Synergy between Experimental and Computational Chemistry Reveals the Mechanism of Decomposition of Nickel-Ketene Complexes.

A series of (dppf)Ni(ketene) complexes were synthesized and fully characterized. In the solid state, the complexes possess η2-(C,O) coordination of the ketene in an overall planar configuration. They display similar structure in solution, except in some cases, the η2-(C,C) coordination mode is also detected. A combination of kinetic analysis and DFT calculations reveals the complexes undergo thermal decomposition by isomerization from η2-(C,O) to η2-(C,C) followed by scission of the C═C bond, which is usually rate limiting and results in an intermediate carbonyl carbene complex. Subsequent rearrangement of the carbene ligand is rate limiting for electron poor and sterically large ketenes, and results in a carbonyl alkene complex. The alkene readily dissociates, affording alkenes and (dppf)Ni(CO)2. Computational modeling of the decarbonylation pathway with partial phosphine dissociation reveals the barrier is reduced significantly, explaining the instability of ketene complexes with monodentate phosphines.

Anion Effects in Oxidative Aliphatic Carbon-Carbon Bond Cleavage Reactions of Cu(II) Chlorodiketonate Complexes.

Aliphatic oxidative carbon-carbon bond cleavage reactions involving Cu(II) catalysts and O2 as the terminal oxidant are of significant current interest. However, little is currently known regarding how the nature of the Cu(II) catalyst, including the anions present, influence the reaction with O2. In previous work, we found that exposure of the Cu(II) chlorodiketonate complex [(6-Ph2TPA)Cu(PhC(O)CClC(O)Ph)]ClO4 (1) to O2 results in oxidative aliphatic carbon-carbon bond cleavage within the diketonate unit, leading to the formation of benzoic acid, benzoic anhydride, benzil, and 1,3-diphenylpropanedione as organic products. Kinetic studies of this reaction revealed a slow induction phase followed by a rapid decay of the absorption features of 1. Notably, the induction phase is not present when the reaction is performed in the presence of a catalytic amount of chloride anion. In the studies presented herein, a combination of spectroscopic (UV-vis, EPR) and density functional theory (DFT) methods have been used to examine the chloride and benzoate ion binding properties of 1 under anaerobic conditions. These studies provide evidence that each anion coordinates in an axial position of the Cu(II) center. DFT studies reveal that the presence of the anion in the Cu(II) coordination sphere decreases the barrier for O2 activation and the formation of a Cu(II)-peroxo species. Notably, the chloride anion more effectively lowers the barrier associated with O-O bond cleavage. Thus, the nature of the anion plays an important role in determining the rate of reaction of the diketonate complex with O2. The same type of anion effects were observed in the O2 reactivity of the simple Cu(II)-bipyridine complex [(bpy)Cu(PhC(O)C(Cl)C(O)Ph)ClO4] (3).

Halide-promoted dioxygenolysis of a carbon-carbon bond by a copper(II) diketonate complex.

A mononuclear Cu(II) chlorodiketonate complex was prepared, characterized, and found to undergo oxidative aliphatic carbon-carbon bond cleavage within the diketonate unit upon exposure to O2 at ambient temperature. Mechanistic studies provide evidence for a dioxygenase-type C-C bond cleavage reaction pathway involving trione and hypochlorite intermediates. Significantly, the presence of a catalytic amount of chloride ion accelerates the oxygen activation step via the formation of a Cu-Cl species, which facilitates monodentate diketonate formation and lowers the barrier for O2 activation. The observed reactivity and chloride catalysis is relevant to Cu(II) halide-catalyzed reactions in which diketonates are oxidatively cleaved using O2 as the terminal oxidant. The results of this study suggest that anion coordination can play a significant role in influencing copper-mediated oxygen activation in such systems.

Structure and properties of nitrogen-rich 1,4-dicyanotetrazine, C4N6: a comparative study with related tetracyano electron acceptors.

The crystal structure, redox electrochemical stability, and reaction chemistry of 1,4-dicyanotetrazine (DCNT) has been experimentally characterized. These experimental results were rationalized by the results of theoretical calculations of the electronic structure, spin and charge distributions, electronic absorption spectra, and electron affinity and compared with the results for related the tetracyano electron acceptors tetracyanoethylene (TCNE), 7,7,8,8-tetracyano-p-quinodimethane (TCNQ), and 2,3,5,6-tetracyanopyrazine (TCNP). DCNT is made from the dehydration of 1,2,4,5-tetrazine-3,6-dicarboxamide, and because of the unusual deep-magenta color of the dicarboxamide in the solid state, its hydrogen-bonded layered structure, electronic structure, and electronic absorption spectra were determined. The magenta color is attributed to its absorptions at 532 nm (18 800 cm(-1)), and this corresponds to normalized chromaticity coordinates of x = 0.42 and y = 0.31 in the pink/red/orange part of the 1931 CIE chromaticity diagram. In contrast with previous reports, DCNT exhibits an irreversible one-electron reduction at -0.09 V vs SCE (MeCN), and reduced forms of DCNT have yet to be isolated and characterized. In addition, the reactions of DCNT with V(CO)6, Fe(II)(C5Me5)2, and I(-) are discussed.

Regioselective aliphatic carbon-carbon bond cleavage by a model system of relevance to iron-containing acireductone dioxygenase.

Mononuclear Fe(II) complexes ([(6-Ph(2)TPA)Fe(PhC(O)C(R)C(O)Ph)]X (3-X: R = OH, X = ClO(4) or OTf; 4: R = H, X = ClO(4))) supported by the 6-Ph(2)TPA chelate ligand (6-Ph(2)TPA = N,N-bis((6-phenyl-2-pyridyl)methyl)-N-(2-pyridylmethyl)amine) and containing a ß-diketonate ligand bound via a six-membered chelate ring have been synthesized. The complexes have all been characterized by (1)H NMR, UV-vis, and infrared spectroscopy and variably by elemental analysis, mass spectrometry, and X-ray crystallography. Treatment of dry CH(3)CN solutions of 3-OTf with O(2) leads to oxidative cleavage of the C(1)-C(2) and C(2)-C(3) bonds of the acireductone via a dioxygenase reaction, leading to formation of carbon monoxide and 2 equiv of benzoic acid as well as two other products not derived from dioxygenase reactivity: 2-oxo-2-phenylethylbenzoate and benzil. Treatment of CH(3)CN/H(2)O solutions of 3-X with O(2) leads to the formation of an additional product, benzoylformic acid, indicative of the operation of a new reaction pathway in which only the C(1)-C(2) bond is cleaved. Mechanistic studies show that the change in regioselectivity is due to the hydration of a vicinal triketone intermediate in the presence of both an iron center and water. This is the first structural and functional model of relevance to iron-containing acireductone dioxygenase (Fe-ARD'), an enzyme in the methionine salvage pathway that catalyzes the regiospecific oxidation of 1,2-dihydroxy-3-oxo-(S)-methylthiopentene to form 2-oxo-4-methylthiobutyrate. Importantly, this model system is found to control the regioselectivity of aliphatic carbon-carbon bond cleavage by changes involving an intermediate in the reaction pathway, rather than by the binding mode of the substrate, as had been proposed in studies of acireductone enzymes.

Pb(II)-promoted amide cleavage: mechanistic comparison to a Zn(II) analogue.

Two new Pb(II) complexes of the amide-appended nitrogen/sulfur epppa (N-((2-ethylthio)ethyl)-N-((6-pivaloylamido-2-pyridyl)methyl)-N-((2-pyridyl)methyl)amine) chelate ligand, [(epppa)Pb(NO3)2] (4-NO3) and [(epppa)Pb(ClO4)2] (4-ClO4), were prepared and characterized. In the solid state, 4-NO3 exhibits κ(5)-epppa chelate ligand coordination as well as the coordination of two bidentate nitrate ions. In acetonitrile, 4-NO3 is a 1:1 electrolyte with a coordinated NO3(-), whereas 4-ClO4 is a 1:2 electrolyte. Treatment of 4-ClO4 with 1 equiv Me4NOH·5H2O in CH3CN:CH3OH (3:5) results in amide methanolysis in a reaction that is akin to that previously reported for the Zn(II) analogue [(epppa)Zn](ClO4)2 (3-ClO4). (1)H NMR kinetic studies of the amide methanolysis reactions of 4-ClO4 and 3-ClO4 as a function of temperature revealed free energies of activation of 21.3 and 24.5 kcal/mol, respectively. The amide methanolysis reactions of 4-ClO4 and 3-ClO4 differ in terms of the effect of the concentration of methanol (saturation kinetics for 4-ClO4; second-order behavior for 3-ClO4), the observation of a small solvent kinetic isotope effect (SKIE) only for the reaction of the Zn(II)-containing 3-ClO4, and the properties of an initial intermediate isolated from each reaction upon treatment with Me4NOH·5H2O. These experimental results, combined with computational studies of the amide methanolysis reaction pathways of 4-ClO4 and 3-ClO4, indicate that the Zn(II)-containing 3-ClO4 initially undergoes amide deprotonation upon treatment with Me4NOH·5H2O. Subsequent amide protonation from coordinated methanol yields a structure containing a coordinated neutral amide and methoxide anion from which amide cleavage can then proceed. The rate-determining step in this pathway is either amide protonation or protonation of the leaving group. The Pb(II)-containing 4-ClO4 instead directly forms a neutral amide-containing, epppa-ligated Pb(II)-OH/Pb(II)-OCH3 equilibrium mixture upon treatment with Me4NOH·5H2O in methanol. The rate-determining step in the amide methanolysis pathway of 4-ClO4 is nucleophilic attack of the Pb(II)-OCH3 moiety on the coordinated amide. Overall, it is the larger size of the Pb(II) center and the availability of coordination positions that enable direct formation of a Pb(II)-OH/Pb(II)-OCH3 mixture versus the initial amide deprotonation identified in the reaction of the Zn(II)-containing 3-ClO4.

First row transition metal(II) thiocyanate complexes, and formation of 1-, 2-, and 3-dimensional extended network structures of M(NCS)2(solvent)2 (M = Cr, Mn, Co) composition.

The reaction of first row transition M(II) ions with KSCN in various solvents form tetrahedral (NMe4)2[M(II)(NCS)4] (M = Fe, Co), octahedral trans-M(II)(NCS)2(Sol)4 (M = Fe, V, Ni; Sol = MeCN, THF), and K4[M(II)(NCS)6] (M = V, Ni). The reaction of M(NCS)2(OCMe2)2 (M = Cr, Mn) in MeCN and [Co(NCMe)6](BF4)2 and KSCN in acetone and after diffusion of diethyl ether form M(NCS)2(Sol)2 that structurally differ as they form one-dimensional (1-D) (M = Co; Sol = THF), two-dimensional (2-D) (M = Mn; Sol = MeCN), and three-dimensional (3-D) (M = Cr; Sol = MeCN) extended structures. 1-D Co(NCS)2(THF)2 has trans-THFs, while the acetonitriles have a cis geometry for 2- and 3-D M(NCS)2(NCMe)2 (M = Cr, Mn). 2-D Mn(NCS)2(NCMe)2 is best described as Mn(II)(µ(N,N)-NCS)(µ(N,S)-NCS)(NCMe)2 [= Mn2(µ(N,N)-NCS)2(µ(N,S)-NCS)2(NCMe)4] with the latter µ(N,S)-NCS providing the 2-D connectivity. In addition, the reaction of Fe(NCS)2(OCMe2)2 and 7,7,8,8-tetracyanoquino-p-dimethane (TCNQ) forms 2-D structured Fe(II)(NCS)2TCNQ. The magnetic behavior of 1-D Co(NCS)2(THF)2 can be modeled by a 1-D Fisher expression (H = -2JS(i)·S(j)) with g = 2.4 and J/kB = 0.68 K (0.47 cm(-1)) and exhibit weak ferromagnetic coupling. Cr(NCS)2(NCMe)2 and Fe(II)(NCS)2TCNQ magnetically order as antiferromagnets with Tc's of 37 and 29 K, respectively, while Mn(NCS)2(NCMe)2 exhibits strong antiferromagnetic coupling. M(NCS)2(THF)4 and K4[M(NCS)6] (M = V, Ni) are paramagnets with weak coupling between the octahedral metal centers.

endo,endo-Tetra-cyclo-[6.2.1.1(3,6).0(2,7)]dodeca-9-en-anti-11-yl 4-bromo-benzoate.

The title compound 1-OPBB, C(19)H(19)BrO(2), contains a dechlorinated and hydrogenated isodrin backbone with an anti-4-bromo-benzoate substituent at one of the methano bridges. The dihedral angle between the CO(2) ester plane and the benzene ring plane is 8.5 (2)°. In the crystal, the ester groups stack over benzene rings: the mol-ecules pack as conformational enanti-omers, with nearest parallel benzene ring planes separated by a perpendicular distance of 3.339 (1) Å. The nearest benzene-ring centroids are 5.266 (1) Šapart. Possible structural correlation with enhanced solvolytic reactivity is investigated.

(6S*)-6-[(1S*,2R*)-1,2-Di-hydroxy-pent-yl]-4-meth-oxy-5,6-di-hydro-2H-pyran-2-one.

The title compound, C11H18O5, was isolated from a liquid culture of Pestalotiopsis sp. In the mol-ecule, the pyran-2-one ring assumes a half-chair conformation. The two terminal C atoms of the pentyl group were refined as disordered over two sets of sites, with refined occupancies of 0.881 (10) and 0.119 (10). In the crystal, mol-ecules are linked via O-H⋯O hydrogen bonds forming a three-dimensional network.

Bicyclo-[2.2.1]hept-7-yl p-bromo-benzoate.

The title compound, C(14)H(15)BrO(2), contains a sterically unencumbered norbornyl group. The dihedral angle between the plane of the carboxyl-ate group and the mean plane of the adjacent benzene ring is 5.3 (2)°. The dihedral angle between the plane of the carboxyl-ate group and the norbornyl methano C-O bond is 4.5 (1)°, the methano C atom deviating by 0.141 (2) Šfrom this plane. In the crystal, mol-ecules pack as pairs of enanti-omers, with a distance of 3.747 (1) Šbetween the centroids of nearest parallel benzene rings.

3-Carbamoylquinoxalin-1-ium chloride.

The title compound, C(9)H(8)N(3)O(+)·Cl(-), was isolated from a liquid culture of streptomyces sp. In the cation, the ring system makes a dihedral angle of 0.2 (2)° with the amide group. The protonation creating the cation occurs at ome of the N atoms in the quinoxaline ring system. In the crystal, the ions are linked through N-H⋯O and N-H⋯Cl hydrogen bonds, forming a two-dimensional network parallel to (10[Formula: see text]).

Bicyclo-[2.2.1]hept-2-en-7-yl 4-bromo-benzoate.

The structure of the title compound, C(14)H(13)BrO(2), which contains a norbornenyl group and a 4-bromo-benzoate ester at the single C-atom bridge, has been redetermined [see McDonald & Trotter (1965 ▶). Acta Cryst.19, 456-463] to modern standards to establish high-precision geometrical data to compare with norbornyl and other tetra-cyclic 4-bromo-benzoates. Possible structural evidence is sought to help explain solvolytic reactivities.

Photochemically initiated oxidative carbon-carbon bond-cleavage reactivity in chlorodiketonate Ni(II) complexes.

Three mononuclear Ni(II) complexes containing a 2-chloro-1,3-diketonate ligand and supported by the 6-Ph(2)TPA chelate, as well as analogues that lack the 2-chloro substituent on the ß-diketonate ligand, have been prepared and characterized. Upon irradiation at 350 nm under aerobic conditions, complexes containing the 2-chloro-substituted ligands undergo reactions to generate products resulting from oxidative cleavage, α-cleavage, and radical-derived reactions involving the 2-chloro-1,3-diketonate ligand. Mechanistic studies suggest that the oxidative cleavage reactivity, which leads to the production of carboxylic acids, is a result of the formation of superoxide, which occurs through reaction of reduced nickel complexes with O(2). The presence of the 2-chloro substituent was found to be a prerequisite for oxidative carbon-carbon bond-cleavage reactivity, as complexes lacking this functional group did not undergo these reactions following prolonged irradiation. The approach toward investigating the oxidative reactivity of metal ß-diketonate species outlined herein has yielded results of relevance to the proposed mechanistic pathways of metalloenzyme-catalyzed ß-diketonate oxidative cleavage reactions.

Imidazolidene carboxylate bound MBPh4 complexes (M = Li, Na) and their relevance in transcarboxylation reactions.

Combination of 1,3-bis(2,6-diisopropylphenyl)imidazolum-2-carboxylate (IPrCO(2)) with the Lewis acids MBPh(4), where M = Li or Na, provided two separate complexes. The crystal structures of these complexes revealed that coordination to NaBPh(4) yielded a dimeric species, yet coordination of IPrCO(2) with LiBPh(4) yielded a monomeric species. Combination of 1,3-bis(2,4,6-trimethylphenyl)imidazolum-2-carboxylate (IMesCO(2)) with LiBPh(4) also afforded a dimeric species that was similar in global structure to that of the IPrCO(2)+NaBPh(4) dimer. In all three cases, the cation of the organic salt was coordinated to the oxyanion of the zwitterionic carboxylate. Thermogravimetric analysis of the crystals demonstrated that decarboxylation occurred at lower temperatures than the decarboxylation temperature of the parent NHC·CO(2) (NHC = N-heterocyclic carbene). Kinetic analysis of the transcarboxylation of IPrCO(2) to acetophenone with NaBPh(4) to yield sodium benzoylacetate was performed. First-order dependences were observed for IPrCO(2) and acetophenone, whereas zero -order dependence was observed for NaBPh(4). Direct dicarboxylation was observed when I(t)BuCO(2) was added to MeCN in the absence of added MBPh(4).

Hexanickel enediolate cluster generated in an acireductone dioxygenase model reaction.

A nickel(II) enediolate cluster (2) forms upon treatment of [(6-Ph(2)TPA)Ni(PhC(O)C(OH)C(O)Ph)]ClO(4) (1) with Me(4)NOH x 5 H(2)O in CH(3)CN. Crystallographic studies of 2 revealed a hexanuclear structure of S(6) symmetry with a formula of {[Ni(PhC(O)C(O)C(O)Ph)(CH(3)OH)] x 1.33 CH(3)OH}(6). Because isolation of bulk amounts of 2 from the reaction involving 1 proved impossible, a solvation analogue of 2 (labeled 5) was generated from admixture of Ni(ClO(4))(2) x 6 H(2)O, 2-hydroxy-1,3-diphenylpropane-1,3-dione, and Me(4)NOH x 5 H(2)O in CH(3)OH/CH(3)CN. Complex 5 is formulated as {[Ni(PhC(O)C(O)C(O)Ph)(H(2)O)] x H(2)O x 0.25 CH(3)CN}(6) based on elemental analysis, a molecular weight determination, UV-vis, and a magnetic moment measurement. Treatment of 5 with O(2) and 6-Ph(2)TPA (6 equiv) results in the formation of CO and [(6-Ph(2)TPA)Ni(O(2)CPh)(2)(H(2)O)] (3), the latter of which was isolated in 69% yield. The level of (18)O incorporation in this reaction matches that for a reaction wherein 2 is generated from 1. These results provide evidence that a nickel(II) enediolate cluster is the O(2) reactive species in a previously reported model reaction for nickel(II)-containing acireductone dioxygenase.

Thioester hydrolysis promoted by a mononuclear zinc complex.

The mononuclear zinc complex [(bpta)Zn](ClO(4))(2).0.5H(2)O promotes the hydrolysis of the thioester PhCH(OH)C(O)SCD(3) when dissolved in CH(3)CN:H(2)O (50:50 buffered at pH 9.0). This reaction results in the formation of a mixture of CD(3)SH and a zinc thiolate complex, the latter of which can be protonated to generate additional CD(3)SH. Kinetic studies revealed an overall second-order reaction with an activation energy that is similar to that found for aqueous OH(-) promoted thioester hydrolysis. These studies represent the first investigation of chemistry relevant to that occurring in the monozinc-containing form of human glyoxalase II.

O2-dependent aliphatic carbon-carbon bond cleavage reactivity in a Ni(II) enolate complex having a hydrogen bond donor microenvironment; comparison with a hydrophobic analogue.

A mononuclear Ni(II) complex having an acireductone type ligand, and supported by the bnpapa (N,N-bis((6-neopentylamino-2-pyridyl)methyl)-N-((2-pyridyl)methyl)amine) ligand, [(bnpapa)Ni(PhC(O)C(OH)C(O)Ph)]ClO(4) (14), has been prepared and characterized by elemental analysis, (1)H NMR, FTIR, and UV-vis. To gain insight into the (1)H NMR features of 14, the air stable analogue complexes [(bnpapa)Ni(CH(3)C(O)CHC(O)CH(3))]ClO(4) (16) and [(bnpapa)Ni(ONHC(O)CH(3))]ClO(4) (17) were prepared and characterized by X-ray crystallography, (1)H NMR, FTIR, UV-vis, mass spectrometry, and solution conductivity measurements. Compounds 16 and 17 are 1:1 electrolyte species in CH(3)CN. (1)H and (2)H NMR studies of 14, 16, and 17 and deuterated analogues revealed that the complexes having six-membered chelate rings for the exogenous ligand (14 and 16) do not have a plane of symmetry within the solvated cation and thus exhibit more complicated (1)H NMR spectra. Compound 17, as well as other simple Ni(II) complexes of the bnpapa ligand (e.g., [(bnpapa)Ni(ClO(4))(CH(3)CN)]ClO(4) (18) and [(bnpapaNi)(2)(mu-Cl)(2)](ClO(4))(2) (19)), exhibit (1)H NMR spectra consistent with the presence of a plane of symmetry within the cation. Treatment of [(bnpapa)Ni(PhC(O)C(OH)C(O)Ph)]ClO(4) (14) with O(2) results in aliphatic carbon-carbon bond cleavage within the acireductone-type ligand and the formation of [(bnpapa)Ni(O(2)CPh)]ClO(4) (9), benzoic acid, benzil, and CO. Use of (18)O(2) in the reaction gives high levels of incorporation (>80%) of one labeled oxygen atom into 9 and benzoic acid. The product mixture and level of (18)O incorporation in this reaction is different than that exhibited by the analogue supported the hydrophobic 6-Ph(2)TPA ligand, [(6-Ph(2)TPA)Ni(PhC(O)C(OH)C(O)Ph)]ClO(4) (2). We propose that this difference is due to variations in the reactivity of bnpapa- and 6-Ph(2)TPA-ligated Ni(II) complexes with triketone and/or peroxide species produced in the reaction pathway.

Synthesis, characterization, and ligand exchange reactivity of a series of first row divalent metal 3-hydroxyflavonolate complexes.

A series of divalent metal flavonolate complexes of the general formula [(6-Ph(2)TPA)M(3-Hfl)]X (1-5-X; X = OTf(-) or ClO(4)(-); 6-Ph(2)TPA = N,N-bis((6-phenyl-2-pyridyl)methyl)-N-((2-pyridyl)methyl)amine; M = Mn(II), Co(II), Ni(II), Cu(II), Zn(II); 3-Hfl = 3-hydroxyflavonolate) were prepared and characterized by X-ray crystallography, elemental analysis, FTIR, UV-vis, (1)H NMR or EPR, and cyclic voltammetry. All of the complexes have a bidentate coordinated flavonolate ligand. The difference in M-O distances (Delta(M-O)) involving this ligand varies through the series, with the asymmetry of flavonolate coordination increasing in the order Mn(II) approximately Ni(II) < Cu(II) < Zn(II) < Co(II). The hypsochromic shift of the absorption band I (pi-->pi*) of the coordinated flavonolate ligand in 1-5-OTf (relative to that in free anion) increases in the order Ni(II) < Mn(II) < Cu(II) < Zn(II), Co(II). Previously reported 3-Hfl complexes of divalent metals fit well with this ordering. (1)H NMR studies indicate that the 3-Hfl complexes of Co(II), Ni(II), and Zn(II) exhibit a pseudo-octahedral geometry in solution. EPR studies suggest that the Mn(II) complex 1-OTf may form binuclear structures in solution. The mononuclear Cu(II) complex 4-OTf has a distorted square pyramidal geometry. The oxidation potential of the flavonolate ligand depends on the metal ion present and/or the solution structure of the complex, with the Mn(II) complex 1-OTf exhibiting the lowest potential, followed by the pseudo-octahedral Ni(II) and Zn(II) 3-Hfl complexes, and the distorted square pyramidal Cu(II) complex 4-OTf. The Mn(II) complex [(6-Ph(2)TPA)Mn(3-Hfl)]OTf (1-OTf) is unique in the series in undergoing ligand exchange reactions in the presence of M(ClO(4))(2).6H(2)O (M = Co, Ni, Zn) in CD(3)CN to produce [(6-Ph(2)TPA)M(CD(3)CN)(n)](X)(2), [Mn(3-Hfl)(2).0.5H(2)O], and MnX(2) (X = OTf(-) or ClO(4)(-)). Under similar conditions, the 3-Hfl complexes of Co(II), Ni(II), and Cu(II) undergo flavonolate ligand exchange to produce [(6-Ph(2)TPA)M(CD(3)CN)(n)](X)(2) (M = Co, Ni, Cu; n = 1 or 2) and [Zn(3-Hfl)(2).2H(2)O]. An Fe(II) complex of 3-Hfl, [(6-Ph(2)TPA)Fe(3-Hfl)]ClO(4) (8), was isolated and characterized by elemental analysis, FTIR, UV-vis, (1)H NMR, cyclic voltammetry, and a magnetic moment measurement. This complex reacts with O(2) to produce the diiron(III) mu-oxo compound [(6-Ph(2)TPAFe(3Hfl))(2)(mu-O)](ClO(4))(2) (6).

Charge density analysis of the (C-C)-->Ti agostic interactions in a titanacyclobutane complex.

The experimental electron density study of Ti(C(5)H(4)Me)(2)[(CH(2))(2)CMe(2)] provides direct evidence for the presence of (C-C)-->Ti agostic interactions. In accord with the model of Scherer and McGrady, the C(alpha)-C(beta) bond densities no longer show cylindrical symmetry in the vicinity of the Ti atom and differ markedly from those of the other C-C bonds. At the points along the C(alpha)-C(beta) bond where the deviation is maximal the electron density is elongated toward the metal center. The distortion is supported by parallel theoretical calculations. A calculation on an Mo complex in which the agostic interaction is absent supports the Scherer and McGrady criterion for agostic interactions. Despite the formal d(0) electron configuration for this Ti(IV) species, a significant nonzero population is observed for the d orbitals, the d orbital population is largest for the d(xy) orbital, the lobes of which point toward the two C(alpha) atoms. Of the three different basis sets for the Ti atom used in theoretical calculations with the B3LYP functional, only the 6-311++G** set for Ti agrees well with the experimental charge density distribution in the Ti-(C(alpha)-C(beta))(2) plane.

Poly[1-ethyl-3-methyl-imidazolium [tri-µ-chlorido-chromate(II)]].

The title compound, {(C(6)H(11)N(2))[CrCl(3)]}(n), was generated via mixing of the ionic liquid 1-ethyl-3-methyl-imidazolium chloride with CrCl(2) in ethanol. Crystals were obtained by a diffusion method. In the crystal structure, the anion forms one-dimensional chains of chloride-bridged Jahn-Teller distorted chromium(II) centers extending along the [100] direction. The imidazolium cations are positioned between these chains.