.25 µJ, 14.4 µJ, 14.1 µJ, and 8.2 µJ, respectively. We demonstrate how the energy in the Raman lines can be controlled by tuning the H2 pressure from 1 bar to 20 bar.
RESUMO
In this Letter, we demonstrate a high pulse energy and linearly polarized mid-infrared Raman fiber laser targeting the strongest absorption line of ${\rm CO}_2$CO2 at $\sim{4.2}\;\unicode {x00B5} {\rm m}$â¼4.2µm. This laser was generated from a hydrogen (${\rm H}_2$H2)-filled antiresonant hollow-core fiber, pumped by a custom-made 1532.8 nm Er-doped fiber laser delivering 6.9 ns pulses and 11.6 kW peak power. A quantum efficiency as high as 74% was achieved, to yield 17.6 µJ pulse energy at 4.22 µm. Less than 20 bar ${\rm H}_2$H2 pressure was required to maximize the pulse energy since the transient Raman regime was efficiently suppressed by the long pump pulses.
RESUMO
We experimentally conduct Brillouin dynamic grating (BDG) operation using a 1-km-long four-mode fiber. By employing a simplified ring-cavity configuration with single-end pumping, the BDG is effectively generated in $ {{\rm LP}_{01}} $LP01 mode within a range of 250 m, and three higher-order modes, namely, $ {{\rm LP}_{11b}} $LP11b, $ {{\rm LP}_{21a}} $LP21a, and $ {{\rm LP}_{02}} $LP02, are chosen as probes to analyze the BDG with a spatial resolution of 1 m. To the best of our knowledge, this is the first time to characterize the responses of BDG frequency to temperature and strain for different modes in a conventional few-mode fiber. By employing the pump-probe pair of $ {{\rm LP}_{01}}{{\rm - LP}_{02}} $LP01-LP02 mode, the highest temperature and strain sensitivities of 3.21 MHz/°C and $ - 0.0384\;{\rm MHz}/{\unicode{x00B5}}{\unicode{x03B5}} $-0.0384MHz/µÎµ have been achieved. Also, the performance of simultaneously distributed temperature and strain sensing based on BDG is evaluated.
RESUMO
Mode-selective fiber lasers have advantages in a number of applications. Here we propose and experimentally demonstrate a transverse mode-selective few-mode Brillouin fiber laser using the mode-selective photonic lantern. We generated the lowest three orders of linearly polarized (LP) modes based on both intramodal and intermodal stimulated Brillouin scattering (SBS). Their slope efficiencies, optical spectra, mode profiles, and linewidths were measured.
RESUMO
In this paper, we numerically investigate various hollow-core anti-resonant (HC-AR) fibers towards low propagation and bend loss with effectively single-mode operation in the telecommunications window. We demonstrate how the propagation loss and higher-order mode modal contents are strongly influenced by the geometrical structure and the number of the anti-resonant cladding tubes. We found that 5-tube nested HC-AR fiber has a wider anti-resonant band, lower loss, and larger higher-order mode extinction ratio than designs with 6 or more anti-resonant tubes. A loss ratio between the higher-order modes and fundamental mode, as high as 12,000, is obtained in a 5-tube nested HC-AR fiber. To the best of our knowledge, this is the largest higher-order mode extinction ratio demonstrated in a hollow-core fiber at 1.55 µm. In addition, we propose a modified 5-tube nested HC-AR fiber, with propagation loss below 1 dB/km from 1330 to 1660 nm. This fiber also has a small bend loss of ~15 dB/km for a bend radius of 1 cm.
RESUMO
Few-mode EDFAs with low channel crosstalk can replace multiple parallel single-mode EDFAs in single-mode fiber trunk lines and networks. Here we proposed a low-crosstalk few-mode EDFA by exploiting the unitary property of the coupling matrix of a symmetric photonic lantern. We experimentally demonstrated a 3-channel few-mode EDFA using retro-reflection of a 3-mode symmetric photonic lantern. The small signal gain for all three channels are measured to be larger than 25 dB over the entire C-band and the crosstalks are below -10 dB.
RESUMO
Broadband supercontinuum generation is numerically investigated in a Xe-filled nested hollow-core antiresonant (HC-AR) fiber pumped at 3 µm with pulses of 100 fs duration and 15 µJ energy. For a 25 cm long fiber, under 7 bar pressure, the supercontinuum spectrum spans multiple octaves from 400 nm to 5000 nm. Furthermore, the influence of bending on ultrafast nonlinear pulse propagation dynamics is investigated for two types of HC-AR fibers (nested and non-nested capillaries). Our results predict similar nonlinear dynamics for both fiber types and a significant reduction of the spectral broadening under tight bending conditions.
RESUMO
The emergence of space division multiplexing (SDM) for ultrahigh capacity networks has heralded pioneering Petabit-class optical transmission systems. In parallel to novel SDM fibers, a new class of components to enable scalable, low-loss schemes for unlocking fiber capacity is being developed. In this work, an all-fiber mode selective photonic lantern mode multiplexer designed for launching into few-mode multicore fibers is demonstrated. This device is capable of selectively exciting LP01, LP11a and LP11b modes in a seven-core configuration, resulting in 21 spatial channels, with less than 38 dB core-to-core crosstalk and insertion loss below 0.4 dB. The multicore photonic lantern multiplexer is scalable to larger number of cores and modes per core, and can be easily integrated with emerging ultra-high bandwidth few-mode multicore optical communication systems.
RESUMO
We present a novel design of a micro-structured large-pitch, large-mode-area (LMA) asymmetric rod-type fiber. By reducing the cladding symmetry through six high-refractive index germanium-doped silica inclusions, the fiber features strong higher-order mode (HOM) delocalization, leading to a potentially enhanced preferential gain for the fundamental mode in active fibers. In addition, high resolution spatially and spectrally (S2) resolved mode analysis measurements confirm HOM contributions below 1% and LP1m-like HOM contributions below the detection limit. This proposed fiber design enables single-mode operation, with near-diffraction-limited beam quality of M2=1.3 and an effective mode area of 2560 µm2 at 1064 nm. This design opens new insights into improving the threshold-like onset of modal instabilities in high-power fiber lasers and fiber amplifiers by efficiently suppressing LP11 modes.
RESUMO
We show that germanium-doped graded-index multimode silica fibers can exhibit relatively high conversion efficiencies (â¼6.5%) for second-harmonic generation when excited at 1064 nm. This frequency-doubling behavior is also found to be accompanied by an effective downconversion. As opposed to previous experiments carried out in single- and few-mode fibers where hours of preparation were required, in our system, these χ(2) related processes occur almost instantaneously. The efficiencies observed in our experiments are, to the best of our knowledge, among the highest ever reported in unprepared fibers.
RESUMO
We demonstrate that frequency generation in multimode parabolic-index fibers can be precisely engineered through appropriate fiber design. This is accomplished by exploiting the onset of a geometric parametric instability that arises from resonant spatiotemporal compression. By launching the output of an amplified Q-switched microchip laser delivering 400 ps pulses at 1064 nm, we observe a series of intense frequency sidebands that strongly depend on the fiber core size. The nonlinear frequency generation is analyzed in three fiber samples with 50 µm, 60 µm, and 80 µm core diameters. We further demonstrate that by cascading fibers of different core sizes, a desired frequency band can be generated from the frequency lines parametrically produced in each section. The observed frequency shifts are in good agreement with analytical predictions and numerical simulations. Our results suggest that core scaling and fiber concatenation can provide a viable avenue in designing optical sources with tailored output frequencies.
RESUMO
We analyze the higher-order core mode content in various designs of antiresonant hollow core fibers using spatially and spectrally resolved imaging. Hollow core fibers have great potential for a variety of applications, and understanding their mode content is crucial for many of these. Two different designs of hollow core fibers are considered, the first with eight nontouching rings and the second with eight touching rings forming a closed boundary core. The mode content of each fiber is measured as a function of length and bending diameter. Low amounts of higher-order modes were found in both hollow core fibers, and mode specific and bending-dependent losses have been determined. This study aids in understanding the core modes of hollow core fibers and possible methods of controlling them.
RESUMO
We demonstrate a few-mode erbium-doped fiber amplifier employing a mode-selective photonic lantern for controlling the modal content of the pump light. Amplification of six spatial modes in a 5 m long erbium-doped fiber to â¼6.2 dBm average power is obtained while maintaining high modal fidelity. Through mode-selective forward pumping of the two degenerate LP21 modes operating at 976 nm, differential modal gains of <1 dB between all modes and signal gains of â¼16 dB at 1550 nm are achieved. In addition, low differential modal gain for near-full C-band operation is demonstrated.
RESUMO
A compact, low loss, and highly sensitive optical fiber curvature sensor is presented. The device consists of a few-millimeter-long piece of seven-core fiber spliced between two single-mode fibers. When the optical fiber device is kept straight, a pronounced interference pattern appears in the transmission spectrum. However, when the device is bent, a spectral shift of the interference pattern is produced, and the visibility of the interference notches changes. This allows for using either visibility or spectral shift for sensor interrogation. The dynamic range of the device can be tailored through the proper selection of the length of the seven-core fiber. The effects of temperature and refractive index of the external medium on the response of the curvature sensor are also discussed. Linear sensitivity of about 3000 nm/mm(-1) for bending was observed experimentally.
RESUMO
A bending sensor is demonstrated using the combination of a mode-selective photonic lantern (PL) and a multicore fiber. A short section of three-core fiber with strongly coupled cores is used as the bend sensitive element. The supermodes of this fiber are highly sensitive to the refractive index profiles of the cores. Small bend-induced changes result in drastic changes of the supermodes, their excitation, and interference. The multicore fiber is spliced to a few-mode fiber and excites bend dependent amounts of each of the six linearly polarized (LP) modes guided in the few-mode fiber. A mode selective PL is then used to demultiplex the modes of the few-mode fiber. Relative power measurements at the single-mode PL output ports reveal a high sensitivity to bending curvature and differential power distributions according to bending direction, without the need for spectral measurements. High direction sensitivity is demonstrated experimentally as well as in numerical simulations. Relative power shifts of up to 80% have been measured at radii of approximately 20 cm, and good sensitivity was observed with radii as large as 10 m, making this sensing system useful for applications requiring both large and small curvature measurements.
RESUMO
Low-loss all-fiber photonic lantern (PL) mode multiplexers (MUXs) capable of selectively exciting the first six fiber modes of a multimode fiber (LP01, LP11a, LP11b, LP21a, LP21b, and LP02) are demonstrated. Fabrication of the spatial mode multiplexers was successfully achieved employing a combination of either six step or six graded index fibers of four different core sizes. Insertion losses of 0.2-0.3 dB and mode purities above 9 dB are achieved. Moreover, it is demonstrated that the use of graded index fibers in a PL eases the length requirements of the adiabatic tapered transition and could enable scaling to large numbers.
RESUMO
A novel (to the best of our knowledge) liquid level sensor based on multimode interference (MMI) effects is proposed and demonstrated. By using a multimode fiber (MMF) without cladding, known as no-core fiber, liquids around the MMF modify the self-imaging properties of the MMI device and the liquid level can be detected. We show that the sensor exhibits a highly linear response with the sensing range and multiplexed operations easily controlled by just modifying the length of the no-core fiber. At the same time, we can measure the refractive index of the liquid based on the maximum peak wavelength shift. We can also use the sensor for continuous and discrete liquid level sensing applications, thus providing a liquid level sensor that is inexpensive with a very simple fabrication process.
RESUMO
Development of novel mid-infrared (MIR) lasers could ultimately boost emerging detection technologies towards innovative spectroscopic and imaging solutions. Photoacoustic (PA) modality has been heralded for years as one of the most powerful detection tools enabling high signal-to-noise ratio analysis. Here, we demonstrate a novel, compact and sensitive MIR-PA system for carbon dioxide (CO2) monitoring at its strongest absorption band by combining a gas-filled fiber laser and PA technology. Specifically, the PA signals were excited by a custom-made hydrogen (H2) based MIR Raman fiber laser source with a pulse energy of â 18 µJ, quantum efficiency of â 80% and peak power of â 3.9 kW. A CO2 detection limit of 605 ppbv was attained from the Allan deviation. This work constitutes an alternative method for advanced high-sensitivity gas detection.
RESUMO
Bright, coherent soft X-ray radiation is essential to a variety of applications in fundamental research and life sciences. To date, a high photon flux in this spectral region can only be delivered by synchrotrons, free-electron lasers or high-order harmonic generation sources, which are driven by kHz-class repetition rate lasers with very high peak powers. Here, we establish a novel route toward powerful and easy-to-use SXR sources by presenting a compact experiment in which nonlinear pulse self-compression to the few-cycle regime is combined with phase-matched high-order harmonic generation in a single, helium-filled antiresonant hollow-core fibre. This enables the first 100 kHz-class repetition rate, table-top soft X-ray source that delivers an application-relevant flux of 2.8 × 106 photon s-1 eV-1 around 300 eV. The fibre integration of temporal pulse self-compression (leading to the formation of the necessary strong-field waveforms) and pressure-controlled phase matching will allow compact, high-repetition-rate laser technology, including commercially available systems, to drive simple and cost-effective, coherent high-flux soft X-ray sources.
RESUMO
A widely tunable erbium-doped all-fiber laser has been demonstrated. The tunable mechanism is based on a novel tunable filter using multimode interference effects (MMI). The tunable MMI filter was applied to fabricate a tunable erbium-doped fiber laser via a standard ring cavity. A tuning range of 60 nm was obtained, ranging from 1549 nm to 1609 nm, with a signal to noise ratio of 40 dB. The tunable MMI filter mechanism is very simple and inexpensive, but also quite efficient as a wavelength tunable filter.