RESUMO
Micro-light emitting diodes (µ-LEDs) are considered the key enabler for various high-resolution micro-display applications such as augmented reality, smartphones or head-up displays. Within this study we fabricated nitride-based µ-LED arrays in a thin film chip architecture with lateral pixel sizes down to 1 µm. A metal mirror on the p-side enhances the light outcoupling via the n-side after removal of the epitaxial growth substrate. Mounted devices with pixel sizes ranging from 1×1 to 8×8 µm2 were electro-optically characterized within an integrating sphere and in a goniometer system. We measure increased external quantum efficiencies on smaller devices due to a higher light extraction efficiency (LEE) as predicted by wave optical simulations. Besides this size dependence of the LEE, also the far field properties show a substantial change with pixel size. In addition, we compared µ-LEDs with 40 nm and 80 nm thick aluminium oxide around the pixel mesa. Considerably different far field patterns were observed which indicate the sensitivity of optical properties to any design changes for tiny µ-LEDs. The experimentally obtained radiation behavior could be reasonably predicted by finite-difference time-domain simulations. This clearly reveals the importance of understanding and modeling wave optical effects inside µ-LED devices and the resulting impact on their optical performance.
RESUMO
Micro-light emitting diodes (µ-LEDs) suffer from a drastic drop in internal quantum efficiency that emerges with the miniaturization of pixels down to the single micrometer size regime. In addition, the light extraction efficiency (LEE) and far field characteristics change significantly as the pixel size approaches the wavelength of the emitted light. In this work, we systematically investigate the fundamental optical properties of nitride-based µ-LEDs with the focus on pixel sizes from 1 µm to 5 µm and various pixel sidewall angles from 0∘ to 60∘ using finite-difference time-domain simulations. We find that the LEE strictly increases with decreasing pixel size, resulting in a LEE improvement of up to 45% for a 1 µm pixel compared to a 20 µm pixel. The ideal pixel sidewall angle varies between 35∘ and 40∘, leading to a factor of 1.4 enhancement with respect to vertical pixel sidewalls. For pixel sizes in the order of 2 µm and smaller, a substantial transition of far field properties can be observed. Here, the far field shape depends severely on the pixel sidewall angle and affects the LEE within a solid angle of ±15∘. Moreover, we investigate the impact of emission wavelength and observe major differences in optical characteristics for blue, green and red emitting pixels, which is relevant for real-world applications. Finally, we discuss the implications of the assumptions we made and their significance for the design of µ-LEDs.
RESUMO
Nitride-based three-dimensional core-shell nanorods (NRs) are promising candidates for the achievement of highly efficient optoelectronic devices. For a detailed understanding of the complex core-shell layer structure of InGaN/GaN NRs, a systematic determination and correlation of the structural, compositional, and optical properties on a nanometer-scale is essential. In particular, the combination of low-temperature cathodoluminescence (CL) spectroscopy directly performed in a scanning transmission electron microscope (STEM), and quantitative high-angle annular dark field imaging enables a comprehensive study of the nanoscopic attributes of the individual shell layers. The investigated InGaN/GaN core-shell NRs, which were grown by metal-organic vapor-phase epitaxy using selective-area growth exhibit an exceptionally low density of extended defects. Using highly spatially resolved CL mapping of single NRs performed in cross-section, we give a direct insight into the optical properties of the individual core-shell layers. Most interesting, we observe a red shift of the InGaN single quantum well from 410 to 471 nm along the nonpolar side wall. Quantitative STEM analysis of the active region reveals an increasing thickness of the single quantum well (SQW) from 6 to 13 nm, accompanied by a slight increase of the indium concentration along the nonpolar side wall from 11% to 13%. Both effects, the increased quantum-well thickness and the higher indium incorporation, are responsible for the observed energetic shift of the InGaN SQW luminescence. Furthermore, compositional mappings of the InGaN quantum well reveal the formation of locally indium rich regions with several nanometers in size, leading to potential fluctuations in the InGaN SQW energy landscape. This is directly evidenced by nanometer-scale resolved CL mappings that show strong localization effects of the excitonic SQW emission.
RESUMO
Besides high-power light-emitting diodes (LEDs) with dimensions in the range of mm, micro-LEDs (µLEDs) are increasingly gaining interest today, motivated by the future applications of µLEDs in augmented reality displays or for nanometrology and sensor technology. A key aspect of this miniaturization is the influence of the structure size on the electrical and optical properties of µLEDs. Thus, in this article, investigations of the size dependence of the electro-optical properties of µLEDs, with diameters in the range of 20 to 0.65 µm, by current-voltage and electroluminescence measurements are described. The measurements indicated that with decreasing size leakage currents in the forward direction decrease. To take advantage of these benefits, the surface has to be treated properly, as otherwise sidewall damages induced by dry etching will impair the optical properties. A possible countermeasure is surface treatment with a potassium hydroxide based solution that can reduce such defects.
RESUMO
The combination of inorganic semiconductors with organic thin films promises new strategies for the realization of complex hybrid optoelectronic devices. Oxidative chemical vapor deposition (oCVD) of conductive polymers offers a flexible and scalable path towards high-quality three-dimensional inorganic/organic optoelectronic structures. Here, hole-conductive poly(3,4-ethylenedioxythiophene) (PEDOT) grown by oxidative chemical vapor deposition is used to fabricate transparent and conformal wrap-around p-type contacts on three-dimensional microLEDs with large aspect ratios, a yet unsolved challenge in three-dimensional gallium nitride technology. The electrical characteristics of two-dimensional reference structures confirm the quasi-metallic state of the polymer, show high rectification ratios, and exhibit excellent thermal and temporal stability. We analyze the electroluminescence from a three-dimensional hybrid microrod/polymer LED array and demonstrate its improved optical properties compared with a purely inorganic microrod LED. The findings highlight a way towards the fabrication of hybrid three-dimensional optoelectronics on the sub-micron scale.
RESUMO
We study the photoluminescence emission from planar and 3D InGaN/GaN LED structures, excited using a femtosecond laser with fluences close to sample's damage threshold. For a typical laser system consisting of a titanium-sapphire regenerative amplifier, which is pumping an optical parametric amplifier delivering output pulses of a few tens of MW pulse power with â¼100 fs pulse duration, 1 kHz repetition rate and a wavelength of 325 nm, we determine the damage threshold of the InGaN/GaN LEDs to be about 0.05 J/cm2. We find that the relative intensity of the GaN photoluminescence (PL) and InGaN PL changes significantly close to the damage threshold. The changes are irreversible once the damage threshold is exceeded. As the damage threshold is approached, the InGaN luminescence band blue-shifts by several tens of meV, which is attributed to band filling effects. The PL decay time reduces substantially, by about 30%, when the excitation energy density is increased by approximately two orders of magnitude. The results are comparable for 2D and 3D LED structures, where in the latter case m-plane QWs exhibit different recombination dynamics because of the absence of the quantum confined Stark effect.
RESUMO
We suggest a method for chemical mapping that is based on scanning transmission electron microscopy (STEM) imaging with a high-angle annular dark field (HAADF) detector. The analysis method uses a comparison of intensity normalized with respect to the incident electron beam with intensity calculated employing the frozen lattice approximation. This procedure is validated with an In(0.07)Ga(0.93)N layer with homogeneous In concentration, where the STEM results were compared with energy filtered imaging, strain state analysis and energy dispersive X-ray analysis. Good agreement was obtained, if the frozen lattice simulations took into account static atomic displacements, caused by the different covalent radii of In and Ga atoms. Using a sample with higher In concentration and series of 32 images taken within 42 min scan time, we did not find any indication for formation of In rich regions due to electron beam irradiation, which is reported in literature to occur for the parallel illumination mode. Image simulation of an In(0.15)Ga(0.85)N layer that was elastically relaxed with empirical Stillinger-Weber potentials did not reveal significant impact of lattice plane bending on STEM images as well as on the evaluated In concentration profiles for specimen thicknesses of 5, 15 and 50 nm. Image simulation of an abrupt interface between GaN and In(0.15)Ga(0.85)N for specimen thicknesses up to 200 nm showed that artificial blurring of interfaces is significantly smaller than expected from a simple geometrical model that is based on the beam convergence only. As an application of the method, we give evidence for the existence of In rich regions in an InGaN layer which shows signatures of quantum dot emission in microphotoluminescence spectroscopy experiments.
RESUMO
In scanning transmission electron microscopy using a high-angle annular dark field detector, image intensity strongly depends on specimen thickness and composition. In this paper we show that measurement of image intensities relative to the intensity of the incoming electron beam allows direct comparison with simulated image intensities, and thus quantitative measurement of specimen thickness and composition. Simulations were carried out with the frozen lattice and absorptive potential multislice methods. The radial inhomogeneity of the detector was measured and taken into account. Using a focused ion beam (FIB) prepared specimen we first demonstrate that specimen thicknesses obtained in this way are in very good agreement with a direct measurement of the thickness of the lamella by scanning electron microscopy in the FIB. In the second step we apply this method to evaluate the composition of Al(x)Ga(1-x)N/GaN layers. We measured ratios of image intensities obtained in regions with unknown and with known Al-concentration x, respectively. We show that estimation of the specimen thickness combined with evaluation of intensity ratios allows quantitative measurement of the composition x. In high-resolution images we find that the image intensity is well described by simulation if the simulated image is convoluted with a Gaussian with a half-width at half-maximum of 0.07 nm.